Create New Route Reference

Adds new rigid piping and bent tubing routes to a pipe run. In addition, it adds new hose routes when the active hose style does not use a subassembly. All routing commands are activated in place for forward creation.

Access:
	With the pipe run active, select a rigid piping, bent tubing, or flexible hosing (with the Use Subassembly check mark cleared on the Tube & Pipe Styles dialog box, Fittings tab) style. Do either of the following: On the ribbon, click Pipe Run tab Route panel New Route . In the Model browser or graphics window, right-click the blank area and select New Route. Ensure that your cursor is not selecting an item in the browser.

Access:

With the pipe run active, select a rigid piping, bent tubing, or flexible hosing (with the Use Subassembly check mark cleared on the Tube & Pipe Styles dialog box, Fittings tab) style. Do either of the following:

On the ribbon, click Pipe Run tab Route panel New Route .
In the Model browser or graphics window, right-click the blank area and select New Route. Ensure that your cursor is not selecting an item in the browser.

New Route File Name	Specifies the unique file name for each route.
New Route File Location	Specifies the location for an individual route. Browse to or enter the needed location in your work space.

Create New Route Reference

Was this information helpful?