M6ROT

Description	Type	Default
Specifies the inertia to be added to the normal rotation for CQUAD4 and CTRIA3 elements. The default AUTO setting will use a value of 1.0E-10 if K6ROT is also set to AUTO. This parameter is ignored for CQUADR and CTRIAR elements. See K6ROT above.	Real AUTO	0.0

Description

Type

Default

Specifies the inertia to be added to the normal rotation for CQUAD4 and CTRIA3 elements. The default AUTO setting will use a value of 1.0E-10 if K6ROT is also set to AUTO. This parameter is ignored for CQUADR and CTRIAR elements. See K6ROT above.

Real

AUTO

0.0

M6ROT

Was this information helpful?