This section contains information on parameters and calculations according to the SNiP II-23-81 and SP16.13330.2017 codes.
Note: The SP16.13330.2017 code replaces the former SNiP II-23-81 version of the code for steel structures.
Share
Steel Codes SNiP II-23-81 and SP16.13330.2017 (Russia)
Topics in this section
- Member Definition - Parameters (SP16.13330.2017)
Use this dialog to define the code parameters of a member type according to the SP16.13330.2017 code. - Member Definition - Additional Parameters
Use this dialog to define additional code parameters of a steel member type for the Russian code SP16.13330.2017. - Member Definition - Serviceability (Displacements)
Use this dialog to define additional parameters determining the limit displacement values. - Location of transverse stiffeners
Use this dialog to determine stiffener positions along the member length. - Buckling Types
Use this dialog to define buckling length of members for the Russian code SP16.13330.2017. - Load Level
Use this dialog to define the load level used during the verification of lateral buckling conditions. - Load Type
Use this dialog to define the load pattern of the analyzed beam. - Lateral Buckling Length Coefficient
Use this dialog to determine the appropriate distances between member sections protected against torsion. - Configuration
Use this dialog to define the parameters to apply during the verification of a steel member according to the Russian steel code. - Characteristic Points
Use this dialog to define coordinates of the characteristic points, for which member calculations or verifications will be performed. - Limit Slenderness Values
Use this dialog to define limit values of slenderness of members subjected to compression and tension. - Manual Verification
Use this dialog to verify steel members subjected to the action of user-defined internal forces, according to the requirements of the Russian steel code SP16.13330.2011.
Parent topic: Steel Codes