C Properties Reference (ActiveX)

These ActiveX properties all start with 'C'.

Properties

• CanonicalMediaName

  Specifies the paper size by name.

• Caption

  Gets the text that the user sees displayed for the application or a menu item.

• CategoryName

  Specifies the category name of a view.

• Center

  Specifies the center of an arc, circle, ellipse, view, or viewport.

• CenterMarkSize

  Specifies the size of the center mark for radial and diameter dimensions.

• CenterPlot

  Specifies the centering of the plot on the media.

• CenterPoint

  Specifies the center of the arc.

• CenterType

  Specifies the type of center mark for radial and diameter dimensions.

• Centroid

  Gets the center of area or mass for a region or solid.

• Check

  Specifies the check status for the popup menu item.

• ChordPoint

  Specifies the chord point for the arc.

• Circumference

  Specifies the circumference of a circle.

• Clipped

  Determines if the viewport has been clipped.

• ClippingEnabled

  Enables or disables the clipping boundary.

• Closed

  Specifies whether the 3D polyline, lightweight polyline, lofted surface, polyline, or spline is open or closed.

• Closed2

  Specifies whether the spline is open or closed.

• Color

  Specifies the color of an object or layer.

• ColorBookPath

  Sets the color book path.

• ColorIndex

  Specifies the color index.

• ColorMethod

  Specifies the color method.

• ColorName

  Specifies the name (if any) of the color.

• ColorScheme

  Specifies the color scheme to display point cloud.

• Columns

  Specifies the number of columns in a block array or table.

• ColumnSpacing

  Specifies the spacing of the columns in a block array.

• ColumnWidth

  Specifies the uniform width of all columns in the table.

• CommandDisplayName

  Specifies the displayed command name for a button on the toolbar.

• Comment

  Specifies the comment to be included with a digital signature.

• Comments

  Specifies the comments for the block or drawing.

• ConfigFile

  Gets the location of the configuration file used to store hardware device driver information.

• ConfigName

  Specifies the plotter configuration name.

• Constant

  Specifies whether the attribute or attribute reference is constant or not.

• ConstantWidth

  Specifies a global width for all segments in a polyline.

• Constrain

  Controls which property is constrained when editing other property values.

• ContentBlockName

  The name of the content block.

• ContentBlockType

  The type of the content block.

• ContentType

  Specifies the content type.

• ContinuousPlotLog

  Specifies whether to save a continuous Plot log.

• ContourlinesPerSurface

  Specifies the number of contour lines (isolines) per surface on objects.

• Contrast

  Specifies the current contrast value of an image or underlay.

• ControlPoints

  Specifies the control points of a spline.

• Coordinate

  Specifies the coordinate of a single vertex in the object.

• Coordinates

  Specifies the coordinates for each vertex in the object.

• Count

  Gets the number of items in the object.

• CreaseLevel

  Specifies the crease level for the subentity of the SubD mesh.

• CreaseType

  Specifies the crease type to apply to the subentity of a SubD mesh.

• CreateBackup

  Specifies the use of a backup file.

• CurrentSectionType

  Specifies the current section type.

• CursorSize

  Specifies the crosshairs size as a percentage of the screen size.

• CurveTangencyLinesColor

  Specifies the color of curve tangency lines.

• CurveTangencyLinesLayer

  Specifies the layer of curve tangency lines.

• CurveTangencyLinesLinetype

  Specifies the linetype of curve tangency lines.

• CurveTangencyLinesLinetypeScale

  Specifies the linetype scale of curve tangency lines.

• CurveTangencyLinesLineweight

  Specifies the line weight of curve tangency lines.

• CurveTangencyLinesPlotStyleName

  Specifies the plot style name of curve tangency lines.

• CurveTangencyLinesVisible

  Specifies the visibility of curve tangency lines.

• CustomDictionary

  Specifies a custom dictionary to use if you have one.

• CustomIconPath

  Specifies the search path for custom icons.

• CustomScale

  Specifies the custom scale factor for the viewport.

• CvHullDisplay

  Specifies if the control vertices (CV) Hull is displayed for the NURBS surface.