D Commands

Topics in this section

• DATALINK (Command)
  Displays the Data Link dialog box.
• DATALINKUPDATE (Command)
  Updates data to or from an established external data link.
• DCDISPLAY (Command)
  Displays or hides the dynamic constraints associated with a selection set of objects.
• DDEDIT (Command)
  Edits single-line text, dimension text, attribute definitions, and feature control frames.
• DDPTYPE (Command)
  Specifies the display style and size of point objects.
• DELAY (Command)
  Provides a timed pause within a script.
• DELCONSTRAINT (Command)
  Removes all geometric and dimensional constraints from a selection set of objects.
• DIM and DIM1
  Accesses Dimensioning mode commands.
• DIMALIGNED (Command)
  Creates an aligned linear dimension.
• DIMANGULAR (Command)
  Creates an angular dimension.
• DIMARC (Command)
  Creates an arc length dimension.
• DIMBASELINE (Command)
  Creates a linear, angular, or ordinate dimension from the baseline of the previous or selected dimension.
• DIMBREAK (Command)
  Breaks or restores dimension and extension lines where they cross other objects.
• DIMCENTER (Command)
  Creates the center mark or the centerlines of circles and arcs.
• DIMCONTINUE (Command)
  Creates a dimension that starts from an extension line of a previously created dimension.
• DIMDIAMETER (Command)
  Creates a diameter dimension for a circle or an arc.
• DIMDISASSOCIATE (Command)
  Removes associativity from selected dimensions.
• DIMEDIT (Command)
  Edits dimension text and extension lines.
• DIMINSPECT (Command)
  Adds or removes inspection information for a selected dimension.
• DIMJOGGED (Command)
  Creates jogged dimensions for circles and arcs.
• DIMJOGLINE (Command)
  Adds or removes a jog line on a linear or aligned dimension.
• DIMLINEAR (Command)
  Creates a linear dimension.
• DIMORDINATE (Command)
  Creates ordinate dimensions.
• DIMOVERRIDE (Command)
  Controls overrides of system variables used in selected dimensions.
• DIMRADIUS (Command)
  Creates a radius dimension for a circle or an arc.
• DIMREASSOCIATE (Command)
  Associates or reassociates selected dimensions to objects or points on objects.
• DIMREGEN (Command)
  Updates the locations of all associative dimensions.
• DIMROTATED (Command)
  Creates a rotated linear dimension.
• DIMSPACE (Command)
  Adjusts the spacing between linear dimensions or angular dimensions.
• DIMSTYLE (Command)
  Creates and modifies dimension styles.
• DIMTEDIT (Command)
  Moves and rotates dimension text and relocates the dimension line.
• DIST (Command)
  Measures the distance and angle between two points.
• DIVIDE (Command)
  Creates evenly spaced point objects or blocks along the length or perimeter of an object.
• DONUT (Command)
  Creates a filled circle or a wide ring.
• DRAGMODE (Command)
  Controls the way dragged objects are displayed.
• DRAWINGRECOVERY (Command)
  Displays a list of drawing files that can be recovered after a program or system failure.
• DRAWINGRECOVERYHIDE (Command)
  Closes the Files Recovered dialog box.
• DRAWORDER (Command)
  Changes the draw order of images and other objects.
• DSETTINGS (Command)
  Sets grid and snap, polar and object snap tracking, object snap modes, and Dynamic Input.