D Commands

Topics in this section

DATALINK (Command)
Displays the Select Reference File box.
DATALINKUPDATE (Command)
Updates data to or from an established external data link.
DBLIST (Command)
Lists database information for each object in the drawing.
DCALIGNED (Command)
Constrains the distance between two points on different objects.
DCANGULAR (Command)
Constrains the angle between line or polyline segments, the angle swept out by an arc or a polyline arc segment, or the angle between three points on objects.
DCCONVERT (Command)
Converts associative dimensions to dimensional constraints.
DCDIAMETER (Command)
Constrains the diameter of a circle or an arc.
DCDISPLAY (Command)
Displays or hides the dynamic constraints associated with a selection set of objects.
DCFORM (Command)
Specifies whether the dimensional constraint being created is dynamic or annotational.
DCHORIZONTAL (Command)
Constrains the X distance between points on an object, or between two points on different objects.
DCLINEAR (Command)
Creates a horizontal, vertical, or rotated constraint based on the locations of the extension line origins and the dimension line.
DCRADIUS (Command)
Constrains the radius of a circle or an arc.
DCVERTICAL (Command)
Constrains the Y distance between points on an object, or between two points on different objects.
DDEDIT (Command)
Edits single-line text, dimension text, attribute definitions, and feature control frames.
DDPTYPE (Command)
Specifies the display style and size of point objects.
DELAY (Command)
Provides a timed pause within a script.
DELCONSTRAINT (Command)
Removes all geometric and dimensional constraints from a selection set of objects.
DIM (Command)
Creates multiple types of dimensions within a single command session.
DIMALIGNED (Command)
Creates an aligned linear dimension.
DIMANGULAR (Command)
Creates an angular dimension.
DIMARC (Command)
Creates an arc length dimension.
DIMBASELINE (Command)
Creates a linear, angular, or ordinate dimension from the baseline of the previous or selected dimension.
DIMBREAK (Command)
Breaks or restores dimension and extension lines where they cross other objects.
DIMCENTER (Command)
Creates the center mark or the centerlines of circles and arcs.
DIMCONSTRAINT (Command)
Applies dimensional constraints to selected objects or points on objects, or converts associative dimensions to dimensional constraints.
DIMCONTINUE (Command)
Creates a dimension that starts from an extension line of a previously created dimension.
DIMDIAMETER (Command)
Creates a diameter dimension for a circle or an arc.
DIMDISASSOCIATE (Command)
Removes associativity from selected dimensions.
DIMEDIT (Command)
Edits dimension text and extension lines.
DIMINSPECT (Command)
Adds or removes inspection information for a selected dimension.
DIMJOGGED (Command)
Creates jogged dimensions for circles and arcs.
DIMJOGLINE (Command)
Adds or removes a jog line on a linear or aligned dimension.
DIMLINEAR (Command)
Creates a linear dimension.
DIMORDINATE (Command)
Creates ordinate dimensions.
DIMOVERRIDE (Command)
Controls overrides of system variables used in selected dimensions.
DIMRADIUS (Command)
Creates a radius dimension for a circle or an arc.
DIMREASSOCIATE (Command)
Associates or reassociates selected dimensions to objects or points on objects.
DIMREGEN (Command)
Updates the locations of all associative dimensions.
DIMROTATED (Command)
Creates a rotated linear dimension.
DIMSPACE (Command)
Adjusts the spacing between linear dimensions or angular dimensions.
DIMSTYLE (Command)
Creates and modifies dimension styles.
DIMTEDIT (Command)
Moves and rotates dimension text and relocates the dimension line.
DIST (Command)
Measures the distance and angle between two points.
DISTANTLIGHT (Command)
Creates a distant light.
DIVIDE (Command)
Creates evenly spaced point objects or blocks along the length or perimeter of an object.
DONUT (Command)
Creates a filled circle or a wide ring.
DRAGMODE (Command)
Controls the way dragged objects are displayed.
DRAWINGRECOVERY (Command)
Displays a list of drawing files that can be recovered after a program or system failure.
DRAWINGRECOVERYHIDE (Command)
Closes the Files Recovered dialog box.
DRAWORDER (Command)
Changes the draw order of images and other objects.
DSETTINGS (Command)
Sets grid and snap, polar and object snap tracking, object snap modes, and Dynamic Input.
DVIEW (Command)
Defines parallel projection or perspective views by using a camera and target.
DXBIN (Command)
Imports an AutoCAD DXB (drawing interchange binary) file.