PFSimpleAction Class Reference

#include <PFSimpleAction.h>

Inheritance diagram for PFSimpleAction:

Public Member Functions
PFExport	PFSimpleAction ()
virtual PFExport	~PFSimpleAction ()
virtual PFExport BaseInterface *	GetInterface (Interface_ID id)
virtual PFExport void	DeleteThis ()
	Deletes an instance of this class. More...
virtual int	NumSubs ()
virtual PFExport Animatable *	SubAnim (int i)
virtual PFExport MSTR	SubAnimName (int i)
PFExport BOOL	SelectSubAnim (int subNum)
virtual PFExport ParamDimension *	GetParamDimension (int i)
virtual PFExport int	SubNumToRefNum (int subNum)
virtual BOOL	CanCopyAnim ()
virtual PFExport int	HasSubElements (int type)
virtual BOOL	CanDeleteSubAnim (int i)
virtual BOOL	IsAnimated ()
virtual void	FreeCaches ()
virtual int	NumParamBlocks ()
virtual PFExport IParamBlock2 *	GetParamBlock (int i)
virtual PFExport IParamBlock2 *	GetParamBlockByID (short id)
virtual int	NumRefs ()
	Returns the total number of references this ReferenceMaker can hold. More...
virtual PFExport RefTargetHandle	GetReference (int i)
	Returns the 'i-th' reference. More...
virtual PFExport RefResult	NotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID &partID, RefMessage message, BOOL propagate)
	Receives and responds to messages. More...
virtual PFExport int	RemapRefOnLoad (int iref)
	Used to load old files with references. More...
virtual PFExport IOResult	Save (ISave *isave)
	Called for saving data. More...
virtual PFExport IOResult	Load (ILoad *iload)
	Called for loading data. More...
virtual PFExport void	NotifyTarget (int message, ReferenceMaker *hMaker)
	Sends messages to ReferenceTargets. More...
virtual CreateMouseCallBack *	GetCreateMouseCallBack ()
	This method allows the system to retrieve a callback object used in creating an object in the 3D viewports. More...
virtual BOOL	OKToChangeTopology (MSTR &modName)
	Implemented by the System. More...
virtual void	InitNodeName (MSTR &s)
	Implemented by the System. More...
virtual ObjectState	Eval (TimeValue t)
	This method is called to evaluate the object and return the result as an ObjectState. More...
virtual void	GetClassName (MSTR &s)
	Retrieves the (localizable) name of the plugin class. More...
virtual Class_ID	ClassID ()
	Retrieves a constant that uniquely identifies the plugin class. More...
virtual void	BeginEditParams (IObjParam *ip, ULONG flags, Animatable *prev)=0
virtual void	EndEditParams (IObjParam *ip, ULONG flags, Animatable *next)=0
virtual RefTargetHandle	Clone (RemapDir &remap)=0
	This method is used by 3ds Max to clone an object. More...
virtual const MCHAR *	GetObjectName ()=0
virtual PFExport bool	Init (IObject *pCont, Object *pSystem, INode *node, Tab< Object * > &actions, Tab< INode * > &actionNodes)
	Returns true if the operation has been proceeded successfully. More...
virtual PFExport bool	Release (IObject *pCont)
	See Init(). More...
virtual bool	SupportRand () const
	An Action may carry some chaos/unpredictibility in its processing. More...
virtual int	GetRand ()
	For chaos/unpredictibility action, gets rand value. More...
virtual void	SetRand (int seed)
	For chaos/unpredictibility action, sets rand value. More...
virtual PFExport int	NewRand ()
virtual const ParticleChannelMask &	ChannelsUsed (const Interval &time) const =0
	See Init(). More...
virtual const Interval	ActivityInterval () const =0
	Casting the FPValue->ptr parameter to Tab<Interface_ID>* as in PFExport void ChannelsUsed(...); an Action may have a time interval when the Action is active. More...
virtual PFExport IObject *	GetCurrentState (IObject *pContainer)
	Returns action state (see IPFActionState.h for details). More...
virtual PFExport void	SetCurrentState (IObject *actionState, IObject *pContainer)
	Sets the state of the action to the given state. More...
virtual int	NumPViewParamBlocks () const
virtual PFExport IParamBlock2 *	GetPViewParamBlock (int i) const
virtual ClassDesc *	GetClassDesc () const =0
PFExport void	RefreshUI (WPARAM message, IParamMap2 *map=NULL) const
PFExport void	UpdatePViewUI (ParamID updateID) const
IParamBlock2 *	pblock () const
const RandObjLinker &	randLinker () const
IParamBlock2 *&	_pblock ()
RandObjLinker &	_randLinker ()
Public Member Functions inherited from HelperObject
SClass_ID	SuperClassID ()
	Implemented by the System. More...
int	IsRenderable ()
	Implemented by the System. More...
virtual int	UsesWireColor ()
	Implemented by the System. More...
virtual BOOL	NormalAlignVector (TimeValue t, Point3 &pt, Point3 &norm)
	Objects that don't support the IntersectRay() method (such as helper objects) can implement this method to provide a default vector for use with the normal align command in 3ds Max. More...
Public Member Functions inherited from Object
CoreExport	Object ()
CoreExport	~Object ()
virtual int	DoOwnSelectHilite ()
	If an object wants to draw itself in the 3D viewports in its selected state in some custom manner this method should return nonzero. More...
virtual int	IntersectRay (TimeValue t, Ray &r, float &at, Point3 &norm)
	This method is called to compute the intersection point and surface normal at this intersection point of the ray passed and the object. More...
void	LockObject ()
	Implemented by the System. More...
void	UnlockObject ()
	Implemented by the System. More...
int	IsObjectLocked ()
	Implemented by the System. More...
void	LockChannels (ChannelMask channels)
	Implemented by the System. More...
void	UnlockChannels (ChannelMask channels)
	Implemented by the System. More...
ChannelMask	GetChannelLocks ()
	Implemented by the System. More...
void	SetChannelLocks (ChannelMask channels)
	Implemented by the System. More...
ChannelMask	GetChannelLocks (ChannelMask m)
	Implemented by the System. More...
virtual BOOL	CanCacheObject ()
	This method determines if this object can have channels cached. More...
virtual void	WSStateInvalidate ()
	This is called by a node when the node's world space state has become invalid. More...
virtual BOOL	IsWorldSpaceObject ()
	Returns TRUE if the object as a world space object; otherwise FALSE. More...
CoreExport INode *	GetWorldSpaceObjectNode ()
virtual BOOL	IsParticleSystem ()
CoreExport void	CopyChannelLocks (Object *obj, ChannelMask needChannels)
	Implemented by the System. More...
virtual void	TopologyChanged ()
virtual int	IsDeformable ()
	Indicates whether this object is deformable. More...
virtual int	NumPoints ()
	The points of a deformable object are accessed through a virtual array interface. More...
virtual Point3	GetPoint (int i)
	The points of a deformable object are accessed through a virtual array interface. More...
virtual void	SetPoint (int i, const Point3 &p)
	The points of a deformable object are accessed through a virtual array interface. More...
virtual BOOL	IsPointSelected (int i)
	Returns TRUE if the 'i-th' point is selected; otherwise FALSE. More...
virtual float	PointSelection (int i)
	Returns a floating point weighted point selection if the object supports it. More...
virtual BOOL	HasWeights ()
	Returns TRUE if the object has weights for its points that can be set; otherwise FALSE. More...
virtual double	GetWeight (int i)
	Returns the weight of the specified point of the object. More...
virtual void	SetWeight (int i, const double w)
	Sets the weight of the specified point. More...
virtual BOOL	PolygonCount (TimeValue t, int &numFaces, int &numVerts)
	Retreives the number of faces and vertices of the polyginal mesh representation of this object. More...
virtual void	PointsWereChanged ()
	Informs the object that its points have been deformed, so it can invalidate its cache. More...
virtual CoreExport void	Deform (Deformer *defProc, int useSel=0)
	This is the method used to deform the object with a deformer. More...
virtual CoreExport void	GetDeformBBox (TimeValue t, Box3 &box, Matrix3 *tm=NULL, BOOL useSel=FALSE)
	This method computes the bounding box in the objects local coordinates or the optional space defined by tm. More...
virtual int	IsMappable ()
	This method lets you know if the ApplyUVWMap() method is available for this object. More...
virtual int	NumMapChannels ()
	Returns the maximum number of channels supported by this type of object. More...
virtual int	NumMapsUsed ()
	Returns the number of maps currently used by this object. More...
virtual void	ApplyUVWMap (int type, float utile, float vtile, float wtile, int uflip, int vflip, int wflip, int cap, const Matrix3 &tm, int channel=1)
	This method may be called to map the object with UVW mapping coordinates. More...
virtual CoreExport int	CanConvertToType (Class_ID obtype)
	Indicates whether the object can be converted to the specified type. More...
virtual CoreExport Object *	ConvertToType (TimeValue t, Class_ID obtype)
	This method converts this object to the type specified and returns a pointer it. More...
virtual Class_ID	PreferredCollapseType ()
	This method allows objects to specify the class that is the best class to convert to when the user collapses the stack. More...
virtual CoreExport void	GetCollapseTypes (Tab< Class_ID > &clist, Tab< MSTR * > &nlist)
	When the user clicks on the Edit Stack button in the modify branch a list of 'Convert To:' types is presented. More...
virtual Object *	CollapseObject ()
	This method is called on the world space cache object when the stack gets collapsed, that lets the pipeline object decide, if it wants to return a different object than itself. More...
virtual DWORD	GetSubselState ()
	For objects that have sub selection levels, this method returns the current selection level of the object. More...
virtual void	SetSubSelState (DWORD s)
CoreExport void	ReadyChannelsForMod (ChannelMask channels)
	Implemented by the System. More...
virtual CoreExport Interval	ChannelValidity (TimeValue t, int nchan)
	Retrieve the current validity interval for the nchan channel of the object. More...
virtual CoreExport void	SetChannelValidity (int nchan, Interval v)
	Sets the validity interval of the specified channel. More...
virtual CoreExport void	InvalidateChannels (ChannelMask channels)
	This method invalidates the intervals for the given channel mask. More...
virtual CoreExport Interval	ObjectValidity (TimeValue t)
	This method returns the validity interval of the object as a whole at the specified time. More...
virtual Object *	MakeShallowCopy (ChannelMask channels)
	This method must make a copy of its "shell" and then shallow copy (see below) only the specified channels. More...
virtual CoreExport void	ShallowCopy (Object *fromOb, ChannelMask channels)
	This method copies the specified channels from the fromOb to this and copies the validity intervals. More...
virtual CoreExport void	FreeChannels (ChannelMask channels)
	This method deletes the memory associated with the specified channels and set the intervals associated with the channels to invalid (empty). More...
virtual CoreExport void	NewAndCopyChannels (ChannelMask channels)
	This method replaces the locked channels with newly allocated copies. More...
virtual CoreExport void	MaybeEnlargeViewportRect (GraphicsWindow *gw, Rect &rect)
	This method allows the object to enlarge its viewport rectangle, if it wants to. More...
CoreExport bool	IsBaseClassOwnedChannel (int nchan)
CoreExport void	UpdateValidity (int nchan, Interval v)
	When a modifier is applied to an object, it needs to include its own validity interval in the interval of the object. More...
Interval	GetNoEvalInterval ()
void	SetNoEvalInterval (Interval iv)
virtual CoreExport void	ReduceCaches (TimeValue t)
	This method give the object the chance to reduce its caches. More...
virtual int	IsConstObject ()
	This is called to determine if this is a construction object or not. More...
virtual int	NumPipeBranches (bool selected=true)
	This method returns the number of pipeline branches combined by the object. More...
virtual Object *	GetPipeBranch (int i, bool selected=true)
	Retrieves sub-object branches from an object that supports branching. More...
virtual INode *	GetBranchINode (TimeValue t, INode *node, int i, bool selected=true)
	When an object has sub-object branches, it is likely that the sub-objects are transformed relative to the object. More...
virtual int	NumberOfContainedShapes ()
	Returns the number of shapes contained inside this object. More...
virtual ShapeObject *	GetContainedShape (TimeValue t, int index)
	This method returns the ShapeObject specified by the index passed at the time specified. More...
virtual void	GetContainedShapeMatrix (TimeValue t, int index, Matrix3 &mat)
	Returns the matrix associated with the shape whose index is passed. More...
virtual BitArray	ContainedShapeSelectionArray ()
	This is used by the lofter. More...
virtual BOOL	IsShapeObject ()
virtual BOOL	CheckObjectIntegrity ()
	This method is used for debugging only. More...
virtual BOOL	HasUVW ()
	Call this method to find out if the object has UVW coordinates. More...
virtual BOOL	HasUVW (int mapChannel)
	Call this method to find out if the object is has UVW coordinates for the specified mapping channel. More...
virtual Object *	FindBaseObject ()
	It is called to return a pointer to the base object (an object that is not a derived object). More...
virtual BOOL	IsParamSurface ()
	There are several methods used to access a parametric position on the surface of the object. More...
virtual int	NumSurfaces (TimeValue t)
	Returns the number of parametric surfaces within the object. More...
virtual Point3	GetSurfacePoint (TimeValue t, float u, float v, Interval &iv)
	This method needs to be implemented if Object::IsParamSurface() returns TRUE. More...
virtual Point3	GetSurfacePoint (TimeValue t, int surface, float u, float v, Interval &iv)
	This method is used to retrieve a point on the specified surface of the object based on two parameters of the surface, u and v. More...
virtual void	SurfaceClosed (TimeValue t, int surface, BOOL &uClosed, BOOL &vClosed)
	This method allows the object to return flags that indicate whether the parametric surface is closed in the U and V dimensions. More...
virtual BOOL	GetExtendedProperties (TimeValue t, MSTR &prop1Label, MSTR &prop1Data, MSTR &prop2Label, MSTR &prop2Data)
	This method allows an object to return extended Properties fields. More...
CoreExport SvGraphNodeReference	SvTraverseAnimGraph (IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
CoreExport bool	SvHandleDoubleClick (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport MSTR	SvGetName (IGraphObjectManager *gom, IGraphNode *gNode, bool isBeingEdited)
CoreExport COLORREF	SvHighlightColor (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport bool	SvIsSelected (IGraphObjectManager *gom, IGraphNode *gNode)
	Returns true if the object is selected in its schematic view. More...
CoreExport MultiSelectCallback *	SvGetMultiSelectCallback (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport bool	SvCanSelect (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport void	AddXTCObject (XTCObject *pObj, int priority=0, int branchID=-1)
	This method adds an extension object into the pipeline. More...
CoreExport int	NumXTCObjects ()
	Returns the number of extension objects maintained by this Object. More...
CoreExport XTCObject *	GetXTCObject (int index)
	Returns a pointer to the specified extension object. More...
CoreExport void	RemoveXTCObject (int index)
	Removes the extension object as indicated by the index. More...
CoreExport void	SetXTCObjectPriority (int index, int priority)
	Sets the priority for the extension object whose index is passed. More...
CoreExport int	GetXTCObjectPriority (int index)
	Returns the integer priority number of the extension object whose index is passed. More...
CoreExport void	SetXTCObjectBranchID (int index, int branchID)
	Sets the branch ID of the extension object whose index is passed. More...
CoreExport int	GetXTCObjectBranchID (int index)
	Returns the integer branch ID of the extension object whose index is passed. More...
CoreExport void	MergeAdditionalChannels (Object *from, int branchID)
	This method has to be called whenever the CompoundObject updates a branch (calling Eval() on it). More...
CoreExport void	BranchDeleted (int branchID, bool reorderChannels)
	This method has to be called on the CompoundObject so it can delete the XTCObjects for the specified branch. More...
CoreExport void	CopyAdditionalChannels (Object *from, bool deleteOld=true, bool bShallowCopy=false)
	This method copies all extension objects from the "from" object into the current object. More...
CoreExport void	DeleteAllAdditionalChannels ()
	Implemented by the System. More...
virtual BOOL	UseSelectionBrackets ()
	This method allows an object to choose whether or not it will display selection brackets in shaded viewports. More...
virtual BOOL	IsManipulator ()
CoreExport void *	GetInterface (ULONG id)
	Inherited from Animatable. More...
virtual void	ReduceDisplayCaches ()
	Should reduce any derived display data to save memory, since the node wont be drawn until the user undhides it. More...
virtual bool	NeedGWCacheRebuilt (GraphicsWindow *gw, Material *ma, int numMat)
	This returns whether the Graphics Cache for this object needs to be rebuilt. More...
virtual void	BuildGWCache (GraphicsWindow *gw, Material *ma, int numMat, BOOL threaded)
	This builds the graphics window cached mesh. More...
Public Member Functions inherited from BaseObject
virtual CoreExport unsigned long	GetObjectDisplayRequirement () const
virtual CoreExport bool	PrepareDisplay (const MaxSDK::Graphics::UpdateDisplayContext &prepareDisplayContext)
virtual CoreExport bool	UpdatePerNodeItems (const MaxSDK::Graphics::UpdateDisplayContext &updateDisplayContext, MaxSDK::Graphics::UpdateNodeContext &nodeContext, MaxSDK::Graphics::IRenderItemContainer &targetRenderItemContainer)
virtual CoreExport bool	UpdatePerViewItems (const MaxSDK::Graphics::UpdateDisplayContext &updateDisplayContext, MaxSDK::Graphics::UpdateNodeContext &nodeContext, MaxSDK::Graphics::UpdateViewContext &viewContext, MaxSDK::Graphics::IRenderItemContainer &targetRenderItemContainer)
virtual CoreExport const MaxSDK::Graphics::RenderItemHandleArray &	GetRenderItems () const
CoreExport	BaseObject ()
virtual CoreExport	~BaseObject ()
virtual BOOL	HasViewDependentBoundingBox ()
	This method return true if GetWorldBoundBox returns different boxes for different viewports. More...
virtual int	HitTest (TimeValue t, INode *inode, int type, int crossing, int flags, IPoint2 *p, ViewExp *vpt)
	This method is called to determine if the specified screen point intersects the item. More...
virtual void	SetExtendedDisplay (int flags)
	This method is used for storing mode-dependent display attributes. More...
virtual int	Display (TimeValue t, INode *inode, ViewExp *vpt, int flags)
	This is called by the system to have the item display itself (perform a quick render in viewport, using the current TM). More...
virtual void	Snap (TimeValue t, INode *inode, SnapInfo *snap, IPoint2 *p, ViewExp *vpt)
	Checks the point passed for a snap and updates the SnapInfo structure. More...
virtual void	GetWorldBoundBox (TimeValue t, INode *inode, ViewExp *vp, Box3 &box)
	This method returns the world space bounding box for Objects (see below for the Sub-object gizmo or Modifiers gizmo version). More...
virtual void	GetLocalBoundBox (TimeValue t, INode *inode, ViewExp *vp, Box3 &box)
	This is the object space bounding box, the box in the object's local coordinates. More...
virtual BOOL	ChangeTopology ()
	This method asks the question of an object or modifier "Do you change topology"? An object or modifier returns TRUE if it is capable of changing topology when its parameters are being edited; otherwise FALSE. More...
virtual void	ForceNotify (Interval &i)
	Notifies dependents of a change. More...
virtual IParamArray *	GetParamBlock ()
	An object or modifier should implement this method if it wishes to make its parameter block available for other plug-ins to access it. More...
virtual int	GetParamBlockIndex (int id)
	If a plug-in makes its parameter block available (using GetParamBlock()) then it will need to provide #defines for indices into the parameter block. More...
virtual void	Move (TimeValue t, Matrix3 &partm, Matrix3 &tmAxis, Point3 &val, BOOL localOrigin=FALSE)
	When this method is called the plug-in should respond by moving its selected sub-object components. More...
virtual void	Rotate (TimeValue t, Matrix3 &partm, Matrix3 &tmAxis, Quat &val, BOOL localOrigin=FALSE)
	When this method is called the plug-in should respond by rotating its selected sub-object components. More...
virtual void	Scale (TimeValue t, Matrix3 &partm, Matrix3 &tmAxis, Point3 &val, BOOL localOrigin=FALSE)
	When this method is called the plug-in should respond by scaling its selected sub-object components. More...
virtual void	TransformStart (TimeValue t)
	This method is called before the first Move(), Rotate() or Scale() call and before a hold is in effect. More...
virtual void	TransformHoldingStart (TimeValue t)
	This method is called before the first Move(), Rotate() or Scale() call and after a hold is in effect. More...
virtual void	TransformHoldingFinish (TimeValue t)
	This method is called after the user has completed the Move(), Rotate() or Scale() operation and before the undo object has been accepted. More...
virtual void	TransformFinish (TimeValue t)
	This method is called after the user has completed the Move(), Rotate() or Scale() operation and the undo object has been accepted. More...
virtual void	TransformCancel (TimeValue t)
	This method is called when the transform operation is canceled by a right-click and the undo has been canceled. More...
virtual int	HitTest (TimeValue t, INode *inode, int type, int crossing, int flags, IPoint2 *p, ViewExp *vpt, ModContext *mc)
	This method is used in modifier gizmo hit testing. More...
virtual int	Display (TimeValue t, INode *inode, ViewExp *vpt, int flags, ModContext *mc)
	When this method is called the plug-in should respond by performing a quick render of the modifier gizmo in viewport using the current TM. More...
virtual void	GetWorldBoundBox (TimeValue t, INode *inode, ViewExp *vpt, Box3 &box, ModContext *mc)
	This method computes the world space bounding box of the modifier gizmo (or any object that when in sub-object mode has a gizmo). More...
virtual void	CloneSelSubComponents (TimeValue t)
	This method is called to make a copy of the selected sub-object components of the item. More...
virtual void	AcceptCloneSelSubComponents (TimeValue t)
	This method is called when the user mouses up after shift-cloning a sub-object selection. More...
virtual void	SelectSubComponent (HitRecord *hitRec, BOOL selected, BOOL all, BOOL invert=FALSE)
	This method is called to change the selection state of the component identified by hitRec. More...
virtual void	ClearSelection (int selLevel)
	This method is called to clear the selection for the given sub-object level. More...
virtual void	SelectAll (int selLevel)
	This method is called to select every element of the given sub-object level. More...
virtual void	InvertSelection (int selLevel)
	This method is called to invert the specified sub-object level. More...
virtual int	SubObjectIndex (HitRecord *hitRec)
	Returns the index of the sub-object element identified by the HitRecord hitRec. More...
virtual void	ActivateSubobjSel (int level, XFormModes &modes)
	When the user changes the selection of the sub-object drop down, this method is called to notify the plug-in. More...
virtual BOOL	SupportsNamedSubSels ()
	An object that supports sub-object selection can choose to support named sub object selection sets. More...
virtual void	ActivateSubSelSet (MSTR &setName)
	When the user chooses a name from the drop down list this method is called. More...
virtual void	NewSetFromCurSel (MSTR &setName)
	If the user types a new name into the named selection set drop down then this method is called. More...
virtual void	RemoveSubSelSet (MSTR &setName)
	If the user selects a set from the drop down and then chooses Remove Named Selections from the Edit menu this method is called. More...
virtual void	SetupNamedSelDropDown ()
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
virtual int	NumNamedSelSets ()
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
virtual MSTR	GetNamedSelSetName (int i)
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
virtual void	SetNamedSelSetName (int i, MSTR &newName)
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
virtual void	NewSetByOperator (MSTR &newName, Tab< int > &sets, int op)
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
virtual void	GetSubObjectCenters (SubObjAxisCallback *cb, TimeValue t, INode *node, ModContext *mc)
	When the user is in a sub-object selection level, the system needs to get the reference coordinate system definition from the current modifier being edited so that it can display the axis. More...
virtual void	GetSubObjectTMs (SubObjAxisCallback *cb, TimeValue t, INode *node, ModContext *mc)
	When the user is in a sub-object selection level, the system needs to get the reference coordinate system definition from the current modifier being edited so that it can display the axis. More...
virtual void	NotifyPreCollapse (INode *node, IDerivedObject *derObj, int index)
	This method is called before a modifier or object is collapsed. More...
virtual void	NotifyPostCollapse (INode *node, Object *obj, IDerivedObject *derObj, int index)
	This method is called after a modifier or object is collapsed. More...
virtual int	NumSubObjTypes ()
	Objects and modifiers that support subobjects have to overwrite this method - as well as GetSubObjType() - and return a class derived from ISubObjType in GetSubObjType(). More...
virtual ISubObjType *	GetSubObjType (int i)
	Returns a pointer to the sub-object type for the sub-object whose index is passed. More...
virtual CoreExport int	GetSubObjectLevel ()
	This method returns an integer which indicates the current sub-object level of the modifier or base object. More...
virtual void	SetGenUVW (BOOL sw)
	This method is called to change the state of its Generate UVW boolean. More...
virtual void	SetGenUVW (int mapChannel, BOOL sw)
	This method is called to change the state of its Generate UVW boolean for the specified mapping channel. More...
virtual void	ShowEndResultChanged (BOOL showEndResult)
	This method notifies the BaseObject that the end result display has been switched (the "Show End Result" button has been toggled). More...
Public Member Functions inherited from ReferenceTarget
virtual BOOL	IsRefTarget ()
	Checks if this is a ReferenceTarget. More...
CoreExport RefResult	TestForLoop (const Interval &refInterval, RefMakerHandle hmaker)
	Tests for a cyclical reference. More...
CoreExport BOOL	HasDependents ()
	Checks if a ReferenceTarget has references. More...
CoreExport BOOL	HasRealDependents ()
	Checks if this has Real (Strong) Dependents. More...
void	BeginDependencyTest ()
	Starts Dependency Test. More...
BOOL	EndDependencyTest ()
	Ends Dependency Test. More...
virtual void	RefAdded (RefMakerHandle rm)
	Called after a reference is made to a target. More...
virtual void	RefAddedUndoRedo (RefMakerHandle rm)
	Called after a reference is made to a target because of undo or redo. More...
virtual void	RefDeleted ()
	Called after a references to this is deleted. More...
virtual void	RefDeletedUndoRedo ()
	Called after a references to this is deleted because of undo or redo. More...
CoreExport RefResult	DeleteAllRefsToMe ()
	Deletes all references to this ReferenceTarget. More...
CoreExport RefResult	TransferReferences (RefTargetHandle oldTarget, BOOL delOld=FALSE)
	Transfers all the references from oldTarget to this. More...
CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...
virtual CoreExport void	BaseClone (ReferenceTarget *from, ReferenceTarget *to, RemapDir &remap)
	This method copies base class data from an object to its clone. More...
virtual CoreExport RefResult	NotifyDependents (const Interval &changeInt, PartID partID, RefMessage message, SClass_ID sclass=NOTIFY_ALL, BOOL propagate=TRUE, RefTargetHandle hTarg=NULL, NotifyDependentsOption notifyDependentsOption=REFNOTIFY_ALLOW_OPTIMIZATIONS)
	Notify all dependent RefMakers concerned with the message. More...
void	FlagDependents (TimeValue t, PartID which=PART_PUT_IN_FG)
	This sends the REFMSG_FLAGDEPENDENTS message up the pipeline. More...
virtual void	NotifyForeground (TimeValue t)
	This method is called to flag dependents into the FG. More...
CoreExport	ReferenceTarget ()
	Constructor. More...
virtual CoreExport RefResult	AutoDelete ()
	Deletes the object when it has no more real dependents. More...
CoreExport RefResult	MaybeAutoDelete ()
	Deletes the object when it has no more real dependents. More...
Public Member Functions inherited from ReferenceMaker
CoreExport RefResult	ReplaceReference (int which, RefTargetHandle newtarg, BOOL delOld=TRUE)
	Used when cloning reference makers. More...
CoreExport RefResult	DeleteAllRefsFromMe ()
	Deletes all references from this ReferenceMaker. More...
CoreExport RefResult	DeleteAllRefs ()
	Deletes all references both to and from this item. More...
CoreExport RefResult	DeleteReference (int i)
	Deletes the specified reference. More...
virtual BOOL	CanTransferReference (int i)
	Tells whether this reference can be transfered. More...
CoreExport ReferenceSaveManager &	GetReferenceSaveManager ()
	Access the ReferenceSaveManager of this ReferenceMaker. More...
virtual CoreExport void	RescaleWorldUnits (float f)
	Rescale size of all world units in reference hierarchy. More...
virtual CoreExport void	EnumAuxFiles (AssetEnumCallback &assetEnum, DWORD flags)
	Enumerate auxiliary files (e.g. bitmaps) More...
virtual CoreExport void	SaveEnum (SaveEnumProc &sep, BOOL isNodeCall=0)
	The default save enumeration. More...
virtual CoreExport bool	SpecifySaveReferences (ReferenceSaveManager &referenceSaveManager)
	Used to specify reference slot remapping during scene file save. More...
CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...
CoreExport bool	EnumRefHierarchy (RefEnumProc &proc, bool includeCustAttribs=true, bool includeIndirectRefs=true, bool includeNonPersistentRefs=true, bool preventDuplicatesViaFlag=true)
	This method provides a general purpose reference enumerator. More...
CoreExport int	FindRef (RefTargetHandle rtarg)
	Get the index of the ReferenceTarget. More...
virtual BOOL	IsRefMaker ()
	Tells whether it is a ReferenceMaker. More...
virtual BOOL	IsRealDependency (ReferenceTarget *rtarg)
	Returns whether this is a "real" (strong) dependency or not. More...
virtual BOOL	ShouldPersistWeakRef (RefTargetHandle rtarg)
	Specifies whether a weak reference is to be persisted on a partial load or save. More...
CoreExport	ReferenceMaker ()
	Constructor. More...
CoreExport void	DeleteMe ()
	Deletes an instance of this class. More...
Public Member Functions inherited from Animatable
virtual int	NumChildren ()
virtual Animatable *	ChildAnim (int i)
virtual CoreExport MSTR	NodeName ()
virtual void	EditTrack ()
virtual CoreExport BOOL	SubAnimSetKeyBufferPresent (int subNum)
	returns true if the sub-anim has a "Set Key" buffer present More...
virtual BOOL	SetKeyBufferPresent ()
	returns true if there is a "Set Key" buffer present More...
virtual CoreExport void	SubAnimCommitSetKeyBuffer (TimeValue t, int subNum)
	Commit any "Set Key" buffers on the given sub-anim. More...
virtual void	CommitSetKeyBuffer (TimeValue t)
	Commit any "Set Key" buffers. More...
virtual CoreExport void	SubAnimRevertSetKeyBuffer (int subNum)
	Revert any "Set Key" buffers on the given sub-anim. More...
virtual void	RevertSetKeyBuffer ()
	Revert any "Set Key" buffers. More...
virtual LRESULT CALLBACK	TrackViewWinProc (HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam)
	This function is obsolete. More...
virtual bool	IsParamBlockDesc2Used (ParamBlockDesc2 *desc)
	Returns true if the passed description is being used. More...
virtual bool	GetMacroRecorderName (bool used_as_rhs_value, MSTR &objectSpecifiedName)
	This method is called to access the object specified name to use for the Maxscript macrorecorder. More...
CoreExport	Animatable ()
	Constructor. More...
MSTR	ClassName () const
	Returns the name of the plugin class. More...
virtual CoreExport void	ReleaseInterface (ULONG id, void *i)
virtual CoreExport int	SetProperty (ULONG id, void *data)
virtual CoreExport void *	GetProperty (ULONG id)
CoreExport void	AppendProperty (AnimProperty *prop)
	A function to directly add arbitrary properties to this object developers should ensure that the properties ID does not conflict with any Max-specific IDs. More...
CoreExport AnimProperty *	FindProperty (DWORD id)
	Find any property. More...
CoreExport void	AddAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid, DWORD len, void *data)
	Adds application/plugin specific (custom) data to an Animatable. More...
CoreExport AppDataChunk *	GetAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Retrieves the application/plugin specific (custom) data stored with an Animatable. More...
CoreExport BOOL	RemoveAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Deletes the application/plugin specific (custom) data stored with an Animatable. More...
CoreExport void	ClearAllAppData ()
	Deletes all application/plugin specific (custom) data stored with an Animatable. More...
virtual void	DeleteSubAnim (int i)
virtual DWORD	GetSubAnimCurveColor (int subNum)
CoreExport int	HasSubElements (int type=0)
virtual int	GetSubFCurveExtents (int subNum, ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	The values max and min should be initialized before calling this function. More...
virtual BOOL	BypassTreeView ()
virtual BOOL	BypassTrackBar ()
virtual BOOL	BypassPropertyLevel ()
virtual BOOL	InvisibleProperty ()
virtual int	NumKeys ()
virtual TimeValue	GetKeyTime (int index)
virtual int	GetKeyIndex (TimeValue t)
virtual BOOL	GetNextKeyTime (TimeValue t, DWORD flags, TimeValue &nt)
virtual void	CopyKeysFromTime (TimeValue src, TimeValue dst, DWORD flags)
virtual void	DeleteKeyAtTime (TimeValue t)
virtual BOOL	IsKeyAtTime (TimeValue t, DWORD flags)
virtual int	GetKeyTimes (Tab< TimeValue > &times, Interval range, DWORD flags)
virtual int	GetKeySelState (BitArray &sel, Interval range, DWORD flags)
CoreExport void	OpenTreeEntry (int type, DWORD tv)
CoreExport void	CloseTreeEntry (int type, DWORD tv)
CoreExport int	IsTreeEntryOpen (int type, DWORD tv)
CoreExport BOOL	GetSelInTrackView (DWORD tv)
CoreExport void	SetSelInTrackView (DWORD tv, BOOL sel)
CoreExport BOOL	InTrackViewSelSet (int which)
CoreExport void	SetTrackViewSelSet (int which, BOOL inOut)
virtual BOOL	AssignController (Animatable *control, int subAnim)
virtual BOOL	CanAssignController (int subAnim)
	Return true if we can reassign the subanim specified. More...
virtual BOOL	CanMakeUnique ()
CoreExport int	EnumAnimTree (AnimEnum *animEnum, Animatable *client, int subNum)
virtual int	RenderBegin (TimeValue t, ULONG flags=0)
virtual int	RenderEnd (TimeValue t)
virtual CoreExport Interval	GetTimeRange (DWORD flags)
virtual void	EditTimeRange (Interval range, DWORD flags)
virtual void	DeleteTime (Interval iv, DWORD flags)
virtual void	ReverseTime (Interval iv, DWORD flags)
virtual void	ScaleTime (Interval iv, float s)
virtual void	InsertTime (TimeValue ins, TimeValue amount)
virtual BOOL	SupportTimeOperations ()
virtual CoreExport void	MapKeys (TimeMap *map, DWORD flags)
virtual void	DeleteKeys (DWORD flags)
virtual void	DeleteKeyByIndex (int index)
virtual void	SelectKeys (TrackHitTab &sel, DWORD flags)
virtual void	SelectSubKeys (int subNum, TrackHitTab &sel, DWORD flags)
virtual void	SelectSubCurve (int subNum, BOOL sel)
virtual void	SelectKeyByIndex (int i, BOOL sel)
virtual BOOL	IsKeySelected (int i)
virtual void	FlagKey (TrackHitRecord hit)
virtual int	GetFlagKeyIndex ()
virtual int	NumSelKeys ()
virtual void	CloneSelectedKeys (BOOL offset=FALSE)
virtual void	AddNewKey (TimeValue t, DWORD flags)
virtual void	MoveKeys (ParamDimensionBase *dim, float delta, DWORD flags)
virtual void	ScaleKeyValues (ParamDimensionBase *dim, float origin, float scale, DWORD flags)
virtual void	SelectCurve (BOOL sel)
virtual BOOL	IsCurveSelected ()
	Returns TRUE if the function curve is selected; otherwise returns FALSE. More...
virtual BOOL	IsSubCurveSelected (int subNum)
	Returns the selected state of the sub-curve whose index is passed. More...
virtual int	GetSelKeyCoords (TimeValue &t, float &val, DWORD flags)
virtual void	SetSelKeyCoords (TimeValue t, float val, DWORD flags)
virtual int	SetSelKeyCoordsExpr (ParamDimension *dim, const MCHAR *timeExpr, const MCHAR *valExpr, DWORD flags)
virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, int dx, int dy, DWORD flags)
virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, float angle, float length, DWORD flags)
virtual BOOL	CanCopyTrack (Interval iv, DWORD flags)
virtual BOOL	CanPasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)
virtual TrackClipObject *	CopyTrack (Interval iv, DWORD flags)
virtual void	PasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)
virtual BOOL	CanCopySubTrack (int subNum, Interval iv, DWORD flags)
virtual BOOL	CanPasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)
virtual TrackClipObject *	CopySubTrack (int subNum, Interval iv, DWORD flags)
virtual void	PasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)
virtual int	GetTrackVSpace (int lineHeight)
virtual int	HitTestTrack (TrackHitTab &hits, Rect &rcHit, Rect &rcTrack, float zoom, int scroll, DWORD flags)
virtual int	PaintTrack (ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)
virtual int	PaintSubTrack (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)
virtual int	PaintFCurves (ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	HitTestFCurves (ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	PaintSubFCurves (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	HitTestSubFCurves (int subNum, ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual void	EditTrackParams (TimeValue t, ParamDimensionBase *dim, const MCHAR *pname, HWND hParent, IObjParam *ip, DWORD flags)
virtual int	TrackParamsType ()
virtual int	GetFCurveExtents (ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	This method is called to calculate the largest and smallest values of the anim. More...
CoreExport void	AddNoteTrack (NoteTrack *note)
CoreExport void	DeleteNoteTrack (NoteTrack *note, BOOL delNote=TRUE)
CoreExport BOOL	HasNoteTracks ()
CoreExport int	NumNoteTracks ()
CoreExport NoteTrack *	GetNoteTrack (int i)
virtual void	FreeAllBitmaps ()
virtual void	GetSystemNodes (INodeTab &nodes, SysNodeContext Context)
virtual BOOL	IsSubClassOf (Class_ID classID)
	returns true if the animatable has sub-classed off the given class More...
virtual CoreExport void	MouseCycleCompleted (TimeValue t)
virtual CoreExport void	MouseCycleStarted (TimeValue t)
CoreExport bool	SvSaveData (ISave *isave, USHORT id)
CoreExport bool	SvLoadData (ILoad *iLoad)
CoreExport DWORD	SvGetRefIndex ()
CoreExport void	SvSetRefIndex (DWORD i)
CoreExport bool	SvDeleteRefIndex ()
CoreExport SvGraphNodeReference	SvStdTraverseAnimGraph (IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
virtual CoreExport bool	SvCanInitiateLink (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvCanConcludeLink (IGraphObjectManager *gom, IGraphNode *gNode, IGraphNode *gNodeChild)
virtual CoreExport bool	SvCanSetName (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvSetName (IGraphObjectManager *gom, IGraphNode *gNode, const MSTR &name)
virtual CoreExport bool	SvCanRemoveThis (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvRemoveThis (IGraphObjectManager *gom, IGraphNode *gNode)
	Called when the user deletes this object in the schematic view... More...
virtual CoreExport bool	SvIsHighlighted (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport COLORREF	SvGetSwatchColor (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvIsInactive (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvLinkChild (IGraphObjectManager *gom, IGraphNode *gNodeThis, IGraphNode *gNodeChild)
virtual CoreExport bool	SvEditProperties (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetTip (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetRefTip (IGraphObjectManager *gom, IGraphNode *gNode, IGraphNode *gNodeMaker)
virtual CoreExport bool	SvCanDetach (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvDetach (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetRelTip (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns a string to be displayed in the tip window in the schematic view for a relationship from "gNodeMaker" to "gNodeTarget"... More...
virtual CoreExport bool	SvCanDetachRel (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns true if this object can respond to the SvDetachRel(...) method... More...
virtual CoreExport bool	SvDetachRel (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Detach this relationship. More...
virtual CoreExport bool	SvHandleRelDoubleClick (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Called when this relationship is double-clicked in the schematic view... More...
CoreExport ICustAttribContainer *	GetCustAttribContainer ()
	This method returns a pointer to the custom attributes container interface class. More...
CoreExport void	AllocCustAttribContainer ()
	This method allocates space for a custom attributes container. More...
CoreExport void	DeleteCustAttribContainer ()
	This method deletes space used by a custom attributes container. More...
void	SetAFlag (DWORD mask)
void	ClearAFlag (DWORD mask)
	Clears one or more bits in the Animatable flags. More...
bool	TestAFlag (DWORD mask) const
	Tests one or more bits in the Animatable flags. More...
void	SetAFlagEx (DWORD mask)
	Sets one or more bits in the Animatable extended flags. More...
void	ClearAFlagEx (DWORD mask)
	Clears one or more bits in the Animatable extended flags. More...
bool	TestAFlagEx (DWORD mask) const
	Tests one or more bits in the Animatable extended flags. More...
CoreExport bool	TestFlagBit (int index)
	Tests the specified flag bit. More...
CoreExport void	SetFlagBit (int index, bool newValue=true)
	Sets the specified flag bit. More...
CoreExport void	ClearFlagBit (int index)
	Clears the specified flag bit. More...
Public Member Functions inherited from InterfaceServer
virtual UtilExport	~InterfaceServer ()
	Destructor. More...
Public Member Functions inherited from IPFAction
	FN_5 (kInit, TYPE_bool, Init, TYPE_IOBJECT, TYPE_OBJECT, TYPE_INODE, TYPE_OBJECT_TAB_BR, TYPE_INODE_TAB_BR)
	FN_1 (kRelease, TYPE_bool, Release, TYPE_IOBJECT)
	VFN_2 (kChannelsUsed, ChannelsUsed, TYPE_INTERVAL_BR, TYPE_FPVALUE)
	FN_0 (kActivityInterval, TYPE_INTERVAL_BV, ActivityInterval)
	FN_0 (kIsFertile, TYPE_bool, IsFertile)
	FN_0 (kIsNonExecutable, TYPE_bool, IsNonExecutable)
	FN_0 (kSupportRand, TYPE_bool, SupportRand)
	FN_0 (kGetRand, TYPE_INT, GetRand)
	VFN_1 (kSetRand, SetRand, TYPE_INT)
	FN_0 (kNewRand, TYPE_INT, NewRand)
	FN_0 (kIsMaterialHolder, TYPE_bool, IsMaterialHolder)
	FN_0 (kGetMaterial, TYPE_MTL, GetMaterial)
	FN_1 (kSetMaterial, TYPE_bool, SetMaterial, TYPE_MTL)
	FN_0 (kSupportScriptWiring, TYPE_bool, SupportScriptWiring)
	FN_0 (kGetUseScriptWiring, TYPE_bool, GetUseScriptWiring)
	VFN_1 (kSetUseScriptWiring, SetUseScriptWiring, TYPE_bool)
PFExport void	ChannelsUsed (const Interval &time, FPValue *channels) const
	"Function publishing" alternative for ChannelsUsed method. More...
virtual bool	IsFertile () const
	Birth Action is a special type of actions since it can create particles from scratch. More...
virtual bool	IsNonExecutable () const
	There is a special case of non-executable actions. More...
virtual bool	Has3dIcon () const
	An action may have 3d icon representation in viewport. More...
virtual int	IsColorCoordinated () const
	If an operator/test has a 3D icon the icon can be automatically color matched to the color of the display operator in the same event. More...
PFExport int	NewRand ()
	For chaos/unpredictibility action, sets and returns new rand value. More...
virtual bool	IsMaterialHolder () const
	If the Action may potentically change particle material, then return true. More...
virtual Mtl *	GetMaterial ()
	Returns a material for particles. More...
virtual bool	SetMaterial (Mtl *mtl)
	Return true if material was set successfully. More...
virtual bool	SupportScriptWiring () const
	An Action may have parameters controlled by script channels. More...
virtual bool	GetUseScriptWiring () const
	Supports script wiring. More...
virtual void	SetUseScriptWiring (bool useScriptWiring)
	Supports script wiring. More...
virtual bool	IsEmitterTMDependent () const
	An Action may or may not be dependent on the particle system emitter. More...
virtual bool	IsEmitterPropDependent () const
	Checks the props category for dependency. More...
FPInterfaceDesc *	GetDesc ()
Public Member Functions inherited from FPMixinInterface
	FPMixinInterface ()
virtual LifetimeType	LifetimeControl ()
virtual CoreExport bool	RegisterNotifyCallback (InterfaceNotifyCallback *incb)
virtual void	UnRegisterNotifyCallback (InterfaceNotifyCallback *incb)
CoreExport	~FPMixinInterface ()
virtual FPInterfaceDesc *	GetDescByID (Interface_ID id)
virtual Interface_ID	GetID ()
Public Member Functions inherited from FPInterface
virtual CoreExport FPStatus	Invoke (FunctionID fid, TimeValue t=0, FPParams *params=NULL)
virtual FPStatus	Invoke (FunctionID fid, FPParams *params)
virtual CoreExport FPStatus	Invoke (FunctionID fid, TimeValue t, FPValue &result, FPParams *params=NULL)
virtual FPStatus	Invoke (FunctionID fid, FPValue &result, FPParams *params=NULL)
virtual CoreExport FunctionID	FindFn (const MCHAR *name)
virtual CoreExport BOOL	IsEnabled (FunctionID actionID)
virtual CoreExport BOOL	IsChecked (FunctionID actionID)
virtual CoreExport BOOL	IsVisible (FunctionID actionID)
virtual CoreExport FunctionID	GetIsEnabled (FunctionID actionID)
virtual CoreExport FunctionID	GetIsChecked (FunctionID actionID)
virtual CoreExport FunctionID	GetIsVisible (FunctionID actionID)
virtual ActionTable *	GetActionTable ()
virtual void	EnableActions (BOOL onOff)
Public Member Functions inherited from BaseInterface
virtual UtilExport	~BaseInterface ()
	Destructor. More...
virtual BaseInterface *	AcquireInterface ()
virtual void	ReleaseInterface ()
virtual void	DeleteInterface ()
virtual BaseInterface *	CloneInterface (void *remapDir=NULL)
Public Member Functions inherited from IPViewItem
	FN_0 (kNumPViewParamBlocks, TYPE_INT, NumPViewParamBlocks)
	FN_1 (kGetPViewParamBlock, TYPE_REFTARG, GetPViewParamBlock, TYPE_INDEX)
	FN_1 (kHasComments, TYPE_bool, HasComments, TYPE_INODE)
	FN_1 (kGetComments, TYPE_STRING, GetComments, TYPE_INODE)
	VFN_2 (kSetComments, SetComments, TYPE_INODE, TYPE_STRING)
	FN_2 (kGetWireExtension, TYPE_INT, GetWireExtension, TYPE_INODE, TYPE_INT)
	VFN_3 (kSetWireExtension, SetWireExtension, TYPE_INODE, TYPE_INT, TYPE_INT)
	IPViewItem ()
PFExport int	NumPViewParamMaps () const
PFExport IParamMap2 *	GetPViewParamMap (int i) const
PFExport void	AddPViewParamMap (IParamMap2 *map)
PFExport void	RemovePViewParamMap (IParamMap2 *map)
virtual bool	HasCustomPViewIcons ()
	Implement if you want your operator/test to be shown with a custom icon in ParticleView. More...
virtual bool	HasTransparentPViewIcons () const
	Defines whether the custom icons in Particle View have alpha channels. More...
virtual HBITMAP	GetActivePViewIcon ()
	Implement if you want your operator/test to be shown with a custom icon in ParticleView. More...
virtual HBITMAP	GetInactivePViewIcon ()
	Implement if you want your operator/test to be shown with a custom icon in ParticleView. More...
virtual HBITMAP	GetTruePViewIcon ()
	Implement if you want your operator/test to be shown with a custom icon in ParticleView. More...
virtual HBITMAP	GetFalsePViewIcon ()
	Implement if you want your operator/test to be shown with a custom icon in ParticleView. More...
virtual bool	ShowColorSwatch () const
	An operator may have a color swatch UI (color circle on the right side) if it can be used to display particles in viewport. More...
PFExport int	GetNumInstances () const
	Used to track instanced actions. More...
PFExport void	SetNumInstances (int num)
	Used to track instanced actions. More...
PFExport void	IncNumInstances ()
	Used to track instanced actions. More...
PFExport bool	HasComments (INode *itemNode) const
	A PView item can have comments. More...
PFExport const MCHAR *	GetComments (INode *itemNode) const
	See HasComments(). More...
PFExport void	SetComments (INode *itemNode, const MCHAR *comments)
	See HasComments(). More...
PFExport void	EditComments (INode *itemNode, HWND parentWnd, long x, long y)
	See HasComments(). More...
PFExport LRESULT CALLBACK	commentsProc (HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam)
	For internal use. More...
virtual bool	HasDynamicName (MSTR &nameSuffix)
	For dynamic names support; if the action has a dynamic name then it supplies the name suffix. More...
FPInterfaceDesc *	GetDesc ()
Public Member Functions inherited from SlateModelWrapper
	SlateModelWrapper ()
	SlateModelWrapper (const SlateModelWrapper &slateModelWrapper)
virtual	~SlateModelWrapper ()
Slate::IModel *	GetModel ()
	Returns a pointer to the original wrapped slate model. More...
void	SetDirection (Direction direction)
	Sets the connection direction of the wrapped slate model. More...
void	NotifyListenersDisplayColorChanged ()
	Helpers for the public maxsdk sample class PFOperatorDisplay. More...
void	DefineColorSwatchUI ()
	Helpers for the public maxsdk sample class PFOperatorDisplay. More...
void	RefreshColorSwatchVisibility ()
	Helpers for the public maxsdk sample class PFOperatorDisplay. More...
void	RefMakerNotifyTarget (int message, ReferenceMaker *hMaker)
	Need to be called by NotifyTarget( int message, ReferenceMaker* hMaker ) in the object that derives from SlateModelWrapper. More...

Protected Member Functions
virtual PFExport void	SetReference (int i, RefTargetHandle rtarg)
	Stores a ReferenceTarget as its 'i-th' reference`. More...
Protected Member Functions inherited from ReferenceTarget
virtual CoreExport int	DoEnumDependentsImpl (DependentEnumProc *dep)
	Method to perform an enumeration on a ReferenceTarget. More...
virtual CoreExport	~ReferenceTarget ()=0
	Destructor. More...
Protected Member Functions inherited from ReferenceMaker
virtual CoreExport	~ReferenceMaker ()=0
	Destructor. More...
void	BlockEval ()
void	UnblockEval ()
int	Evaluating ()
CoreExport RefResult	StdNotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID partID, RefMessage message, BOOL propagate, NotifyDependentsOption notifyDependentsOption)
Protected Member Functions inherited from Animatable
virtual CoreExport	~Animatable ()=0
	Destructor. More...
Protected Member Functions inherited from Noncopyable
	Noncopyable ()
	~Noncopyable ()
Protected Member Functions inherited from FPMixinInterface
	FPMixinInterface (const FPMixinInterface &rhs)
FPMixinInterface &	operator= (const FPMixinInterface &rhs)
Protected Member Functions inherited from FPInterface
virtual FPStatus	_dispatch_fn (FunctionID fid, TimeValue t, FPValue &result, FPParams *p)

Protected Attributes
IParamBlock2 *	m_pblock
RandObjLinker	m_randLinker
Protected Attributes inherited from BaseObject
MaxSDK::Graphics::RenderItemHandleArray	mRenderItemHandles
Protected Attributes inherited from Animatable
DWORD	aflag
AnimPropertyList	aprops
Protected Attributes inherited from FPMixinInterface
Tab< InterfaceNotifyCallback * > *	interfaceNotifyCBs
Protected Attributes inherited from IPViewItem
Tab< IParamMap2 * >	m_paramMaps
int	m_numInstances
Tab< INode * >	m_nodes
Tab< HWND >	m_hWnds

Additional Inherited Members
Public Types inherited from IPFAction
enum	{   kInit, kRelease, kChannelsUsed, kActivityInterval,   kIsFertile, kIsNonExecutable, kSupportRand, kGetRand,   kSetRand, kNewRand, kIsMaterialHolder, kGetMaterial,   kSetMaterial, kSupportScriptWiring, kGetUseScriptWiring, kSetUseScriptWiring }
Public Types inherited from BaseInterface
enum	LifetimeType { noRelease, immediateRelease, wantsRelease, serverControlled }
Public Types inherited from IPViewItem
enum	{   kNumPViewParamBlocks, kGetPViewParamBlock, kHasComments, kGetComments,   kSetComments, kGetWireExtension, kSetWireExtension }
Public Types inherited from SlateModelWrapper
enum	Direction { Direction_None = 0x0, Direction_In = 0x1, Direction_Out = 0x2, Direction_Both = 0x3 }
Static Public Member Functions inherited from Animatable
static CoreExport BOOL	IsDeleted (Animatable *anim)
	Debug method to determine whether an object has been deleted. More...
static CoreExport AnimHandle	GetHandleByAnim (Animatable *anim)
	Get the unique handle for an Animatable object. More...
static CoreExport Animatable *	GetAnimByHandle (AnimHandle handle)
	Get an Animatable object from its unique handle. More...
static CoreExport void	EnumerateAllAnimatables (EnumAnimList &enumProcObject)
	Enumerator to enumerate across all animatables. More...
static CoreExport bool	RegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	UnRegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	RegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	UnRegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport int	RequestFlagBit ()
	Requests an unique flag bit index. More...
static CoreExport void	ReleaseFlagBit (int index)
	Releases the flag bit index. More...
static CoreExport void	ClearFlagBitInAllAnimatables (int index)
	Clears the specified flag bit in all Animatables. More...
Static Public Member Functions inherited from MaxHeapOperators
static UtilExport void *	operator new (size_t size)
	Standard new operator used to allocate objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e)
	Standard new operator used to allocate objects if there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate objects that takes the type of memory, filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate arrays of objects. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void	operator delete (void *ptr)
	Standard delete operator used to deallocate an object If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an object If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an object that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, void *placement_ptr)
	Placement new operator. More...
static UtilExport void	operator delete (void *ptr, void *placement_ptr)
	Placement delete operator. More...
Static Public Member Functions inherited from IPFAction
static PFExport int	NewRand (IParamBlock2 *pblock, ParamID randomSeedParamID)
	Alternative for PFExport int NewRand(); but not in FnPub interface. More...
Static Public Member Functions inherited from IPViewItem
static PFExport int	GetWireExtension (INode *node, int &wireHeight)
	To read/modify the length/height of the wire nub extended from an emitter, or an action list, or a test. More...
static PFExport void	SetWireExtension (INode *node, int wireLen, int wireHight)
	Sets wire length. More...
Static Public Attributes inherited from Animatable
static const AnimHandle	kInvalidAnimHandle = 0
Static Public Attributes inherited from FPInterface
static CoreExport FPInterfaceDesc	nullInterface
Static Public Attributes inherited from IPViewItem
static const DWORD	PViewItemCommentsChunk = 0x354b7085

Constructor & Destructor Documentation

PFExport PFSimpleAction

(

)

virtual PFExport ~PFSimpleAction ( )

virtual

Member Function Documentation

virtual PFExport BaseInterface* GetInterface ( Interface_ID  id )

virtual

Remarks

Returns a pointer to the interface whose ID is specified.

Parameters:

Interface_ID id

The ID of the interface to return.

Default Implementation:

{ return NULL; }

Reimplemented from FPMixinInterface.

Reimplemented in PFSimpleTest, and PFSimpleOperator.

virtual PFExport void DeleteThis ( )

virtual

Deletes an instance of this class.

3ds Max calls this method when it needs to delete a plugin object (an instance of a class derived from Animatable). Similarly, plugins that need to delete instances of an Animatable or a class directly derived from it via an Animatable pointer, should call this method instead of calling directly operator delete. Following these rules will ensure that the same memory manager is used to allocate and deallocate the object. The default implementation of this method deletes the object. Plugin instances that never need to be deleted from the heap can overwrite this method to do nothing.

Note

See the method ClassDesc::Create() for details on how Max allocates plugin objects.

See ReferenceMaker::DeleteMe() and ReferenceTarget::MaybeAutoDelete() for information on how plugin instances are deleted by the system.

Remarks

See Memory Management.

See also

Required DLL Functions, Class ClassDesc.

Reimplemented from Animatable.

virtual int NumSubs ( )

inlinevirtual

Remarks

The system uses a virtual array mechanism to access the sub-anims of a plug-in. This method returns the total number of sub-anims maintained by the plug-in. If a plug-in is using a parameter block to manage its parameters it should just return 1 for all the parameters directed by the parameter block.

Returns

The number of sub-anims used by the plug-in.

Default Implementation:

{ return 0; }

Reimplemented from Animatable.

{ return 1; } // the paramBlock

virtual PFExport Animatable* SubAnim ( int  i )

virtual

Remarks

This method returns a pointer to the 'i-th' sub-anim. If a plug-in is using a parameter block to manage all its parameters it should just return a pointer to the parameter block itself from this method. This method may return NULL so developers need to check the return value before calling other sub anim methods (such as SubAnimName()).

Parameters

i	This is the index of the sub-anim to return.

Default Implementation:

{ return NULL };

Reimplemented from Animatable.

virtual PFExport MSTR SubAnimName ( int  i )

virtual

Remarks

This method returns the name of the 'i-th' sub-anim to appear in track view. The system has no idea what name to assign to the sub-anim (it only knows it by the virtual array index), so this method is called to retrieve the name to display. Developer need to make sure the 'i-th' SubAnim() is non-NULL or this method will fail.

Parameters

i	The index of the parameter name to return

Returns

The name of the 'i-th' parameter.

Reimplemented from Animatable.

PFExport BOOL SelectSubAnim ( int  subNum )

virtual

Remarks

This method is available in release 2.0 and later only.

When a user is in Track View in Edit Keys mode and clicks on the green triangle of a controller then this method will be called on the client with the appropriate sub number that corresponds to it. For instance, the Editable Mesh object implements this to allow the user to select vertices that are animated from the Track View.

Parameters

subNum

The index of the sub-anim that was clicked on.

Returns

TRUE if implemented; otherwise FALSE. (Track View will call RedrawViewports() if something returns TRUE from this method).

Default Implementation:

{return FALSE;}

Reimplemented from Animatable.

virtual PFExport ParamDimension* GetParamDimension ( int  i )

virtual

Remarks

Returns the type of dimension of the 'i-th' sub-anim. A dimension describes the type and order of magnitude of a sub-anim.

Parameters

i	Specifies the sub-anim (parameter) to return the dimension of.

Returns

The dimension of the 'i-th' sub-anim (parameter).

Default Implementation:

{return defaultDim;}

Reimplemented from Animatable.

virtual PFExport int SubNumToRefNum ( int  subNum )

virtual

Remarks

This method is used for copying and pasting in the track view. It converts an anim index to a reference index or returns -1 if there is no correspondence. If a client does not wish an anim to be copied or pasted then it can return -1 even if there is a corresponding reference num.

Parameters

subNum

The anim index to return the corresponding reference index of.

Default Implementation:

{ return -1}

Returns

The reference index corresponding to the anim index passed. Return -1 if there is no correspondence.

Reimplemented from Animatable.

virtual BOOL CanCopyAnim ( )

inlinevirtual

Remarks

In addition to SubNumToRefNum(), if an anim doesn't want to be copied (via Track View or the Edit Modifier Stack 'Copy' button) it can return FALSE from this method, otherwise it can use the default implementation to return TRUE.

Default Implementation:

{return TRUE;}

Reimplemented from Animatable.

{ return FALSE; }

virtual PFExport int HasSubElements ( int  type )

virtual

virtual BOOL CanDeleteSubAnim ( int  i )

inlinevirtual

Remarks

Returns TRUE if the specified sub-anim controller can be deleted; otherwise FALSE.

A new "Delete Controller" button has been added to the Track View toolbar that is enabled when one or more delete-able tracks are selected. This method allows a plug-in to indicate to the Track View that one or more of its sub-controllers are delete-able. This provides a way to allow the user to delete node sub-controllers such as the visibility track, "Image Motion Blur Multiplier", "Object Motion Blur On/Off", etc. If the user selects one of the above-mentioned tracks in the Track View the "Delete Controller" button will become available.

Parameters

i	The zero based index of the sub-anim.

Default Implementation:

{return FALSE;}

Reimplemented from Animatable.

{ return FALSE; }

virtual BOOL IsAnimated ( )

inlinevirtual

Remarks

Returns TRUE if this animatable actually has animation; otherwise FALSE. This method is recursive, so for example, if you call node->IsAnimated() it will return TRUE if any aspect of the node is animated; otherwise it will return FALSE.

Default Implementation:

The default implementation returns TRUE if a child anim has animation.

Reimplemented from Animatable.

{ return _pblock()->IsAnimated(); }

virtual void FreeCaches ( )

inlinevirtual

Remarks

This is called to delete any item that can be rebuilt. For example, the procedural sphere object has a mesh that it caches. It could call Mesh::FreeAll() on the mesh from this method. This will free the vertex/face/uv arrays. If the sphere is ever evaluated again it can just rebuild the mesh. If an object (like a sphere) has modifiers applied to it, and those modifiers are not animated, then the result of the pipeline is cached in the node. So there is no reason for the sphere to also have a cache of its representation. Therefore when this method is called, the sphere can free the data of the mesh.

Default Implementation:

{}

Reimplemented from Animatable.

{ ; }

virtual int NumParamBlocks ( )

inlinevirtual

Remarks

This method is available in release 3.0 and later only.

This method returns the number of ParamBlock2s in this instance.

Default Implementation:

{ return 0; }

Reimplemented from Animatable.

{ return 1; } // the paramBlock

virtual PFExport IParamBlock2* GetParamBlock ( int  i )

virtual

Remarks

This method return 'i-th' ParamBlock2 in this instance (or NULL if not available).

Parameters

i	The zero based index of the ParamBlock2 to return.

Default Implementation:

{ return NULL; }

Reimplemented from Animatable.

virtual PFExport IParamBlock2* GetParamBlockByID ( short  id )

virtual

Remarks

This method returns a pointer to the ParamBlock2 as specified by the ID passed (or NULL if not available).

Parameters

id	The BlockID of the ParamBlock2 instance.

Default Implementation:

{ return NULL; }

Reimplemented from Animatable.

virtual int NumRefs ( )

inlinevirtual

Returns the total number of references this ReferenceMaker can hold.

The plugin implements this method to indicate the total number of of references it can make. This includes all references whether they are NULL (inactive) or non-NULL (active) at the time when this method is called. A plugin can hold a variable number of references, thus the return value of this method is not to be cached and reused by client code.

Returns

The total number of references this plugin can hold. The default implementation is return 0.

Reimplemented from ReferenceMaker.

{ return 1; }

virtual PFExport RefTargetHandle GetReference ( int  i )

virtual

Returns the 'i-th' reference.

The plugin implements this method to return its 'i-th' reference. The plug-in simply keeps track of its references using an integer index for each one. This method is normally called by the system.

Parameters

i	- The index of the reference to retrieve. Valid values are from 0 to NumRefs()-1.

Returns

The reference handle of the 'i-th' reference. Note that different calls to this method with the same 'i' value can result in different reference handles being retrieved, as the plugin changes the scene objects it references as its 'i-th' reference.

Reimplemented from ReferenceMaker.

virtual PFExport void SetReference ( int  i, RefTargetHandle  rtarg  )

protectedvirtual

Stores a ReferenceTarget as its 'i-th' reference`.

The plugin implements this method to store the reference handle passed to it as its 'i-th' reference. In its implementation of this method, the plugin should simply assign the reference handle passed in as a parameter to the member variable that holds the 'i-th' reference. Other reference handling methods such as ReferenceMaker::DeleteReference(), or ReferenceMaker::ReplaceReference() should not be called from within this method. The plugin itself or other plugins should not call this method directly. The system will call this method when a new reference is created or an existing one is replaced by calling ReferenceMaker::ReplaceReference().

Parameters

i	- The index of the reference to store. Valid values are from 0 to NumRefs()-1.
rtarg	- The reference handle to store.

Reimplemented from ReferenceMaker.

virtual PFExport RefResult NotifyRefChanged ( const Interval &  changeInt, RefTargetHandle  hTarget, PartID &  partID, RefMessage  message, BOOL  propagate  )

virtual

Receives and responds to messages.

A plugin which makes references must implement a method to receive and respond to messages broadcast by its dependents. This is done by implementing NotifyRefChanged(). The plugin developer usually implements this method as a switch statement where each case is one of the messages the plugin needs to respond to. The Method StdNotifyRefChanged calls this, which can change the partID to new value. If it doesn't depend on the particular message& partID, it should return REF_DONTCARE.

• For developer that need to update a dialog box with data about an object you reference note the following related to this method: This method may be called many times. For instance, say you have a dialog box that displays data about an object you reference. This method will get called many time during the drag operations on that object. If you updated the display every time you'd wind up with a lot of 'flicker' in the dialog box. Rather than updating the dialog box each time, you should just invalidate the window in response to the NotifyRefChanged() call. Then, as the user drags the mouse your window will still receive paint messages. If the scene is complex the user may have to pause (but not let up on the mouse) to allow the paint message to go through since they have a low priority. This is the way many windows in 3ds Max work.

Parameters

changeInt	- This is the interval of time over which the message is active. Currently, all plug-ins will receive FOREVER for this interval, with the exception of REFMSG_FLAGDEPENDENTS notifications. In that case, changeInt.Start() is the timepoint to perform the dependency test.
hTarget	- This is the handle of the reference target the message was sent by. The reference maker uses this handle to know specifically which reference target sent the message.
partID	- This contains information specific to the message passed in. Some messages don't use the partID at all. See the section List of Reference Messages for more information about the meaning of the partID for some common messages.
message	- The message parameters passed into this method is the specific message which needs to be handled.
propagate	- If called through ReferenceMaker::NotifyDependents(), the value of 'propagate' passed to it. Used if calling NotifyDependents() from within NotifyRefChanged().

Returns

The return value from this method is of type RefResult. This is usually REF_SUCCEED indicating the message was processed. Sometimes, the return value may be REF_STOP. This return value is used to stop the message from being propagated to the dependents of the item.

Implements ReferenceMaker.

virtual PFExport int RemapRefOnLoad ( int  iref )

virtual

Used to load old files with references.

Implement this if you have added or deleted references and are loading an old file that needs to have its references remapped. This method is used when you have modified a ReferenceMaker to add or delete references, and are loading old files. It gets called during the reference mapping process, after the Load() method is called. You determine what version is loading in the Load(), and store the version in a variable which you can look at in RemapRefOnLoad() to determine how to remap references. The default implementation of this method just returns the same value it is passed, so you don't need to implement it unless you have added or deleted references from your class. This method makes it a lot easier to load old files when the reference topology has changed.

Parameters

iref	- The input index of the reference.

Returns

The output index of the reference.

Reimplemented from ReferenceMaker.

virtual PFExport IOResult Save ( ISave *  isave )

virtual

Called for saving data.

Called by the system to allow the plugin to save its data.

Parameters

isave

- This pointer may be used to call methods to write data to disk. See the section on Loading and Saving Plug-in Data for an overview of the load/save process.

Returns

The default implementation is return IO_OK.

• IO_OK means the result was acceptable, with no errors.
• IO_ERROR This should be returned if an error occurred.

Reimplemented from ReferenceMaker.

virtual PFExport IOResult Load ( ILoad *  iload )

virtual

Called for loading data.

Called by the system to allow the plug-in to load its data. See the section on Loading and Saving Plug-in Data for an overview of the load - save process.

Parameters

iload

- This interface pointer may be used to call methods to read data from disk.

Returns

The default implementation is return IO_OK.

• IO_OK means the result was acceptable, with no errors.
• IO_ERROR This should be returned if an error occurred.

Reimplemented from ReferenceMaker.

virtual PFExport void NotifyTarget ( int  message, ReferenceMaker *  hMaker  )

inlinevirtual

Sends messages to ReferenceTargets.

This method is available in release 4.0 and later only. Used by a ReferenceMaker to send 'reverse' notification messages to its ReferenceTargets, or to this ReferenceTarget.

Parameters

message	- The message sent to the reference target.
hMaker	- The ReferenceMaker sending the message.

Reimplemented from ReferenceTarget.

{ SlateModelWrapper::RefMakerNotifyTarget( message, hMaker ); }

virtual CreateMouseCallBack* GetCreateMouseCallBack ( )

inlinevirtual

This method allows the system to retrieve a callback object used in creating an object in the 3D viewports.

This method returns a pointer to an instance of a class derived from CreateMouseCallBack. This class has a method proc() which is where the programmer defines the user/mouse interaction during the object creation phase.

Returns

A pointer to an instance of a class derived from CreateMouseCallBack.

Implements BaseObject.

{ return OneClickCreateCallBack::Instance(); }

virtual BOOL OKToChangeTopology ( MSTR &  modName )

inlinevirtual

Implemented by the System.

This method is called to see if any modifiers down in the pipeline depend on topology. It sends the message REFMSG_IS_OK_TO_CHANGE_TOPOLOGY to see if any modifiers or objects down the pipeline depend on topology.

Parameters

modName

This parameter is set to the dependent modifier's name if there is an item that depends on topology.

Returns

TRUE if it is okay to change the topology; FALSE if it is not okay to change the topology.

Reimplemented from BaseObject.

{ return FALSE; }

virtual void InitNodeName ( MSTR &  s )

inlinevirtual

Implemented by the System.

Sets the default node name to "Helper".

Reimplemented from HelperObject.

{ s = GetObjectName(); }

virtual ObjectState Eval ( TimeValue  t )

inlinevirtual

This method is called to evaluate the object and return the result as an ObjectState.

When the system has a pointer to an object it doesn't know if it's a procedural object or a derived object. So it calls Eval() on it and gets back an ObjectState. A derived object managed by the system may have to call Eval() on its input for example. A plug-in (like a procedural object) typically just returns itself. A plug-in that does not just return itself is the Morph Object (/MAXSDK/SAMPLES/OBJECTS/MORPHOBJ.CPP). This object uses a morph controller to compute a new object and fill in an ObjectState which it returns.

Parameters

t	Specifies the time to evaluate the object.

Returns

The result of evaluating the object as an ObjectState.

Sample Code:

Typically this method is implemented as follows:

{ return ObjectState(this); }

Implements Object.

{ return ObjectState(this); }

virtual void GetClassName ( MSTR &  s )

inlinevirtual

Retrieves the (localizable) name of the plugin class.

This name is usually used internally for debugging purposes. For Material plug-ins this method is used to put up the material "type" name in the Material Editor.

Parameters

s	Reference to a string filled in with the name of the plugin class

Reimplemented from ReferenceTarget.

{ ; }

virtual Class_ID ClassID ( )

inlinevirtual

Retrieves a constant that uniquely identifies the plugin class.

This method must return the unique ID for the plugin class. If two ClassIDs conflict, the system will only load the first conflicting one it finds. A program (gencid.exe) is provided to generate unique class id values.

Returns

A class id that uniquely identifies a plugin class

See also

Class ClassID, class ID definititions in plugapi.h.

Reimplemented from Animatable.

{ return Class_ID(0,0); }

virtual void BeginEditParams ( IObjParam *  ip, ULONG  flags, Animatable *  prev  )

pure virtual

Remarks

This method is called by the system when the user may edit the item's (object, modifier, controller, etc.) parameters.

Parameters

ip	Interface pointer. The developer can use it to call methods such as AddRollupPage(). Note that this pointer is only valid between BeginEditParams() and EndEditParams(). It should not be used outside this interval.
flags	Describe which branch of the command panel or dialog the item is being edited in. The following are possible values: BEGIN_EDIT_CREATE Indicates an item is being edited in the create branch. BEGIN_EDIT_MOTION Indicates a controller is being edited in the motion branch. BEGIN_EDIT_HIERARCHY Indicates a controller is being edited in the Pivot subtask of the hierarchy branch. BEGIN_EDIT_IK Indicates a controller is being edited in the IK subtask of the hierarchy branch. BEGIN_EDIT_LINKINFO Indicates a controller is being edited in the Link Info subtask of the hierarchy branch.
prev	Pointer to an Animatable object. This parameter may be used in the motion and hierarchy branches of the command panel. This pointer allows a plug-in to look at the ClassID of the previous item that was being edited, and if it is the same as this item, to not replace the entire UI in the command panel, but simply update the values displayed in the UI fields. This prevents the UI from 'flickering' when the current item begins its edit. For example, if you are in the motion branch and are looking at an item's PRS controller values, and then select another item that is displayed with a PRS controller, the UI will not change - only the values displayed in the fields will change. If however you selected a target camera that has a lookat controller (not a PRS controller) the UI will change because a different set of parameters need to be displayed. Note that for items that are edited in the modifier branch this field can be ignored.

Reimplemented from Animatable.

virtual void EndEditParams ( IObjParam *  ip, ULONG  flags, Animatable *  next  )

pure virtual

Remarks

This method is called when the user is finished editing an objects parameters. The system passes a flag into the EndEditParams() method to indicate if the rollup page should be removed. If this flag is TRUE, the plug-in must un-register the rollup page, and delete it from the panel.

Parameters

ip	An interface pointer. The developer may use the interface pointer to call methods such as DeleteRollupPage().
flags	The following flag may be set: END_EDIT_REMOVEUI If TRUE, the item's user interface should be removed.
next	Animatable pointer. Can be used in the motion and hierarchy branches of the command panel. It allows a plug-in to look at the ClassID of the next item that was being edited, and if it is the same as this item, to not replace the entire UI in the command panel. Note that for items that are edited in the modifier branch this field can be ignored.

Reimplemented from Animatable.

virtual RefTargetHandle Clone ( RemapDir &  remap )

pure virtual

This method is used by 3ds Max to clone an object.

See also

CloneRefHierarchy(), class RemapDir This method is called by 3ds Max to have the plugin clone itself. The plug-in's implementation of this method should copy both the data structure and all the data residing in the data structure of this reference target. The plugin should clone all its references as well. Also, the plug-in's implementation of this method must call BaseClone(). In order for classes derived from this class to clone cleanly, the Clone method should just create the new instance, and then call an implementation of BaseClone that clones the references and copies any other necessary data. For example:

class MyDerivedPlugin
    : public MyBasePlugin
{
    const int MY_REFERENCE = 1;

    ReferenceTarget* Clone(RemapDir& remap)
    {
        ReferenceTarget* result = new MyDerivedPlugin();
        BaseClone(this, result, remap);
        return result;
    }

    void BaseClone(ReferenceTarget* from, ReferenceTarget* to, RemapDir& remap)
    {
        if (!to || !from || from == to)
            return;    
        MyBasePlugin::BaseClone(from, to, remap);
        to->ReplaceReference(MY_REFERENCE, remap->CloneRef(from->GetReference(MY_REFERENCE)));
    }
};

This method should not be directly called by plug-ins. Instead, either RemapDir::CloneRef() or CloneRefHierachy() should be used to perform cloning. These methods ensure that the mapping from the original object to the clone is added to the RemapDir used for cloning, which may be used during backpatch operations

Note

See the remarks in method BaseClone() below.

Parameters

remap

- A RemapDir instance used for remapping references during a Clone.

Returns

A pointer to the cloned item.

Reimplemented from ReferenceTarget.

virtual const MCHAR* GetObjectName ( )

pure virtual

Returns

the name that will appear in the history browser (modifier stack).

Reimplemented from BaseObject.

virtual PFExport bool Init ( IObject *  pCont, Object *  pSystem, INode *  node, Tab< Object * > &  actions, Tab< INode * > &  actionNodes  )

virtual

Returns true if the operation has been proceeded successfully.

The method is called when the ActionList is established the first time, when there is a first particle that enters the ActionList and there is a need to proceed particles. /param pCont: particle container with particle data /param pSystem: the particle system that generates the particle stream; the same operator may get calls from different particle systems; if the result varies according to the particle system that generates particles, then this parameter is useful. /param pNode: INode of the particle system that generates the particles. /param actions: Tab<Object*> of Actions in the current ActionList. The stack will be used to proceed particles. The stack is mutable: an Action may change the stack (to remove or add some Actions) to fine-tune the order of execution or add some extra actions. The next parameter should sync with the mutation. /param actionNodes: Tab<INode*> of action nodes.

Implements IPFAction.

virtual PFExport bool Release ( IObject *  pCont )

virtual

See Init().

Implements IPFAction.

virtual bool SupportRand ( ) const

inlinevirtual

An Action may carry some chaos/unpredictibility in its processing.

This method supports chaos randomness.

Implements IPFAction.

{ return false; }

virtual int GetRand ( )

inlinevirtual

For chaos/unpredictibility action, gets rand value.

Implements IPFAction.

{ return 0; }

virtual void SetRand ( int  seed )

inlinevirtual

For chaos/unpredictibility action, sets rand value.

Implements IPFAction.

{ ; }

virtual PFExport int NewRand ( )

virtual

virtual const ParticleChannelMask& ChannelsUsed ( const Interval &  time ) const

pure virtual

See Init().

Implements IPFAction.

virtual const Interval ActivityInterval ( ) const

pure virtual

Casting the FPValue->ptr parameter to Tab<Interface_ID>* as in PFExport void ChannelsUsed(...); an Action may have a time interval when the Action is active.

Outside this interval the Action does nothing, therefore there is no need to proceed particles outside the activity interval.

Implements IPFAction.

virtual PFExport IObject* GetCurrentState ( IObject *  pContainer )

virtual

Returns action state (see IPFActionState.h for details).

You have to delete the IObject by DeleteIObject method when the state is no longer needed.

Reimplemented from IPFAction.

virtual PFExport void SetCurrentState ( IObject *  actionState, IObject *  pContainer  )

virtual

Sets the state of the action to the given state.

Reimplemented from IPFAction.

virtual int NumPViewParamBlocks ( ) const

inlinevirtual

Implements IPViewItem.

{ return 1; } // the paramBlock

virtual PFExport IParamBlock2* GetPViewParamBlock ( int  i ) const

virtual

Implements IPViewItem.

virtual ClassDesc* GetClassDesc ( ) const

pure virtual

PFExport void RefreshUI	(	WPARAM	message,
		IParamMap2 *	map = NULL
	)		const

PFExport void UpdatePViewUI

(

ParamID

updateID

)

const

IParamBlock2* pblock ( ) const

inline

{ return m_pblock; }

const RandObjLinker& randLinker ( ) const

inline

{ return m_randLinker; }

IParamBlock2*& _pblock ( )

inline

{ return m_pblock; }

RandObjLinker& _randLinker ( )

inline

{ return m_randLinker; }

Member Data Documentation

IParamBlock2* m_pblock

protected

RandObjLinker m_randLinker

protected