The Cut View Title

Learn how to control the way the cut view title will appear on the drawing, using the drawing style settings.

To access the Drawing Style Manager:

• Command line: _AstM5DetailStylesManagerNew
• In the Output tab Document Manager panel, click (Drawing Style Manager).

To access and configure the Cut View Title of a drawing style:

1. In the Drawing Style Manager, click on one of the available drawing styles in the User category (e.g. User 0 - Engineering 0 - Plan View - Line).
2. On the right side of the Drawing Style Manager dialog, click the Cut View Title tab.

The cut view title setting controls only how the cut view name will appear and how it will use the information from the symbol (e.g. the label name like A, B…1, 2) and any other text.

Each drawing style has a set of properties you can configure. The Cut View Title tab offers the option to control the position of the cut view and the title content (using a standard text editor).

By default, the title configuration contains a name (Section) and a token that will display the value of the cut name, from the cut symbol.

You can add other tokens to the cut view title, if needed. The available cut view title tokens in the drop-down list are:

Token	Description
Main part mark	Shows the main part mark of an assembly.
Scale	Shows the current cut view scale.
Single part mark	Shows the single part mark of an object.
View Number (A - A)	Shows the cut view number. Note: To change the cut view numbering type: In the Tools tab Tools panel, click (Management tools). In Management Tools, navigate to Defaults Drawing-Labeling Cut view names numbering type. Select the desired numbering type from the drop-down list (capital letters, small letters or numbers).
View Number (A)	Shows the cut view number using a single letter.