Use this tab to view data about a profile associated with the alignment.
- Name
-
Specifies the name of the profile.
- Description
-
Specifies an optional description for the profile.
- Type
-
Specifies whether the current profile represents the existing ground or a finished grade.
- Surface Name
-
Displays the name of the surface from which the EG Profile gets elevations.
- Offset
-
Specifies the offset distance from the centerline of the parent horizontal alignment: either 0 for a centerline profile, a positive number for a right offset, or a negative number for a left offset.
- Update Mode
-
For existing ground profiles only. Specifies whether the profile updates automatically to reflect changes in surface elevation.
- Dynamic: The profile automatically updates to reflect changes in the surface elevation or the geometry of the parent horizontal alignment.
- Static: The profile shows surface elevations at the time of its creation. It does not update to reflect changes that occur later.
- Layer
-
Specifies the drawing layer on which the profile is placed.
- Style
-
Specifies the style used by the profile.
- Station Start/End
-
Specifies the first and last station numbers for the profile. The station numbers represent distances along the parent horizontal alignment.
- Elevation Minimum/Maximum
-
Specifies the highest and lowest elevation values that occur along the profile.