Displays the cut order for confirmation or editing. To access this feature, click Profiler
Cut Order.
The Cut Order numbers are each displayed in a green box, as shown above. As the cursor is moved over an island lead in, the Cut Order box is highlighted red.
To re-order the islands starting from 1:
- Click over the required Lead In position.
The number 1 is surrounded by a white box.
- Move to each island in turn and click.
Inner and center line islands should be processed before the outer island.
- If you make a mistake, or only need to re-order from a particular island, click on the Island "Cut No" that you wish the new sequence to start from, and then right-click.
All of the islands up to this number will be highlighted in white. Higher numbers will be highlighted in green.
- Click on the next island required in the sequence.
- If using multiple tools, it is recommended that all islands processed by the same tool are located together.