The following table shows you how to set PartMaker Process Parameter options based on the settings on your Machine Tool's control.
|
Machine control settings |
PartMaker settings |
|---|---|
|
The nose radius is not entered on the Control, or Nose Radius Compensation is not supported by the Control's canned cycle. Tool wear is not supported. |
Output Profile — Compensated. Nose Radius Compensation — None. |
|
The nose radius is not entered on the Control, or Nose Radius Compensation is not supported by the Control's canned cycle. Tool wear is entered on the control. |
Output Profile — Compensated. Nose Radius Compensation — Left or Right. |
|
The nose radius is entered on the Control and Nose Radius Compensation is supported by the control during a canned cycle. |
Output Profile — Programmed. Nose Radius Compensation — Left or Right. |