2025.4 Update
December-2025
| Add-Ins - Content Center |
|---|
| Resolved issue with cell colors: For expression columns, the values are now displayed in blue; for other columns, they are displayed in black. INVGEN-74895 |
| Resolved issue where Content Center components were not recognized after updating CC parts. INVGEN-80544 |
| Resolved issue where the user was unable to update a custom Content Center library. INVGEN-84038 |
| Resolved issue where a Content Center part showed as out of date after refresh. INVGEN-84378 |
| Resolved issue where the "Standard Component Refresh" action for custom Content Center files failed for particular families. INVGEN-87418 |
| Add-Ins - Data Exchange |
|---|
| Improved stability when loading a data exchange into Inventor. INVGEN-85904 |
| Add-Ins - Design Accelerator |
|---|
| Resolved issue when adding a Bolted Connection to a frame member By Hole and with Follow Pattern checked, which added extra holes in a different location and different part. INVGEN-83895 |
| Resolved issue when a bolted connection was applied to different faces of the same part. INVGEN-84627 |
| Add-Ins - Drag and Drop |
|---|
| Improved stability when dragging the hole feature. INVGEN-83938 |
| Add-Ins - Frame Generator |
|---|
| Resolved issue where Break Reuse Members is not working for a specific part in design. INVGEN-83385 |
| Resolved issue where the end treatment of Frame Generator fails due to change in skeletal model size. INVGEN-83722 |
| Resolved issue when Frame Generator trim/extend stops working after second sketch change. INVGEN-83916 |
| Improved stability while inserting frames and zooming in and out. INVGEN-84963 |
| Improved stability during Structural Shape authoring when choosing a notch profile for an angle. INVGEN-85908 |
| Resolved issue that fixed the Frame Generator preview when re-using existing frames for specific custom profiles. INVGEN-87007 |
| Add-Ins - Simulation - Dynamic Simulation |
|---|
| Resolved issue in Dynamic Simulation where joint normals kept flipping upon model recompute. INVGEN-83560 |
| Add-Ins - Simulation - Frame Analysis |
|---|
| Improved stability when simulating the frame analysis. INVGEN-85484 |
| Add-Ins - Simulation - Stress Analysis |
|---|
| Improved stability when activating the stress/frame analysis add-in with a 3D mouse. INVGEN-84212 |
| Add-Ins - Task Scheduler |
|---|
| Resolved issue where Task Scheduler stopped running on multiple processes. INVGEN-67056 |
| Add-Ins - Tube and Pipe |
|---|
| Improved stability while using "Routed Systems: Cable & Harness" and "Routed Systems: Tube & Pipe" add-in. INVGEN-85382 |
| Resolved issue where the fitting thickness was not maintained when creating a pipe run. INVGEN-85384 |
| Add-Ins - iLogic |
|---|
| Resolved issue where shortcuts were not working after running an iLogic rule. INVGEN-84379 |
| Resolved issue where the iLogic function DeleteAllRulesInDocument threw an error when called from a rule in the document. INVGEN-85927 |
| Assemblies |
|---|
| Improved stability when updating assemblies. INVGEN-86699 |
| Assemblies - Derived - Simplify |
|---|
| Resolved issue where the Include command was grayed out in drawing. INVGEN-82133 |
| Improved stability when editing a simplified assembly. INVGEN-85972 |
| Cloud Services - Inventor IO |
|---|
| Resolved issue with 3D annotation improvement during SVF export generation on the Autodesk Platform service. INVGEN-68752 |
| Drawings |
|---|
| Resolved issue where table row visibility was lost when opened in a different language version. INVGEN-82057 |
| Improved stability when using an AutoCAD drawing in Inventor. INVGEN-83534 |
| Resolved issue with incorrect thumbnail size in the drawing. INVGEN-85209 |
| Drawings - Balloons |
|---|
| Resolved issue where the number of balloons attached to a virtual part changed when the balloon was dragged. INVGEN-86034 |
| Improved stability when selecting a line of a parts list. INVGEN-86737 |
| Drawings - Dimensions |
|---|
| Improved stability when editing dimensions using an API. INVGEN-85021 |
| Drawings - Print - Plot |
|---|
| Resolved issue of an extra unknown block or view being noticed in preview and printing of IDW files in Inventor. INVGEN-77456 |
| Improved stability when viewing a print preview of a drawing that is rotated by 90 degrees. INVGEN-85782 |
| Drawings - Tables |
|---|
| Resolved issue where a backslash was replaced by a double-backslash in the revision table. INVGEN-84046 |
| Resolved issue that opened an incorrect document from a split part list table with elements in reversed order. INVGEN-85037 |
| Drawings - Text |
|---|
| Resolved issue where the property source of drawing notes was getting lost. INVGEN-83959 |
| Resolved issue where the GeneralNote.FormattedText.Replace(OldText, NewText) function broke ordered number lists. INVGEN-84671 |
| Drawings - True Connect |
|---|
| Resolved issue while editing view after using Save Copy As for Inventor DWG drawing. INVGEN-85577 |
| Drawings - Views - Aux - Section - Detail |
|---|
| Resolved issue where the hatch on the large-scale views was rendered outside of the geometry. INVGEN-85832 |
| Improved stability when creating drawing section or detail views. INVGEN-86820 |
| Drawings - Views - Base - Projected - Overlay - Other |
|---|
| Resolved issue where hatches were missing after rebuilding all on a model. INVGEN-83490 |
| Model States |
|---|
| Resolved issue where model state properties had incorrect values. INVGEN-86513 |
| Parts |
|---|
| Improved stability while opening the IDW. INVGEN-83991 |
| Improved stability when clearing the note glyph node in Notebook environment. INVGEN-86585 |
| Parts - 2D Sketch |
|---|
| Improved stability when Inventor was updated to a new version. INVGEN-77236 |
| Improved stability when the Split feature was reordered. INVGEN-83796 |
| Improved stability when updating model state. INVGEN-84684 |
| Improved the stability when updating the sketch. INVGEN-85150 |
| Resolved issue where the parameter of the sketch pattern pitch could not be seen. INVGEN-85353 |
| Improved stability by resolving the issue where checking the SketchCircularPattern Fitted option caused Inventor to crash. INVGEN-85715 |
| Improved the stability when editing the sketch. INVGEN-87429 |
| Parts - 3D Sketch |
|---|
| Improved stability when a 3D sketch was deleted. INVGEN-83035 |
| Resolved issue where Inventor would close unexpectedly after trimming a line in sketch and pressing enter. INVGEN-84771 |
| Parts - Derive |
|---|
| Improved boundary pattern recognition. INVGEN-84383 |
| Parts - Extrude - Revolve - Sweep - Coil |
|---|
| Improved stability by resolving the edit feature failure. INVGEN-86500 |
| Parts - Finish Feature |
|---|
| Resolved issue where the area of the Finish feature was incorrectly computed. INVGEN-83258 |
| Parts - Loft - Draft |
|---|
| Improved stability when deleting the sketch while creating a surface loft. INVGEN-86521 |
| Parts - Mirror - Pattern |
|---|
| Improved stability when restoring the second framework window from being minimized. INVGEN-85365 |
| Parts - Sheet Metal - Face - Flange - Contour Flange - Corner Seam |
|---|
| Resolved issue where, when opening previous version data that created contour flanges in two directions from one sketch, the position of the second contour flange moved. INVGEN-84207 |
| Platform |
|---|
| Improved the performance of saving files. INVGEN-66714 |
| Improved stability with Sheet Metal features. INVGEN-77257 |
| Improved stability when closing an assembly. INVGEN-83648 |
| Improved stability when panning or zooming. INVGEN-83845 |
| Improved stability when closing a document. INVGEN-83937 |
| Improved stability when editing a sketch. INVGEN-83939 |
| Improved stability when activating a Sketch. INVGEN-83947 |
| Improved stability when canceling out of the Sketch Doctor. INVGEN-83954 |
| Improved stability when editing a loft. INVGEN-83984 |
| Improved stability when opening a document and the model browser is updating. INVGEN-84000 |
| Improved stability when using a fence selection to trim or extend geometry in the sketch environment. INVGEN-84003 |
| Improved stability when opening referenced documents from the parts list. INVGEN-84531 |
| Improved stability when creating an assembly constraint. INVGEN-84561 |
| Improved stability when creating or opening new files. INVGEN-85452 |
| Improved stability updating the mass properties of an assembly. INVGEN-86767 |
| Platform - API |
|---|
| Improved stability when closing all documents that had been checked into the Vault. INVGEN-83765 |
| Platform - Framework |
|---|
| Improved stability by ensuring the Design Assistant closes when its associated document is closed, preventing potential crashes. INVGEN-83591 |
| Resolved issue where editing an embedded image correctly opened in the editor instead of Windows Explorer. INVGEN-84736 |
| Importing application options setting from the command line no longer overrides the iLogic external paths. INVGEN-85237 |
| Improved stability during application shutdown. INVGEN-85514 |
| Platform - Graphics |
|---|
| Resolved issue of exporting images with the transparency background turned on. INVGEN-84327 |
| Resolved issue where the mouse cursor turned into a loading icon when it moved over a part. INVGEN-85410 |
| Improved stability when terminating commands and clearing graphics. INVGEN-85882 |
| Presentations |
|---|
| Improved stability when a presentation file was opened. INVGEN-84990 |
| Improved stability when editing the storyboard of a presentation file. INVGEN-86083 |
| Translators - DWG - DXF |
|---|
| Improved stability when exporting to dwg. INVGEN-83681 |
| Translators - Revit |
|---|
| Resolved issue when exporting RVT files with FipsAlgorithmPolicy set to true. INVGEN-83897 |
| UI - Ribbon - QT - Document Tab |
|---|
| Resolved issue where clicking on the Home tab caused Inventor to incorrectly revert to the document. INVGEN-83723 |
| iAssembly - iPart |
|---|
| Improved stability when switching iAssembly member. INVGEN-87078 |