| T2090
|
FATAL ERROR: T2090
|
INVALID OR INCOMPLETE TABLE DATA FOR NONLINEAR MATERIAL
|
|
|
Cause:
|
A
MATS1 Bulk Data entry referenced an invalid or non-corresponding
TABLES1 entry.
|
|
|
Action:
|
If the material type is PLASTIC:
- Check that the first point in the table is (0.0, 0.0).
- Check that the second point corresponds to the initial yield point.
- Check that at least a third data point is provided to describe the material plastic behavior.
- Check that the slope of the line joining the origin to the yield point equals the Young’s modulus (E) specified on the corresponding
MATi Bulk Data entry.
If the material type is NLELAST (nonlinear elastic):
- If the table is defined in the first quadrant only, check that the first point in the table is (0.0, 0.0).
- If the table is defined in the first and third quadrants, check that one of the points in the table is (0.0, 0.0).
|
|
|
Remarks:
|
See Autodesk Nastran Reference Guide, Section 4,
Bulk Data, for entry format.
|
