- This procedure begins with pipe routing in-progress.
If you are not at the Specify Next Point prompt do the following:
- On the ribbon, click Home tab
Part Insertion panel Route Pipe. - In the drawing, click to specify a start point.
- On the ribbon, click Home tab
- Hold down SHIFT and right-click in the drawing area, click Node.
- Move your mouse over an open port. Click the Node object snap.
If a path to the open port cannot be found, you cannot continue this procedure. You can use precision placement to align the pipe route with the port (For example: route the pipe to a matching elevation) and start this procedure again.
- If multiple solutions are available do the following:
- At the command prompt, enter n (Next).
- Continue pressing ENTER until the solution that you want to use displays.
- At the command prompt, enter a (Accept).
- At the command prompt, enter n (Next).