The Calculation Options option allows for setting the parameters / calculation options to be used during concrete column design. The option is available from:
- the menu after selecting the Analysis > Calculation Options command or
- the toolbar after selecting the 'Calculation Options' icon
.
The dialog box consists of the following tabs (two of them are summarized here under one name: Reinforced Steel Parameters):
- General Options (Beams/Columns/Continuous footings)
- General Options (Deep-Beams)
- General (Walls)
- General Options (Foundations)
- Concrete Parameters
- General (RC slabs)
- Reinforcing Steel Parameters (Longitudinal Reinforcement and Transversal Reinforcement)
The Additional reinforcement tab is also available for the RC beams. It refers to parameters of the following reinforcement types available in the RC beams:
- longitudinal construction reinforcement
- assembly hooks, bursting hooks
- anti-shrinkage reinforcement
- reinforcement of struts.
The Calculation options dialog box in the Deep beams, Walls and RC Slabs modules contains an additional tab: Wire fabrics. For RC slabs there is still another tab displayed Reinforcement for punching.
Selecting any of the tabs changes the dialog box contents and allows for the definition of appropriate calculation options.
Standard buttons (OK, Cancel, Help) as well as the Set as Default and Restore Default are located in the right part of the dialog box.