The DividedSurface type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | AllGridRotation | Angle of rotation applied to the U- and V- directions together. |
| AssemblyInstanceId |
The id of the assembly instance to which the element belongs.
(Inherited from Element) |
| BorderTile | Determines the handling of tiles that overlap the surface's boundary. |
 | BoundingBox | Retrieves a box that circumscribes all geometry of the element. (Inherited from Element) |
| Category | Retrieves a Category object that represents the category or sub category in which the
element resides. (Inherited from Element) |
| ComponentRotation | The rotation of the pattern by a multiple of 90 degrees. |
| CreatedPhaseId |
Id of a Phase at which the Element was created.
(Inherited from Element) |
| DemolishedPhaseId |
Id of a Phase at which the Element was demolished.
(Inherited from Element) |
| DesignOption | Returns the design option to which the element belongs. (Inherited from Element) |
| Document | Returns the Document in which the Element resides. (Inherited from Element) |
| Geometry | Retrieves the geometric representation of the element. (Inherited from Element) |
| GroupId |
The id of the group to which an element belongs.
(Inherited from Element) |
| Host | The element whose surface has been divided. |
| HostReference | A reference to the divided face on the host. |
| Id |
A unique identifier for an Element in an Autodesk Revit project.
(Inherited from Element) |
| IsComponentFlipped | Whether the pattern is flipped. |
| IsComponentMirrored | Whether the pattern is mirror-imaged. |
| IsModifiable |
Identifies if the element is modifiable.
(Inherited from Element) |
| IsTransient |
Indicates whether an element is transient or permanent.
(Inherited from Element) |
| IsValidObject |
Specifies whether the .NET object represents a valid Revit entity.
(Inherited from Element) |
| LevelId |
The id of the level associated with the element.
(Inherited from Element) |
| Location | This property is used to find the physical location of an element within a project. (Inherited from Element) |
| Name | A human readable name for the Element. (Inherited from Element) |
| NumberOfUGridlines | Get the number of U-gridlines used on the surface. |
| NumberOfVGridlines | Get the number of V-gridlines used on the surface. |
| OwnerViewId |
The id of the view that owns the element.
(Inherited from Element) |
| Parameter[BuiltInParameter] | Retrieves a parameter from the element given a parameter id. (Inherited from Element) |
| Parameter[Definition] | Retrieves a parameter from the element based on its definition. (Inherited from Element) |
| Parameter[Guid] | Retrieves a parameter from the element given a GUID for a shared parameter. (Inherited from Element) |
| Parameters | Retrieves a set containing all of the parameters that are contained within the element. (Inherited from Element) |
| ParametersMap | Retrieves a map containing all of the parameters that are contained within the element. (Inherited from Element) |
| Pinned |
Identifies if the element has been pinned to prevent changes.
(Inherited from Element) |
| UniqueId |
A stable unique identifier for an element within the document.
(Inherited from Element) |
| UPatternIndent | The offset applied to the pattern by an integral number of grid nodes in the U-direction. |
| USpacingRule | Access to the rule for laying out the first series of equidistant parallel lines on the surface. |
| VersionGuid |
Get the element version Guid.
(Inherited from Element) |
| ViewSpecific |
Identifies if the element is owned by a view.
(Inherited from Element) |
| VPatternIndent | The offset applied to the pattern by an integral number of grid nodes in the V-direction. |
| VSpacingRule | Access to the rule for laying out the second series of equidistant parallel lines on the surface. |
| WorksetId |
Get Id of the Workset which owns the element.
(Inherited from Element) |