Connector Properties

The Connector type exposes the following members.

Properties

	Name	Description
	AllowsSlopeAdjustments	Indicates if the connector allows the slope adjustment.
	AllRefs	All references of the connector.
	Angle	The angle of the Connector.
	AssignedDuctFlowConfiguration	The assigned duct flow configuration of the connector.
	AssignedDuctLossMethod	The duct loss method of the connector.
	AssignedFixtureUnits	The assigned fixture units of the connector.
	AssignedFlow	The assigned flow of the connector.
	AssignedFlowDirection	The assigned flow direction of the connector.
	AssignedFlowFactor	The assigned flow factor of this connector.
	AssignedKCoefficient	The assigned kCoefficient of the connector.
	AssignedLossCoefficient	The assigned loss coefficient of the connector.
	AssignedPipeFlowConfiguration	The pipe flow configuration type of the connector.
	AssignedPipeLossMethod	The pipe loss method of the connector.
	AssignedPressureDrop	The assigned pressure drop of the connector.
	Coefficient	The coefficient of the connector.
	ConnectorManager	The connector manager of the connector.
	ConnectorType	The connector type of the connector.
	CoordinateSystem	The coordinate system of the connector.
	Demand	The demand of the connector.
	Description	The description.
	Direction	The direction of the connector.
	Domain	The domain of the connector.
	DuctSystemType	The duct system type of the connector.
	ElectricalSystemType	The electrical system type of the connector.
	EngagementLength	Connector engagement length. When applicable, it represents the inset distance to the end of the fabrication part from the connection point. Otherwise it returns zero.
	Flow	The flow of the connector.
	GasketLength	Connector gasket length. When applicable, it represents the distance from the end of the fabrication part to the center of the gasket. Otherwise it returns zero.
	Height	The height of the connector.
	Id	A unique identifier to identify this connector.
	IsConnected	Identifies if the connector is physically connected to a connector on another element.
	IsMovable	whether the connector can be moved.
	IsValidObject	Specifies whether the .NET object represents a valid Revit entity.
	MEPSystem	The system of the connector belong to.
	Origin	The location of the connector.
	Owner	The host of the connector.
	PipeSystemType	The pipe system type of the connector.
	PressureDrop	The pressure drop of the connector.
	Radius	The radius of the connector.
	Shape	The shape of the connector.
	Utility	Indicates if the connector is a utility connector.
	VelocityPressure	The velocity pressure of the connector.
	Width	The width of the connector.

See Also

Reference