FabricationPart Properties

The FabricationPart type exposes the following members.

Properties

	Name	Description
	Alias	The alias of the fabrication part.
	AssemblyInstanceId	The id of the assembly instance to which the element belongs. (Inherited from Element)
	BottomOfPartElevation	The associated elevation to the bottom of fabrication part off of the current level.
	BoundingBox	Retrieves a box that circumscribes all geometry of the element. (Inherited from Element)
	Category	Retrieves a Category object that represents the category or sub category in which the element resides. (Inherited from Element)
	CenterlineLength	The centerline length of the fabrication part.
	ConnectorManager	The connector manager of the fabrication part.
	CreatedPhaseId	Id of a Phase at which the Element was created. (Inherited from Element)
	CutType	The cut type of the fabrication part.
	DemolishedPhaseId	Id of a Phase at which the Element was demolished. (Inherited from Element)
	DesignOption	Returns the design option to which the element belongs. (Inherited from Element)
	Document	Returns the Document in which the Element resides. (Inherited from Element)
	DomainType	The domain type for the fabrication part.
	DoubleWallMaterial	The double wall material identifier of the fabrication part.
	DoubleWallMaterialArea	The double wall material area of the fabrication part. If the fabrication part is not double walled, returns zero.
	DoubleWallMaterialThickness	The double wall material thickness of the fabrication part. If the fabrication part is not double walled, returns zero.
	FreeSize	The inner size of the fabrication part.
	Geometry	Retrieves the geometric representation of the element. (Inherited from Element)
	GeometryChecksum	Gets the geometry checksum of the fabrication part symbol, and it does nothing with the fabrication part instance position.
	GroupId	The id of the group to which an element belongs. (Inherited from Element)
	HangerRodKit	Specifies whether an ancillary kit is being used to override support rods, bolts and clips, if any. A value of 0 indicates no override is being used.
	HasDoubleWall	True if the fabrication part is double walled.
	HasInsulation	True if the fabrication part is insulated.
	HasLining	True if the fabrication part is lined.
	Id	A unique identifier for an Element in an Autodesk Revit project. (Inherited from Element)
	InsulationArea	The insulation area of the fabrication part. If the fabrication part is not insulated, returns zero.
	InsulationSpecification	The fabrication part insulation specification identifier.
	InsulationThickness	The insulation thickness of the fabrication part. If the fabrication part is not insulated, returns zero.
	InsulationType	The insulation type of the fabrication part.
	IsBoughtOut	True if the fabrication part is bought out.
	IsModifiable	Identifies if the element is modifiable. (Inherited from Element)
	IsTransient	Indicates whether an element is transient or permanent. (Inherited from Element)
	IsValidObject	Specifies whether the .NET object represents a valid Revit entity. (Inherited from Element)
	ItemCustomId	The item custom identifier for the fabrication part.
	ItemNumber	The item number that is used for identification, re-ordering from shop.
	LevelId	The id of the level associated with the element. (Inherited from Element)
	LevelOffset	The associated level offset that indicates the distance from the center of the fabrication part to the current level.
	LiningArea	The lining area of the fabrication part. If the fabrication part is not lined, returns zero.
	LiningThickness	The lining thickness of the fabrication part. If the fabrication part is not lined, returns zero.
	LiningType	The lining type of the fabrication part.
	Location	This property is used to find the physical location of an element within a project. (Inherited from Element)
	Material	The fabrication material identifier.
	MaterialGauge	The fabrication material gauge identifier.
	MaterialThickness	The material thickness of the fabrication part.
	Name	A human readable name for the Element. (Inherited from Element)
	Notes	The notes of the fabrication part.
	Origin	The origin of the fabrication part element.
	OverallSize	The overall size of the fabrication part.
	OwnerViewId	The id of the view that owns the element. (Inherited from Element)
	Parameter[BuiltInParameter]	Retrieves a parameter from the element given a parameter id. (Inherited from Element)
	Parameter[Definition]	Retrieves a parameter from the element based on its definition. (Inherited from Element)
	Parameter[Guid]	Retrieves a parameter from the element given a GUID for a shared parameter. (Inherited from Element)
	Parameters	Retrieves a set containing all of the parameters that are contained within the element. (Inherited from Element)
	ParametersMap	Retrieves a map containing all of the parameters that are contained within the element. (Inherited from Element)
	PartGuid	The fabrication part's globally unique identifier.
	PartStatus	The status identifier for the fabrication part.
	Pinned	Identifies if the element has been pinned to prevent changes. (Inherited from Element)
	ProductCode	The current database id of the part within the fabrication database.
	ProductDataRange	The product data range of the fabrication part.
	ProductFinishDescription	The product finish description of the fabrication part.
	ProductInstallType	The product install type of the fabrication part.
	ProductListEntry	The product entry index of the fabrication part. A value of -1 indicates the fabrication part is not a product list.
	ProductLongDescription	The product long description of the fabrication part.
	ProductMaterialDescription	The product material description of the fabrication part.
	ProductName	The product name of the fabrication part.
	ProductOriginalEquipmentManufacture	The product original equipment manufacture (OEM) of the fabrication part.
	ProductShortDescription	The product short description of the fabrication part.
	ProductSizeDescription	The product size description of the fabrication part.
	ProductSpecificationDescription	The product specification description of the fabrication part.
	ServiceAbbreviation	The associated service abbreviation for the fabrication service.
	ServiceId	The fabrication part service identifier. The service can only be changed to compatible services.
	ServiceName	The name of the service associated with the fabrication part.
	ServiceType	The service type identifier of the fabrication part.
	SheetMetalArea	The sheet metal area of the fabrication part.
	Size	The size of the fabrication part.
	Slope	The slope for the straight fabrication part.
	Specification	The fabrication part specification identifier.
	SpoolName	The spool name of the fabrication part.
	TopOfPartElevation	The associated elevation to the top of fabrication part off of the current level.
	UniqueId	A stable unique identifier for an element within the document. (Inherited from Element)
	ValidationStatus	The validation status of the fabrication part.
	Vendor	The vendor of the fabrication part.
	VendorCode	The vendor code of the fabrication part.
	VersionGuid	Get the element version Guid. (Inherited from Element)
	ViewSpecific	Identifies if the element is owned by a view. (Inherited from Element)
	Weight	The weight of the fabrication part.
	WorksetId	Get Id of the Workset which owns the element. (Inherited from Element)

See Also

Reference