Breakout Section View reference
In the Breakout Section View dialog, you can edit the properties of a breakout section view in the Drawing workspace in Fusion.
Access the Breakout Section View dialog
Create > Breakout Section View .
View
Select the drawing view on which you want to create the breakout section.
Cut Profile
Select the sketch shape of the breakout cut.
- Spline: Draw your own shape.
Section Depth
Select a depth option for the breakout section.
Extent Type
Establishes the end point of the breakout section.
- Distance: Creates the breakout section to half of your design's depth by default or to a distance that you specify.
Distance
The distance is set to half of your design's depth by default, but you can type in any depth value.
Measure Half Depth
Click to go back to the default depth distance.
Reset Start Point
For modified design geometry, click to move the start point to the front of the design for depth calculation.
Objects to Cut
Uncheck components to exclude them from being cut through in a section view. Fasteners from the fasteners libraries are unchecked by default.