Access
Ribbon:
Inspect tab
Analysis panel
Curvature
Definition
Sets appearance of analysis results along each curve and edge of the selected geometry.
- Analysis name
- (Available in Part environment only.) Sets or modifies the name of the analysis. The first saved analysis is named Curvature1 by default.
Comb Density - Specifies the spacing between spines.
Comb Scale - Specifies the scale (length) of the spines.
Surface Density - Specifies the density of the sample curves for the interior faces. A higher density means there are more curve sample locations along the surface.
Selection
Sets the type of geometry to include in the analysis.
- Select button
-
Selects the geometry to analyze.
Faces Specifies if selected faces in a solid body or any surface body in the Part or Construction environment are analyzed.
Quilts Specifies if selected surface features and all faces in each selected surface feature are analyzed.
Groups (Available in Construction environment only.) Specifies if all faces in the selected construction groups are analyzed.
Wires (Available in Construction environment only.) Specifies if all imported wires are analyzed.
Direction
Sets the curvature comb display in the selected direction: Direction1, Direction2, or both.
Direction1 - Sets the curvature comb display to direction shown in the image.
Direction2 - Sets the curvature comb display to direction shown in the image.