To Chamfer With Dimension

1. Click Home tabModify panelFillet drop-downChamfer. Find
2. Press ENTER for Setup.
3. In the Chamfer dialog box:
   1. In Options, select the Insert dimension on chamfer check box.
   2. Select a value for the first length from the First chamfer length list or click to specify the length by clicking two points, or enter a value.
   3. Select a value for the second length from the Second chamfer length list or click to specify the length by clicking two points, or enter a value.
   4. Click OK.
4. Select the first object.
5. Select the second object, or press ENTER for polyline.
6. Press ESC to exit the command.