envChrome

Go to: Related nodes. Attributes.

The EnvChrome texture creates a simple by effective environment to simulate the reflections off chrome surfaces. The basic environment map consists of a ground plane and a sky with fluorescent-style light rectangles.

These rectangular lights in the sky are there for visual effect only, and do not act as light sources in the scene.

To use this texture as an environment map, connect the Out Color attribute to the Reflected Color attribute of any specular shader, such as Blinn or Phong. (For chrome you will want to use a Blinn shader, with the Reflectivity attribute set to 1.0).

Aside from the attributes listed here, EnvChrome inherits additional attributes from TextureEnv.

In the table below, important attributes have their names listed in bold in the description column.

This node is MP safe

Related nodes

layeredTexture, envCube, envSphere, envSky, envBall, bump3d, uvChooser, bump2d, texture2d, ramp, file, cloth, water, stencil, checker, fractal, bulge, grid, mountain, texture3d, projection, cloud, granite, crater, leather, stucco, brownian, solidFractal, marble, wood, rock, snow, defaultTextureList, place2dTexture, place3dTexture

Attributes (42)

floorAltitude, floorColor, floorColorB, floorColorG, floorColorR, gridColor, gridColorB, gridColorG, gridColorR, gridDepth, gridDepthGain, gridDepthOffset, gridWidth, gridWidthGain, gridWidthOffset, horizonColor, horizonColorB, horizonColorG, horizonColorR, lightColor, lightColorB, lightColorG, lightColorR, lightDepth, lightDepthGain, lightDepthOffset, lightWidth, lightWidthGain, lightWidthOffset, pointCamera, pointCameraX, pointCameraY, pointCameraZ, realFloor, skyColor, skyColorB, skyColorG, skyColorR, zenithColor, zenithColorB, zenithColorG, zenithColorR

Long name (short name)	Type	Default	Flags
floorAltitude (fa)	float	-1.0
Floor Altitude controls the position of the floor along the vertical axis. If Real Floor is turned on, make sure that none of the surfaces or the camera in the scene go below this level.
floorColor (fc)	float3	0.588, 0.588, 0.784
Floor Color controls the color of the floor.
floorColorR (fcr) float 0.0 The red component of Floor Color
floorColorG (fcg) float 0.0 The green component of Floor Color
floorColorB (fcb) float 0.0 The blue component of Floor Color
gridColor (gc)	float3	0.0, 0.0, 0.0
Grid Color controls the color of the grid lines on the floor.
gridColorR (gcr) float 0.0 The red component of Grid Color
gridColorG (gcg) float 0.0 The green component of Grid Color
gridColorB (gcb) float 0.0 The blue component of Grid Color
gridDepth (gd)	float	0.1
Grid Depth controls the width of each of the grid lines running along the floor, relative to the space between them. Set this to 0.5, and the lines will be exactly as wide as the space between them. Set this to 0.9, and the lines will almost touch each other at the edges.
gridDepthGain (gdg)	float	1.0
Grid Depth Gain controls the distance between the grid lines that run along the floor. Increase Grid Depth Gain to spread them out, and decrease it to bring them closer together. Note: Since the width of the grid lines is set relative to the space between them, increasing this will also make the lines wider. (See Grid Depth).
gridDepthOffset (gdo)	float	0.0
Grid Depth Offset controls the positioning of the grid lines along the floor. You can increase or decrease this value to make the lines move back and forth without changing their width or spacing.
gridWidth (gw)	float	0.1
Grid Width controls the width of each of the grid lines running across the floor, relative to the space between them. Set this to 0.5, and the lines will be exactly as wide as the space between them. Set this to 0.9, and the lines will almost touch each other at the edges.
gridWidthGain (gwg)	float	1.0
Grid Width Gain controls the distance between the grid lines that run across the floor. Increase Grid Width Gain to spread them out, and decrease it to bring them closer together. Note: Since the width of the grid lines is set relative to the space between them, increasing this will also make the lines wider. (See Grid Width).
gridWidthOffset (gwo)	float	0.0
Grid Width Offset controls the positioning of the grid lines across the floor. You can increase or decrease this value to make the lines move back and forth without changing their width or spacing.
horizonColor (hc)	float3	0.0, 0.0, 0.0
Horizon Color controls the color of the floor at the horizon. The overall color of the floor is linearly interpolated between Floor Color and Horizon Color.
horizonColorR (hcr) float 0.0 The red component of Horizon Color
horizonColorG (hcg) float 0.0 The green component of Horizon Color
horizonColorB (hcb) float 0.0 The blue component of Horizon Color
lightColor (lc)	float3	0.784, 0.784, 1.0
Light Color controls the color of the grid of rectangular "lights" seen in the reflected sky. These lights are there for visual effect only; they do not act as real light sources in the scene.
lightColorR (lcr) float 0.0 The red component of Light Color
lightColorG (lcg) float 0.0 The green component of Light Color
lightColorB (lcb) float 0.0 The blue component of Light Color
lightDepth (ld)	float	0.1
Light Depth controls how Tint32 each of the rectangular lights in the sky is, relative to the space between them in that direction. Set this to 0.5, and the lights will be exactly as Tint32 as the space between them. Set this to 0.9, and the lights will almost touch each other at the edges.
lightDepthGain (ldg)	float	1.0
Light Depth Gain controls how far apart the lights in the sky are (in the Depth direction). Increase Light Depth Gain to spread them out, and decrease it to bring them closer together. Note: Since the length (depth) of the lights is set relative to the space between them, increasing this will also make the lights longer. (See Light Depth).
lightDepthOffset (ldo)	float	0.0
Light Depth Offset controls the positioning of the lights in the sky. You can increase or decrease this value to make the lights move closer or farther without changing their size or spacing.
lightWidth (lw)	float	0.5
Light Width controls how wide each of the rectangular lights in the sky is, relative to the space between them in that direction. Set this to 0.5, and the lights will be exactly as wide as the space between them. Set this to 0.9, and the lights will almost touch each other at the edges.
lightWidthGain (lwg)	float	1.0
Light Width Gain controls how far apart the lights in the sky are (in the Width direction). Increase Light Width Gain to spread them out, and decrease it to bring them closer together. Note: Since the width of the lights is set relative to the space between them, increasing this will also make the lights wider. (See Light Width).
lightWidthOffset (lwo)	float	0.0
Light Width Offset controls the positioning of the lights in the sky. You can increase or decrease this value to make the lights move left or right without changing their size or spacing.
pointCamera (p)	float3	0.0, 0.0, 0.0
The current sample point that has to be shaded
pointCameraX (px) float 0.0 The x component of the current sample position
pointCameraY (py) float 0.0 The y component of the current sample position
pointCameraZ (pz) float 0.0 The z component of the current sample position
realFloor (rf)	bool	true
Real Floor. If this is turned off, then the gridded floor in the environment acts as though it is infinitely far away (like the sky). Turn this on to make the floor seem to be a real floor. Note: when this is on, it is important that none of the surfaces (and the camera) in the scene project below the level of the floor. If they do, the calculated shading will be incorrect.
skyColor (sc)	float3	0.784, 0.784, 1.0
Sky Color controls the color of the reflected sky at the horizon. The overall color of the sky is linearly interpolated between Sky Color and Zenith Color.
skyColorR (scr) float 0.0 The red component of Sky Color
skyColorG (scg) float 0.0 The green component of Sky Color
skyColorB (scb) float 0.0 The blue component of Sky Color
zenithColor (zc)	float3	0.392, 0.392, 1.0
Zenith Color is the color of the sky at the zenith (looking straight up). The overall color of the sky is linearly interpolated between Sky Color and Zenith Color.
zenithColorR (zcr) float 0.0 The red component of Zenith Color
zenithColorG (zcg) float 0.0 The green component of Zenith Color
zenithColorB (zcb) float 0.0 The blue component of Zenith Color