pymel.core.modeling.polyMoveFacet¶

polyMoveFacet(*args, **kwargs)¶

Modifies facet of a polygonal object. Translate, move, rotate or scale facets.

Flags:

Long Name / Short Name		Argument Types	Properties
attraction / att		float
	Attraction, related to magnet. The range is [-2.0, 2.0]. Default:0.0
caching / cch		bool
	Toggle caching for all attributes so that no recomputation is needed
constructionHistory / ch		bool
	Turn the construction history on or off (where applicable). If construction history is on then the corresponding node will be inserted into the history chain for the mesh. If construction history is off then the operation will be performed directly on the object. Note:If the object already has construction history then this flag is ignored and the node will always be inserted into the history chain.
frozen / fzn		bool
gain / ga		float
	Gain factor per component. Can be painted using Artisan. Default:1.0
gravity / g		float, float, float
	The gravity vector. Default:0.0, -1.0, 0.0
gravityX / gx		float
	Gravity X coord.
gravityY / gy		float
	Gravity Y coord.
gravityZ / gz		float
	Gravity Z coord.
localCenter / lc		int
	Local center on the edge : 0=Middle point, 1=Start point, 2=End point. Default:0
localDirection / ld		float, float, float
	Direction to determine X axis for local space. Default:1.0, 0.0, 0.0
localDirectionX / ldx		float
	X coord of the X axis.
localDirectionY / ldy		float
	Y coord of the X axis.
localDirectionZ / ldz		float
	Z coord of the X axis.
localRotate / lr		float, float, float
	The local rotations. Default:0.0, 0.0, 0.0
localRotateX / lrx		float
	Local rotate X coord. The range is [0, 360].
localRotateY / lry		float
	Local rotate Y coord. The range is [0, 360].
localRotateZ / lrz		float
	Local rotate Z coord : Rotation along the normal. The range is [0, 360].
localScale / ls		float, float, float
	Local Scale. Default:1.0, 1.0, 1.0
localScaleX / lsx		float
	Scale X coord.
localScaleY / lsy		float
	Scale Y coord.
localScaleZ / lsz		float
	Scale Z coord.
localTranslate / lt		float, float, float
	Local translate. Default:0.0, 0.0, 0.0
localTranslateX / ltx		float
	Local translation X coord.
localTranslateY / lty		float
	Local translation Y coord.
localTranslateZ / ltz		float
	Local translation Z coord : Move along the normal.
magnX / mx		float
	Magnet X coord.
magnY / my		float
	Magnet Y coord.
magnZ / mz		float
	Magnet Z coord.
magnet / m		float, float, float
	The magnet vector. Default:0.0, 0.0, 0.0
name / n		unicode
	Give a name to the resulting node.
nodeState / nds		int
	Maya dependency nodes have 6 possible states. The Normal (0), HasNoEffect (1), and Blocking (2)states can be used to alter how the graph is evaluated. The Waiting-Normal (3), Waiting-HasNoEffect (4), Waiting-Blocking (5)are for internal use only. They temporarily shut off parts of the graph during interaction (e.g., manipulation). The understanding is that once the operation is done, the state will be reset appropriately, e.g. Waiting-Blockingwill reset back to Blocking. The Normaland Blockingcases apply to all nodes, while HasNoEffectis node specific; many nodes do not support this option. Plug-ins store state in the MPxNode::stateattribute. Anyone can set it or check this attribute. Additional details about each of these 3 states follow. StateDescriptionNormalThe normal node state. This is the default.HasNoEffectThe HasNoEffectoption (a.k.a. pass-through), is used in cases where there is an operation on an input producing an output of the same data type. Nearly all deformers support this state, as do a few other nodes. As stated earlier, it is not supported by all nodes. Its typical to implement support for the HasNoEffectstate in the nodes compute method and to perform appropriate operations. Plug-ins can also support HasNoEffect. The usual implementation of this state is to copy the input directly to the matching output without applying the algorithm in the node. For deformers, applying this state leaves the input geometry undeformed on the output. BlockingThis is implemented in the depend node base class and applies to all nodes. Blockingis applied during the evaluation phase to connections. An evaluation request to a blocked connection will return as failures, causing the destination plug to retain its current value. Dirty propagation is indirectly affected by this state since blocked connections are never cleaned. When a node is set to Blockingthe behavior is supposed to be the same as if all outgoing connections were broken. As long as nobody requests evaluation of the blocked node directly it wont evaluate after that. Note that a blocked node will still respond to getAttrrequests but a getAttron a downstream node will not reevaluate the blocked node. Setting the root transform of a hierarchy to Blockingwont automatically influence child transforms in the hierarchy. To do this, youd need to explicitly set all child nodes to the Blockingstate. For example, to set all child transforms to Blocking, you could use the following script. import maya.cmds as cmds def blockTree(root): nodesToBlock = [] for node in {child:1 for child in cmds.listRelatives( root, path=True, allDescendents=True )}.keys(): nodesToBlock += cmds.listConnections(node, source=True, destination=True ) for node in {source:1 for source in nodesToBlock}.keys(): cmds.setAttr( ‘%s.nodeState’ % node, 2 ) Applying this script would continue to draw objects but things would not be animated. Default:kdnNormal
offset / off		float
	Local offset. Faces are moved this distance towards the inside of the face. Default:0.0
pivot / pvt		float, float, float
	The pivot for scaling and rotation. Default:0.0, 0.0, 0.0
pivotX / pvx		float
	Pivot X coord.
pivotY / pvy		float
	Pivot Y coord.
pivotZ / pvz		float
	Pivot Z coord.
random / ran		float
	Random value for all parameters. Default:0.0
rotate / ro		float, float, float
	Rotation angles around X, Y, Z. Default:0.0, 0.0, 0.0
rotateX / rx		float
	Rotation angle around X.
rotateY / ry		float
	Rotation angle around Y.
rotateZ / rz		float
	Rotation angle around Z.
scale / s		float, float, float
	Scaling vector. Default:1.0, 1.0, 1.0
scaleX / sx		float
	Scale X coord.
scaleY / sy		float
	Scale Y coord.
scaleZ / sz		float
	Scale Z coord.
translate / t		float, float, float
	Translation vector. Default:0.0, 0.0, 0.0
translateX / tx		float
	Translation X coord.
translateY / ty		float
	Translation Y coord.
translateZ / tz		float
	Translation Z coord.
weight / w		float
	The weight, related to gravity. Default:0.0
worldSpace / ws		bool
	This flag specifies which reference to use. If on: all geometrical values are taken in world reference. If off: all geometrical values are taken in object reference. C: Default is off. Q: When queried, this flag returns an int. Flag can have multiple arguments, passed either as a tuple or a list.

Derived from mel command maya.cmds.polyMoveFacet

Example:

import pymel.core as pm

# Create a sphere.
pm.polySphere( n='plg', r=5 )

# Translate selected facets along Y by 1.0 in world coordinates
pm.polyMoveFacet( 'plg.f[300:359]', 'plg.f[380:399]', ty=1.0 )

# Scale selected facets by (0.5, 0.5, 0.5);
pm.polyMoveFacet( 'plg.f[0:59]', 'plg.f[360:379]', sx=0.5, sy=0.5, sz=0.5 )