PatchObject Class Reference

#include <patchobj.h>

Class Description

See also

Class GeomObject, Class IPatchOps, Class IPatchSelect, Class IPatchSelectData, Class ISubMtlAPI, Class AttachMatDlgUser, Class PatchMesh, Class Patch, Class Mesh, Class TessApprox, Patches and Faces.

class PatchObject : public GeomObject, IPatchOps, IPatchSelect, IPatchSelectData, ISubMtlAPI, AttachMatDlgUser

Description:

This class is the base class for the creation of Patch objects. This class stores an instance of a PatchMesh that holds all the Patches that make up this patch object. This class also maintains a Mesh cache. All methods of this class are implemented by the system.

Data Members:

PatchMesh patch;

The patch mesh for this patch object.

Mesh mesh;

The Mesh cache.

BOOL meshValid;

Indicates if the mesh cache is valid.

BOOL showMesh;

Indicates if the mesh is shown in the viewports

GenericNamedSelSetList vselSet;

This data member is available in release 3.0 and later only.

Vertex level named selection sets.

GenericNamedSelSetList eselSet;

This data member is available in release 3.0 and later only.

Edge level named selection sets.

GenericNamedSelSetList pselSet;

This data member is available in release 3.0 and later only.

Patch level named selection sets.

int patchSelSubType;

This data member is available in release 4.0 and later only.

The sub-object selection level, defined by;

PO_PATCH

Patch sub-object level. When SetSubobjectLevel(PO_PATCH) is called, both the PatchMesh selection

level and patchSelSubType are set to PO_PATCH.

PO_ELEMENT

Element sub-object level. When SetSubobjectLevel(PO_ELEMENT) is called, the PatchMesh selection level is set to PO_PATCH and patchSelSubType is set to PO_ELEMENT.

Inheritance diagram for PatchObject:

Public Member Functions
void	CopyValidity (PatchObject *fromOb, ChannelMask channels)
RefResult	NotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID &partID, RefMessage message, BOOL propagate)
	Receives and responds to messages. More...
CoreExport	PatchObject ()
CoreExport	PatchObject (PatchObject &from)
CoreExport void	PatchObjectInit ()
CoreExport	~PatchObject ()
virtual CoreExport unsigned long	GetObjectDisplayRequirement () const
virtual CoreExport bool	PrepareDisplay (const MaxSDK::Graphics::UpdateDisplayContext &prepareDisplayContext)
virtual CoreExport bool	UpdatePerNodeItems (const MaxSDK::Graphics::UpdateDisplayContext &updateDisplayContext, MaxSDK::Graphics::UpdateNodeContext &nodeContext, MaxSDK::Graphics::IRenderItemContainer &targetRenderItemContainer)
CoreExport PatchObject &	operator= (PatchObject &from)
void	SetFlag (DWORD fl, BOOL val=TRUE)
void	ClearFlag (DWORD fl)
bool	GetFlag (DWORD fl)
CoreExport int	HitTest (TimeValue t, INode *inode, int type, int crossing, int flags, IPoint2 *p, ViewExp *vpt)
	This method is called to determine if the specified screen point intersects the item. More...
CoreExport int	HitTest (TimeValue t, INode *inode, int type, int crossing, int flags, IPoint2 *p, ViewExp *vpt, ModContext *mc)
	This method is used in modifier gizmo hit testing. More...
CoreExport int	Display (TimeValue t, INode *inode, ViewExp *vpt, int flags)
	This is called by the system to have the item display itself (perform a quick render in viewport, using the current TM). More...
CoreExport void	Snap (TimeValue t, INode *inode, SnapInfo *snap, IPoint2 *p, ViewExp *vpt)
	Checks the point passed for a snap and updates the SnapInfo structure. More...
CoreExport CreateMouseCallBack *	GetCreateMouseCallBack ()
	This method allows the system to retrieve a callback object used in creating an object in the 3D viewports. More...
CoreExport RefTargetHandle	Clone (RemapDir &remap)
	This method is used by 3ds Max to clone an object. More...
CoreExport int	GetSubObjectLevel () override
	This method returns an integer which indicates the current sub-object level of the modifier or base object. More...
CoreExport int	Display (TimeValue t, INode *inode, ViewExp *vpt, int flags, ModContext *mc)
CoreExport void	GetWorldBoundBox (TimeValue t, INode *inode, ViewExp *vp, Box3 &box, ModContext *mc)
CoreExport int	NumSubObjTypes ()
	Objects and modifiers that support subobjects have to overwrite this method - as well as GetSubObjType() - and return a class derived from ISubObjType in GetSubObjType(). More...
CoreExport ISubObjType *	GetSubObjType (int i)
	Returns a pointer to the sub-object type for the sub-object whose index is passed. More...
CoreExport Interval	ObjectValidity (TimeValue t)
	This method returns the validity interval of the object as a whole at the specified time. More...
CoreExport BOOL	GetExtendedProperties (TimeValue t, MSTR &prop1Label, MSTR &prop1Data, MSTR &prop2Label, MSTR &prop2Data)
	This method allows an object to return extended Properties fields. More...
CoreExport BOOL	PolygonCount (TimeValue t, int &numFaces, int &numVerts)
	Retreives the number of faces and vertices of the polyginal mesh representation of this object. More...
CoreExport Interval	ChannelValidity (TimeValue t, int nchan)
	Retrieve the current validity interval for the nchan channel of the object. More...
CoreExport void	SetChannelValidity (int i, Interval v)
	Sets the validity interval of the specified channel. More...
CoreExport void	InvalidateChannels (ChannelMask channels)
	This method invalidates the intervals for the given channel mask. More...
CoreExport void	TopologyChanged ()
CoreExport Interval	ConvertValidity (TimeValue t)
virtual int	IsDeformable ()
	Indicates whether this object is deformable. More...
CoreExport int	NumPoints ()
	The points of a deformable object are accessed through a virtual array interface. More...
CoreExport Point3	GetPoint (int i)
	The points of a deformable object are accessed through a virtual array interface. More...
CoreExport void	SetPoint (int i, const Point3 &p)
	The points of a deformable object are accessed through a virtual array interface. More...
CoreExport BOOL	IsPointSelected (int i)
	Returns TRUE if the 'i-th' point is selected; otherwise FALSE. More...
CoreExport void	PointsWereChanged ()
	Informs the object that its points have been deformed, so it can invalidate its cache. More...
CoreExport void	GetDeformBBox (TimeValue t, Box3 &box, Matrix3 *tm=NULL, BOOL useSel=FALSE)
	This method computes the bounding box in the objects local coordinates or the optional space defined by tm. More...
CoreExport void	Deform (Deformer *defProc, int useSel)
	This is the method used to deform the object with a deformer. More...
virtual BOOL	IsParamSurface ()
	There are several methods used to access a parametric position on the surface of the object. More...
CoreExport Point3	GetSurfacePoint (TimeValue t, float u, float v, Interval &iv)
	This method needs to be implemented if Object::IsParamSurface() returns TRUE. More...
virtual int	IsMappable ()
	This method lets you know if the ApplyUVWMap() method is available for this object. More...
virtual int	NumMapChannels ()
	Returns the maximum number of channels supported by this type of object. More...
virtual int	NumMapsUsed ()
	Returns the number of maps currently used by this object. More...
virtual void	ApplyUVWMap (int type, float utile, float vtile, float wtile, int uflip, int vflip, int wflip, int cap, const Matrix3 &tm, int channel=1)
	This method may be called to map the object with UVW mapping coordinates. More...
CoreExport int	CanConvertToType (Class_ID obtype)
	Indicates whether the object can be converted to the specified type. More...
CoreExport Object *	ConvertToType (TimeValue t, Class_ID obtype)
	This method converts this object to the type specified and returns a pointer it. More...
CoreExport void	GetCollapseTypes (Tab< Class_ID > &clist, Tab< MSTR * > &nlist)
	When the user clicks on the Edit Stack button in the modify branch a list of 'Convert To:' types is presented. More...
CoreExport void	FreeChannels (ChannelMask chan)
	This method deletes the memory associated with the specified channels and set the intervals associated with the channels to invalid (empty). More...
CoreExport Object *	MakeShallowCopy (ChannelMask channels)
	This method must make a copy of its "shell" and then shallow copy (see below) only the specified channels. More...
CoreExport void	ShallowCopy (Object *fromOb, ChannelMask channels)
	This method copies the specified channels from the fromOb to this and copies the validity intervals. More...
CoreExport void	NewAndCopyChannels (ChannelMask channels)
	This method replaces the locked channels with newly allocated copies. More...
CoreExport DWORD	GetSubselState ()
	For objects that have sub selection levels, this method returns the current selection level of the object. More...
CoreExport int	IntersectRay (TimeValue t, Ray &ray, float &at, Point3 &norm)
	This method is called to compute the intersection point and surface normal at this intersection point of the ray passed and the object. More...
CoreExport void	GetWorldBoundBox (TimeValue t, INode *inode, ViewExp *vpt, Box3 &box)
	This method returns the world space bounding box for Objects (see below for the Sub-object gizmo or Modifiers gizmo version). More...
CoreExport void	GetLocalBoundBox (TimeValue t, INode *inode, ViewExp *vpt, Box3 &box)
	This is the object space bounding box, the box in the object's local coordinates. More...
CoreExport int	IsInstanceDependent ()
	If an object creates different meshes depending on the particular instance (view-dependent) it should return nonzero; otherwise 0. More...
CoreExport Mesh *	GetRenderMesh (TimeValue t, INode *inode, View &view, BOOL &needDelete)
	This method should be implemented by all renderable GeomObjects. More...
CoreExport PatchMesh &	GetPatchMesh (TimeValue t)
CoreExport Mesh &	GetMesh (TimeValue t)
virtual CoreExport void	DeleteThis ()
	Deletes an instance of this class. More...
virtual void	FreeCaches ()
virtual Class_ID	ClassID ()
	Retrieves a constant that uniquely identifies the plugin class. More...
CoreExport BOOL	IsSubClassOf (Class_ID classID)
	returns true if the animatable has sub-classed off the given class More...
virtual CoreExport void	GetClassName (MSTR &s)
	Retrieves the (localizable) name of the plugin class. More...
CoreExport void *	GetInterface (ULONG id)
	Inherited from Animatable. More...
virtual CoreExport const MCHAR *	GetObjectName ()
int	NumSubs ()
CoreExport Animatable *	SubAnim (int i)
CoreExport MSTR	SubAnimName (int i)
CoreExport BOOL	AssignController (Animatable *control, int subAnim)
int	SubNumToRefNum (int subNum)
CoreExport BOOL	SelectSubAnim (int subNum)
CoreExport BOOL	HasControllers (BOOL assertCheck=TRUE)
CoreExport void	RescaleWorldUnits (float f)
	Rescale size of all world units in reference hierarchy. More...
int	NumRefs ()
	Returns the total number of references this ReferenceMaker can hold. More...
CoreExport RefTargetHandle	GetReference (int i)
	Returns the 'i-th' reference. More...
CoreExport int	RemapRefOnLoad (int iref)
	Used to load old files with references. More...
CoreExport void	PlugControllersSel (TimeValue t)
CoreExport void	AllocVertContArray (int count)
CoreExport void	AllocVecContArray (int count)
CoreExport void	AllocContArrays (int vertCount, int vecCount)
CoreExport void	ReplaceVertContArray (Tab< Control * > &nc)
CoreExport void	ReplaceVecContArray (Tab< Control * > &nc)
CoreExport void	ReplaceContArrays (Tab< Control * > &vertnc, Tab< Control * > &vecnc)
CoreExport BOOL	PlugVertControl (TimeValue t, int i)
CoreExport BOOL	PlugVecControl (TimeValue t, int i)
CoreExport void	SetVertAnim (TimeValue t, int point, Point3 pt)
CoreExport void	SetVecAnim (TimeValue t, int point, Point3 pt)
CoreExport void	SetVertCont (int i, Control *c)
CoreExport void	SetVecCont (int i, Control *c)
CoreExport IOResult	Save (ISave *isave)
	Called for saving data. More...
CoreExport IOResult	Load (ILoad *iload)
	Called for loading data. More...
virtual CoreExport void	UpdatePatchMesh (TimeValue t)
CoreExport void	PrepareMesh (TimeValue t)
CoreExport Mesh &	GetUnrelaxedMesh (TimeValue t)
CoreExport BOOL	ShowLattice ()
CoreExport BOOL	ShowVerts ()
CoreExport void	SetShowLattice (BOOL sw)
CoreExport void	SetShowVerts (BOOL sw)
CoreExport void	SetMeshSteps (int steps)
CoreExport int	GetMeshSteps ()
CoreExport void	SetMeshStepsRender (int steps)
CoreExport int	GetMeshStepsRender ()
CoreExport BOOL	Relaxing ()
CoreExport void	SetRelax (BOOL v)
CoreExport void	SetRelaxViewports (BOOL v)
CoreExport void	SetRelaxValue (float v)
CoreExport void	SetRelaxIter (int v)
CoreExport void	SetRelaxBoundary (BOOL v)
CoreExport void	SetRelaxSaddle (BOOL v)
BOOL	GetRelax ()
BOOL	GetRelaxViewports ()
float	GetRelaxValue ()
int	GetRelaxIter ()
BOOL	GetRelaxBoundary ()
BOOL	GetRelaxSaddle ()
CoreExport void	SetShowInterior (BOOL si)
CoreExport BOOL	GetShowInterior ()
CoreExport void	SetUsePatchNormals (BOOL usePatchNorm)
CoreExport BOOL	GetUsePatchNormals ()
CoreExport void	SetAdaptive (BOOL sw)
CoreExport BOOL	GetAdaptive ()
CoreExport void	SetViewTess (TessApprox tess)
CoreExport TessApprox	GetViewTess ()
CoreExport void	SetProdTess (TessApprox tess)
CoreExport TessApprox	GetProdTess ()
CoreExport void	SetDispTess (TessApprox tess)
CoreExport TessApprox	GetDispTess ()
CoreExport BOOL	GetViewTessNormals ()
CoreExport void	SetViewTessNormals (BOOL use)
CoreExport BOOL	GetProdTessNormals ()
CoreExport void	SetProdTessNormals (BOOL use)
CoreExport BOOL	GetViewTessWeld ()
CoreExport void	SetViewTessWeld (BOOL weld)
CoreExport BOOL	GetProdTessWeld ()
CoreExport void	SetProdTessWeld (BOOL weld)
CoreExport void	InvalidateMesh ()
CoreExport void	InvalidateRelaxedMesh ()
virtual CoreExport void	BeginEditParams (IObjParam *objParam, ULONG flags, Animatable *prev)
virtual CoreExport void	EndEditParams (IObjParam *objParam, ULONG flags, Animatable *next)
CoreExport int	GetSubobjectLevel ()
CoreExport int	GetSubobjectType ()
CoreExport void	SetSubobjectLevel (int level)
CoreExport void	ActivateSubobjSel (int level, XFormModes &modes)
	When the user changes the selection of the sub-object drop down, this method is called to notify the plug-in. More...
CoreExport int	SubObjectIndex (HitRecord *hitRec)
	Returns the index of the sub-object element identified by the HitRecord hitRec. More...
CoreExport void	GetSubObjectTMs (SubObjAxisCallback *cb, TimeValue t, INode *node, ModContext *mc)
	When the user is in a sub-object selection level, the system needs to get the reference coordinate system definition from the current modifier being edited so that it can display the axis. More...
CoreExport void	ShowEndResultChanged (BOOL showEndResult)
CoreExport void	GetSubObjectCenters (SubObjAxisCallback *cb, TimeValue t, INode *node, ModContext *mc)
	When the user is in a sub-object selection level, the system needs to get the reference coordinate system definition from the current modifier being edited so that it can display the axis. More...
CoreExport void	SelectSubComponent (HitRecord *hitRec, BOOL selected, BOOL all, BOOL invert)
	This method is called to change the selection state of the component identified by hitRec. More...
CoreExport void	ClearSelection (int selLevel)
	This method is called to clear the selection for the given sub-object level. More...
CoreExport void	SelectAll (int selLevel)
	This method is called to select every element of the given sub-object level. More...
CoreExport void	InvertSelection (int selLevel)
	This method is called to invert the specified sub-object level. More...
CoreExport void	PatchSelChanged ()
CoreExport void	InvalidateSurfaceUI ()
CoreExport void	InvalidateOpsUI ()
CoreExport void	ChangeRememberedPatch (int type)
CoreExport void	ChangeSelPatches (int type)
CoreExport int	RememberPatchThere (HWND hWnd, IPoint2 m)
CoreExport void	SetRememberedPatchType (int type)
CoreExport void	ChangeRememberedVert (int type)
CoreExport void	ChangeSelVerts (int type)
CoreExport int	RememberVertThere (HWND hWnd, IPoint2 m)
CoreExport void	SetRememberedVertType (int type)
CoreExport void	XFormVerts (POXFormProc *xproc, TimeValue t, Matrix3 &partm, Matrix3 &tmAxis)
CoreExport void	XFormHandles (POXFormProc *xproc, TimeValue t, Matrix3 &partm, Matrix3 &tmAxis, int handleIndex)
CoreExport void	Move (TimeValue t, Matrix3 &partm, Matrix3 &tmAxis, Point3 &val, BOOL localOrigin=FALSE)
	When this method is called the plug-in should respond by moving its selected sub-object components. More...
CoreExport void	Rotate (TimeValue t, Matrix3 &partm, Matrix3 &tmAxis, Quat &val, BOOL localOrigin=FALSE)
	When this method is called the plug-in should respond by rotating its selected sub-object components. More...
CoreExport void	Scale (TimeValue t, Matrix3 &partm, Matrix3 &tmAxis, Point3 &val, BOOL localOrigin=FALSE)
	When this method is called the plug-in should respond by scaling its selected sub-object components. More...
CoreExport void	TransformStart (TimeValue t)
	This method is called before the first Move(), Rotate() or Scale() call and before a hold is in effect. More...
CoreExport void	TransformFinish (TimeValue t)
	This method is called after the user has completed the Move(), Rotate() or Scale() operation and the undo object has been accepted. More...
CoreExport void	TransformCancel (TimeValue t)
	This method is called when the transform operation is canceled by a right-click and the undo has been canceled. More...
CoreExport ObjectState	Eval (TimeValue t)
	This method is called to evaluate the object and return the result as an ObjectState. More...
BOOL	SupportsNamedSubSels ()
	An object that supports sub-object selection can choose to support named sub object selection sets. More...
CoreExport void	ActivateSubSelSet (MSTR &setName)
	When the user chooses a name from the drop down list this method is called. More...
CoreExport void	NewSetFromCurSel (MSTR &setName)
	If the user types a new name into the named selection set drop down then this method is called. More...
CoreExport void	RemoveSubSelSet (MSTR &setName)
	If the user selects a set from the drop down and then chooses Remove Named Selections from the Edit menu this method is called. More...
CoreExport void	SetupNamedSelDropDown ()
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
CoreExport int	NumNamedSelSets ()
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
CoreExport MSTR	GetNamedSelSetName (int i)
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
CoreExport void	SetNamedSelSetName (int i, MSTR &newName)
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
CoreExport void	NewSetByOperator (MSTR &newName, Tab< int > &sets, int op)
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
CoreExport BOOL	GetUniqueSetName (MSTR &name)
CoreExport int	SelectNamedSet ()
CoreExport void	NSCopy ()
CoreExport void	NSPaste ()
CoreExport GenericNamedSelSetList &	GetSelSet ()
CoreExport void	RefreshSelType ()
CoreExport void	SetNumSelLabel ()
CoreExport void	SetSelDlgEnables ()
CoreExport void	SetOpsDlgEnables ()
CoreExport void	SetSurfDlgEnables ()
CoreExport void	SetSoftSelDlgEnables (HWND hSoftSel=NULL)
CoreExport int	GetAttachMat ()
CoreExport void	SetAttachMat (int value)
CoreExport BOOL	GetCondenseMat ()
CoreExport void	SetCondenseMat (BOOL sw)
CoreExport void	DoAttach (INode *node, PatchMesh *attPatch, bool &canUndo)
CoreExport void	SetTessUI (HWND hDlg, TessApprox *tess)
CoreExport void	DoDeleteSelected (BOOL interactive=TRUE)
CoreExport void	DoBreak (BOOL interactive=TRUE)
CoreExport void	ResolveTopoChanges ()
CoreExport void	DeletePatchParts (BitArray &delVerts, BitArray &delPatches)
CoreExport void	CreateContArrays ()
CoreExport void	SynchContArrays ()
CoreExport int	GetSelMatIndex ()
CoreExport void	SetSelMatIndex (int index)
CoreExport void	SelectByMat (int index, BOOL clear)
CoreExport DWORD	GetSelSmoothBits (DWORD &invalid)
CoreExport DWORD	GetUsedSmoothBits ()
CoreExport void	SelectBySmoothGroup (DWORD bits, BOOL clear)
CoreExport void	SetSelSmoothBits (DWORD bits, DWORD which)
CoreExport void	SetPropagate (BOOL sw)
CoreExport BOOL	GetPropagate ()
CoreExport void	DoPatchAdd (int type)
CoreExport void	DoSubdivide (int level)
CoreExport void	DoPatchDetach (int copy, int reorient)
CoreExport void	DoVertWeld ()
CoreExport void	DoVertWeld (int fromVert, int toVert)
CoreExport void	DoEdgeWeld ()
CoreExport void	StartCopyTangentMode ()
CoreExport void	StartPasteTangentMode ()
CoreExport void	StartPasteTangent ()
CoreExport void	EndPasteTangent ()
CoreExport BOOL	CopyTangent (int vec)
CoreExport BOOL	PasteTangent (int vec)
CoreExport void	DoHide (int type)
CoreExport void	DoUnHide ()
CoreExport void	DoPatchHide ()
CoreExport void	DoVertHide ()
CoreExport void	DoEdgeHide ()
CoreExport void	DoAddHook (int vert1, int seg1)
CoreExport void	DoRemoveHook ()
CoreExport void	DoExtrude (TimeValue t)
CoreExport void	BeginExtrude (TimeValue t)
CoreExport void	EndExtrude (TimeValue t, BOOL accept=TRUE)
CoreExport void	Extrude (TimeValue t, float amount, BOOL useLocalNorm)
CoreExport void	DoFlipNormals (int patchIndex=-1)
CoreExport void	DoUnifyNormals ()
CoreExport void	DoBevel (TimeValue t)
CoreExport void	BeginBevel (TimeValue t)
CoreExport void	EndBevel (TimeValue t, BOOL accept=TRUE)
CoreExport void	Bevel (TimeValue t, float amount, BOOL smoothStart, BOOL smoothEnd)
CoreExport void	DoPatchSmooth (int type)
CoreExport void	CreateVertex (Point3 pt, int &newIndex)
CoreExport void	CreatePatch (int vertIndx1, int vertIndx2, int vertIndx3)
CoreExport void	CreatePatch (int vertIndx1, int vertIndx2, int vertIndx3, int vertIndx4)
CoreExport void	StartCommandMode (patchCommandMode mode)
CoreExport void	ButtonOp (patchButtonOp opcode)
CoreExport void	GetUIParam (patchUIParam uiCode, int &ret)
CoreExport void	SetUIParam (patchUIParam uiCode, int val)
CoreExport void	GetUIParam (patchUIParam uiCode, float &ret)
CoreExport void	SetUIParam (patchUIParam uiCode, float val)
bool	Editing ()
CoreExport DWORD	GetSelLevel ()
CoreExport void	SetSelLevel (DWORD level)
CoreExport void	LocalDataChanged ()
CoreExport BitArray	GetVecSel ()
CoreExport BitArray	GetVertSel ()
CoreExport BitArray	GetEdgeSel ()
CoreExport BitArray	GetPatchSel ()
CoreExport void	SetVecSel (BitArray &set, IPatchSelect *imod, TimeValue t)
CoreExport void	SetVertSel (BitArray &set, IPatchSelect *imod, TimeValue t)
CoreExport void	SetEdgeSel (BitArray &set, IPatchSelect *imod, TimeValue t)
CoreExport void	SetPatchSel (BitArray &set, IPatchSelect *imod, TimeValue t)
CoreExport GenericNamedSelSetList &	GetNamedVecSelList ()
CoreExport GenericNamedSelSetList &	GetNamedVertSelList ()
CoreExport GenericNamedSelSetList &	GetNamedEdgeSelList ()
CoreExport GenericNamedSelSetList &	GetNamedPatchSelList ()
CoreExport Color	GetVertColor (int mp=0, bool *differs=NULL)
CoreExport void	SetVertColor (Color clr, int mp=0)
CoreExport void	SelectVertByColor (VertColor clr, int deltaR, int deltaG, int deltaB, BOOL add, BOOL sub, int mp=0)
CoreExport Color	GetPatchColor (int mp=0, bool *differs=NULL)
CoreExport void	SetPatchColor (Color clr, int mp=0)
CoreExport MtlID	GetNextAvailMtlID (ModContext *mc)
CoreExport BOOL	HasFaceSelection (ModContext *mc)
CoreExport void	SetSelFaceMtlID (ModContext *mc, MtlID id, BOOL bResetUnsel=FALSE)
CoreExport int	GetSelFaceUniqueMtlID (ModContext *mc)
CoreExport int	GetSelFaceAnyMtlID (ModContext *mc)
CoreExport int	GetMaxMtlID (ModContext *mc)
CoreExport void	ChangeMappingTypeLinear (BOOL linear)
CoreExport void	ShrinkSelection (int type)
CoreExport void	GrowSelection (int type)
CoreExport void	SelectEdgeRing ()
CoreExport void	SelectEdgeLoop ()
CoreExport void	SelectOpenEdges ()
CoreExport void	DoCreateShape ()
CoreExport int	UseEdgeDists ()
CoreExport void	SetUseEdgeDists (int useSoftSelections)
CoreExport int	UseSoftSelections ()
CoreExport void	SetUseSoftSelections (int useSoftSelections)
CoreExport void	InvalidateVertexWeights ()
CoreExport void	ToggleShadedFaces ()
CoreExport void	UpdateVertexDists ()
CoreExport void	UpdateEdgeDists ()
CoreExport void	UpdateVertexWeights ()
CoreExport Point3	VertexNormal (int vIndex)
Public Member Functions inherited from GeomObject
virtual void	InitNodeName (MSTR &s)
	This is the default name of the node when it is created. More...
SClass_ID	SuperClassID ()
	Retrieves a constant representing the type of the plugin. More...
virtual int	IsRenderable ()
	Indicates whether the object may be rendered. More...
virtual int	NumberOfRenderMeshes ()
	Objects may supply multiple render meshes ( e.g. More...
virtual Mesh *	GetMultipleRenderMesh (TimeValue t, INode *inode, View &view, BOOL &needDelete, int meshNumber)
	For multiple render meshes, this method must be implemented. More...
virtual void	GetMultipleRenderMeshTM (TimeValue t, INode *inode, View &view, int meshNumber, Matrix3 &meshTM, Interval &meshTMValid)
	For multiple render meshes, this method must be implemented. More...
virtual CoreExport PatchMesh *	GetRenderPatchMesh (TimeValue t, INode *inode, View &view, BOOL &needDelete)
	This method provides a patch mesh representation of the object for use by the renderer. More...
CoreExport Class_ID	PreferredCollapseType ()
	This method allows objects to specify the class that is the best class to convert to when the user collapses the stack. More...
virtual BOOL	CanDoDisplacementMapping ()
	Returns TRUE if this object can do displacement mapping; otherwise FALSE. More...
Public Member Functions inherited from Object
CoreExport	Object ()
CoreExport	~Object ()
virtual int	UsesWireColor ()
	This method determines if the object color is used for display. More...
virtual int	DoOwnSelectHilite ()
	If an object wants to draw itself in the 3D viewports in its selected state in some custom manner this method should return nonzero. More...
virtual BOOL	NormalAlignVector (TimeValue t, Point3 &pt, Point3 &norm)
	Objects that don't support the IntersectRay() method (such as helper objects) can implement this method to provide a default vector for use with the normal align command in 3ds Max. More...
void	LockObject ()
	Implemented by the System. More...
void	UnlockObject ()
	Implemented by the System. More...
int	IsObjectLocked ()
	Implemented by the System. More...
void	LockChannels (ChannelMask channels)
	Implemented by the System. More...
void	UnlockChannels (ChannelMask channels)
	Implemented by the System. More...
ChannelMask	GetChannelLocks ()
	Implemented by the System. More...
void	SetChannelLocks (ChannelMask channels)
	Implemented by the System. More...
ChannelMask	GetChannelLocks (ChannelMask m)
	Implemented by the System. More...
virtual BOOL	CanCacheObject ()
	This method determines if this object can have channels cached. More...
virtual void	WSStateInvalidate ()
	This is called by a node when the node's world space state has become invalid. More...
virtual BOOL	IsWorldSpaceObject ()
	Returns TRUE if the object as a world space object; otherwise FALSE. More...
CoreExport INode *	GetWorldSpaceObjectNode ()
virtual BOOL	IsParticleSystem ()
CoreExport void	CopyChannelLocks (Object *obj, ChannelMask needChannels)
	Implemented by the System. More...
virtual float	PointSelection (int i)
	Returns a floating point weighted point selection if the object supports it. More...
virtual BOOL	HasWeights ()
	Returns TRUE if the object has weights for its points that can be set; otherwise FALSE. More...
virtual double	GetWeight (int i)
	Returns the weight of the specified point of the object. More...
virtual void	SetWeight (int i, const double w)
	Sets the weight of the specified point. More...
virtual Object *	CollapseObject ()
	This method is called on the world space cache object when the stack gets collapsed, that lets the pipeline object decide, if it wants to return a different object than itself. More...
virtual void	SetSubSelState (DWORD s)
CoreExport void	ReadyChannelsForMod (ChannelMask channels)
	Implemented by the System. More...
virtual CoreExport void	MaybeEnlargeViewportRect (GraphicsWindow *gw, Rect &rect)
	This method allows the object to enlarge its viewport rectangle, if it wants to. More...
CoreExport bool	IsBaseClassOwnedChannel (int nchan)
CoreExport void	UpdateValidity (int nchan, Interval v)
	When a modifier is applied to an object, it needs to include its own validity interval in the interval of the object. More...
Interval	GetNoEvalInterval ()
void	SetNoEvalInterval (Interval iv)
virtual CoreExport void	ReduceCaches (TimeValue t)
	This method give the object the chance to reduce its caches. More...
virtual int	IsConstObject ()
	This is called to determine if this is a construction object or not. More...
virtual int	NumPipeBranches (bool selected=true)
	This method returns the number of pipeline branches combined by the object. More...
virtual Object *	GetPipeBranch (int i, bool selected=true)
	Retrieves sub-object branches from an object that supports branching. More...
virtual INode *	GetBranchINode (TimeValue t, INode *node, int i, bool selected=true)
	When an object has sub-object branches, it is likely that the sub-objects are transformed relative to the object. More...
virtual int	NumberOfContainedShapes ()
	Returns the number of shapes contained inside this object. More...
virtual ShapeObject *	GetContainedShape (TimeValue t, int index)
	This method returns the ShapeObject specified by the index passed at the time specified. More...
virtual void	GetContainedShapeMatrix (TimeValue t, int index, Matrix3 &mat)
	Returns the matrix associated with the shape whose index is passed. More...
virtual BitArray	ContainedShapeSelectionArray ()
	This is used by the lofter. More...
virtual BOOL	IsShapeObject ()
virtual BOOL	CheckObjectIntegrity ()
	This method is used for debugging only. More...
virtual BOOL	HasUVW ()
	Call this method to find out if the object has UVW coordinates. More...
virtual BOOL	HasUVW (int mapChannel)
	Call this method to find out if the object is has UVW coordinates for the specified mapping channel. More...
virtual Object *	FindBaseObject ()
	It is called to return a pointer to the base object (an object that is not a derived object). More...
virtual int	NumSurfaces (TimeValue t)
	Returns the number of parametric surfaces within the object. More...
virtual Point3	GetSurfacePoint (TimeValue t, int surface, float u, float v, Interval &iv)
	This method is used to retrieve a point on the specified surface of the object based on two parameters of the surface, u and v. More...
virtual void	SurfaceClosed (TimeValue t, int surface, BOOL &uClosed, BOOL &vClosed)
	This method allows the object to return flags that indicate whether the parametric surface is closed in the U and V dimensions. More...
CoreExport SvGraphNodeReference	SvTraverseAnimGraph (IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
CoreExport bool	SvHandleDoubleClick (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport MSTR	SvGetName (IGraphObjectManager *gom, IGraphNode *gNode, bool isBeingEdited)
CoreExport COLORREF	SvHighlightColor (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport bool	SvIsSelected (IGraphObjectManager *gom, IGraphNode *gNode)
	Returns true if the object is selected in its schematic view. More...
CoreExport MultiSelectCallback *	SvGetMultiSelectCallback (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport bool	SvCanSelect (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport void	AddXTCObject (XTCObject *pObj, int priority=0, int branchID=-1)
	This method adds an extension object into the pipeline. More...
CoreExport int	NumXTCObjects ()
	Returns the number of extension objects maintained by this Object. More...
CoreExport XTCObject *	GetXTCObject (int index)
	Returns a pointer to the specified extension object. More...
CoreExport void	RemoveXTCObject (int index)
	Removes the extension object as indicated by the index. More...
CoreExport void	SetXTCObjectPriority (int index, int priority)
	Sets the priority for the extension object whose index is passed. More...
CoreExport int	GetXTCObjectPriority (int index)
	Returns the integer priority number of the extension object whose index is passed. More...
CoreExport void	SetXTCObjectBranchID (int index, int branchID)
	Sets the branch ID of the extension object whose index is passed. More...
CoreExport int	GetXTCObjectBranchID (int index)
	Returns the integer branch ID of the extension object whose index is passed. More...
CoreExport void	MergeAdditionalChannels (Object *from, int branchID)
	This method has to be called whenever the CompoundObject updates a branch (calling Eval() on it). More...
CoreExport void	BranchDeleted (int branchID, bool reorderChannels)
	This method has to be called on the CompoundObject so it can delete the XTCObjects for the specified branch. More...
CoreExport void	CopyAdditionalChannels (Object *from, bool deleteOld=true, bool bShallowCopy=false)
	This method copies all extension objects from the "from" object into the current object. More...
CoreExport void	DeleteAllAdditionalChannels ()
	Implemented by the System. More...
virtual BOOL	UseSelectionBrackets ()
	This method allows an object to choose whether or not it will display selection brackets in shaded viewports. More...
virtual BOOL	IsManipulator ()
CoreExport BaseInterface *	GetInterface (Interface_ID id)
	Inherited from Animatable. More...
virtual void	ReduceDisplayCaches ()
	Should reduce any derived display data to save memory, since the node wont be drawn until the user undhides it. More...
virtual bool	NeedGWCacheRebuilt (GraphicsWindow *gw, Material *ma, int numMat)
	This returns whether the Graphics Cache for this object needs to be rebuilt. More...
virtual void	BuildGWCache (GraphicsWindow *gw, Material *ma, int numMat, BOOL threaded)
	This builds the graphics window cached mesh. More...
virtual void	StartStackEval ()
	This are called right before and after a modifier is applied to an object. More...
virtual void	EndStackEval ()
Public Member Functions inherited from BaseObject
virtual CoreExport bool	UpdatePerViewItems (const MaxSDK::Graphics::UpdateDisplayContext &updateDisplayContext, MaxSDK::Graphics::UpdateNodeContext &nodeContext, MaxSDK::Graphics::UpdateViewContext &viewContext, MaxSDK::Graphics::IRenderItemContainer &targetRenderItemContainer)
virtual CoreExport const MaxSDK::Graphics::RenderItemHandleArray &	GetRenderItems () const
CoreExport	BaseObject ()
virtual CoreExport	~BaseObject ()
virtual BOOL	HasViewDependentBoundingBox ()
	This method return true if GetWorldBoundBox returns different boxes for different viewports. More...
virtual void	SetExtendedDisplay (int flags)
	This method is used for storing mode-dependent display attributes. More...
virtual CoreExport BOOL	OKToChangeTopology (MSTR &modName)
	Implemented by the System. More...
virtual BOOL	ChangeTopology ()
	This method asks the question of an object or modifier "Do you change topology"? An object or modifier returns TRUE if it is capable of changing topology when its parameters are being edited; otherwise FALSE. More...
virtual void	ForceNotify (Interval &i)
	Notifies dependents of a change. More...
virtual IParamArray *	GetParamBlock ()
	An object or modifier should implement this method if it wishes to make its parameter block available for other plug-ins to access it. More...
virtual IParamBlock2 *	GetParamBlock (int i) override
virtual int	GetParamBlockIndex (int id)
	If a plug-in makes its parameter block available (using GetParamBlock()) then it will need to provide #defines for indices into the parameter block. More...
virtual void	TransformHoldingStart (TimeValue t)
	This method is called before the first Move(), Rotate() or Scale() call and after a hold is in effect. More...
virtual void	TransformHoldingFinish (TimeValue t)
	This method is called after the user has completed the Move(), Rotate() or Scale() operation and before the undo object has been accepted. More...
virtual void	CloneSelSubComponents (TimeValue t)
	This method is called to make a copy of the selected sub-object components of the item. More...
virtual void	AcceptCloneSelSubComponents (TimeValue t)
	This method is called when the user mouses up after shift-cloning a sub-object selection. More...
virtual void	NotifyPreCollapse (INode *node, IDerivedObject *derObj, int index)
	This method is called before a modifier or object is collapsed. More...
virtual void	NotifyPostCollapse (INode *node, Object *obj, IDerivedObject *derObj, int index)
	This method is called after a modifier or object is collapsed. More...
virtual void	SetGenUVW (BOOL sw)
	This method is called to change the state of its Generate UVW boolean. More...
virtual void	SetGenUVW (int mapChannel, BOOL sw)
	This method is called to change the state of its Generate UVW boolean for the specified mapping channel. More...
Public Member Functions inherited from ReferenceTarget
virtual BOOL	IsRefTarget ()
	Checks if this is a ReferenceTarget. More...
CoreExport RefResult	TestForLoop (const Interval &refInterval, RefMakerHandle hmaker)
	Tests for a cyclical reference. More...
CoreExport BOOL	HasDependents ()
	Checks if a ReferenceTarget has references. More...
CoreExport BOOL	HasRealDependents ()
	Checks if this has Real (Strong) Dependents. More...
void	BeginDependencyTest ()
	Starts Dependency Test. More...
BOOL	EndDependencyTest ()
	Ends Dependency Test. More...
virtual void	RefAdded (RefMakerHandle rm)
	Called after a reference is made to a target. More...
virtual void	RefAddedUndoRedo (RefMakerHandle rm)
	Called after a reference is made to a target because of undo or redo. More...
virtual void	RefDeleted ()
	Called after a references to this is deleted. More...
virtual void	RefDeletedUndoRedo ()
	Called after a references to this is deleted because of undo or redo. More...
CoreExport RefResult	DeleteAllRefsToMe ()
	Deletes all references to this ReferenceTarget. More...
CoreExport RefResult	TransferReferences (RefTargetHandle oldTarget, BOOL delOld=FALSE)
	Transfers all the references from oldTarget to this. More...
CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...
virtual CoreExport void	BaseClone (ReferenceTarget *from, ReferenceTarget *to, RemapDir &remap)
	This method copies base class data from an object to its clone. More...
virtual CoreExport RefResult	NotifyDependents (const Interval &changeInt, PartID partID, RefMessage message, SClass_ID sclass=NOTIFY_ALL, BOOL propagate=TRUE, RefTargetHandle hTarg=NULL, NotifyDependentsOption notifyDependentsOption=REFNOTIFY_ALLOW_OPTIMIZATIONS)
	Notify all dependent RefMakers concerned with the message. More...
void	FlagDependents (TimeValue t, PartID which=PART_PUT_IN_FG)
	This sends the REFMSG_FLAGDEPENDENTS message up the pipeline. More...
virtual void	NotifyForeground (TimeValue t)
	This method is called to flag dependents into the FG. More...
virtual void	NotifyTarget (int message, ReferenceMaker *hMaker)
	Sends messages to ReferenceTargets. More...
CoreExport	ReferenceTarget ()
	Constructor. More...
virtual CoreExport RefResult	AutoDelete ()
	Deletes the object when it has no more real dependents. More...
CoreExport RefResult	MaybeAutoDelete ()
	Deletes the object when it has no more real dependents. More...
Public Member Functions inherited from ReferenceMaker
CoreExport RefResult	ReplaceReference (int which, RefTargetHandle newtarg, BOOL delOld=TRUE)
	Used when cloning reference makers. More...
CoreExport RefResult	DeleteAllRefsFromMe ()
	Deletes all references from this ReferenceMaker. More...
CoreExport RefResult	DeleteAllRefs ()
	Deletes all references both to and from this item. More...
CoreExport RefResult	DeleteReference (int i)
	Deletes the specified reference. More...
virtual BOOL	CanTransferReference (int i)
	Tells whether this reference can be transfered. More...
CoreExport ReferenceSaveManager &	GetReferenceSaveManager ()
	Access the ReferenceSaveManager of this ReferenceMaker. More...
virtual CoreExport void	EnumAuxFiles (AssetEnumCallback &assetEnum, DWORD flags)
	Enumerate auxiliary files (e.g. bitmaps) More...
virtual CoreExport void	SaveEnum (SaveEnumProc &sep, BOOL isNodeCall=0)
	The default save enumeration. More...
virtual CoreExport bool	SpecifySaveReferences (ReferenceSaveManager &referenceSaveManager)
	Used to specify reference slot remapping during scene file save. More...
CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...
CoreExport bool	EnumRefHierarchy (RefEnumProc &proc, bool includeCustAttribs=true, bool includeIndirectRefs=true, bool includeNonPersistentRefs=true, bool preventDuplicatesViaFlag=true)
	This method provides a general purpose reference enumerator. More...
CoreExport int	FindRef (RefTargetHandle rtarg)
	Get the index of the ReferenceTarget. More...
virtual BOOL	IsRefMaker ()
	Tells whether it is a ReferenceMaker. More...
virtual BOOL	IsRealDependency (ReferenceTarget *rtarg)
	Returns whether this is a "real" (strong) dependency or not. More...
virtual BOOL	ShouldPersistWeakRef (RefTargetHandle rtarg)
	Specifies whether a weak reference is to be persisted on a partial load or save. More...
CoreExport	ReferenceMaker ()
	Constructor. More...
CoreExport void	DeleteMe ()
	Deletes an instance of this class. More...
Public Member Functions inherited from Animatable
virtual int	NumChildren ()
virtual Animatable *	ChildAnim (int i)
virtual CoreExport MSTR	NodeName ()
virtual void	EditTrack ()
virtual CoreExport BOOL	SubAnimSetKeyBufferPresent (int subNum)
	returns true if the sub-anim has a "Set Key" buffer present More...
virtual BOOL	SetKeyBufferPresent ()
	returns true if there is a "Set Key" buffer present More...
virtual CoreExport void	SubAnimCommitSetKeyBuffer (TimeValue t, int subNum)
	Commit any "Set Key" buffers on the given sub-anim. More...
virtual void	CommitSetKeyBuffer (TimeValue t)
	Commit any "Set Key" buffers. More...
virtual CoreExport void	SubAnimRevertSetKeyBuffer (int subNum)
	Revert any "Set Key" buffers on the given sub-anim. More...
virtual void	RevertSetKeyBuffer ()
	Revert any "Set Key" buffers. More...
virtual LRESULT CALLBACK	TrackViewWinProc (HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam)
	This function is obsolete. More...
virtual bool	IsParamBlockDesc2Used (ParamBlockDesc2 *desc)
	Returns true if the passed description is being used. More...
virtual bool	GetMacroRecorderName (bool used_as_rhs_value, MSTR &objectSpecifiedName)
	This method is called to access the object specified name to use for the Maxscript macrorecorder. More...
CoreExport	Animatable ()
	Constructor. More...
MSTR	ClassName () const
	Returns the name of the plugin class. More...
virtual CoreExport void	ReleaseInterface (ULONG id, void *i)
virtual CoreExport int	SetProperty (ULONG id, void *data)
virtual CoreExport void *	GetProperty (ULONG id)
CoreExport void	AppendProperty (AnimProperty *prop)
	A function to directly add arbitrary properties to this object developers should ensure that the properties ID does not conflict with any Max-specific IDs. More...
CoreExport AnimProperty *	FindProperty (DWORD id)
	Find any property. More...
CoreExport void	AddAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid, DWORD len, void *data)
	Adds application/plugin specific (custom) data to an Animatable. More...
CoreExport AppDataChunk *	GetAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Retrieves the application/plugin specific (custom) data stored with an Animatable. More...
CoreExport BOOL	RemoveAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Deletes the application/plugin specific (custom) data stored with an Animatable. More...
CoreExport void	ClearAllAppData ()
	Deletes all application/plugin specific (custom) data stored with an Animatable. More...
virtual BOOL	CanDeleteSubAnim (int i)
virtual void	DeleteSubAnim (int i)
virtual DWORD	GetSubAnimCurveColor (int subNum)
virtual BOOL	CanCopyAnim ()
CoreExport int	HasSubElements (int type=0)
virtual int	GetSubFCurveExtents (int subNum, ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	The values max and min should be initialized before calling this function. More...
virtual ParamDimension *	GetParamDimension (int i)
virtual BOOL	BypassTreeView ()
virtual BOOL	BypassTrackBar ()
virtual BOOL	BypassPropertyLevel ()
virtual BOOL	InvisibleProperty ()
virtual int	NumKeys ()
virtual TimeValue	GetKeyTime (int index)
virtual int	GetKeyIndex (TimeValue t)
virtual BOOL	GetNextKeyTime (TimeValue t, DWORD flags, TimeValue &nt)
virtual void	CopyKeysFromTime (TimeValue src, TimeValue dst, DWORD flags)
virtual void	DeleteKeyAtTime (TimeValue t)
virtual BOOL	IsKeyAtTime (TimeValue t, DWORD flags)
virtual int	GetKeyTimes (Tab< TimeValue > &times, Interval range, DWORD flags)
virtual int	GetKeySelState (BitArray &sel, Interval range, DWORD flags)
CoreExport void	OpenTreeEntry (int type, DWORD tv)
CoreExport void	CloseTreeEntry (int type, DWORD tv)
CoreExport int	IsTreeEntryOpen (int type, DWORD tv)
CoreExport BOOL	GetSelInTrackView (DWORD tv)
CoreExport void	SetSelInTrackView (DWORD tv, BOOL sel)
CoreExport BOOL	InTrackViewSelSet (int which)
CoreExport void	SetTrackViewSelSet (int which, BOOL inOut)
virtual BOOL	CanAssignController (int subAnim)
	Return true if we can reassign the subanim specified. More...
virtual BOOL	CanMakeUnique ()
CoreExport int	EnumAnimTree (AnimEnum *animEnum, Animatable *client, int subNum)
virtual int	RenderBegin (TimeValue t, ULONG flags=0)
virtual int	RenderEnd (TimeValue t)
virtual CoreExport Interval	GetTimeRange (DWORD flags)
virtual void	EditTimeRange (Interval range, DWORD flags)
virtual void	DeleteTime (Interval iv, DWORD flags)
virtual void	ReverseTime (Interval iv, DWORD flags)
virtual void	ScaleTime (Interval iv, float s)
virtual void	InsertTime (TimeValue ins, TimeValue amount)
virtual BOOL	SupportTimeOperations ()
virtual CoreExport void	MapKeys (TimeMap *map, DWORD flags)
virtual void	DeleteKeys (DWORD flags)
virtual void	DeleteKeyByIndex (int index)
virtual void	SelectKeys (TrackHitTab &sel, DWORD flags)
virtual void	SelectSubKeys (int subNum, TrackHitTab &sel, DWORD flags)
virtual void	SelectSubCurve (int subNum, BOOL sel)
virtual void	SelectKeyByIndex (int i, BOOL sel)
virtual BOOL	IsKeySelected (int i)
virtual void	FlagKey (TrackHitRecord hit)
virtual int	GetFlagKeyIndex ()
virtual int	NumSelKeys ()
virtual void	CloneSelectedKeys (BOOL offset=FALSE)
virtual void	AddNewKey (TimeValue t, DWORD flags)
virtual void	MoveKeys (ParamDimensionBase *dim, float delta, DWORD flags)
virtual void	ScaleKeyValues (ParamDimensionBase *dim, float origin, float scale, DWORD flags)
virtual void	SelectCurve (BOOL sel)
virtual BOOL	IsCurveSelected ()
	Returns TRUE if the function curve is selected; otherwise returns FALSE. More...
virtual BOOL	IsSubCurveSelected (int subNum)
	Returns the selected state of the sub-curve whose index is passed. More...
virtual int	GetSelKeyCoords (TimeValue &t, float &val, DWORD flags)
virtual void	SetSelKeyCoords (TimeValue t, float val, DWORD flags)
virtual int	SetSelKeyCoordsExpr (ParamDimension *dim, const MCHAR *timeExpr, const MCHAR *valExpr, DWORD flags)
virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, int dx, int dy, DWORD flags)
virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, float angle, float length, DWORD flags)
virtual CoreExport BOOL	IsAnimated ()
virtual BOOL	CanCopyTrack (Interval iv, DWORD flags)
virtual BOOL	CanPasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)
virtual TrackClipObject *	CopyTrack (Interval iv, DWORD flags)
virtual void	PasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)
virtual BOOL	CanCopySubTrack (int subNum, Interval iv, DWORD flags)
virtual BOOL	CanPasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)
virtual TrackClipObject *	CopySubTrack (int subNum, Interval iv, DWORD flags)
virtual void	PasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)
virtual int	GetTrackVSpace (int lineHeight)
virtual int	HitTestTrack (TrackHitTab &hits, Rect &rcHit, Rect &rcTrack, float zoom, int scroll, DWORD flags)
virtual int	PaintTrack (ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)
virtual int	PaintSubTrack (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)
virtual int	PaintFCurves (ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	HitTestFCurves (ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	PaintSubFCurves (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	HitTestSubFCurves (int subNum, ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual void	EditTrackParams (TimeValue t, ParamDimensionBase *dim, const MCHAR *pname, HWND hParent, IObjParam *ip, DWORD flags)
virtual int	TrackParamsType ()
virtual int	GetFCurveExtents (ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	This method is called to calculate the largest and smallest values of the anim. More...
CoreExport void	AddNoteTrack (NoteTrack *note)
CoreExport void	DeleteNoteTrack (NoteTrack *note, BOOL delNote=TRUE)
CoreExport BOOL	HasNoteTracks ()
CoreExport int	NumNoteTracks ()
CoreExport NoteTrack *	GetNoteTrack (int i)
virtual void	FreeAllBitmaps ()
virtual void	GetSystemNodes (INodeTab &nodes, SysNodeContext Context)
virtual CoreExport void	MouseCycleCompleted (TimeValue t)
virtual CoreExport void	MouseCycleStarted (TimeValue t)
virtual int	NumParamBlocks ()
virtual IParamBlock2 *	GetParamBlockByID (short id)
CoreExport bool	SvSaveData (ISave *isave, USHORT id)
CoreExport bool	SvLoadData (ILoad *iLoad)
CoreExport DWORD	SvGetRefIndex ()
CoreExport void	SvSetRefIndex (DWORD i)
CoreExport bool	SvDeleteRefIndex ()
CoreExport SvGraphNodeReference	SvStdTraverseAnimGraph (IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
virtual CoreExport bool	SvCanInitiateLink (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvCanConcludeLink (IGraphObjectManager *gom, IGraphNode *gNode, IGraphNode *gNodeChild)
virtual CoreExport bool	SvCanSetName (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvSetName (IGraphObjectManager *gom, IGraphNode *gNode, const MSTR &name)
virtual CoreExport bool	SvCanRemoveThis (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvRemoveThis (IGraphObjectManager *gom, IGraphNode *gNode)
	Called when the user deletes this object in the schematic view... More...
virtual CoreExport bool	SvIsHighlighted (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport COLORREF	SvGetSwatchColor (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvIsInactive (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvLinkChild (IGraphObjectManager *gom, IGraphNode *gNodeThis, IGraphNode *gNodeChild)
virtual CoreExport bool	SvEditProperties (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetTip (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetRefTip (IGraphObjectManager *gom, IGraphNode *gNode, IGraphNode *gNodeMaker)
virtual CoreExport bool	SvCanDetach (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvDetach (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetRelTip (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns a string to be displayed in the tip window in the schematic view for a relationship from "gNodeMaker" to "gNodeTarget"... More...
virtual CoreExport bool	SvCanDetachRel (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns true if this object can respond to the SvDetachRel(...) method... More...
virtual CoreExport bool	SvDetachRel (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Detach this relationship. More...
virtual CoreExport bool	SvHandleRelDoubleClick (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Called when this relationship is double-clicked in the schematic view... More...
CoreExport ICustAttribContainer *	GetCustAttribContainer ()
	This method returns a pointer to the custom attributes container interface class. More...
CoreExport void	AllocCustAttribContainer ()
	This method allocates space for a custom attributes container. More...
CoreExport void	DeleteCustAttribContainer ()
	This method deletes space used by a custom attributes container. More...
void	SetAFlag (DWORD mask)
void	ClearAFlag (DWORD mask)
	Clears one or more bits in the Animatable flags. More...
bool	TestAFlag (DWORD mask) const
	Tests one or more bits in the Animatable flags. More...
void	SetAFlagEx (DWORD mask)
	Sets one or more bits in the Animatable extended flags. More...
void	ClearAFlagEx (DWORD mask)
	Clears one or more bits in the Animatable extended flags. More...
bool	TestAFlagEx (DWORD mask) const
	Tests one or more bits in the Animatable extended flags. More...
CoreExport bool	TestFlagBit (int index)
	Tests the specified flag bit. More...
CoreExport void	SetFlagBit (int index, bool newValue=true)
	Sets the specified flag bit. More...
CoreExport void	ClearFlagBit (int index)
	Clears the specified flag bit. More...
Public Member Functions inherited from InterfaceServer
virtual UtilExport	~InterfaceServer ()
	Destructor. More...

Public Attributes
int	loadRefVersion
Interval	geomValid
Interval	topoValid
Interval	texmapValid
Interval	selectValid
ChannelMask	validBits
PatchMesh	patch
int	patchSelSubType
MasterPointControl *	masterCont
Tab< Control * >	vertCont
Tab< Control * >	vecCont
PatchMesh *	rememberedPatch
int	rememberedIndex
int	rememberedData
BOOL	doingHandles
BOOL	showMesh
BOOL	propagate
BOOL	inExtrude
BOOL	inBevel
BOOL	inPatchCreate
DWORD	epFlags
BOOL	copyTanLength
BOOL	tangentCopied
Point3	copiedTangent
GenericNamedSelSetList	hselSet
GenericNamedSelSetList	vselSet
GenericNamedSelSetList	eselSet
GenericNamedSelSetList	pselSet
SingleRefMakerPatchNode *	noderef
SingleRefMakerPatchMtl *	mtlref

Static Public Attributes
static HWND	hSelectPanel
static HWND	hOpsPanel
static HWND	hSurfPanel
static HWND	hSoftSelPanel
static BOOL	rsSel
static BOOL	rsOps
static BOOL	rsSurf
static MoveModBoxCMode *	moveMode
static RotateModBoxCMode *	rotMode
static UScaleModBoxCMode *	uscaleMode
static NUScaleModBoxCMode *	nuscaleMode
static SquashModBoxCMode *	squashMode
static SelectModBoxCMode *	selectMode
static EP_BindCMode *	bindMode
static EP_ExtrudeCMode *	extrudeMode
static EP_NormalFlipCMode *	normalFlipMode
static EP_BevelCMode *	bevelMode
static EP_CreateVertCMode *	createVertMode
static EP_CreatePatchCMode *	createPatchMode
static EP_VertWeldCMode *	vertWeldMode
static EP_CopyTangentCMode *	copyTangentMode
static EP_PasteTangentCMode *	pasteTangentMode
static BOOL	settingViewportTess
static BOOL	settingDisp
static ISpinnerControl *	uSpin
static ISpinnerControl *	vSpin
static ISpinnerControl *	edgeSpin
static ISpinnerControl *	angSpin
static ISpinnerControl *	distSpin
static ISpinnerControl *	mergeSpin
static ISpinnerControl *	matSpin
static ISpinnerControl *	matSpinSel
static ISpinnerControl *	weldSpin
static ISpinnerControl *	targetWeldSpin
static ISpinnerControl *	stepsSpin
static ISpinnerControl *	stepsRenderSpin
static ISpinnerControl *	relaxSpin
static ISpinnerControl *	relaxIterSpin
static POPickPatchAttach	pickCB
static BOOL	patchUIValid
static BOOL	opsUIValid
static int	attachMat
static BOOL	condenseMat
static int	pickBoxSize
static int	weldBoxSize
static IObjParam *	ip
static PatchObject *	editObj
Static Public Attributes inherited from Animatable
static const AnimHandle	kInvalidAnimHandle = 0

Protected Member Functions
virtual CoreExport void	SetReference (int i, RefTargetHandle rtarg)
	Stores a ReferenceTarget as its 'i-th' reference`. More...
Protected Member Functions inherited from ReferenceTarget
virtual CoreExport int	DoEnumDependentsImpl (DependentEnumProc *dep)
	Method to perform an enumeration on a ReferenceTarget. More...
virtual CoreExport	~ReferenceTarget ()=0
	Destructor. More...
Protected Member Functions inherited from ReferenceMaker
virtual CoreExport	~ReferenceMaker ()=0
	Destructor. More...
void	BlockEval ()
void	UnblockEval ()
int	Evaluating ()
CoreExport RefResult	StdNotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID partID, RefMessage message, BOOL propagate, NotifyDependentsOption notifyDependentsOption)
Protected Member Functions inherited from Animatable
virtual CoreExport	~Animatable ()=0
	Destructor. More...
Protected Member Functions inherited from Noncopyable
	Noncopyable ()
	~Noncopyable ()

Friends
class	PatchObjectRestore
class	POXFormProc
class	POPickPatchAttach

Additional Inherited Members
Static Public Member Functions inherited from Animatable
static CoreExport BOOL	IsDeleted (Animatable *anim)
	Debug method to determine whether an object has been deleted. More...
static CoreExport AnimHandle	GetHandleByAnim (Animatable *anim)
	Get the unique handle for an Animatable object. More...
static CoreExport Animatable *	GetAnimByHandle (AnimHandle handle)
	Get an Animatable object from its unique handle. More...
static CoreExport void	EnumerateAllAnimatables (EnumAnimList &enumProcObject)
	Enumerator to enumerate across all animatables. More...
static CoreExport bool	RegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	UnRegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	RegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	UnRegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport int	RequestFlagBit ()
	Requests an unique flag bit index. More...
static CoreExport void	ReleaseFlagBit (int index)
	Releases the flag bit index. More...
static CoreExport void	ClearFlagBitInAllAnimatables (int index)
	Clears the specified flag bit in all Animatables. More...
Static Public Member Functions inherited from MaxHeapOperators
static UtilExport void *	operator new (size_t size)
	Standard new operator used to allocate objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e)
	Standard new operator used to allocate objects if there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate objects that takes the type of memory, filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate arrays of objects. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void	operator delete (void *ptr)
	Standard delete operator used to deallocate an object If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an object If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an object that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, void *placement_ptr)
	Placement new operator. More...
static UtilExport void	operator delete (void *ptr, void *placement_ptr)
	Placement delete operator. More...
static UtilExport void *	aligned_malloc (size_t size, size_t alignment)
	Allocates memory on a specified alignment boundary. More...
static UtilExport void *	aligned_realloc (void *ptr, size_t size, size_t alignment)
	Reallocates memory on a specified alignment boundary. More...
static UtilExport void	aligned_free (void *ptr)
	Frees a block of memory that was allocated with aligned_malloc/aligned_realloc. More...
Protected Attributes inherited from BaseObject
MaxSDK::Graphics::RenderItemHandleArray	mRenderItemHandles
Protected Attributes inherited from Animatable
DWORD	aflag
AnimPropertyList	aprops

Constructor & Destructor Documentation

CoreExport PatchObject

(

)

Remarks

Constructor.

CoreExport PatchObject

(

PatchObject &

from

)

CoreExport ~PatchObject

(

)

Remarks

Destructor.

Member Function Documentation

void CopyValidity	(	PatchObject *	fromOb,
		ChannelMask	channels
	)

RefResult NotifyRefChanged ( const Interval &  changeInt, RefTargetHandle  hTarget, PartID &  partID, RefMessage  message, BOOL  propagate  )

virtual

Receives and responds to messages.

A plugin which makes references must implement a method to receive and respond to messages broadcast by its dependents. This is done by implementing NotifyRefChanged(). The plugin developer usually implements this method as a switch statement where each case is one of the messages the plugin needs to respond to. The Method StdNotifyRefChanged calls this, which can change the partID to new value. If it doesn't depend on the particular message& partID, it should return REF_DONTCARE.

• For developer that need to update a dialog box with data about an object you reference note the following related to this method: This method may be called many times. For instance, say you have a dialog box that displays data about an object you reference. This method will get called many time during the drag operations on that object. If you updated the display every time you'd wind up with a lot of 'flicker' in the dialog box. Rather than updating the dialog box each time, you should just invalidate the window in response to the NotifyRefChanged() call. Then, as the user drags the mouse your window will still receive paint messages. If the scene is complex the user may have to pause (but not let up on the mouse) to allow the paint message to go through since they have a low priority. This is the way many windows in 3ds Max work.

Parameters

changeInt	- This is the interval of time over which the message is active. Currently, all plug-ins will receive FOREVER for this interval, with the exception of REFMSG_FLAGDEPENDENTS notifications. In that case, changeInt.Start() is the timepoint to perform the dependency test.
hTarget	- This is the handle of the reference target the message was sent by. The reference maker uses this handle to know specifically which reference target sent the message.
partID	- This contains information specific to the message passed in. Some messages don't use the partID at all. See the section List of Reference Messages for more information about the meaning of the partID for some common messages.
message	- The message parameters passed into this method is the specific message which needs to be handled.
propagate	- If called through ReferenceMaker::NotifyDependents(), the value of 'propagate' passed to it. Used if calling NotifyDependents() from within NotifyRefChanged().

Returns

The return value from this method is of type RefResult. This is usually REF_SUCCEED indicating the message was processed. Sometimes, the return value may be REF_STOP. This return value is used to stop the message from being propagated to the dependents of the item.

Implements ReferenceMaker.

CoreExport void PatchObjectInit

(

)

virtual CoreExport unsigned long GetObjectDisplayRequirement ( ) const

virtual

Reimplemented from BaseObject.

virtual CoreExport bool PrepareDisplay ( const MaxSDK::Graphics::UpdateDisplayContext &  prepareDisplayContext )

virtual

Reimplemented from BaseObject.

virtual CoreExport bool UpdatePerNodeItems ( const MaxSDK::Graphics::UpdateDisplayContext &  updateDisplayContext, MaxSDK::Graphics::UpdateNodeContext &  nodeContext, MaxSDK::Graphics::IRenderItemContainer &  targetRenderItemContainer  )

virtual

Reimplemented from BaseObject.

CoreExport PatchObject& operator=

(

PatchObject &

from

)

void SetFlag ( DWORD  fl, BOOL  val = TRUE  )

inline

Remarks

This method is available in release 4.0 and later only.

This method sets or clears the status of the Show End Result flag.

Parameters:

DWORD fl

The flag you wish to set or clear. Currently the only flag defined is the Show End Result flag EP_DISP_RESULT.

BOOL val

Specifies if the given flag should be set or cleared.

{ if (val) epFlags |= fl; else epFlags &= ~fl; }

void ClearFlag ( DWORD  fl )

inline

Remarks

This method is available in release 4.0 and later only.

This method clears the status of the Show End Result flag.

Parameters:

DWORD fl

The flag you wish to set or clear. Currently the only flag defined is the Show End Result flag EP_DISP_RESULT.

{ epFlags &= (~fl); }

bool GetFlag ( DWORD  fl )

inline

Remarks

This method is available in release 4.0 and later only.

This methods allows you to obtain the status of the Show End Result flag.

Parameters:

DWORD fl

The flag you wish to set or clear. Currently the only flag defined is the Show End Result flag EP_DISP_RESULT.

{ return (epFlags&fl) ? TRUE : FALSE; }

CoreExport int HitTest ( TimeValue  t, INode *  inode, int  type, int  crossing, int  flags, IPoint2 *  p, ViewExp *  vpt  )

virtual

This method is called to determine if the specified screen point intersects the item.

The method returns nonzero if the item was hit; otherwise 0.

Parameters

t	The time to perform the hit test.
inode	A pointer to the node to test.
type	The type of hit testing to perform. See Scene and Node Hit Test Types. for details.
crossing	The state of the crossing setting. If TRUE crossing selection is on.
flags	The hit test flags. See Scene and Node Hit Testing Flags for details.
p	The screen point to test.
vpt	An interface pointer that may be used to call methods associated with the viewports.

Returns

Nonzero if the item was hit; otherwise 0.

Reimplemented from BaseObject.

CoreExport int HitTest ( TimeValue  t, INode *  inode, int  type, int  crossing, int  flags, IPoint2 *  p, ViewExp *  vpt, ModContext *  mc  )

virtual

This method is used in modifier gizmo hit testing.

It is called to determine if the specified screen point intersects the gizmo. The method returns nonzero if the item was hit; otherwise 0.

Parameters

t	The time to perform the hit test.
inode	A pointer to the node to test.
type	The type of hit testing to perform. See Scene and Node Hit Test Types. for details.
crossing	The state of the crossing setting. If TRUE crossing selection is on.
flags	The hit test flags. See Scene and Node Hit Testing Flags for details.
p	The screen point to test.
vpt	An interface pointer that may be used to call methods associated with the viewports.
mc	A pointer to the modifiers ModContext.

Returns

Nonzero if the item was hit; otherwise 0.

Reimplemented from BaseObject.

CoreExport int Display ( TimeValue  t, INode *  inode, ViewExp *  vpt, int  flags  )

virtual

This is called by the system to have the item display itself (perform a quick render in viewport, using the current TM).

Note: For this method to be called the object's validity interval must be invalid at the specified time t. If the interval is valid, the system may not call this method since it thinks the display is already valid.

Parameters

t	The time to display the object.
inode	The node to display.
vpt	An interface pointer that may be used to call methods associated with the viewports.
flags	See Display Flags.

Returns

Default return value is -1, means this object doesn't have display function. 0 means it didn't draw anything in current frame. Otherwise return positive values..

Reimplemented from BaseObject.

CoreExport void Snap ( TimeValue  t, INode *  inode, SnapInfo *  snap, IPoint2 *  p, ViewExp *  vpt  )

virtual

Checks the point passed for a snap and updates the SnapInfo structure.

Note

Developers wanting to find snap points on an Editable Mesh object should see the method XmeshSnap::Snap() in /MAXSDK/SAMPLES/SNAPS/XMESH/XMESH.CPP.

Parameters

t	The time to check.
inode	The node to check.
snap	The snap info structure to update.
p	The screen point to check.
vpt	An interface pointer that may be used to call methods associated with the viewports.

Reimplemented from BaseObject.

CoreExport CreateMouseCallBack* GetCreateMouseCallBack ( )

virtual

This method allows the system to retrieve a callback object used in creating an object in the 3D viewports.

This method returns a pointer to an instance of a class derived from CreateMouseCallBack. This class has a method proc() which is where the programmer defines the user/mouse interaction during the object creation phase.

Returns

A pointer to an instance of a class derived from CreateMouseCallBack.

Implements BaseObject.

CoreExport RefTargetHandle Clone ( RemapDir &  remap )

virtual

This method is used by 3ds Max to clone an object.

See also

CloneRefHierarchy(), class RemapDir This method is called by 3ds Max to have the plugin clone itself. The plug-in's implementation of this method should copy both the data structure and all the data residing in the data structure of this reference target. The plugin should clone all its references as well. Also, the plug-in's implementation of this method must call BaseClone(). In order for classes derived from this class to clone cleanly, the Clone method should just create the new instance, and then call an implementation of BaseClone that clones the references and copies any other necessary data. For example:

class MyDerivedPlugin
    : public MyBasePlugin
{
    const int MY_REFERENCE = 1;

    ReferenceTarget* Clone(RemapDir& remap)
    {
        ReferenceTarget* result = new MyDerivedPlugin();
        BaseClone(this, result, remap);
        return result;
    }

    void BaseClone(ReferenceTarget* from, ReferenceTarget* to, RemapDir& remap)
    {
        if (!to || !from || from == to)
            return;    
        MyBasePlugin::BaseClone(from, to, remap);
        to->ReplaceReference(MY_REFERENCE, remap->CloneRef(from->GetReference(MY_REFERENCE)));
    }
};

This method should not be directly called by plug-ins. Instead, either RemapDir::CloneRef() or CloneRefHierachy() should be used to perform cloning. These methods ensure that the mapping from the original object to the clone is added to the RemapDir used for cloning, which may be used during backpatch operations

Note

See the remarks in method BaseClone() below.

Parameters

remap

- A RemapDir instance used for remapping references during a Clone.

Returns

A pointer to the cloned item.

Reimplemented from ReferenceTarget.

CoreExport int GetSubObjectLevel ( )

inlineoverridevirtual

This method returns an integer which indicates the current sub-object level of the modifier or base object.

Returns

A value of 0 indicates object level. A value of 1 through NumSubObjTypes() are the sub-object levels in the same order as they are returned by GetSubObjType(int i) (with an offset of 1 of course).

Reimplemented from BaseObject.

{ return GetSubobjectLevel(); }

CoreExport int Display ( TimeValue  t, INode *  inode, ViewExp *  vpt, int  flags, ModContext *  mc  )

virtual

Remarks

This method is available in release 4.0 and later only.

This method is used to display the gizmo version of the patch mesh.

Parameters:

TimeValue t

The time to display the object.

INode* inode

The node to display.

ViewExp* vpt

An interface pointer that may be used to call methods associated with the viewports.

int flags

The display flags. See Display Flags for more information.

ModContext* mc

A pointer to the modifiers ModContext.

Reimplemented from BaseObject.

CoreExport void GetWorldBoundBox ( TimeValue  t, INode *  inode, ViewExp *  vp, Box3 &  box, ModContext *  mc  )

virtual

Remarks

This method is available in release 4.0 and later only.

This method returns the world space bounding box for the gizmo version of the patch mesh.

Parameters:

TimeValue t

The time to compute the bounding box.

INode* inode

The node to calculate the bounding box for.

ViewExp* vpt

An interface pointer that may be used to call methods associated with the viewports.

Box3& box

The bounding box which was computed.

ModContext* mc

A pointer to the modifiers ModContext.

Reimplemented from BaseObject.

CoreExport int NumSubObjTypes ( )

virtual

Objects and modifiers that support subobjects have to overwrite this method - as well as GetSubObjType() - and return a class derived from ISubObjType in GetSubObjType().

Developers can use the GenSubObjType for convenience. If the parameter passed into GetSubObjType is -1, the system requests a ISubObjType, for the current SubObjectLevel that flows up the modifier stack. If the subobject selection of the modifier or base object does not affect the subobj selection that flows up the stack, the method must return NULL. See meshsel.cpp for a sample implementation.

Returns

The number of sub-object types supported by the object or modifier.

Reimplemented from BaseObject.

CoreExport ISubObjType* GetSubObjType ( int  i )

virtual

Returns a pointer to the sub-object type for the sub-object whose index is passed.

If the parameter i passed is -1 the system requests an ISubObjType for the current SubObjectLevel that flows up the modifier stack. If the subobject selection of the modifier or base object does not affect the sub-object selection that flows up the stack NULL must be returned. See the sample code in /MAXSDK/SAMPLES/MODIFIERS/MESHSEL.CPP.

Parameters

i	The zero based index of the sub-object type to get. See the remarks above.

Returns

The sub-object type. See Class ISubObjType.

Reimplemented from BaseObject.

CoreExport Interval ObjectValidity ( TimeValue  t )

virtual

This method returns the validity interval of the object as a whole at the specified time.

Parameters

t	The time to compute the validity interval.

Returns

The validity interval of the object, including that queried from the base class.

Reimplemented from Object.

CoreExport BOOL GetExtendedProperties ( TimeValue  t, MSTR &  prop1Label, MSTR &  prop1Data, MSTR &  prop2Label, MSTR &  prop2Data  )

virtual

This method allows an object to return extended Properties fields.

It is called when the Object Properties dialog is being prepared. If you don't want to display any extended properties, simply return FALSE. To display extended property fields, place the field label in the appropriate label string and the display value in a formatted string. Two fields are supplied, each with a label and a data string; if only using one, make the second label field and data field blank (""). Return TRUE to indicate you have filled in the fields. The properties dialog will display your returned values.

Parameters

t	The time at which the strings are requested.
prop1Label	The string for the property 1 label.
prop1Data	The formatted data string to appear as property 1.
prop2Label	The string for the property 2 label.
prop2Data	The formatted data string to appear as property 2.

Returns

TRUE if this method is implemented and the fields are filled in; otherwise FALSE.

Reimplemented from Object.

CoreExport BOOL PolygonCount ( TimeValue  t, int &  numFaces, int &  numVerts  )

virtual

Retreives the number of faces and vertices of the polyginal mesh representation of this object.

If this method returns FALSE then this functionality is not supported. Note: Plug-In developers should use the global function GetPolygonCount(Object*, int&, int&) to retrieve the number f vertices and faces in an arbitrary object.

Parameters

t	The time at which to compute the number of faces and vertices.
numFaces	The number of faces is returned here.
numVerts	The number of vertices is returned here.

Returns

TRUE if the method is fully implemented; otherwise FALSE.

Reimplemented from Object.

CoreExport Interval ChannelValidity ( TimeValue  t, int  nchan  )

virtual

Retrieve the current validity interval for the nchan channel of the object.

Note

Most procedural objects won't implement this method since they don't have individual channels. Developers wanting to get the validity interval for a procedural object should use Object::ObjectValidity() instead.

Parameters

t	The time to retrieve the validity interval of the channel.
nchan	Specifies the channel to return the validity interval of. See Object Channels.

Returns

The validity interval of the specified channel.

Reimplemented from Object.

CoreExport void SetChannelValidity ( int  nchan, Interval  v  )

virtual

Sets the validity interval of the specified channel.

Parameters

nchan	Specifies the channel. See Object Channels.
v	The validity interval for the channel.

Reimplemented from Object.

CoreExport void InvalidateChannels ( ChannelMask  channels )

virtual

This method invalidates the intervals for the given channel mask.

This just sets the validity intervals to empty (calling SetEmpty() on the interval).

Parameters

channels

Specifies the channels to invalidate.

Reimplemented from Object.

CoreExport void TopologyChanged ( )

virtual

Reimplemented from Object.

CoreExport Interval ConvertValidity

(

TimeValue

t

)

virtual int IsDeformable ( )

inlinevirtual

Indicates whether this object is deformable.

A deformable object is simply an object with points that can be modified. Deformable objects must implement the generic deformable object methods (NumPoints(), GetPoint(i), SetPoint(i), Deform()). A deformable object is simply an object with points that can be modified. These points can be stored in any form the object wants. They are accessed through a virtual array interface with methods to get and set the 'i-th' point. If an object has tangents for instance, it would convert them to and from points as necessary. For example, a simple Bezier spline object that stored its control handles relative to the knot would convert them to be absolute when GetPoint() was called with 'i' specifying one of the control points. When the control point is later set, the object can convert it back to be relative to its knot. At this point it could also apply any constraints that it may have, such as maintaining a degree of continuity. The idea is that the entity calling GetPoint(i) and SetPoint(i) doesn't care what the point represents. It will simply apply some function to the point.

Note

The Deformable object methods only need to be implemented if the object returns TRUE from this method.

Returns

Return nonzero if the object is deformable and implements the generic deformable object methods; otherwise 0.

Reimplemented from Object.

{ return 1; }  

CoreExport int NumPoints ( )

virtual

The points of a deformable object are accessed through a virtual array interface.

This method specifies the number of points in the object. The meaning of 'points' is defined by the object. A TriObject uses the vertices as the points for example. b>

Returns

The number of points in the object.

Reimplemented from Object.

CoreExport Point3 GetPoint ( int  i )

virtual

The points of a deformable object are accessed through a virtual array interface.

This method returns the 'i-th' point of the object.

Note

If your plug-in is a modifier and you want to operate on the selected points of the object you are modifying, you can't tell which points are selected unless you know the type of object. If it is a generic deformable object there is no way of knowing since the way the object handles selection is up to it. Therefore, if you want to operate on selected points of a generic deformable object, use a Deformer.

Parameters

i	Specifies which point should be returned.

Returns

The 'i-th' point of the object.

Reimplemented from Object.

CoreExport void SetPoint ( int  i, const Point3 &  p  )

virtual

The points of a deformable object are accessed through a virtual array interface.

This method stores the 'i-th' point of the object.

Parameters

i	The index of the point to store.
p	The point to store.

Reimplemented from Object.

CoreExport BOOL IsPointSelected ( int  i )

virtual

Returns TRUE if the 'i-th' point is selected; otherwise FALSE.

Parameters

i	The zero based index of the point to check.

Reimplemented from Object.

CoreExport void PointsWereChanged ( )

virtual

Informs the object that its points have been deformed, so it can invalidate its cache.

A developer who uses the GetPoint() / SetPoint() approach to modifying an object will call PointsWereChanged() to invalidate the object's cache. For example, if a modifier calls SetPoint(), when it is finished it should call this method so the object can invalidate and/or update its bounding box and any other data it might cache.

Reimplemented from Object.

CoreExport void GetDeformBBox ( TimeValue  t, Box3 &  box, Matrix3 *  tm = NULL, BOOL  useSel = FALSE  )

virtual

This method computes the bounding box in the objects local coordinates or the optional space defined by tm.

Note: If you are looking for a precise bounding box, use this method and pass in the node's object TM (INode::GetObjectTM()) as the matrix.

Parameters

t	The time to compute the box.
box	A reference to a box the result is stored in.
tm	This is an alternate coordinate system used to compute the box. If the tm is not NULL this matrix should be used in the computation of the result.
useSel	If TRUE, the bounding box of selected sub-elements should be computed; otherwise the entire object should be used.

Reimplemented from Object.

CoreExport void Deform ( Deformer *  defProc, int  useSel  )

virtual

This is the method used to deform the object with a deformer.

The developer should loop through the object's points calling the defProc for each point (or each selected point if useSel is nonzero). The Deform() method is mostly a convenience. Modifiers can implement a 'Deformer' callback object which is passed to the Deform() method. The object then iterates through its points calling their deformer's callback for each point. The only difference between using the Deform() method as opposed to iterating through the points is that the Deform() method should respect sub-object selection. For example, the TriObject's implementation of Deform() iterates through its vertices, if the TriObject's selection level is set to vertex then it only calls the Deformer's callback for vertices that are selected. This way modifiers can be written that can be applied only to selection sets without any specific code to check selected points. The default implementation of this method just iterates through all points using GetPoint(i) and SetPoint(i). If an object supports sub-object selection sets then it should override this method.

Parameters

defProc	A pointer to an instance of the Deformer class. This is the callback object that actually performs the deformation.
useSel	A flag to indicate if the object should use the selected points only. If nonzero the selected points are used; otherwise all the points of the object are used.

Default Implementation:

void Object::Deform(Deformer *defProc,int useSel)
{
    int nv = NumPoints();
    for (int i=0; i<nv; i++)
        SetPoint(i,defProc->Map(i,GetPoint(i)));
    PointsWereChanged();
}

Sample Code:

This code shows the TriObject implementation of this method. Note how it looks at the useSel parameter to only call the selected points if required.

void TriObject::Deform(Deformer *defProc,int useSel)
{
    int nv = NumPoints();
    int i;
    if ( useSel ) {
        BitArray sel = mesh.VertexTempSel();
        float *vssel = mesh.getVSelectionWeights ();
        if (vssel) {
            for (i=0; i<nv; i++) {
                if(sel[i]) {
                    SetPoint(i,defProc->Map(i,GetPoint(i)));
                    continue;
                }
                if (vssel[i]==0) continue;
                Point3 & A = GetPoint(i);
                Point3 dir = defProc->Map(i,A) - A;
                SetPoint(i,A+vssel[i]*dir);
            }
        }
        else {
            for (i=0; i<nv; i++) if (sel[i])
                SetPoint(i,defProc->Map(i,GetPoint(i)));
        }
    }
    else {
        for (i=0; i<nv; i++)
            SetPoint(i,defProc->Map(i,GetPoint(i)));
    }
    PointsWereChanged();
}

Reimplemented from Object.

virtual BOOL IsParamSurface ( )

inlinevirtual

There are several methods used to access a parametric position on the surface of the object.

If this method returns TRUE then Object::GetSurfacePoint() will be called to return a point on the surface that corresponds to the u and v parameters passed to it. If this method returns FALSE then it is assumed the object does not support returning a point on the surface based on parameteric values. For sample code see /MAXSDK/SAMPLES/OBJECTS/SPHERE.CPP. If the object has several parametric surfaces then a second version of GetSurfacePoint() with an integer which specifies which surface will be called.

Reimplemented from Object.

{return TRUE;}

CoreExport Point3 GetSurfacePoint ( TimeValue  t, float  u, float  v, Interval &  iv  )

virtual

This method needs to be implemented if Object::IsParamSurface() returns TRUE.

This method is used to retrieve a point on the surface of the object based on two parameters of the surface, u and v. Note: This method assumes there is a single parametric surface. If there is more than 1 (NumSurfaces() returns > 1, use the GetSurface() method below which allows for multiple surfaces.

Parameters

t	The time to retrieve the point.
u	The parameter along the horizontal axis of the surface.
v	The parameter along the vertical axis of the surface.
iv	This interval is updated based on the interval of the surface parameter.

Reimplemented from Object.

virtual int IsMappable ( )

inlinevirtual

This method lets you know if the ApplyUVWMap() method is available for this object.

This is used by things like the UVW mapping modifier, so that it can determine which objects can have their mapping modified. Returns nonzero if the object is mappable; otherwise zero.

Reimplemented from Object.

{ return 1; }

virtual int NumMapChannels ( )

inlinevirtual

Returns the maximum number of channels supported by this type of object.

TriObjects for instance return MAX_MESHMAPS which is currently set to 100.

Reimplemented from Object.

{ return patch.NumMapChannels (); }

virtual int NumMapsUsed ( )

inlinevirtual

Returns the number of maps currently used by this object.

This is at least 1+(highest channel in use). This is used so a plug-in that does something to all map channels doesn't always have to do it to every channel up to MAX_MESHMAPS but rather only to this value.

Reimplemented from Object.

{ return patch.getNumMaps(); }

virtual void ApplyUVWMap ( int  type, float  utile, float  vtile, float  wtile, int  uflip, int  vflip, int  wflip, int  cap, const Matrix3 &  tm, int  channel = 1  )

inlinevirtual

This method may be called to map the object with UVW mapping coordinates.

If the object returns nonzero from IsMappable() then this method should be implemented.

Parameters

type	The mapping type. One of the following values: MAP_PLANAR MAP_CYLINDRICAL MAP_SPHERICAL MAP_BALL MAP_BOX
utile	Number of tiles in the U direction.
vtile	Number of tiles in the V direction.
wtile	Number of tiles in the W direction.
uflip	If nonzero the U values are mirrored.
vflip	If nonzero the V values are mirrored.
wflip	If nonzero the W values are mirrored.
cap	This is used with MAP_CYLINDRICAL. If nonzero, then any face normal that is pointing more vertically than horizontally will be mapped using planar coordinates.
tm	This defines the mapping space. As each point is mapped, it is multiplied by this matrix, and then it is mapped.
channel	This indicates which channel the mapping is applied to. See Mapping Channels .

Reimplemented from Object.

                                                                                      {
                patch.ApplyUVWMap(type,utile,vtile,wtile,uflip,vflip,wflip,cap,tm,channel); }

CoreExport int CanConvertToType ( Class_ID  obtype )

virtual

Indicates whether the object can be converted to the specified type.

If the object returns nonzero to indicate it can be converted to the specified type, it must handle converting to and returning an object of that type from ConvertToType().

See also

Class ObjectConverter for additional details on converting objects between types.

Parameters

obtype

The Class_ID of the type of object to convert to. See Class Class_ID, Class IDs defined in plugapi.h.

Returns

Nonzero if the object can be converted to the specified type; otherwise 0.

Default Implementation:

{ return 0; }

Reimplemented from Object.

CoreExport Object* ConvertToType ( TimeValue  t, Class_ID  obtype  )

virtual

This method converts this object to the type specified and returns a pointer it.

Note that if ConvertToType() returns a new object it should be a completely different object with no ties (pointers or references) to the original.

See also

class ObjectConverter for additional details on converting objects between types.

The following is an issue that developers of world space modifiers need to

be aware of if the world space modifier specifies anything but generic deformable objects as its input type. In other words, if a world space modifier, in its implementation of Modifier::InputType(), doesn't specifically return defObjectClassID then the following issue regarding the 3ds Max pipeline needs to be considered. Developers of other plug-ins that don't meet this condition don't need to be concerned with this issue.

World space modifiers that work on anything other than generic deformable

objects are responsible for transforming the points of the object they modify into world space using the ObjectState TM. To understand why this is necessary, consider how 3ds Max applies the node transformation to the object flowing down the pipeline.

In the geometry pipeline architecture, the node in the scene has its

transformation applied to the object in the pipeline at the transition between the last object space modifier and the first world space modifier. The node transformation is what places the object in the scene – thus this is what puts the object in world space. The system does this by transforming the points of the object in the pipeline by the node transformation. This is only possible however for deformable objects. Deformable objects are those that support the Object::IsDeformable(), NumPoints(), GetPoint() and SetPoint() methods. These deformable objects can be deformed by the system using these methods, and thus the system can modify the points to put them in world space itself.

If a world space modifier does not specify that it works on deformable

objects, the system is unable to transform the points of the object into world space. What it does instead is apply the transformation to the ObjectState TM. In this case, a world space modifier is responsible for transforming the points of the object into world space itself, and then setting the ObjectState TM to the identity. There is an example of this in the sample code for the Bomb space warp. The Bomb operates on TriObjects and implements InputType() as { return Class_ID(TRIOBJ_CLASS_ID,0); }. Since it doesn't specifically return defObjectClassID, it is thus responsible for transforming the points of the object into world space itself. It does this in its implementation of ModifyObject() as follows:

if (os->GetTM())
{
    Matrix3 tm = *(os->GetTM());
    for (int i=0; i<triOb->mesh.getNumVerts(); i++) {
        triOb->mesh.verts[i] = triOb->mesh.verts[i] *tm;
    }
    os->obj->UpdateValidity(GEOM_CHAN_NUM,os->tmValid());
    os->SetTM(NULL,FOREVER);
}

As the code above shows, the Bomb checks if the ObjectState TM is non-NULL. If it is, the points of the object are still not in world space and thus must be transformed. It does this by looping through the points of the TriObject and multiplying each point by the ObjectState TM. When it is done, it sets the ObjectState TM to NULL to indicate the points are now in world space. This ensure that any later WSMs will not transform the points with this matrix again.

For the Bomb world space modifier this is not a problem since it specifies

in its implementation of ChannelsChanged() that it will operate on the geometry channel (GEOM_CHANNEL). Certain world space modifiers may not normally specify GEOM_CHANNEL in their implementation of ChannelsChanged(). Consider the camera mapping world space modifier. Its function is to apply mapping coordinates to the object it is applied to. Thus it would normally only specify TEXMAP_CHANNEL for ChannelsChanged(). However, since it operates directly on TriObjects, just like the Bomb, the system cannot transform the points into world space, and therefore the camera mapping modifier must do so in its implementation of ModifyObject(). But since it is actually altering the points of the object by putting them into world space it is altering the geometry channel. Therefore, it should really specify GEOM_CHANNEL | TEXMAP_CHANNEL in its implementation of ChannelsChanged(). If it didn't do this, but went ahead and modified the points of the object anyway, it would be transforming not copies of the points, but the original points stored back in an earlier cache or even the base object.

This is the issue developers need to be aware of. To state this in simple

terms then: Any world space modifier that needs to put the points of the object into world space (since it doesn't implement InputType() as defObjectClassID) needs to specify GEOM_CHANNEL in its implementation of ChannelsChanged().

Parameters

t	The time at which to convert.
obtype	The Class_ID of the type of object to convert to. See Class Class_ID, Class IDs defined in plugapi.h.

Returns

A pointer to an object of type obtype.

Default Implementation:

{ return NULL; }

Sample Code:

The following code shows how a TriObject can be retrieved from a node. Note on the code that if you call ConvertToType() on an object and it returns a pointer other than itself, you are responsible for deleting that object.

// Retrieve the TriObject from the node
int deleteIt;
TriObject *triObject = GetTriObjectFromNode(ip->GetSelNode(0),deleteIt);
// Use the TriObject if available
if (!triObject) return;
// ...
// Delete it when done...
if (deleteIt) triObject->DeleteMe();

// Return a pointer to a TriObject given an INode or return NULL
// if the node cannot be converted to a TriObject
TriObject *Utility::GetTriObjectFromNode(INode *node, int &deleteIt)
{
    deleteIt = FALSE;
    Object *obj = node->EvalWorldState(0).obj;
    if (obj->CanConvertToType(Class_ID(TRIOBJ_CLASS_ID, 0))) {
        TriObject *tri = (TriObject *) obj->ConvertToType(0,Class_ID(TRIOBJ_CLASS_ID, 0));
// Note that the TriObject should only be deleted
// if the pointer to it is not equal to the object
// pointer that called ConvertToType()
        if (obj != tri) 
            deleteIt = TRUE;
        return tri;
    }
    else {
        return NULL;
    }
}

Reimplemented from Object.

CoreExport void GetCollapseTypes ( Tab< Class_ID > &  clist, Tab< MSTR * > &  nlist  )

virtual

When the user clicks on the Edit Stack button in the modify branch a list of 'Convert To:' types is presented.

The use may click on one of these choices to collapse the object into one of these types (for instance, an Editable Mesh or an Editable NURBS object). This method returns a list of Class_IDs and descriptive strings that specify the allowable types of objects that this object may be collapsed into. Note: Most plug-ins call the base class method in Object in their implementation of this method. The base class implementation provided by Object checks if the object can convert to both an editable mesh and an editable spline. If it can, these are added to the allowable types.

Parameters

clist	The table of allowable Class_IDs.
nlist	The table of pointers to strings that correspond to the table of Class_IDs above.

Sample Code:

void SphereObject::GetCollapseTypes(Tab<Class_ID> &clist,Tab<MSTR*>&nlist)
{
    Object::GetCollapseTypes(clist, nlist);
    Class_ID id = EDITABLE_SURF_CLASS_ID;
    MSTR *name = new MSTR(GetString(IDS_SM_NURBS_SURFACE));
    clist.Append(1,&id);
    nlist.Append(1,&name);
}

Reimplemented from Object.

CoreExport void FreeChannels ( ChannelMask  channels )

virtual

This method deletes the memory associated with the specified channels and set the intervals associated with the channels to invalid (empty).

Parameters

channels

Specifies the channels to free.

Reimplemented from Object.

CoreExport Object* MakeShallowCopy ( ChannelMask  channels )

virtual

This method must make a copy of its "shell" and then shallow copy (see below) only the specified channels.

It must also copy the validity intervals of the copied channels, and invalidate the other intervals.

Parameters

channels

The channels to copy.

Returns

A pointer to the shallow copy of the object.

Reimplemented from Object.

CoreExport void ShallowCopy ( Object *  fromOb, ChannelMask  channels  )

virtual

This method copies the specified channels from the fromOb to this and copies the validity intervals.

A plug-in needs to copy the specified channels from the specified object fromOb to itself by just copying pointers (not actually copying the data). No new memory is typically allocated, this method is just copying the pointers.

Parameters

fromOb	Object to copy the channels from.
channels	Channels to copy.

Reimplemented from Object.

CoreExport void NewAndCopyChannels ( ChannelMask  channels )

virtual

This method replaces the locked channels with newly allocated copies.

It will only be called if the channel is locked.

Parameters

channels

The channels to be allocate and copy.

Reimplemented from Object.

CoreExport DWORD GetSubselState ( )

virtual

For objects that have sub selection levels, this method returns the current selection level of the object.

For example, a TriObject has the following selection levels: object, vertex, face, edge. Other object types may have different selection levels. The only standard is that a value of 0 indicates object level. b>

Returns

The current selection level of the object.

Reimplemented from Object.

CoreExport int IntersectRay ( TimeValue  t, Ray &  r, float &  at, Point3 &  norm  )

virtual

This method is called to compute the intersection point and surface normal at this intersection point of the ray passed and the object.

Parameters

t	The time to compute the intersection.
r	Ray to intersect. See Class Ray.
at	The point of intersection.
norm	Surface normal at the point of intersection.

Returns

Nonzero if a point of intersection was found; otherwise 0.

See also

The Mesh class implementation of this method.

Reimplemented from Object.

CoreExport void GetWorldBoundBox ( TimeValue  t, INode *  inode, ViewExp *  vp, Box3 &  box  )

virtual

This method returns the world space bounding box for Objects (see below for the Sub-object gizmo or Modifiers gizmo version).

The bounding box returned by this method does not need to be precise. It should however be calculated rapidly. The object can handle this by transforming the 8 points of its local bounding box into world space and take the minimums and maximums of the result. Although this isn't necessarily the tightest bounding box of the objects points in world space, it is close enough.

Parameters

t	The time to compute the bounding box.
inode	The node to calculate the bounding box for.
vp	An interface pointer that can be used to call methods associated with the viewports.
box	Contains the returned bounding box.

Reimplemented from BaseObject.

CoreExport void GetLocalBoundBox ( TimeValue  t, INode *  inode, ViewExp *  vp, Box3 &  box  )

virtual

This is the object space bounding box, the box in the object's local coordinates.

The system expects that requesting the object space bounding box will be fast.

Parameters

t	The time to retrieve the bounding box.
inode	The node to calculate the bounding box for.
vp	An interface pointer that may be used to call methods associated with the viewports.
box	Contains the returned bounding box.

Reimplemented from BaseObject.

CoreExport int IsInstanceDependent ( )

virtual

If an object creates different meshes depending on the particular instance (view-dependent) it should return nonzero; otherwise 0.

Reimplemented from GeomObject.

CoreExport Mesh* GetRenderMesh ( TimeValue  t, INode *  inode, View &  view, BOOL &  needDelete  )

virtual

This method should be implemented by all renderable GeomObjects.

It provides a mesh representation of the object for use by the renderer. Primitives that already have a mesh cached can just return a pointer to it (and set needDelete to FALSE). Implementations of this method which take a long time should periodically call View::CheckForRenderAbort() to see if the user has canceled the render. If canceled, the function can either return NULL, or return a non null pointer with the appropriate value for needDelete. (If needDelete is TRUE a non-null mesh will be deleted.)

Parameters

t	The time to get the mesh.
inode	The node in the scene.
view	If the renderer calls this method it will pass the view information here. See Class View.
needDelete	Set to TRUE if the renderer should delete the mesh, FALSE otherwise.

Returns

A pointer to the mesh object.

Reimplemented from GeomObject.

CoreExport PatchMesh& GetPatchMesh

(

TimeValue

t

)

CoreExport Mesh& GetMesh

(

TimeValue

t

)

virtual CoreExport void DeleteThis ( )

virtual

Deletes an instance of this class.

3ds Max calls this method when it needs to delete a plugin object (an instance of a class derived from Animatable). Similarly, plugins that need to delete instances of an Animatable or a class directly derived from it via an Animatable pointer, should call this method instead of calling directly operator delete. Following these rules will ensure that the same memory manager is used to allocate and deallocate the object. The default implementation of this method deletes the object. Plugin instances that never need to be deleted from the heap can overwrite this method to do nothing.

Note

See the method ClassDesc::Create() for details on how Max allocates plugin objects.

See ReferenceMaker::DeleteMe() and ReferenceTarget::MaybeAutoDelete() for information on how plugin instances are deleted by the system.

Remarks

See Memory Management.

See also

Required DLL Functions, Class ClassDesc.

Reimplemented from Animatable.

virtual void FreeCaches ( )

inlinevirtual

Remarks

This is called to delete any item that can be rebuilt. For example, the procedural sphere object has a mesh that it caches. It could call Mesh::FreeAll() on the mesh from this method. This will free the vertex/face/uv arrays. If the sphere is ever evaluated again it can just rebuild the mesh. If an object (like a sphere) has modifiers applied to it, and those modifiers are not animated, then the result of the pipeline is cached in the node. So there is no reason for the sphere to also have a cache of its representation. Therefore when this method is called, the sphere can free the data of the mesh.

Default Implementation:

{}

Reimplemented from Animatable.

{patch.InvalidateGeomCache(); }

virtual Class_ID ClassID ( )

inlinevirtual

Retrieves a constant that uniquely identifies the plugin class.

This method must return the unique ID for the plugin class. If two ClassIDs conflict, the system will only load the first conflicting one it finds. A program (gencid.exe) is provided to generate unique class id values.

Returns

A class id that uniquely identifies a plugin class

See also

Class ClassID, class ID definititions in plugapi.h.

Reimplemented from Animatable.

{ return Class_ID(PATCHOBJ_CLASS_ID,0); }

CoreExport BOOL IsSubClassOf ( Class_ID  classID )

virtual

returns true if the animatable has sub-classed off the given class

If an object is a sub-class of a particular class, it will have a different ClassID() because it is a different class. This method allows an object to indicate that it is a sub-class of a particular class and therefore can be treated as one. For example, a class could be derived from TriObject. This derived class would have a different ClassID() then the TriObject's class ID however it still can be treated (cast) as a TriObject because it is derived from TriObject. Note the default implelementation: a class is considered to also be a subclass of itself.

Parameters

classID

The Class_ID of the item that this class is a sub-class of.

Returns

TRUE if this class is a sub-class of classID; otherwise FALSE.

Default Implementation:

{return classID==ClassID();}

Reimplemented from Animatable.

virtual CoreExport void GetClassName ( MSTR &  s )

virtual

Retrieves the (localizable) name of the plugin class.

This name is usually used internally for debugging purposes. For Material plug-ins this method is used to put up the material "type" name in the Material Editor.

Parameters

s	Reference to a string filled in with the name of the plugin class

Reimplemented from ReferenceTarget.

CoreExport void* GetInterface ( ULONG  id )

virtual

Inherited from Animatable.

Returns a pointer to the interface.

Parameters

id	- The id of the interface.

Returns

A Pointer to the Interface

Reimplemented from Object.

virtual CoreExport const MCHAR* GetObjectName ( )

virtual

Returns

the name that will appear in the history browser (modifier stack).

Reimplemented from BaseObject.

int NumSubs ( )

inlinevirtual

Remarks

The system uses a virtual array mechanism to access the sub-anims of a plug-in. This method returns the total number of sub-anims maintained by the plug-in. If a plug-in is using a parameter block to manage its parameters it should just return 1 for all the parameters directed by the parameter block.

Returns

The number of sub-anims used by the plug-in.

Default Implementation:

{ return 0; }

Reimplemented from Animatable.

{ return 1; }   // Just tell it about the master point controller

CoreExport Animatable* SubAnim ( int  i )

virtual

Remarks

This method returns a pointer to the 'i-th' sub-anim. If a plug-in is using a parameter block to manage all its parameters it should just return a pointer to the parameter block itself from this method. This method may return NULL so developers need to check the return value before calling other sub anim methods (such as SubAnimName()).

Parameters

i	This is the index of the sub-anim to return.

Default Implementation:

{ return NULL };

Reimplemented from Animatable.

CoreExport MSTR SubAnimName ( int  i )

virtual

Remarks

This method returns the name of the 'i-th' sub-anim to appear in track view. The system has no idea what name to assign to the sub-anim (it only knows it by the virtual array index), so this method is called to retrieve the name to display. Developer need to make sure the 'i-th' SubAnim() is non-NULL or this method will fail.

Parameters

i	The index of the parameter name to return

Returns

The name of the 'i-th' parameter.

Reimplemented from Animatable.

CoreExport BOOL AssignController ( Animatable *  control, int  subAnim  )

virtual

Remarks

This method is called to assign the controller to the sub-anim whose index is passed.

Parameters

control	The controller to assign.
subAnim	The index of the sub-anim to assign the controller to.

Default Implementation:

{ return FALSE; }

Returns

Returns TRUE if the controller was assigned; otherwise FALSE.

Reimplemented from Animatable.

int SubNumToRefNum ( int  subNum )

inlinevirtual

Remarks

This method is used for copying and pasting in the track view. It converts an anim index to a reference index or returns -1 if there is no correspondence. If a client does not wish an anim to be copied or pasted then it can return -1 even if there is a corresponding reference num.

Parameters

subNum

The anim index to return the corresponding reference index of.

Default Implementation:

{ return -1}

Returns

The reference index corresponding to the anim index passed. Return -1 if there is no correspondence.

Reimplemented from Animatable.

{return subNum;}

CoreExport BOOL SelectSubAnim ( int  subNum )

virtual

Remarks

This method is available in release 2.0 and later only.

When a user is in Track View in Edit Keys mode and clicks on the green triangle of a controller then this method will be called on the client with the appropriate sub number that corresponds to it. For instance, the Editable Mesh object implements this to allow the user to select vertices that are animated from the Track View.

Parameters

subNum

The index of the sub-anim that was clicked on.

Returns

TRUE if implemented; otherwise FALSE. (Track View will call RedrawViewports() if something returns TRUE from this method).

Default Implementation:

{return FALSE;}

Reimplemented from Animatable.

CoreExport BOOL HasControllers

(

BOOL

assertCheck = TRUE

)

CoreExport void RescaleWorldUnits ( float  f )

virtual

Rescale size of all world units in reference hierarchy.

This method is available in release 2.0 and later only. Must call ClearAFlagInHierarchy(rm, A_WORK1) or ClearAFlagInAllAnimatables(A_WORK1) before doing this on a reference hierarchy. This may be implemented to rescale the size of all world units in a reference hierarchy. Developers must call

if (TestAFlag(A_WORK1))
    return;
SetAFlag(A_WORK1);

before doing this on a reference hierarchy.

Parameters

f	- The scale factor.

Reimplemented from ReferenceMaker.

int NumRefs ( )

inlinevirtual

Returns the total number of references this ReferenceMaker can hold.

The plugin implements this method to indicate the total number of of references it can make. This includes all references whether they are NULL (inactive) or non-NULL (active) at the time when this method is called. A plugin can hold a variable number of references, thus the return value of this method is not to be cached and reused by client code.

Returns

The total number of references this plugin can hold. The default implementation is return 0.

Reimplemented from ReferenceMaker.

{return vertCont.Count() + vecCont.Count() + 1;}    // vert conts + vec conts + master

CoreExport RefTargetHandle GetReference ( int  i )

virtual

Returns the 'i-th' reference.

The plugin implements this method to return its 'i-th' reference. The plug-in simply keeps track of its references using an integer index for each one. This method is normally called by the system.

Parameters

i	- The index of the reference to retrieve. Valid values are from 0 to NumRefs()-1.

Returns

The reference handle of the 'i-th' reference. Note that different calls to this method with the same 'i' value can result in different reference handles being retrieved, as the plugin changes the scene objects it references as its 'i-th' reference.

Reimplemented from ReferenceMaker.

virtual CoreExport void SetReference ( int  i, RefTargetHandle  rtarg  )

protectedvirtual

Stores a ReferenceTarget as its 'i-th' reference`.

The plugin implements this method to store the reference handle passed to it as its 'i-th' reference. In its implementation of this method, the plugin should simply assign the reference handle passed in as a parameter to the member variable that holds the 'i-th' reference. Other reference handling methods such as ReferenceMaker::DeleteReference(), or ReferenceMaker::ReplaceReference() should not be called from within this method. The plugin itself or other plugins should not call this method directly. The system will call this method when a new reference is created or an existing one is replaced by calling ReferenceMaker::ReplaceReference().

Parameters

i	- The index of the reference to store. Valid values are from 0 to NumRefs()-1.
rtarg	- The reference handle to store.

Reimplemented from ReferenceMaker.

CoreExport int RemapRefOnLoad ( int  iref )

virtual

Used to load old files with references.

Implement this if you have added or deleted references and are loading an old file that needs to have its references remapped. This method is used when you have modified a ReferenceMaker to add or delete references, and are loading old files. It gets called during the reference mapping process, after the Load() method is called. You determine what version is loading in the Load(), and store the version in a variable which you can look at in RemapRefOnLoad() to determine how to remap references. The default implementation of this method just returns the same value it is passed, so you don't need to implement it unless you have added or deleted references from your class. This method makes it a lot easier to load old files when the reference topology has changed.

Parameters

iref	- The input index of the reference.

Returns

The output index of the reference.

Reimplemented from ReferenceMaker.

CoreExport void PlugControllersSel

(

TimeValue

t

)

CoreExport void AllocVertContArray

(

int

count

)

CoreExport void AllocVecContArray

(

int

count

)

CoreExport void AllocContArrays	(	int	vertCount,
		int	vecCount
	)

CoreExport void ReplaceVertContArray

(

Tab< Control * > &

nc

)

CoreExport void ReplaceVecContArray

(

Tab< Control * > &

nc

)

CoreExport void ReplaceContArrays	(	Tab< Control * > &	vertnc,
		Tab< Control * > &	vecnc
	)

CoreExport BOOL PlugVertControl	(	TimeValue	t,
		int	i
	)

CoreExport BOOL PlugVecControl	(	TimeValue	t,
		int	i
	)

CoreExport void SetVertAnim	(	TimeValue	t,
		int	point,
		Point3	pt
	)

CoreExport void SetVecAnim	(	TimeValue	t,
		int	point,
		Point3	pt
	)

CoreExport void SetVertCont	(	int	i,
		Control *	c
	)

CoreExport void SetVecCont	(	int	i,
		Control *	c
	)

CoreExport IOResult Save ( ISave *  isave )

virtual

Called for saving data.

Called by the system to allow the plugin to save its data.

Parameters

isave

- This pointer may be used to call methods to write data to disk. See the section on Loading and Saving Plug-in Data for an overview of the load/save process.

Returns

The default implementation is return IO_OK.

• IO_OK means the result was acceptable, with no errors.
• IO_ERROR This should be returned if an error occurred.

Reimplemented from ReferenceMaker.

CoreExport IOResult Load ( ILoad *  iload )

virtual

Called for loading data.

Called by the system to allow the plug-in to load its data. See the section on Loading and Saving Plug-in Data for an overview of the load - save process.

Parameters

iload

- This interface pointer may be used to call methods to read data from disk.

Returns

The default implementation is return IO_OK.

• IO_OK means the result was acceptable, with no errors.
• IO_ERROR This should be returned if an error occurred.

Reimplemented from ReferenceMaker.

virtual CoreExport void UpdatePatchMesh ( TimeValue  t )

virtual

Remarks

This method is available in release 2.0 and later only.

This should be implemented by classes derived from PatchObject whose patches change over time.

Parameters:

TimeValue t

The time to update the patch mesh.

Default Implementation:

{}

CoreExport void PrepareMesh

(

TimeValue

t

)

Remarks

This method checks to see if the mesh cache is up to date, and if not, it generates it.

Parameters:

TimeValue t

This parameter is available in release 2.0 and later only.

The mesh cache should be generated to reflect this time.

CoreExport Mesh& GetUnrelaxedMesh

(

TimeValue

t

)

CoreExport BOOL ShowLattice ( )

inline

Remarks

Returns TRUE if the patch lattice is displayed; otherwise FALSE.

{ return patch.GetDispFlag(DISP_LATTICE) ? TRUE : FALSE; }

CoreExport BOOL ShowVerts ( )

inline

Remarks

Returns TRUE if the patch vertices are shown; otherwise FALSE.

{ return patch.GetDispFlag(DISP_VERTS) ? TRUE : FALSE; }

CoreExport void SetShowLattice ( BOOL  sw )

inline

Remarks

Sets the state of the lattice display switch.

Parameters:

BOOL sw

TRUE to turn on the lattice display; FALSE to turn it off.

{ if(sw) patch.SetDispFlag(DISP_LATTICE); else patch.ClearDispFlag(DISP_LATTICE); }

CoreExport void SetShowVerts ( BOOL  sw )

inline

Remarks

Sets the state of the vertex display switch

Parameters:

BOOL sw

TRUE to turn on the vertex display; FALSE to turn it off.

{ if(sw) patch.SetDispFlag(DISP_VERTS); else patch.ClearDispFlag(DISP_VERTS); }

CoreExport void SetMeshSteps

(

int

steps

)

Remarks

Sets the number of mesh steps (viewport).

Parameters:

int steps

The number of steps to set.

CoreExport int GetMeshSteps

(

)

Remarks

Returns the number of mesh steps (viewport).

CoreExport void SetMeshStepsRender

(

int

steps

)

Remarks

This method is available in release 3.0 and later only.

Sets the Surface Render Steps setting.

Parameters:

int steps

The value to set.

CoreExport int GetMeshStepsRender

(

)

Remarks

This method is available in release 3.0 and later only.

Returns the Surface Render Steps setting.

CoreExport BOOL Relaxing

(

)

CoreExport void SetRelax

(

BOOL

v

)

CoreExport void SetRelaxViewports

(

BOOL

v

)

CoreExport void SetRelaxValue

(

float

v

)

CoreExport void SetRelaxIter

(

int

v

)

CoreExport void SetRelaxBoundary

(

BOOL

v

)

CoreExport void SetRelaxSaddle

(

BOOL

v

)

BOOL GetRelax ( )

inline

{ return patch.GetRelax(); }

BOOL GetRelaxViewports ( )

inline

{ return patch.GetRelaxViewports(); }

float GetRelaxValue ( )

inline

{ return patch.GetRelaxValue(); }

int GetRelaxIter ( )

inline

{ return patch.GetRelaxIter(); }

BOOL GetRelaxBoundary ( )

inline

{ return patch.GetRelaxBoundary(); }

BOOL GetRelaxSaddle ( )

inline

{ return patch.GetRelaxSaddle(); }

CoreExport void SetShowInterior

(

BOOL

si

)

Remarks

This method is available in release 3.0 and later only.

Sets the 'Show Interior Edges' value.

Parameters:

BOOL si

TRUE for on; FALSE for off.

CoreExport BOOL GetShowInterior

(

)

Remarks

This method is available in release 3.0 and later only.

Returns the 'Show Interior Edge' setting; TRUE if on; FALSE if off.

CoreExport void SetUsePatchNormals

(

BOOL

usePatchNorm

)

CoreExport BOOL GetUsePatchNormals

(

)

CoreExport void SetAdaptive

(

BOOL

sw

)

Remarks

Sets the state of the adaptive switch.

Parameters:

BOOL sw

TRUE to turn on; FALSE to turn off.

CoreExport BOOL GetAdaptive

(

)

Remarks

Returns the state of the adaptive switch. TRUE is on; FALSE is off.

CoreExport void SetViewTess

(

TessApprox

tess

)

Remarks

Sets the tesselation approximation object used for viewport rendering.

Parameters:

TessApprox tess

The tesselation approximation object to be used for viewport rendering.

CoreExport TessApprox GetViewTess

(

)

Remarks

Returns the tesselation approximation object used for rendering in the viewports.

CoreExport void SetProdTess

(

TessApprox

tess

)

Remarks

Sets the tesselation approximation object used for production rendering.

Parameters:

TessApprox tess

The tesselation approximation object to be used for production rendering.

CoreExport TessApprox GetProdTess

(

)

Remarks

Returns the tesselation approximation object used for production rendering.

CoreExport void SetDispTess

(

TessApprox

tess

)

Remarks

Sets the tesselation approximation object used for display in the viewports.

Parameters:

TessApprox tess

The tesselation approximation object to be used for the viewports.

CoreExport TessApprox GetDispTess

(

)

Remarks

Returns the tesselation approximation object used for display in the viewports.

CoreExport BOOL GetViewTessNormals

(

)

Remarks

Returns TRUE if normals are used from the viewport tesselator; otherwise FALSE.

CoreExport void SetViewTessNormals

(

BOOL

use

)

Remarks

Sets if normals are used from the viewport tesselator.

Parameters:

BOOL use

TRUE to use normals; FALSE to not use them.

CoreExport BOOL GetProdTessNormals

(

)

Remarks

Returns TRUE if normals are used from the production renderer tesselator; otherwise FALSE.

CoreExport void SetProdTessNormals

(

BOOL

use

)

Remarks

Sets if normals are used from the production renderer tesselator.

Parameters:

BOOL use

TRUE to use normals; FALSE to not use them.

CoreExport BOOL GetViewTessWeld

(

)

Remarks

Returns TRUE if the viewport mesh is welded after tesselation; otherwise FALSE.

CoreExport void SetViewTessWeld

(

BOOL

weld

)

Remarks

Sets if the viewport mesh is welded after tesselation; otherwise FALSE.

Parameters:

BOOL weld

TRUE to weld; FALSE to not weld.

CoreExport BOOL GetProdTessWeld

(

)

Remarks

Returns TRUE if the production renderer mesh is welded after tesselation; otherwise FALSE.

CoreExport void SetProdTessWeld

(

BOOL

weld

)

Remarks

Sets if the production renderer mesh is welded after tesselation; otherwise FALSE.

Parameters:

BOOL weld

TRUE to weld; FALSE to not weld.

CoreExport void InvalidateMesh

(

)

Remarks

Invalidates the mesh cache.

CoreExport void InvalidateRelaxedMesh

(

)

virtual CoreExport void BeginEditParams ( IObjParam *  ip, ULONG  flags, Animatable *  prev  )

virtual

Remarks

This method is called by the system when the user may edit the item's (object, modifier, controller, etc.) parameters.

Parameters

ip	Interface pointer. The developer can use it to call methods such as AddRollupPage(). Note that this pointer is only valid between BeginEditParams() and EndEditParams(). It should not be used outside this interval.
flags	Describe which branch of the command panel or dialog the item is being edited in. The following are possible values: BEGIN_EDIT_CREATE Indicates an item is being edited in the create branch. BEGIN_EDIT_MOTION Indicates a controller is being edited in the motion branch. BEGIN_EDIT_HIERARCHY Indicates a controller is being edited in the Pivot subtask of the hierarchy branch. BEGIN_EDIT_IK Indicates a controller is being edited in the IK subtask of the hierarchy branch. BEGIN_EDIT_LINKINFO Indicates a controller is being edited in the Link Info subtask of the hierarchy branch.
prev	Pointer to an Animatable object. This parameter may be used in the motion and hierarchy branches of the command panel. This pointer allows a plug-in to look at the ClassID of the previous item that was being edited, and if it is the same as this item, to not replace the entire UI in the command panel, but simply update the values displayed in the UI fields. This prevents the UI from 'flickering' when the current item begins its edit. For example, if you are in the motion branch and are looking at an item's PRS controller values, and then select another item that is displayed with a PRS controller, the UI will not change - only the values displayed in the fields will change. If however you selected a target camera that has a lookat controller (not a PRS controller) the UI will change because a different set of parameters need to be displayed. Note that for items that are edited in the modifier branch this field can be ignored.

Reimplemented from Animatable.

virtual CoreExport void EndEditParams ( IObjParam *  ip, ULONG  flags, Animatable *  next  )

virtual

Remarks

This method is called when the user is finished editing an objects parameters. The system passes a flag into the EndEditParams() method to indicate if the rollup page should be removed. If this flag is TRUE, the plug-in must un-register the rollup page, and delete it from the panel.

Parameters

ip	An interface pointer. The developer may use the interface pointer to call methods such as DeleteRollupPage().
flags	The following flag may be set: END_EDIT_REMOVEUI If TRUE, the item's user interface should be removed.
next	Animatable pointer. Can be used in the motion and hierarchy branches of the command panel. It allows a plug-in to look at the ClassID of the next item that was being edited, and if it is the same as this item, to not replace the entire UI in the command panel. Note that for items that are edited in the modifier branch this field can be ignored.

Reimplemented from Animatable.

CoreExport int GetSubobjectLevel

(

)

CoreExport int GetSubobjectType

(

)

Remarks

This method is available in release 4.0 and later only.

This method goes hand-in-hand with GetSubobjectLevel(), except that this method returns the type of geometry that is actually being acted upon.

Returns

The sub-object type, either PO_PATCH or PO_ELEMENT.

CoreExport void SetSubobjectLevel

(

int

level

)

CoreExport void ActivateSubobjSel ( int  level, XFormModes &  modes  )

virtual

When the user changes the selection of the sub-object drop down, this method is called to notify the plug-in.

This method should provide instances of a class derived from CommandMode to support move, rotate, non-uniform scale, uniform scale, and squash modes. These modes replace their object mode counterparts however the user still uses the move/rotate/scale tool buttons in the toolbar to activate them. If a certain level of sub-object selection does not support one or more of the modes NULL may be passed. If NULL is specified the corresponding toolbar button will be grayed out.

Parameters

level	The sub-object selection level the command modes should be set to support. A level of 0 indicates object level selection. If level is greater than or equal to 1 the index refers to the types registered by the object in the order they appeared in the list when registered by Interface::RegisterSubObjectTypes(). See Class Interface.
modes	The command modes to support

Sample Code:

void SimpleModBase::ActivateSubobjSel(int level, XFormModes& modes)
{
    switch ( level ) {
        case 1:                                   // Modifier box
            modes = XFormModes(moveMode,rotMode,nuscaleMode,uscaleMode,squashMode,NULL);
            break;
        case 2:                                   // Modifier Center
            modes = XFormModes(moveMode,NULL,NULL,NULL,NULL,NULL);
            break;
    }
    NotifyDependents(FOREVER,PART_DISPLAY,REFMSG_CHANGE);
}

See also

Class XFormModes.

Reimplemented from BaseObject.

CoreExport int SubObjectIndex ( HitRecord *  hitRec )

virtual

Returns the index of the sub-object element identified by the HitRecord hitRec.

See Class HitRecord. The sub-object index identifies a sub-object component. The relationship between the index and the component is established by the modifier. For example an edit modifier may allow the user to select a group of faces and these groups of faces may be identified as group 0, group 1, group 2, etc. Given a hit record that identifies a face, the edit modifier's implementation of this method would return the group index that the face belonged to.

Reimplemented from BaseObject.

CoreExport void GetSubObjectTMs ( SubObjAxisCallback *  cb, TimeValue  t, INode *  node, ModContext *  mc  )

virtual

When the user is in a sub-object selection level, the system needs to get the reference coordinate system definition from the current modifier being edited so that it can display the axis.

This method returns the axis system of the reference coordinate system. The plug-in enumerates its TMs and calls the callback cb once for each. See Sub-Object Coordinate Systems.

Parameters

cb	The callback object whose methods may be called.
t	The time to enumerate the TMs.
node	A pointer to the node.
mc	A pointer to the ModContext.

Reimplemented from BaseObject.

CoreExport void ShowEndResultChanged ( BOOL  showEndResult )

virtual

Remarks

This method is available in release 4.0 and later only.

This method is called by the system then the status of the Show End Result function changes (ie. the Show End Results button has been toggled on or off). Note that setting the state of the Show End Result is done through the Interface::SetShowEndResult() method.

Parameters:

BOOL showEndResult

This flag specifies the Show End Result status, which is TRUE if on; FALSE if off.

Reimplemented from BaseObject.

CoreExport void GetSubObjectCenters ( SubObjAxisCallback *  cb, TimeValue  t, INode *  node, ModContext *  mc  )

virtual

When the user is in a sub-object selection level, the system needs to get the reference coordinate system definition from the current modifier being edited so that it can display the axis.

This method specifies the position of the center. The plug-in enumerates its centers and calls the callback cb once for each.

Parameters

cb	The callback object whose methods may be called. See Class SubObjAxisCallback.
t	The time to enumerate the centers.
node	A pointer to the node.
mc	A pointer to the ModContext.

Reimplemented from BaseObject.

CoreExport void SelectSubComponent ( HitRecord *  hitRec, BOOL  selected, BOOL  all, BOOL  invert  )

virtual

This method is called to change the selection state of the component identified by hitRec.

Parameters

hitRec	Identifies the component whose selected state should be set. See Class HitRecord .
selected	TRUE if the item should be selected; FALSE if the item should be de-selected.
all	TRUE if all components in the HitRecord chain should be selected; FALSE if only the top-level HitRecord should be selected. (A HitRecord contains a Next() pointer; typically you want to do whatever you're doing to all the Next()'s until Next() returns NULL).
invert	This is set to TRUE when all is also set to TRUE and the user is holding down the Shift key while region selecting in select mode. This indicates the items hit in the region should have their selection state inverted

Reimplemented from BaseObject.

CoreExport void ClearSelection ( int  selLevel )

virtual

This method is called to clear the selection for the given sub-object level.

All sub-object elements of this type should be deselected. This will be called when the user chooses Select None from the 3ds Max Edit menu.

Parameters

selLevel

Specifies the selection level to clear.

Reimplemented from BaseObject.

CoreExport void SelectAll ( int  selLevel )

virtual

This method is called to select every element of the given sub-object level.

This will be called when the user chooses Select All from the 3ds Max Edit menu.

Parameters

selLevel

Specifies the selection level to select.

Reimplemented from BaseObject.

CoreExport void InvertSelection ( int  selLevel )

virtual

This method is called to invert the specified sub-object level.

If the element is selected it should be deselected. If it's deselected it should be selected. This will be called when the user chooses Select Invert from the 3ds Max Edit menu.

Parameters

selLevel

Specifies the selection level to invert.

Reimplemented from BaseObject.

CoreExport void PatchSelChanged

(

)

CoreExport void InvalidateSurfaceUI

(

)

CoreExport void InvalidateOpsUI

(

)

CoreExport void ChangeRememberedPatch

(

int

type

)

CoreExport void ChangeSelPatches

(

int

type

)

CoreExport int RememberPatchThere	(	HWND	hWnd,
		IPoint2	m
	)

CoreExport void SetRememberedPatchType

(

int

type

)

CoreExport void ChangeRememberedVert

(

int

type

)

CoreExport void ChangeSelVerts

(

int

type

)

CoreExport int RememberVertThere	(	HWND	hWnd,
		IPoint2	m
	)

CoreExport void SetRememberedVertType

(

int

type

)

CoreExport void XFormVerts	(	POXFormProc *	xproc,
		TimeValue	t,
		Matrix3 &	partm,
		Matrix3 &	tmAxis
	)

CoreExport void XFormHandles	(	POXFormProc *	xproc,
		TimeValue	t,
		Matrix3 &	partm,
		Matrix3 &	tmAxis,
		int	handleIndex
	)

CoreExport void Move ( TimeValue  t, Matrix3 &  partm, Matrix3 &  tmAxis, Point3 &  val, BOOL  localOrigin = FALSE  )

virtual

When this method is called the plug-in should respond by moving its selected sub-object components.

Parameters

t	The time of the transformation.
partm	The 'parent' transformation matrix. This matrix represents a transformation that would take points in the modifier's space and convert them into world space points. This is constructed as the node's transformation matrix times the inverse of the ModContext's transformation matrix. The node whose transformation is used is the node the user clicked on in the scene - modifiers can be instanced so there could be more than one node.
tmAxis	The matrix that represents the axis system. This is the space in which the transformation is taking place.
val	This value is a vector with X, Y, and Z representing the movement along each axis.
localOrigin	When TRUE the transformation is occurring about the sub-object's local origin.

Reimplemented from BaseObject.

CoreExport void Rotate ( TimeValue  t, Matrix3 &  partm, Matrix3 &  tmAxis, Quat &  val, BOOL  localOrigin = FALSE  )

virtual

When this method is called the plug-in should respond by rotating its selected sub-object components.

Parameters

t	The time of the transformation.
partm	The 'parent' transformation matrix. This matrix represents a transformation that would take points in the modifier's space and convert them into world space points. This is constructed as the node's transformation matrix times the inverse of the ModContext's transformation matrix. The node whose transformation is used is the node the user clicked on in the scene - modifiers can be instanced so there could be more than one node.
tmAxis	The matrix that represents the axis system. This is the space in which the transformation is taking place.
val	The amount to rotate the selected components.
localOrigin	When TRUE the transformation is occurring about the sub-object's local origin. Note: This information may be passed onto a transform controller (if there is one) so they may avoid generating 0 valued position keys for rotation and scales. For example if the user is rotating an item about anything other than its local origin then it will have to translate in addition to rotating to achieve the result. If a user creates an object, turns on the animate button, and rotates the object about the world origin, and then plays back the animation, the object does not do what the was done interactively. The object ends up in the same position, but it does so by both moving and rotating. Therefore both a position and a rotation key are created. If the user performs a rotation about the local origin however there is no need to create a position key since the object didn't move (it only rotated). So a transform controller can use this information to avoid generating 0 valued position keys for rotation and scales.

Reimplemented from BaseObject.

CoreExport void Scale ( TimeValue  t, Matrix3 &  partm, Matrix3 &  tmAxis, Point3 &  val, BOOL  localOrigin = FALSE  )

virtual

When this method is called the plug-in should respond by scaling its selected sub-object components.

Parameters

t	The time of the transformation.
partm	The 'parent' transformation matrix. This matrix represents a transformation that would take points in the modifier's space and convert them into world space points. This is constructed as the node's transformation matrix times the inverse of the ModContext's transformation matrix. The node whose transformation is used is the node the user clicked on in the scene - modifiers can be instanced so there could be more than one node.
tmAxis	The matrix that represents the axis system. This is the space in which the transformation is taking place.
val	This value is a vector with X, Y, and Z representing the scale along X, Y, and Z respectively.
localOrigin	When TRUE the transformation is occurring about the sub-object's local origin. See the note above in the Rotate method. The following methods may be used to receive notification about the starting and ending phases of transforming the item when in sub-object selection.

Reimplemented from BaseObject.

CoreExport void TransformStart ( TimeValue  t )

virtual

This method is called before the first Move(), Rotate() or Scale() call and before a hold is in effect.

Parameters

t	The current time when this method is called.

Reimplemented from BaseObject.

CoreExport void TransformFinish ( TimeValue  t )

virtual

This method is called after the user has completed the Move(), Rotate() or Scale() operation and the undo object has been accepted.

Parameters

t	The current time when this method is called.

Reimplemented from BaseObject.

CoreExport void TransformCancel ( TimeValue  t )

virtual

This method is called when the transform operation is canceled by a right-click and the undo has been canceled.

Parameters

t	The current time when this method is called.

Reimplemented from BaseObject.

CoreExport ObjectState Eval ( TimeValue  t )

virtual

This method is called to evaluate the object and return the result as an ObjectState.

When the system has a pointer to an object it doesn't know if it's a procedural object or a derived object. So it calls Eval() on it and gets back an ObjectState. A derived object managed by the system may have to call Eval() on its input for example. A plug-in (like a procedural object) typically just returns itself. A plug-in that does not just return itself is the Morph Object (/MAXSDK/SAMPLES/OBJECTS/MORPHOBJ.CPP). This object uses a morph controller to compute a new object and fill in an ObjectState which it returns.

Parameters

t	Specifies the time to evaluate the object.

Returns

The result of evaluating the object as an ObjectState.

Sample Code:

Typically this method is implemented as follows:

{ return ObjectState(this); }

Implements Object.

BOOL SupportsNamedSubSels ( )

inlinevirtual

An object that supports sub-object selection can choose to support named sub object selection sets.

Methods in the interface passed to objects allow them to add items to the sub-object selection set drop down list. A modifier that wishes to support this capability maintains its list of named sub-object selections. When a user enters the sub-object selection mode, the modifier adds its named selection sets into the drop down (using Interface::AppendSubObjectNamedSelSet()).

Returns

true if the plug-in supports named sub-object selection sets, false otherwise.

Reimplemented from BaseObject.

{return TRUE;}

CoreExport void ActivateSubSelSet ( MSTR &  setName )

virtual

When the user chooses a name from the drop down list this method is called.

The plug-in should respond by selecting the set identified by the name passed.

Parameters

setName

The name of the set to select.

Reimplemented from BaseObject.

CoreExport void NewSetFromCurSel ( MSTR &  setName )

virtual

If the user types a new name into the named selection set drop down then this method is called.

The plug-in should respond by creating a new set and give it the specified name.

Parameters

setName

The name for the selection set.

Reimplemented from BaseObject.

CoreExport void RemoveSubSelSet ( MSTR &  setName )

virtual

If the user selects a set from the drop down and then chooses Remove Named Selections from the Edit menu this method is called.

The plug-in should respond by removing the specified selection set.

Parameters

setName

The selection set to remove.

Reimplemented from BaseObject.

CoreExport void SetupNamedSelDropDown ( )

virtual

To support the Edit Named Selections dialog, plug-ins must implement this method.

It is called to rebuild the named selection set drop down list. This is usually done by calling Interface::ClearSubObjectNamedSelSets() followed by calls to Interface:: AppendSubObjectNamedSelSet().

Reimplemented from BaseObject.

CoreExport int NumNamedSelSets ( )

virtual

To support the Edit Named Selections dialog, plug-ins must implement this method.

Returns

the number of named selection sets.

Reimplemented from BaseObject.

CoreExport MSTR GetNamedSelSetName ( int  i )

virtual

To support the Edit Named Selections dialog, plug-ins must implement this method.

Parameters

i	The index of the selection set whose name is returned.

Returns

the name of the 'i-th' named selection set.

Reimplemented from BaseObject.

CoreExport void SetNamedSelSetName ( int  i, MSTR &  newName  )

virtual

To support the Edit Named Selections dialog, plug-ins must implement this method.

It sets the name of the selection set whose index is passed to the name passed. Note: Developers need to implement Undo / Redo for modifications to their named selection sets.

Parameters

i	The index of the selection set whose name is to be set.
newName	The new name for the selection set the plug-in should store.

Reimplemented from BaseObject.

CoreExport void NewSetByOperator ( MSTR &  newName, Tab< int > &  sets, int  op  )

virtual

To support the Edit Named Selections dialog, plug-ins must implement this method.

The user may bring up the Edit Named Selections dialog via the Edit / Edit Named Selection ... command. This dialog allows the user to create new selection sets using 'boolean' operations to the sets including 'Combine', 'Subtract (A-B)', 'Subtract (B-A)' and 'Intersection'. This method is called on the plug-in to generate a new selection set via one of these operations. This method assumes the developer will append a new seleciton set with the name passed. This will result in two sets with identical names. Then the system will call RemoveSubSelSet() afterwards, so that the first one that is found (the old one, since the new one was appended) will be deleted. Note: Developers need to implement Undo / Redo for modifications to their named selection sets. See /MAXSDK/SAMPLES/MODIFIERS/MESHSEL.CPP for an example.

Parameters

newName	The new name for the selection set is passed here.
sets	A table of the selection sets to operate on. There are sets.Count() sets in the table.
op	One of the following values defined in Arguments for BaseObject::NewSetByOperator()

Reimplemented from BaseObject.

CoreExport BOOL GetUniqueSetName

(

MSTR &

name

)

CoreExport int SelectNamedSet

(

)

CoreExport void NSCopy

(

)

CoreExport void NSPaste

(

)

CoreExport GenericNamedSelSetList& GetSelSet

(

)

CoreExport void RefreshSelType

(

)

CoreExport void SetNumSelLabel

(

)

CoreExport void SetSelDlgEnables

(

)

CoreExport void SetOpsDlgEnables

(

)

CoreExport void SetSurfDlgEnables

(

)

CoreExport void SetSoftSelDlgEnables

(

HWND

hSoftSel = NULL

)

CoreExport int GetAttachMat ( )

virtual

Remarks

Returns the attach material setting. One of the following values:

ATTACHMAT_IDTOMAT

Match material IDs to material.

ATTACHMAT_MATTOID

Match Material to Material IDs.

ATTACHMAT_NEITHER

Do not modify Material IDs or Material.

Implements AttachMatDlgUser.

CoreExport void SetAttachMat ( int  value )

virtual

Remarks

Sets the attach material value.

Parameters:

int value

One of the following values:

ATTACHMAT_IDTOMAT

Match material IDs to material.

ATTACHMAT_MATTOID

Match Material to Material IDs.

ATTACHMAT_NEITHER

Do not modify Material IDs or Material.

Implements AttachMatDlgUser.

CoreExport BOOL GetCondenseMat ( )

virtual

Remarks

Returns the condense material and IDs settings.

Implements AttachMatDlgUser.

CoreExport void SetCondenseMat ( BOOL  sw )

virtual

Remarks

Sets the condense material and IDs setting.

Parameters:

BOOL sw

TRUE for on; FALSE for off.

Implements AttachMatDlgUser.

CoreExport void DoAttach	(	INode *	node,
		PatchMesh *	attPatch,
		bool &	canUndo
	)

CoreExport void SetTessUI	(	HWND	hDlg,
		TessApprox *	tess
	)

CoreExport void DoDeleteSelected

(

BOOL

interactive = TRUE

)

Remarks

This method is available in release 3.0 and later only.

This method will delete the selected patches, exactly like the DeleteMesh modifier does.

Parameters:

BOOL interactive

This parameter is available in release 4.0 and later only.

If this parameter is set to TRUE it will cause the method to display the appropriate prompts, create an undo object, and notifies the dependents.

CoreExport void DoBreak

(

BOOL

interactive = TRUE

)

Remarks

This method is available in release 4.0 and later only.

In vertex mode, this method examines selected vertices, and if any of the vertices that are part of the selection set are used by more than one patch, those vertices (and any attached vectors) are duplicated into separate geometry for each patch using it.

In edge mode, this method examines the selected edges and any vectors on the selected edges that are used by more than one patch are duplicated into separate geometry for each patch using them. Any vertices used by more than one selected edge are duplicated as well for patches on opposite sides of the edge.

Note: If the vertices and vectors involved have controllers attached, they are removed by this operation.

Parameters:

BOOL interactive

If this parameter is set to TRUE it will cause the method to display the appropriate prompts, create an undo object, and notifies the dependents.

CoreExport void ResolveTopoChanges

(

)

CoreExport void DeletePatchParts	(	BitArray &	delVerts,
		BitArray &	delPatches
	)

CoreExport void CreateContArrays

(

)

CoreExport void SynchContArrays

(

)

CoreExport int GetSelMatIndex

(

)

CoreExport void SetSelMatIndex

(

int

index

)

CoreExport void SelectByMat	(	int	index,
		BOOL	clear
	)

CoreExport DWORD GetSelSmoothBits

(

DWORD &

invalid

)

CoreExport DWORD GetUsedSmoothBits

(

)

CoreExport void SelectBySmoothGroup	(	DWORD	bits,
		BOOL	clear
	)

CoreExport void SetSelSmoothBits	(	DWORD	bits,
		DWORD	which
	)

CoreExport void SetPropagate

(

BOOL

sw

)

CoreExport BOOL GetPropagate

(

)

CoreExport void DoPatchAdd

(

int

type

)

CoreExport void DoSubdivide

(

int

level

)

CoreExport void DoPatchDetach	(	int	copy,
		int	reorient
	)

CoreExport void DoVertWeld

(

)

CoreExport void DoVertWeld	(	int	fromVert,
		int	toVert
	)

CoreExport void DoEdgeWeld

(

)

Remarks

This method is available in release 4.0 and later only.

This method will perform the edge weld function on the patch object. Note that this does not take into account any threshold but welds edges only if they use the same two vertices as endpoints. When two or more edges are welded, the locations of the edge vectors are averaged to create the new edge.

CoreExport void StartCopyTangentMode

(

)

CoreExport void StartPasteTangentMode

(

)

CoreExport void StartPasteTangent

(

)

CoreExport void EndPasteTangent

(

)

CoreExport BOOL CopyTangent

(

int

vec

)

CoreExport BOOL PasteTangent

(

int

vec

)

CoreExport void DoHide

(

int

type

)

CoreExport void DoUnHide

(

)

CoreExport void DoPatchHide

(

)

CoreExport void DoVertHide

(

)

CoreExport void DoEdgeHide

(

)

CoreExport void DoAddHook	(	int	vert1,
		int	seg1
	)

CoreExport void DoRemoveHook

(

)

CoreExport void DoExtrude

(

TimeValue

t

)

Remarks

When called with the Animate state active and on a nonzero TimeValue, this method will prepare the controllers for the geometry that is being created. The program can then fill in the animated vertex values later.

Parameters:

TimeValue t

This parameter is available in release 4.0 and later only.

The time at which to prepare and execute the extrude operation.

CoreExport void BeginExtrude

(

TimeValue

t

)

CoreExport void EndExtrude	(	TimeValue	t,
		BOOL	accept = TRUE
	)

CoreExport void Extrude	(	TimeValue	t,
		float	amount,
		BOOL	useLocalNorm
	)

CoreExport void DoFlipNormals

(

int

patchIndex = -1

)

Remarks

This method flips the normals of a specified patch or all selected patches. This method will save undo information and displays a prompt if patchIndex < 0 while there are no patches selected.

Parameters:

int patchIndex

The index of the patch for which to flip the normal. If this parameter is < 0, the normals of all selected patches will be flipped (if there are any selected).

Any vertices set to PVERT_COPLANAR that lie on the boundary between flipped and unflipped patches will have their type set to PVERT_CORNER. This is because attempting to compute normals of neighboring patches with opposite normals in order to get a proper plane often results in invalid normals being generated. Making the vertex a corner type prevents the problem. Any vertices not on the boundary between flipped and unflipped patches are left as is.

CoreExport void DoUnifyNormals

(

)

Remarks

This method is available in release 4.0 and later only.

This method examines the selected patch set and attempts to make them all face the same direction. Preferred direction is arbitrary; the first selected patch encountered in each contiguous group determines the direction all patches in that group will attain.

Any vertices set to PVERT_COPLANAR that lie on the boundary between flipped and unflipped patches will have their type set to PVERT_CORNER. This is because attempting to compute normals of neighboring patches with opposite normals in order to get a proper plane often results in invalid normals being generated. Making the vertex a corner type prevents the problem. Any vertices not on the boundary between flipped and unflipped patches are left as is.

CoreExport void DoBevel

(

TimeValue

t

)

Remarks

When called with the Animate state active and on a nonzero TimeValue, this method will prepare the controllers for the geometry that is being created. The program can then fill in the animated vertex values later.

Parameters:

TimeValue t

This parameter is available in release 4.0 and later only.

The time at which to prepare and execute the bevel operation.

CoreExport void BeginBevel

(

TimeValue

t

)

CoreExport void EndBevel	(	TimeValue	t,
		BOOL	accept = TRUE
	)

CoreExport void Bevel	(	TimeValue	t,
		float	amount,
		BOOL	smoothStart,
		BOOL	smoothEnd
	)

CoreExport void DoPatchSmooth

(

int

type

)

CoreExport void CreateVertex	(	Point3	pt,
		int &	newIndex
	)

CoreExport void CreatePatch	(	int	vertIndx1,
		int	vertIndx2,
		int	vertIndx3
	)

CoreExport void CreatePatch	(	int	vertIndx1,
		int	vertIndx2,
		int	vertIndx3,
		int	vertIndx4
	)

CoreExport void StartCommandMode ( patchCommandMode  mode )

virtual

Remarks

Begins the specified interactive command mode.

Parameters:

patchCommandMode mode

PcmAttach

PcmExtrude

PcmBevel

PcmCreate

PcmWeldTarget

PcmFlipNormal

PcmBind

Implements IPatchOps.

CoreExport void ButtonOp ( patchButtonOp  opcode )

virtual

Remarks

Performs the same operation as a button press inside the Editable Patch UI.

Parameters:

patchButtonOp opcode

The button operation to execute. One of the following values:

PopBind

PopUnbind

PopHide

PopUnhideAll

PopWeld

PopDelete

PopSubdivide

PopAddTri

PopAddQuad

PopDetach

Implements IPatchOps.

CoreExport void GetUIParam ( patchUIParam  uiCode, int &  ret  )

virtual

Remarks

This method is available in release 4.0 and later only.

This method allows you to get the edit patch parameters from the command panel. Currently not in use.

Parameters:

patchUIParam uiCode

This enum is currently empty.

int &ret

The returned value.

Default Implementation:

{ }

Reimplemented from IPatchOps.

CoreExport void SetUIParam ( patchUIParam  uiCode, int  val  )

virtual

Remarks

This method is available in release 4.0 and later only.

This method allows you to set the edit patch parameters from the command panel. Currently not in use.

Parameters:

patchUIParam uiCode

This enum is currently empty.

int val

The value to set.

Default Implementation:

{ }

Reimplemented from IPatchOps.

CoreExport void GetUIParam ( patchUIParam  uiCode, float &  ret  )

virtual

Remarks

This method is available in release 4.0 and later only.

This method allows you to get the edit patch parameters from the command panel. Currently not in use.

Parameters:

patchUIParam uiCode

This enum is currently empty.

float &ret

The returned value.

Default Implementation:

{ }

Reimplemented from IPatchOps.

CoreExport void SetUIParam ( patchUIParam  uiCode, float  val  )

virtual

Remarks

This method is available in release 4.0 and later only.

This method allows you to set the edit patch parameters from the command panel. Currently not in use.

Parameters:

patchUIParam uiCode

This enum is currently empty.

float val

The value to set.

Default Implementation:

{ }

Reimplemented from IPatchOps.

bool Editing ( )

inline

Remarks

This method is available in release 4.0 and later only.

This method will return TRUE if the SplineShape object or Edit Spline modifier is active in the command panel.

Default Implementation:

{ return (ip && (editObj==this)) ? TRUE : FALSE; }

{ return (ip && (editObj==this)) ? TRUE : FALSE; }

CoreExport DWORD GetSelLevel ( )

virtual

Remarks

Returns a value indicating the current selection level of the modifier. One of the following values:

PO_VERTEX

PO_EDGE

PO_PATCH

PO_OBJECT

Implements IPatchSelect.

CoreExport void SetSelLevel ( DWORD  level )

virtual

Remarks

Sets the current level of selection of the modifier.

Parameters:

DWORD level

The level to set. One of the following values:

PO_VERTEX

PO_EDGE

PO_PATCH

PO_OBJECT

Implements IPatchSelect.

CoreExport void LocalDataChanged ( )

virtual

Remarks

This method must be called when the selection level of the modifier is changed. Developers can use the methods of this class to get and set the actual selection data. When a developers does set any of these selection sets this method must be called when done.

Implements IPatchSelect.

CoreExport BitArray GetVecSel ( )

virtual

Implements IPatchSelectData.

CoreExport BitArray GetVertSel ( )

virtual

Remarks

Returns a BitArray that reflects the current vertex selection. There is one bit for each vertex. Bits that are 1 indicate the vertex is selected.

Implements IPatchSelectData.

CoreExport BitArray GetEdgeSel ( )

virtual

Remarks

Returns a BitArray that reflects the current edge selection. There is one bit for each edge. Bits that are 1 indicate the edge is selected.

Implements IPatchSelectData.

CoreExport BitArray GetPatchSel ( )

virtual

Remarks

Returns a BitArray that reflects the current patch selection. There is one bit for each patch. Bits that are 1 indicate the patch is selected.

Implements IPatchSelectData.

CoreExport void SetVecSel ( BitArray &  set, IPatchSelect *  imod, TimeValue  t  )

virtual

Implements IPatchSelectData.

CoreExport void SetVertSel ( BitArray &  set, IPatchSelect *  imod, TimeValue  t  )

virtual

Remarks

Sets the vertex selection of the modifier.

Parameters:

BitArray &set

There is one bit for each vertex. Bits that are 1 indicate the vertex should be selected.

IPatchSelect *imod

Points to the IPatchSelect instance (generally this is a modifier).

TimeValue t

The current time at which the call is made.

Implements IPatchSelectData.

CoreExport void SetEdgeSel ( BitArray &  set, IPatchSelect *  imod, TimeValue  t  )

virtual

Remarks

Sets the edge selection of the modifier.

Parameters:

BitArray &set

There is one bit for each edge. Bits that are 1 indicate the edge should be selected.

IPatchSelect *imod

Points to the IPatchSelect instance (generally this is a modifier).

TimeValue t

The current time at which the call is made.

Implements IPatchSelectData.

CoreExport void SetPatchSel ( BitArray &  set, IPatchSelect *  imod, TimeValue  t  )

virtual

Remarks

Sets the patch selection of the modifier.

Parameters:

BitArray &set

There is one bit for each patch. Bits that are 1 indicate the patch should be selected.

IPatchSelect *imod

Points to the IPatchSelect instance (generally this is a modifier).

TimeValue t

The current time at which the call is made.

Implements IPatchSelectData.

CoreExport GenericNamedSelSetList& GetNamedVecSelList ( )

virtual

Implements IPatchSelectData.

CoreExport GenericNamedSelSetList& GetNamedVertSelList ( )

virtual

Remarks

Returns a reference to a class used for manipulating the lists of vertex level named selection sets associated with this modifier.

Implements IPatchSelectData.

CoreExport GenericNamedSelSetList& GetNamedEdgeSelList ( )

virtual

Remarks

Returns a reference to a class used for manipulating the lists of edge level named selection sets associated with this modifier.

Implements IPatchSelectData.

CoreExport GenericNamedSelSetList& GetNamedPatchSelList ( )

virtual

Remarks

Returns a reference to a class used for manipulating the lists of patch level named selection sets associated with this modifier.

Implements IPatchSelectData.

CoreExport Color GetVertColor	(	int	mp = 0,
		bool *	differs = NULL
	)

Remarks

This method is available in release 4.0 and later only.

This method returns the common color for all selected vertices. If no vertices are selected then white (1,1,1) will be returned, however, if multiple vertices with different colors are selected, then black (0,0,0) will be returned.

Parameters:

int mp=0

The map channel.

bool *differs=NULL

This parameter is returned to indicate if there were any differences.

CoreExport void SetVertColor	(	Color	clr,
		int	mp = 0
	)

Remarks

This method is available in release 4.0 and later only.

This method will set all selected vertices to the specified color.

Parameters:

Color clr

The color you wish to apply to all the selected vertices.

int mp=0

The map channel.

CoreExport void SelectVertByColor	(	VertColor	clr,
		int	deltaR,
		int	deltaG,
		int	deltaB,
		BOOL	add,
		BOOL	sub,
		int	mp = 0
	)

Remarks

This method is available in release 4.0 and later only.

This method will select all vertices which fall into a specified color range.

Parameters:

VertColor clr

The starting color of the vertices you wish to select by color.

int deltaR

The difference range for the red color component.

int deltaG

The difference range for the green color component.

int deltaB

The difference range for the blue color component.

BOOL add

This flag adds vertices to the selection that fall into the color range.

BOOL sub

This flag subtracts vertices from the selection that fall into the color range.

int mp=0

The map channel.

CoreExport Color GetPatchColor	(	int	mp = 0,
		bool *	differs = NULL
	)

Remarks

This method is available in release 4.0 and later only.

This method returns the common color for all selected patches. If no patches are selected then white (1,1,1) will be returned, however, if different vertex colors are present in the selected patches, then black (0,0,0) will be returned.

Parameters:

int mp=0

The map channel.

bool *differs=NULL

This parameter is returned to indicate if there were any differences.

CoreExport void SetPatchColor	(	Color	clr,
		int	mp = 0
	)

Remarks

This method is available in release 4.0 and later only.

This method will set all selected patches to the specified color.

Parameters:

Color clr

The color you wish to apply to all the selected patches.

int mp=0

The map channel.

CoreExport MtlID GetNextAvailMtlID ( ModContext *  mc )

virtual

Remarks

This method returns a material ID that is currently not used by the object. If the current face selection share one single MtlDI that is not used by any other faces, you should use it.

Implements ISubMtlAPI.

CoreExport BOOL HasFaceSelection ( ModContext *  mc )

virtual

Remarks

This method indicates if you are active in the modifier panel and have an active face selection. Return TRUE if so, otherwise FALSE.

Implements ISubMtlAPI.

CoreExport void SetSelFaceMtlID ( ModContext *  mc, MtlID  id, BOOL  bResetUnsel = FALSE  )

virtual

Remarks

This method sets the selected faces to the specified material ID..

Parameters:

MtlID id

The material id to set for the selected faces.

BOOL bResetUnsel = FALSE

If TRUE, then you should set the remaining unselected face material IDs to 0.

Implements ISubMtlAPI.

CoreExport int GetSelFaceUniqueMtlID ( ModContext *  mc )

virtual

Remarks

This method returns the material ID of the selected face(s). If multiple faces are selected they should all have the same MtlID – otherwise you should return -1. If faces other than the selected share the same material ID, then return -1.

Implements ISubMtlAPI.

CoreExport int GetSelFaceAnyMtlID ( ModContext *  mc )

virtual

Remarks

This method returns the material ID of the selected face(s). If multiple faces are selected they should all have the same MtlID, otherwise return -1.

Implements ISubMtlAPI.

CoreExport int GetMaxMtlID ( ModContext *  mc )

virtual

Remarks

This method returns the highest MtlID on the object.

Implements ISubMtlAPI.

CoreExport void ChangeMappingTypeLinear

(

BOOL

linear

)

Remarks

This method is available in release 4.0 and later only.

This method will change the mapping type of the selected patches to linear or curved.

Parameters:

BOOL linear

If TRUE the mapping type will be changed to linear. FALSE will change the mapping type to curved.

CoreExport void ShrinkSelection

(

int

type

)

CoreExport void GrowSelection

(

int

type

)

CoreExport void SelectEdgeRing

(

)

CoreExport void SelectEdgeLoop

(

)

CoreExport void SelectOpenEdges

(

)

Remarks

This method is available in release 4.0 and later only.

This method examines the patch mesh and selects any edges used by only one single patch.

CoreExport void DoCreateShape

(

)

Remarks

This method is available in release 4.0 and later only.

This method will create a bezier spline shape from the selected edges of the patch mesh. Each edge will become a separate spline in the output shape. The user will be prompted to enter a name for the new editable spline object that will be created.

CoreExport int UseEdgeDists

(

)

CoreExport void SetUseEdgeDists

(

int

useSoftSelections

)

CoreExport int UseSoftSelections

(

)

CoreExport void SetUseSoftSelections

(

int

useSoftSelections

)

CoreExport void InvalidateVertexWeights

(

)

CoreExport void ToggleShadedFaces

(

)

CoreExport void UpdateVertexDists

(

)

CoreExport void UpdateEdgeDists

(

)

CoreExport void UpdateVertexWeights

(

)

CoreExport Point3 VertexNormal

(

int

vIndex

)

Friends And Related Function Documentation

friend class PatchObjectRestore

friend

friend class POXFormProc

friend

friend class POPickPatchAttach

friend

Member Data Documentation

HWND hSelectPanel

static

HWND hOpsPanel

static

HWND hSurfPanel

static

HWND hSoftSelPanel

static

BOOL rsSel

static

BOOL rsOps

static

BOOL rsSurf

static

MoveModBoxCMode* moveMode

static

RotateModBoxCMode* rotMode

static

UScaleModBoxCMode* uscaleMode

static

NUScaleModBoxCMode* nuscaleMode

static

SquashModBoxCMode* squashMode

static

SelectModBoxCMode* selectMode

static

EP_BindCMode* bindMode

static

EP_ExtrudeCMode* extrudeMode

static

EP_NormalFlipCMode* normalFlipMode

static

EP_BevelCMode* bevelMode

static

EP_CreateVertCMode* createVertMode

static

EP_CreatePatchCMode* createPatchMode

static

EP_VertWeldCMode* vertWeldMode

static

EP_CopyTangentCMode* copyTangentMode

static

EP_PasteTangentCMode* pasteTangentMode

static

BOOL settingViewportTess

static

BOOL settingDisp

static

ISpinnerControl* uSpin

static

ISpinnerControl* vSpin

static

ISpinnerControl* edgeSpin

static

ISpinnerControl* angSpin

static

ISpinnerControl* distSpin

static

ISpinnerControl* mergeSpin

static

ISpinnerControl* matSpin

static

ISpinnerControl* matSpinSel

static

ISpinnerControl* weldSpin

static

ISpinnerControl* targetWeldSpin

static

ISpinnerControl* stepsSpin

static

ISpinnerControl* stepsRenderSpin

static

ISpinnerControl* relaxSpin

static

ISpinnerControl* relaxIterSpin

static

POPickPatchAttach pickCB

static

BOOL patchUIValid

static

BOOL opsUIValid

static

int attachMat

static

BOOL condenseMat

static

int pickBoxSize

static

int weldBoxSize

static

int loadRefVersion

Interval geomValid

Interval topoValid

Interval texmapValid

Interval selectValid

ChannelMask validBits

IObjParam* ip

static

PatchObject* editObj

static

PatchMesh patch

int patchSelSubType

MasterPointControl* masterCont

Tab<Control*> vertCont

Tab<Control*> vecCont

PatchMesh* rememberedPatch

int rememberedIndex

int rememberedData

BOOL doingHandles

BOOL showMesh

BOOL propagate

BOOL inExtrude

BOOL inBevel

BOOL inPatchCreate

DWORD epFlags

BOOL copyTanLength

BOOL tangentCopied

Point3 copiedTangent

GenericNamedSelSetList hselSet

GenericNamedSelSetList vselSet

GenericNamedSelSetList eselSet

GenericNamedSelSetList pselSet

SingleRefMakerPatchNode* noderef

SingleRefMakerPatchMtl* mtlref