Calculations of the Provided (Real) Reinforcement Area

In this tutorial, you learn how to calculate the provided reinforcement area for the defined plate. Also, you learn how to modify the reinforcement area due to exceeding the deflection.

This tutorial should take about 25 minutes.
The final bottom reinforcement in the X direction is shown below.

Click here to start this tutorial.

Tasks list:

  1. Set calculation options - provided reinforcement
    Learn how to set the calculation options and how to start the calculations of the provided reinforcement area.
  2. Verify the deflection for the provided reinforcement
    Learn how to verify the deflection for the provided reinforcement.
  3. Modify the provided reinforcement
    Learn how to modify the provided reinforcement area due to exceeding the deflection.
  4. Verify the deflection for new reinforcement areas
    Learn how to verify the deflection of newly created reinforcement areas.
  5. Display the final reinforcement and drawings
    Learn how to display the final reinforcement in the view and in tabular form.
  6. Summary
    Congratulations! You have completed this tutorial.
Parent topic: Tutorials: Plate Design