Tolerance Advisor Messages
List and explanation of Tolerance Advisor browser messages.
Topics in this section
Datum object is missing
Dimension reference feature is not valid
DRF failed
DRF is invalid
DRF is not referenced
DRF may have poor repeatability
DRF referenced is not valid
DRF specification is incomplete
Failed objects in the model
Form tolerance value must be smaller
Form is not fully constrained
Gage size does not fall within the feature extents
GCS is not valid for the feature/DRF combination
Geometry references not valid
Geometric tolerance is over-constraining
System of units not compatible with tolerancing standard
Insufficient opposing region to be a feature of size
Location not fully constrained
Model contains external annotation elements
Not all part DOF are constrained
Primary datum feature may be too small
Projected Tolerance Zone value must be greater than zero
One or more surfaces are unconstrained
Orientation is not fully constrained
Orientation of secondary datum is not allowed
Orientation of tertiary datum is not allowed
Pattern is not valid
Should be set as a datum feature or reordered
Size is not fully constrained
Target reference is missing
Tolerance Feature Failed
Tolerance Feature and modeling occurrence count do not match
Tolerance feature shares faces
Tolerance specification is incomplete
Tolerance value must be smaller than preceding value
Tolerance on subfeature must be smaller than related tolerance
Unequally Disposed profile value not within valid range
Unspecified tolerances for some dimensions
Zero-value (or inconsistent) tolerance not allowed
Parent topic:
About 3D Annotation and Model-Based Definition