Use a Wall tool to create a non-bearing wall or a structural wall in the building model.
Non-bearing walls: Click
(Wall: Architectural) on the
Architecture tabBuild panelWall drop-down
Structure tabStructure panelWall drop-down
Structural walls: Click
(Wall: Structural) on the
Architect tabBuild panelWall drop-down
Structure tabStructure panelWall drop-down
Topics in this section
About Walls
Like other basic elements in a building model, walls are instances of predefined system family types, which represent standard varieties of wall function, composition, and thickness.
Place a Wall
Add one or more instances of a specific type of architectural wall to the building model.
Place a Slanted Wall
Add one or more instances of a slanted wall to the building model.
Place a Tapered Wall
Add one or more instances of a tapered wall to the building model.
Attach Walls to Other Elements
After placing a wall, you can override its initial top and base constraints by attaching its top or base to another element in the same vertical plane. By attaching a wall to another element, you avoid the need to manually edit the wall profile when the design changes.
Edit a Wall Profile
In most cases, when you place a straight wall, it has a rectangular profile when viewed in elevations looking perpendicular to its length. If your design calls for a different shape of profile, or for openings in the wall, you can edit the wall’s elevation profile in a section view or an elevation view.
Change the Wall Type
When you create a wall, you specify its type. You can also change the type for an existing wall at any time.
Best Practices: Walls
When adding walls, follow these best practices for successful modeling and to improve productivity.
Wall Joins
When walls intersect, Revit creates a butt join by default and cleans up the display in plan view, removing visible edges between the joined walls and their corresponding component layers.
Compound Walls
You can modify a wall type to define the structure of vertically compound walls using layers or regions.
Stacked Walls
You can model stacked walls, composed of 2 or more subwalls stacked on top of each other.
Wall Sweeps
Use the Sweep tool to add a baseboard, crown molding, or other type of decorative horizontal or vertical projection to a wall. You can add a wall sweep to a wall from a 3D or elevation view.
Wall Reveals
Use the Reveal tool to add a decorative horizontal or vertical cutout to a wall in an elevation or 3D view.
Wall Instance Properties
Change wall instance properties to modify its location line, base and top constraints, height, and more.
Wall Type Properties
Change wall type properties to modify its structure, wrapping behavior, function, and more.