Some XBUILD reserved words have no equivalent in PMOPT. However these are available as PMOPT user-defined parameters:
|
XBUILD reserved word |
PMOPT user-defined parameter |
|
<P1> |
udp_P1 |
|
<P2> |
udp_P2 |
|
… |
… |
|
<P100> |
udp_P100 |
|
<FIXTURE> |
udp_FIXTURE |
Note: Some PMOPT capabilities are not supported by
XBUILD. For example,
XBUILD supports much wider variety of NC output for 2-axis milling than is currently unavailable in PMOPT. So if you choose PMOPT you lose such control of your NC code. PMOPT files do not support Turning and Wire EDM.