Applies to 2020.2 Update and later

Arranging and modifying slice stacks

Changing position, orientation, and scale

Note: Most, if not all tasks here require that a Slices section in the project tree, or any of the slice stacks within, is selected to have access to the necessary menu options.

Jump to:

To move a slice stack
To rotate a slice stack
To scale a slice stack
To mirror a slice stack
To duplicate a slice stack

To move a slice stack

Select the slice to move.
From the main menu, select Move.
Provide the numbers depending on distance and direction, or use any of the buttons for a number of preset movements.
Click the Translate button.

Top

To rotate a slice stack

Select the slice to rotate.
From the main menu, select Rotate.
Provide numbers for rotational angle (or use any of the presets) as well as location of the pivot, if necessary.
Click the Rotate button.

Top

To scale a slice stack

Select the slice to scale.
From the main menu, select Scale.
Provide the numbers for scaling as well as scaling center, if necessary.
Click the Scale button.

Top

To mirror a slice stack

Select the slice to scale.
From the main menu, select Mirror.
Specify the axis about which to mirror, and adjust the offset of the mirroring axis against the global coordinates, if necessary,
Click the Mirror button.

Top

To duplicate a slice stack

Select the slice to scale.
From the main menu, select Duplicate.
Specify count and arrangement as necessary.
Click the Duplicate button.

Top