Topics in this section
- *ADDP: ADD Patran Output Format
- *AGPT: output area ghost part
Enables export of an area-complement ghost part STL file - *AVTK: ASCII VTK Results
- *BINA: Binary Results Output Switch
- *CAS1
- *CGPT: output-temperature-controlled ghost part
Enables generation and export to STL file of a dummy part that adds or inflates dwell time - *CGPP: output-temperature-controlled ghost part, part only
Modifies *CGPT to ignore temperatures in support material - *DCTL: perform *DCTR control in a line-shaped region
Optimize for the localized maximum temperature in a line-shaped region instead of a global maximum - *DCTR: iterative dwell control for global max temperature
Controls inter-pass dwell time to achieve a target maximum temperature - *DEPE: Dependent Analysis File Prefix
- *ENSA: Ensight ASCII File Output Format
- *ENSF
- *ENSI: Ensight File Output Format
- *INPU: Input Neutral File Name
- *INTA: Write All Peak Temperature Increments
- *LFUS: Lack of Fusion
- *MLAS: Multiple Laser warning suppression
Suppresses the warnings issued when more than one simultaneous heat source is activated as is the case for DED and LPBF systems with multiple lasers or heat sources. - *ODTX: Output thermal gradients
- *ODTP: Peak thermal gradient result
Accumulates the maximum thermal gradient over all time steps - *OFLX: Output Heat Flux
- *OFNS: Output File Number Size
- *OOPP: Output Only Post Processing Increments
- *ORES: Output to Restart Files
- *OSID: STL ID output
Enables writing the STL ID results to mesh preview and transient results files - *OSIF: STL ID fine output
Enables writing of the STL ID results to the fine global results files - *OMAT: Material ID output
Include material ID in CASE file - *OVTK: Output VTK Results
- *OWFC: Output Write File Frequency
- *POOL: Output Melt Pool Volume
- *POO2: Output Melt Pool Volume Version Control
- *PVOX: export power in BINVOX
Modifies *TCTP to write output to voxel file format instead of EnSight case file format - *PZIP: Pan ZIP results
Discretizes and compresses results during simulation - *REST: Restart File
- *STAT: Orientation Optimization Statistics Export
- *STYF: Structure Type Fine output
Enables writing of the structure type results to the fine global results files - *STYP: Structure Type Output
Enables writing of the structure type results to the transient results files - *TCPS: scaling factor for *TCTP power optimization
Scale calculated theoretical power values into more realistic ranges - *TCTP: part-level iterative power control for interlayer temperature
Generates and iteratively optimizes a volumetric map of laser power to achieve a target interlayer temperature - *TCTR: iterative power control for global max temperature
Controls power to achieve a target maximum temperature. - *TITL: Header Line
- *TPRE: Temperature Previous to Heating
- *VCTR: Melt pool volume control
Generates and iteratively optimizes per-vector laser power values for moving-source simulations - *WRTU: Write Displacements
- Part-Level Stress Output
Parent topic: Keyword Listing