To Specify Cleanup Settings for a Railing

Use this procedure to specify the cleanup settings for a railing in display representations used for model views.

1. Double-click the railing.
2. On the Properties palette, click the Display tab.
3. Under the General category, for Display component, verify that *NONE* is selected.
4. For Display controlled by, select This object.
   Note: To apply your changes to all railings in the drawing, select Drawing default setting. To apply changes to all railings of this style, select Railing Style:<style name>.
5. For Display representation, verify that the desired display representation is selected.
6. If necessary, expand Object Display Properties Advanced, and click Cleanup properties.
7. Specify whether you want to disable the cleanup of rails at post.
8. Specify whether you want to disable the cleanup of balusters at rails.
9. Click OK.

You can also access and modify the same cleanup settings through the railing’s context menu, as follows:

1. Select the railing you want to change, right-click, and click Edit Object Display.
2. Click the Display Properties tab.
3. Select the desired display representation, and select Object Override.

   The display representation in bold is the current display representation.

4. If necessary, click .
5. Click the Other tab.
6. Under Cleanup, adjust the settings as desired, and click OK twice.