EPolyMod Class Reference

This class is the published interface for Edit Poly modifiers. More...

#include <iEPolyMod.h>

Inheritance diagram for EPolyMod:

Public Member Functions
	FN_0 (epmod_get_sel_level, TYPE_ENUM, GetEPolySelLevel)
	FN_0 (epmod_get_mn_sel_level, TYPE_ENUM, GetMNSelLevel)
	VFN_1 (epmod_set_sel_level, SetEPolySelLevel, TYPE_ENUM)
	FN_3 (epmod_convert_selection, TYPE_INT, EpModConvertSelection, TYPE_ENUM, TYPE_ENUM, TYPE_bool)
	FN_0 (epmod_get_operation, TYPE_ENUM, GetPolyOperationID)
	VFN_1 (epmod_set_operation, EpModSetOperation, TYPE_ENUM)
	VFN_1 (epmod_popup_dialog, EpModPopupDialog, TYPE_ENUM)
	VFN_1 (epmod_button_op, EpModButtonOp, TYPE_ENUM)
	VFN_0 (epmod_repeat_last, EpModRepeatLast)
	VFNT_0 (epmod_commit, EpModCommit)
	VFNT_0 (epmod_commit_unless_animating, EpModCommitUnlessAnimating)
	VFNT_0 (epmod_commit_and_repeat, EpModCommitAndRepeat)
	VFN_0 (epmod_cancel_operation, EpModCancel)
	FN_2 (epmod_get_selection, TYPE_BITARRAY, EpModGetSelection, TYPE_ENUM, TYPE_INODE)
	FN_3 (epmod_set_selection, TYPE_bool, EpModSetSelection, TYPE_ENUM, TYPE_BITARRAY_BR, TYPE_INODE)
	FN_5 (epmod_select, TYPE_bool, EpModSelect, TYPE_ENUM, TYPE_BITARRAY_BR, TYPE_bool, TYPE_bool, TYPE_INODE)
	VFN_1 (epmod_set_primary_node, EpModSetPrimaryNode, TYPE_INODE)
	VFN_1 (epmod_toggle_command_mode, EpModToggleCommandMode, TYPE_ENUM)
	VFN_1 (epmod_enter_command_mode, EpModEnterCommandMode, TYPE_ENUM)
	FN_0 (epmod_get_command_mode, TYPE_ENUM, EpModGetCommandMode)
	VFN_1 (epmod_enter_pick_mode, EpModEnterPickMode, TYPE_ENUM)
	FN_0 (epmod_get_pick_mode, TYPE_ENUM, EpModGetPickMode)
	VFNT_4 (epmod_move_selection, EpModMoveSelection, TYPE_POINT3_BR, TYPE_MATRIX3_BR, TYPE_MATRIX3_BR, TYPE_BOOL)
	VFNT_4 (epmod_rotate_selection, EpModRotateSelection, TYPE_QUAT_BR, TYPE_MATRIX3_BR, TYPE_MATRIX3_BR, TYPE_BOOL)
	VFNT_4 (epmod_scale_selection, EpModScaleSelection, TYPE_POINT3_BR, TYPE_MATRIX3_BR, TYPE_MATRIX3_BR, TYPE_BOOL)
	VFNT_3 (epmod_move_slicer, EpModMoveSlicePlane, TYPE_POINT3_BR, TYPE_MATRIX3_BR, TYPE_MATRIX3_BR)
	VFNT_4 (epmod_rotate_slicer, EpModRotateSlicePlane, TYPE_QUAT_BR, TYPE_MATRIX3_BR, TYPE_MATRIX3_BR, TYPE_BOOL)
	VFNT_4 (epmod_scale_slicer, EpModScaleSlicePlane, TYPE_POINT3_BR, TYPE_MATRIX3_BR, TYPE_MATRIX3_BR, TYPE_BOOL)
	FN_0 (epmod_in_slice_mode, TYPE_bool, EpInSliceMode)
	VFN_0 (epmod_reset_slice_plane, EpResetSlicePlane)
	FNT_0 (epmod_get_slice_plane_tm, TYPE_MATRIX3_BV, EpGetSlicePlaneTM)
	VFNT_2 (epmod_get_slice_plane, EpGetSlicePlane, TYPE_POINT3_BR, TYPE_POINT3_BR)
	VFNT_2 (epmod_set_slice_plane, EpSetSlicePlane, TYPE_POINT3_BR, TYPE_POINT3_BR)
	FN_2 (epmod_create_vertex, TYPE_INDEX, EpModCreateVertex, TYPE_POINT3, TYPE_INODE)
	FN_2 (epmod_create_face, TYPE_INDEX, EpModCreateFace, TYPE_INDEX_TAB, TYPE_INODE)
	FN_3 (epmod_create_edge, TYPE_INDEX, EpModCreateEdge, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	VFN_3 (epmod_set_diagonal, EpModSetDiagonal, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	VFN_5 (epmod_cut, EpModCut, TYPE_ENUM, TYPE_INDEX, TYPE_POINT3, TYPE_POINT3, TYPE_INODE)
	VFN_3 (epmod_target_weld_vertex, EpModWeldVerts, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	VFN_3 (epmod_target_weld_edge, EpModWeldEdges, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	VFNT_2 (epmod_attach_node, EpModAttach, TYPE_INODE, TYPE_INODE)
	VFNT_2 (epmod_attach_nodes, EpModMultiAttach, TYPE_INODE_TAB_BR, TYPE_INODE)
	VFNT_1 (epmod_detach_to_object, EpModDetachToObject, TYPE_TSTR_BR)
	VFNT_1 (epmod_create_shape, EpModCreateShape, TYPE_TSTR_BR)
	VFN_3 (epmod_set_hinge_edge, EpModSetHingeEdge, TYPE_INDEX, TYPE_MATRIX3, TYPE_INODE)
	FN_1 (epmod_get_hinge_edge, TYPE_INDEX, EpModGetHingeEdge, TYPE_INODE)
	VFN_3 (epmod_bridge_borders, EpModBridgeBorders, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	VFN_3 (epmod_bridge_polygons, EpModBridgePolygons, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	FN_0 (epmod_get_bridge_node, TYPE_INODE, EpModGetBridgeNode)
	VFN_1 (epmod_set_bridge_node, EpModSetBridgeNode, TYPE_INODE)
	FN_0 (epmod_ready_to_bridge_selected, TYPE_bool, EpModReadyToBridgeSelected)
	FN_1 (epmod_get_preserve_map, TYPE_bool, EpModGetPreserveMap, TYPE_INT)
	VFN_2 (epmod_set_preserve_map, EpModSetPreserveMap, TYPE_INT, TYPE_bool)
	VFN_3 (epmod_turn_diagonal, EpModTurnDiagonal, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	FN_1 (epmod_get_num_vertices, TYPE_INT, EpMeshGetNumVertices, TYPE_INODE)
	FN_2 (epmod_get_vertex, TYPE_POINT3_BV, EpMeshGetVertex, TYPE_INDEX, TYPE_INODE)
	FN_2 (epmod_get_vertex_face_count, TYPE_INT, EpMeshGetVertexFaceCount, TYPE_INDEX, TYPE_INODE)
	FN_3 (epmod_get_vertex_face, TYPE_INDEX, EpMeshGetVertexFace, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	FN_2 (epmod_get_vertex_edge_count, TYPE_INT, EpMeshGetVertexEdgeCount, TYPE_INDEX, TYPE_INODE)
	FN_3 (epmod_get_vertex_edge, TYPE_INDEX, EpMeshGetVertexEdge, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	FN_1 (epmod_get_num_edges, TYPE_INT, EpMeshGetNumEdges, TYPE_INODE)
	FN_3 (epmod_get_edge_vertex, TYPE_INDEX, EpMeshGetEdgeVertex, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	FN_3 (epmod_get_edge_face, TYPE_INDEX, EpMeshGetEdgeFace, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	FN_1 (epmod_get_num_faces, TYPE_INT, EpMeshGetNumFaces, TYPE_INODE)
	FN_2 (epmod_get_face_degree, TYPE_INT, EpMeshGetFaceDegree, TYPE_INDEX, TYPE_INODE)
	FN_3 (epmod_get_face_vertex, TYPE_INDEX, EpMeshGetFaceVertex, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	FN_3 (epmod_get_face_edge, TYPE_INDEX, EpMeshGetFaceEdge, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	FN_4 (epmod_get_face_diagonal, TYPE_INDEX, EpMeshGetFaceDiagonal, TYPE_INDEX, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	FN_2 (epmod_get_face_material, TYPE_INDEX, EpMeshGetFaceMaterial, TYPE_INDEX, TYPE_INODE)
	FN_2 (epmod_get_face_smoothing_group, TYPE_DWORD, EpMeshGetFaceSmoothingGroup, TYPE_INDEX, TYPE_INODE)
	FN_1 (epmod_get_num_map_channels, TYPE_INT, EpMeshGetNumMapChannels, TYPE_INODE)
	FN_2 (epmod_get_map_channel_active, TYPE_bool, EpMeshGetMapChannelActive, TYPE_INT, TYPE_INODE)
	FN_2 (epmod_get_num_map_vertices, TYPE_INT, EpMeshGetNumMapVertices, TYPE_INT, TYPE_INODE)
	FN_3 (epmod_get_map_vertex, TYPE_POINT3_BV, EpMeshGetMapVertex, TYPE_INT, TYPE_INDEX, TYPE_INODE)
	FN_4 (epmod_get_map_face_vertex, TYPE_INDEX, EpMeshGetMapFaceVertex, TYPE_INT, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	VFN_1 (epmod_list_operations, EpModListOperations, TYPE_INODE)
	VFN_1 (epmod_local_data_changed, EpModLocalDataChanged, TYPE_DWORD)
	VFN_0 (epmod_refresh_screen, EpModRefreshScreen)
	FN_0 (epmod_in_slice, TYPE_bool, EpInSlice)
	FN_0 (epmod_show_operation_dialog, TYPE_bool, EpModShowOperationDialog)
	FN_0 (epmod_showing_operation_dialog, TYPE_bool, EpModShowingOperationDialog)
	VFN_0 (epmod_close_operation_dialog, EpModCloseOperationDialog)
	FN_0 (epmod_get_primary_node, TYPE_INODE, EpModGetPrimaryNode)
	FNT_1 (epmod_get_node_tm, TYPE_MATRIX3_BV, EpModGetNodeTM_FPS, TYPE_INODE)
	VFN_2 (epmod_set_cut_end, EpModSetCutEnd, TYPE_POINT3, TYPE_INODE)
	FN_0 (epmod_get_last_cut_end, TYPE_INDEX, EpModGetLastCutEnd)
	VFN_0 (epmod_clear_last_cut_end, EpModClearLastCutEnd)
	VFN_1 (epmod_cut_cancel, EpModCutCancel, TYPE_INODE)
	VFN_3 (epmod_divide_edge, EpModDivideEdge, TYPE_INDEX, TYPE_FLOAT, TYPE_INODE)
	VFN_3 (epmod_divide_face, EpModDivideFace, TYPE_INDEX, TYPE_FLOAT_TAB, TYPE_INODE)
	VFN_3 (epmod_bridge_edges, EpModBridgeEdges, TYPE_INDEX, TYPE_INDEX, TYPE_INODE)
	VFN_3 (epmod_ring_sel, EpModSetRingShift, TYPE_INT, TYPE_bool, TYPE_bool)
	VFN_3 (epmod_loop_sel, EpModSetLoopShift, TYPE_INT, TYPE_bool, TYPE_bool)
	FN_2 (epmod_convert_selection_to_border, TYPE_INT, EpModConvertSelectionToBorder, TYPE_ENUM, TYPE_ENUM)
	VFN_0 (epmod_paintdeform_commit, EpModPaintDeformCommit)
	VFN_0 (epmod_paintdeform_cancel, EpModPaintDeformCancel)
	FN_2 (epmod_get_face_normal, TYPE_POINT3_BV, EPMeshGetFaceNormal, TYPE_INDEX, TYPE_INODE)
	FN_2 (epmod_get_face_center, TYPE_POINT3_BV, EPMeshGetFaceCenter, TYPE_INDEX, TYPE_INODE)
	FN_2 (epmod_get_face_area, TYPE_FLOAT, EPMeshGetFaceArea, TYPE_INDEX, TYPE_INODE)
	FN_1 (epmod_get_open_edges, TYPE_BITARRAY, EPMeshGetOpenEdges, TYPE_INODE)
	FN_4 (epmod_get_verts_by_flag, TYPE_bool, EPMeshGetVertsByFlag, TYPE_BITARRAY_BR, TYPE_DWORD, TYPE_DWORD, TYPE_INODE)
	FN_4 (epmod_get_edges_by_flag, TYPE_bool, EPMeshGetEdgesByFlag, TYPE_BITARRAY_BR, TYPE_DWORD, TYPE_DWORD, TYPE_INODE)
	FN_4 (epmod_get_faces_by_flag, TYPE_bool, EPMeshGetFacesByFlag, TYPE_BITARRAY_BR, TYPE_DWORD, TYPE_DWORD, TYPE_INODE)
	VFN_5 (epmod_set_vertex_flags, EPMeshSetVertexFlags, TYPE_BITARRAY_BR, TYPE_DWORD, TYPE_DWORD, TYPE_bool, TYPE_INODE)
	VFN_5 (epmod_set_edge_flags, EPMeshSetEdgeFlags, TYPE_BITARRAY_BR, TYPE_DWORD, TYPE_DWORD, TYPE_bool, TYPE_INODE)
	VFN_5 (epmod_set_face_flags, EPMeshSetFaceFlags, TYPE_BITARRAY_BR, TYPE_DWORD, TYPE_DWORD, TYPE_bool, TYPE_INODE)
	FN_2 (epmod_get_vertex_flags, TYPE_INT, EPMeshGetVertexFlags, TYPE_INDEX, TYPE_INODE)
	FN_2 (epmod_get_edge_flags, TYPE_INT, EPMeshGetEdgeFlags, TYPE_INDEX, TYPE_INODE)
	FN_2 (epmod_get_face_flags, TYPE_INT, EPMeshGetFaceFlags, TYPE_INDEX, TYPE_INODE)
	VFN_3 (epmod_get_verts_using_edge, EPMeshGetVertsUsingEdge, TYPE_BITARRAY_BR, TYPE_BITARRAY_BR, TYPE_INODE)
	VFN_3 (epmod_get_edges_using_vert, EPMeshGetEdgesUsingVert, TYPE_BITARRAY_BR, TYPE_BITARRAY_BR, TYPE_INODE)
	VFN_3 (epmod_get_faces_using_edge, EPMeshGetFacesUsingEdge, TYPE_BITARRAY_BR, TYPE_BITARRAY_BR, TYPE_INODE)
	VFN_4 (epmod_get_elements_using_face, EPMeshGetElementsUsingFace, TYPE_BITARRAY_BR, TYPE_BITARRAY_BR, TYPE_BITARRAY_BR, TYPE_INODE)
	VFN_3 (epmod_get_faces_using_vert, EPMeshGetFacesUsingVert, TYPE_BITARRAY_BR, TYPE_BITARRAY_BR, TYPE_INODE)
	VFN_3 (epmod_get_verts_using_face, EPMeshGetVertsUsingFace, TYPE_BITARRAY_BR, TYPE_BITARRAY_BR, TYPE_INODE)
	VFN_3 (epmod_set_vert, EPMeshSetVert, TYPE_BITARRAY_BR, TYPE_POINT3_BR, TYPE_INODE)
	VFN_0 (epmod_smgrp_floater, SmGrpFloater)
	FN_0 (epmod_smgrp_floatervisible, TYPE_BOOL, SmGrpFloaterVisible)
	VFN_0 (epmod_matid_floater, MatIDFloater)
	FN_0 (epmod_matid_floatervisible, TYPE_BOOL, MatIDFloaterVisible)
	VFN_0 (epmod_list_delta_ops, ListDeltaOps)
	FN_0 (epmod_get_last, TYPE_INT, EpModGetLast)
FPInterfaceDesc *	GetDesc ()
	For system use only - retrieves the function publishing interface description. More...
virtual int	GetEPolySelLevel ()=0
	Returns the Edit Poly selection level - one of the ePolyModSelLevel enum defined above, such as EPM_SL_VERTEX. More...
virtual int	GetMNSelLevel ()=0
	Returns the MNMesh selection level - one of MNM_SL_OBJECT, MNM_SL_VERTEX, MNM_SL_EDGE, or MNM_SL_FACE. More...
virtual void	SetEPolySelLevel (int sl)=0
	Sets the Edit Poly selection level. More...
virtual int	EpModConvertSelection (int epSelLevelFrom, int epSelLevelTo, bool requireAll)
	Converts selection between two Edit Poly selection levels, by selecting adjacent subobjects, such as edges using selected vertices, or vertices used by selected faces, etc. More...
virtual int	GetPolyOperationID ()
	Returns the "current" Edit Poly operation. More...
virtual IParamBlock2 *	getParamBlock ()
	Returns the parameter block for the Edit Poly modifier. More...
virtual MapBitArray	GetPreserveMapSettings () const
	Returns the Preserve settings for all map channels. More...
virtual void	SetPreserveMapSettings (const MapBitArray &mapSettings)
	Sets the Preserve settings for all map channels. More...
virtual void	EpModSetPreserveMap (int mapChannel, bool preserve)
	Sets whether a particular map channel will be "preserved" in geometric operations. More...
virtual bool	EpModGetPreserveMap (int mapChannel)
	Indicates whether a particular map channel is set to be "preserved" in geometric operations. More...
virtual void	InvalidateDistanceCache ()
	Invalidates the computed distances from selected vertices that are used to generate soft selections. More...
virtual void	InvalidateSoftSelectionCache ()
	Invalidates the computed soft selections (but not the distances from selected vertices that the soft selections are based on). More...
virtual void	EpModSetOperation (int opcode)
	Sets the current operation. More...
virtual void	EpModPopupDialog (int opcode)
	Sets the operation to the one given, and then pops up the operation dialog, if one exists. More...
virtual void	EpModButtonOp (int opcode)
	Applies the operation given, and commits to it immediately. More...
virtual void	EpModLocalDataChanged (ChannelMask channels)
	Indicates to the EditPolyMod that some channels of its mesh have changed. More...
virtual void	EpModRefreshScreen ()
	Triggers a redraw of the viewports at the current time. More...
virtual void	EpModCommitUnlessAnimating (TimeValue t)
	Commits to the current operation unless we're set to "animation mode" (epm_animation_mode parameter is true) and the current operation supports animation. More...
virtual void	EpModCommit (TimeValue t)
	Commits to the current operation, and clears any animation. More...
virtual void	EpModCommitAndRepeat (TimeValue t)
	Commits to the current operation, but maintains it as the current operation with the same settings (and any animation in those parameters). More...
virtual void	EpModCancel ()
	Cancels the current operation. More...
virtual void	EpModToggleCommandMode (int mode)
	Toggles a given command mode - if it's not currently in this mode it will enter it, otherwise it will exit it. More...
virtual void	EpModEnterCommandMode (int mode)
	Exits any previous Edit Poly command modes, and enters the command mode given. More...
virtual void	EpModEnterPickMode (int mode)
	Enters the pick mode given. More...
virtual int	EpModGetCommandMode ()
	Retrieves the current Edit Poly command mode in use, if any. More...
virtual int	EpModGetPickMode ()
	Retrieves the current Edit Poly pick mode in use, if any. More...
virtual BitArray *	EpModGetSelection (int meshSelectionLevel, INode *pNode=NULL)
	Returns a BitArray containing the subobject selection in the desired selection level. More...
virtual bool	EpModSetSelection (int meshSelectionLevel, BitArray &selection, INode *pNode=NULL)
	Sets the subobject selection explicitly. More...
virtual bool	EpModSelect (int meshSelectionLevel, BitArray &selection, bool invert=false, bool select=true, INode *pNode=NULL)
	Change the selection state of a subset of subobjects - select them, invert their selection, or deselect them. More...
virtual void	SetHitLevelOverride (DWORD hlo)
	Force any hit-testing on the Edit Poly modifier to use the hit level given, instead of the default hit level associated with the current subobject level. More...
virtual void	ClearHitLevelOverride ()
	Clear any hit level override, and let hit-testing fall back on the normal hit level for subobject selection. More...
virtual DWORD	GetHitLevelOverride ()
	Returns the current hit level override, or 0 if there is none. More...
virtual DWORD	CurrentHitLevel (int *selByVert=NULL)
	Indicates the current hit level. More...
virtual void	SetHitTestResult (bool ignoreNew=false)
	Normally, all hit-testing on Edit Poly meshes is done on the mesh before the "current operation". More...
virtual void	ClearHitTestResult ()
	Clears any HitTestResult settings, and falls back on hit-testing before the current operation. More...
virtual void	SetDisplayLevelOverride (DWORD dlo)
	Sets the display level override, to force display of a particular type of subobject regardless of the current subobject level. More...
virtual void	ClearDisplayLevelOverride ()
	Clear any display level override, and let hit-testing fall back on the normal display for the current selection level. More...
virtual DWORD	GetDisplayLevelOverride ()
	Returns any current DisplayLevelOverride. More...
virtual void	ForceIgnoreBackfacing (bool force)
	This method is used to temporarily force the Edit Poly to ignore backfacing subobjects when hit-testing. More...
virtual bool	GetForceIgnoreBackfacing ()
	Indicates whether or not the Edit Poly is currently set to force ignoring backfacing subobjects. More...
virtual void	EpModMoveSelection (Point3 &val, Matrix3 &partm, Matrix3 &tmAxis, BOOL localOrigin, TimeValue t)
	Move the current subobject selection. More...
virtual void	EpModRotateSelection (Quat &val, Matrix3 &partm, Matrix3 &tmAxis, BOOL localOrigin, TimeValue t)
	Rotate the current subobject selection. More...
virtual void	EpModScaleSelection (Point3 &val, Matrix3 &partm, Matrix3 &tmAxis, BOOL localOrigin, TimeValue t)
	Scale the current subobject selection. More...
virtual void	EpModMoveSlicePlane (Point3 &val, Matrix3 &partm, Matrix3 &tmAxis, TimeValue t)
	Move the Slice Plane that's used in the ep_op_slice and ep_op_slice_face operations. More...
virtual void	EpModRotateSlicePlane (Quat &val, Matrix3 &partm, Matrix3 &tmAxis, BOOL localOrigin, TimeValue t)
	Rotate the Slice Plane that's used in the ep_op_slice and ep_op_slice_face operations. More...
virtual void	EpModScaleSlicePlane (Point3 &val, Matrix3 &partm, Matrix3 &tmAxis, BOOL localOrigin, TimeValue t)
	Scale the Slice Plane that's used in the ep_op_slice and ep_op_slice_face operations. More...
virtual void	EpResetSlicePlane ()
	Resets the slice plane used in the slice operations so that it lies in the XY plane in object space. More...
virtual Matrix3	EpGetSlicePlaneTM (TimeValue t)
	Returns the current transform of the slice plane. More...
virtual void	EpGetSlicePlane (Point3 &planeNormal, Point3 &planeCenter, TimeValue t)
	Retrieves the current slice plane, by its normal and center. More...
virtual void	EpSetSlicePlane (Point3 &planeNormal, Point3 &planeCenter, TimeValue t)
	Sets the slice plane to use the normal and center given. More...
virtual bool	EpInSliceMode ()
	Indicates if we're currently in the "Slice Plane" mode, which is not a command mode, but rather a different way of handling the regular (move, rotate, scale) command modes. More...
virtual bool	EpInSlice ()
	Indicates if we're currently in a Slice operation (ep_op_slice or ep_op_slice_face). More...
virtual Modifier *	GetModifier ()=0
	Returns the Edit Poly cast as a modifier. More...
virtual IObjParam *	EpModGetIP ()
	Returns NULL if the Edit Poly is not currently up in the modifier panel, or the IObjParam interface pointer otherwise. More...
virtual HWND	GetDlgHandle (int paramPanelID)
	Returns the handle of the dialog specified. More...
virtual void	UpdateAlignParameters (TimeValue t)
	Updates the Align normal and offset parameters based on the current viewport and on the ep_align_type parameter. More...
virtual void	UpdateCache (TimeValue t)
	Makes sure that all the LocalModData used by the Edit Poly modifiers has an up to date cache. More...
virtual bool	EpModShowOperationDialog ()
	Show the popup dialog associated with the current operation. More...
virtual bool	EpModShowingOperationDialog ()
	Indicates whether or not there is currently a popup dialog being displayed with parameters for the current operation. More...
virtual void	EpModCloseOperationDialog ()
	Close the popup dialog which shows the current operation's parameters, if it's currently being displayed. More...
virtual void	EpModRepeatLast ()
	Repeat the last operation. More...
virtual INode *	EpModGetPrimaryNode ()
	Get the current "Primary" node, which is used by default when node-specific commands are given and the node given is NULL. More...
virtual void	EpModSetPrimaryNode (INode *node)
	Set the current "Primary" node, which is used by default when node-specific commands are given and the node given is NULL. More...
virtual Matrix3	EpModGetNodeTM (TimeValue t, INode *node=NULL)
	Retrieve the transform of the Edit Poly's node. More...
Matrix3	EpModGetNodeTM_FPS (INode *node=NULL, TimeValue t=0)
virtual int	EpModCreateVertex (Point3 p, INode *pNode=NULL)
	Create a new vertex in the mesh. More...
virtual int	EpModCreateFace (Tab< int > *vertex, INode *pNode=NULL)
	Create a new face in the mesh. More...
virtual int	EpModCreateEdge (int v1, int v2, INode *pNode=NULL)
	Create a new edge in the mesh. More...
virtual void	EpModSetDiagonal (int v1, int v2, INode *pNode=NULL)
	Change the triangulation of a polygon such that there will be a diagonal between the two vertices given. More...
virtual void	EpModCut (int startLevel, int startIndex, Point3 startPoint, Point3 normal, INode *pNode=NULL)
	Set up a Cut operation, starting at a specific subobject and at a specific point. More...
virtual void	EpModSetCutEnd (Point3 endPoint, INode *pNode=NULL)
	Set the end point of a cut. More...
virtual int	EpModGetLastCutEnd ()
	If the last Cut we made finished successfully, this method will return the index of the vertex at the end of the cut. More...
virtual void	EpModClearLastCutEnd ()
	Resets the "last cut end" data to -1. More...
virtual void	EpModCutCancel (INode *pNode=NULL)
	Please ignore - this method was never implemented, it does nothing. More...
virtual void	EpModDivideEdge (int edge, float prop, INode *pNode=NULL)
	Divides edge, inserting a vertex partway along its length. More...
virtual void	EpModDivideFace (int face, Tab< float > *bary, INode *pNode=NULL)
	Divides the face, inserting a vertex in it and splitting the face up into triangles connecting the new vertex with all the face's original edges. More...
virtual void	EpModWeldVerts (int v1, int v2, INode *pNode=NULL)
	Weld two vertices. More...
virtual void	EpModWeldEdges (int e1, int e2, INode *pNode=NULL)
	Weld two edges (by welding the vertex endpoints). More...
virtual void	EpModAttach (INode *node, INode *pNode=NULL, TimeValue t=0)
	Attach another mesh to this one. More...
virtual void	EpModMultiAttach (Tab< INode * > &nodeTab, INode *pNode=NULL, TimeValue t=0)
	Attach a bunch of other meshes to this one. More...
virtual void	EpModDetachToObject (MSTR &newObjectName, TimeValue t)
	Detaches the current selection to a new Editable Poly object. More...
virtual void	EpModCreateShape (MSTR &shapeObjectName, TimeValue t)
	Creates a shape object based on the current set of selected edges. More...
virtual void	EpModSetHingeEdge (int edge, Matrix3 modContextTM, INode *pNode=NULL)
	Sets the Hinge from Edge operation to use the hinge edge given. More...
virtual int	EpModGetHingeEdge (INode *pNode)
	Retrieves the current Hinge Edge, or -1 if no hinge edge is set (or if it's set on a different node). More...
virtual void	EpModBridgeBorders (int edge1, int edge2, INode *pNode=NULL)
	Create a Bridge between two border loops. More...
virtual void	EpModBridgePolygons (int face1, int face2, INode *pNode=NULL)
virtual void	EpModSetBridgeNode (INode *pNode)
virtual INode *	EpModGetBridgeNode ()
virtual bool	EpModReadyToBridgeSelected ()
virtual void	EpModTurnDiagonal (int faceIndex, int diagonal, INode *pNode=NULL)
virtual void	EpModListOperations (INode *pNode=NULL)
	Lists the entire history of applied operations to the Maxscript listener window. More...
virtual MNMesh *	EpModGetMesh (INode *pNode=NULL)
	Get a pointer to the Edit Poly's cached mesh. More...
virtual MNMesh *	EpModGetOutputMesh (INode *pNode=NULL)
	Get a pointer to the Edit Poly's cached output mesh. More...
virtual int	EpMeshGetNumVertices (INode *pNode=NULL)
	Returns the number of vertices in the mesh. More...
virtual Point3	EpMeshGetVertex (int vertIndex, INode *pNode=NULL)
	Returns the position (in object space) of a particular vertex in the mesh. More...
virtual int	EpMeshGetVertexFaceCount (int vertIndex, INode *pNode=NULL)
	Returns the number of faces using a particular vertex. More...
virtual int	EpMeshGetVertexFace (int vertIndex, int whichFace, INode *pNode=NULL)
	Returns a face that uses the vertex given. More...
virtual int	EpMeshGetVertexEdgeCount (int vertIndex, INode *pNode=NULL)
	Returns the number of edges using a particualr vertex. More...
virtual int	EpMeshGetVertexEdge (int vertIndex, int whichEdge, INode *pNode=NULL)
	Returns one of the edges using the vertex given. More...
virtual int	EpMeshGetNumEdges (INode *pNode=NULL)
	Returns the number of edges in the mesh. More...
virtual int	EpMeshGetEdgeVertex (int edgeIndex, int end, INode *pNode=NULL)
	Returns the vertex at one end of the edge given. More...
virtual int	EpMeshGetEdgeFace (int edgeIndex, int side, INode *pNode=NULL)
	Returns the face on one side of the edge given. More...
virtual int	EpMeshGetNumFaces (INode *pNode=NULL)
	Returns the number of faces in the mesh. More...
virtual int	EpMeshGetFaceDegree (int faceIndex, INode *pNode=NULL)
	Returns the degree of the indicated face. More...
virtual int	EpMeshGetFaceVertex (int faceIndex, int corner, INode *pNode=NULL)
	Returns the vertex in a particular corner of a particular face. More...
virtual int	EpMeshGetFaceEdge (int faceIndex, int side, INode *pNode=NULL)
	Returns the edge on a particular side of a particular face. More...
virtual int	EpMeshGetFaceDiagonal (int faceIndex, int diagonal, int end, INode *pNode=NULL)
	Returns the index of the corner used at an end of a face diagonal. More...
virtual int	EpMeshGetFaceMaterial (int faceIndex, INode *pNode=NULL)
	Returns the material ID used by a particular face. More...
virtual DWORD	EpMeshGetFaceSmoothingGroup (int faceIndex, INode *pNode=NULL)
	Returns the smoothing groups used by a particular face. More...
virtual int	EpMeshGetNumMapChannels (INode *pNode=NULL)
	Returns the number of positive map channels in the mesh. More...
virtual bool	EpMeshGetMapChannelActive (int mapChannel, INode *pNode=NULL)
	Indicates if the specified map channel is "active", that is, if it contains a set of map coordinates and map faces. More...
virtual int	EpMeshGetNumMapVertices (int mapChannel, INode *pNode=NULL)
	Returns the number of map vertices in the specified map. More...
virtual UVVert	EpMeshGetMapVertex (int mapChannel, int vertIndex, INode *pNode=NULL)
	Returns the UVVert map vertex position for a given map channel and map vertex index. More...
virtual int	EpMeshGetMapFaceVertex (int mapChannel, int faceIndex, int corner, INode *pNode=NULL)
	Returns the index of the map vertex used in a particular corner of a particular map face (in a particular map). More...
virtual void	EpModBridgeEdges (const int in_edge1, const int in_edge2, INode *in_pNode=NULL)
	Bridges individual edges, will use current parameters. More...
virtual void	EpModUpdateRingEdgeSelection (int in_val, INode *in_pNode=NULL)
	Changea the edge selection in the ring direction. More...
virtual void	EpModUpdateLoopEdgeSelection (int in_val, INode *in_pNode=NULL)
	Changes the edge selection in the loop direction. More...
virtual void	EpModSetRingShift (int in_newPos, bool in_moveOnly, bool in_add)
	Changes the edge selection , in the ring direction. More...
virtual void	EpModSetLoopShift (int in_newPos, bool in_moveOnly, bool in_add)
	Changes the edge selection , in the loop direction. More...
virtual int	EpModConvertSelectionToBorder (int in_epSelLevelFrom, int in_epSelLevelTo)
	Converts current sub-object selection to the specified sub-object border. More...
virtual void	EpModPaintDeformCommit ()
	Commits any Paint Deformation as if pressing the Commit button. More...
virtual void	EpModPaintDeformCancel ()
	Reverts any Paint Deformation as if pressing the Revert button. More...
virtual Point3	EPMeshGetFaceNormal (const int in_faceIndex, INode *in_pNode=NULL)
	Returns the normal of the face specified. More...
virtual Point3	EPMeshGetFaceCenter (const int in_faceIndex, INode *in_pNode=NULL)
	Returns the center of the face specified. More...
virtual float	EPMeshGetFaceArea (const int in_faceIndex, INode *in_pNode=NULL)
	Returns the area of the face specified. More...
virtual BitArray *	EPMeshGetOpenEdges (INode *in_pNode=NULL)
	Returns a list of edges that are adjacent to at least one empty face. More...
virtual void	EPMeshSetVert (const BitArray &in_vset, const Point3 &in_point, INode *in_pNode=NULL)
	Moves the specified vertices to the specified point. More...
virtual void	SmGrpFloater ()=0
	Brings up the Smooting Group floater dialog. If it is already up it closes it More...
virtual void	MatIDFloater ()=0
	Brings up the Material ID floater dialog. If it is already up it closes it More...
virtual BOOL	MatIDFloaterVisible ()=0
	Returns whether the Material ID floater dialog is up. More...
virtual BOOL	SmGrpFloaterVisible ()=0
	Returns whether the Smooting Group floater dialog is up. More...
virtual void	CloseSmGrpFloater ()
	Closes the Smoothing Group Floater Dialog. More...
virtual void	CloseMatIDFloater ()
virtual HWND	MatIDFloaterHWND ()
	Returns the Material ID Floater Dialog Handle. More...
virtual HWND	SmGrpFloaterHWND ()
	Returns the SmGrp Floater Dialog Handle. More...
virtual void	ListDeltaOps ()=0
	Prints the delta operations to script window. More...
virtual int	EpModGetLast ()
	Returns the last operation used or -1 if none. More...
GetByFlag
virtual bool	EPMeshGetVertsByFlag (BitArray &out_vset, const DWORD in_flags, const DWORD in_fmask=0x0, INode *in_pNode=NULL)
	These methods retrieve the parts of the object that match the specified flags and mask passed in. More...
virtual bool	EPMeshGetEdgesByFlag (BitArray &out_eset, const DWORD in_flags, const DWORD in_fmask=0x0, INode *in_pNode=NULL)
	Retrieves the edges specified the flag and mask, and updates the bitarray passed in. More...
virtual bool	EPMeshGetFacesByFlag (BitArray &out_fset, const DWORD in_flags, const DWORD in_fmask=0x0, INode *in_pNode=NULL)
	Retrieves the faces specified the flag and mask, and updates the bitarray passed in. More...
SetFlags
virtual void	EPMeshSetVertexFlags (BitArray &in_vset, const DWORD in_flags, DWORD in_fmask=0x0, const bool in_undoable=true, INode *in_pNode=NULL)
	These methods set the flags on the specified subobjects to match the flags and mask passed in. More...
virtual void	EPMeshSetEdgeFlags (BitArray &in_eset, const DWORD in_flags, DWORD in_fmask=0x0, const bool in_undoable=true, INode *in_pNode=NULL)
	Sets the specified vertices flags to the specified value. More...
virtual void	EPMeshSetFaceFlags (BitArray &in_fset, const DWORD in_flags, DWORD in_fmask=0x0, const bool in_undoable=true, INode *in_pNode=NULL)
	Sets the specified faces flags to the specified value. More...
GetFlags
virtual int	EPMeshGetVertexFlags (const int in_vertexIndex, INode *in_pNode=NULL)
	These methods get the flags on the specified subobjects. More...
virtual int	EPMeshGetEdgeFlags (const int in_edgeIndex, INode *in_pNode=NULL)
	Retrieves the flags from the specified edge. More...
virtual int	EPMeshGetFaceFlags (const int in_faceIndex, INode *in_pNode=NULL)
	Retrieves the flags from the specified face. More...
GetUsing
virtual void	EPMeshGetVertsUsingEdge (BitArray &out_vset, const BitArray &in_eset, INode *in_pNode=NULL)
	These methods retrieve all subobjects of the specified type that are connected to the second list of subobjects passed in . More...
virtual void	EPMeshGetEdgesUsingVert (BitArray &out_eset, BitArray &in_vset, INode *in_pNode=NULL)
	Retrieves list of edges that are used by the vertices specified. More...
virtual void	EPMeshGetFacesUsingEdge (BitArray &out_fset, BitArray &in_eset, INode *in_pNode=NULL)
	Retrieves list of faces that are used by the edges specified. More...
virtual void	EPMeshGetElementsUsingFace (BitArray &out_eset, BitArray &in_fset, BitArray &in_fenceSet, INode *in_pNode=NULL)
	Retrieves list of elements that are used by the faces specified. More...
virtual void	EPMeshGetFacesUsingVert (BitArray &out_fset, BitArray &in_vset, INode *in_pNode=NULL)
	Retrieves list of faces that are used by the vertices specified. More...
virtual void	EPMeshGetVertsUsingFace (BitArray &out_vset, BitArray &in_fset, INode *in_pNode=NULL)
	Retrieves list of verts that are used by the faces specified. More...
Public Member Functions inherited from FPMixinInterface
	FPMixinInterface ()
virtual LifetimeType	LifetimeControl ()
virtual CoreExport bool	RegisterNotifyCallback (InterfaceNotifyCallback *incb)
virtual void	UnRegisterNotifyCallback (InterfaceNotifyCallback *incb)
CoreExport	~FPMixinInterface ()
virtual BaseInterface *	GetInterface (Interface_ID id)
virtual FPInterfaceDesc *	GetDescByID (Interface_ID id)
virtual Interface_ID	GetID ()
Public Member Functions inherited from FPInterface
virtual CoreExport FPStatus	Invoke (FunctionID fid, TimeValue t=0, FPParams *params=NULL)
virtual FPStatus	Invoke (FunctionID fid, FPParams *params)
virtual CoreExport FPStatus	Invoke (FunctionID fid, TimeValue t, FPValue &result, FPParams *params=NULL)
virtual FPStatus	Invoke (FunctionID fid, FPValue &result, FPParams *params=NULL)
virtual CoreExport FunctionID	FindFn (const MCHAR *name)
virtual CoreExport BOOL	IsEnabled (FunctionID actionID)
virtual CoreExport BOOL	IsChecked (FunctionID actionID)
virtual CoreExport BOOL	IsVisible (FunctionID actionID)
virtual CoreExport FunctionID	GetIsEnabled (FunctionID actionID)
virtual CoreExport FunctionID	GetIsChecked (FunctionID actionID)
virtual CoreExport FunctionID	GetIsVisible (FunctionID actionID)
virtual ActionTable *	GetActionTable ()
virtual void	EnableActions (BOOL onOff)
Public Member Functions inherited from BaseInterface
virtual UtilExport	~BaseInterface ()
	Destructor. More...
virtual BaseInterface *	AcquireInterface ()
virtual void	ReleaseInterface ()
virtual void	DeleteInterface ()
virtual BaseInterface *	CloneInterface (void *remapDir=nullptr)
Public Member Functions inherited from InterfaceServer
virtual UtilExport	~InterfaceServer ()
	Destructor. More...
template<class InterfaceType >
InterfaceType *	GetTypedInterface ()

Additional Inherited Members
Public Types inherited from BaseInterface
enum	LifetimeType { noRelease , immediateRelease , wantsRelease , serverControlled }
Static Public Member Functions inherited from MaxHeapOperators
static UtilExport void *	operator new (size_t size)
	Standard new operator used to allocate objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e)
	Standard new operator used to allocate objects if there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate objects that takes the type of memory, filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate arrays of objects. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void	operator delete (void *ptr)
	Standard delete operator used to deallocate an object If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an object If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an object that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, void *placement_ptr)
	Placement new operator. More...
static UtilExport void	operator delete (void *ptr, void *placement_ptr)
	Placement delete operator. More...
static UtilExport void *	aligned_malloc (size_t size, size_t alignment)
	Allocates memory on a specified alignment boundary. More...
static UtilExport void *	aligned_realloc (void *ptr, size_t size, size_t alignment)
	Reallocates memory on a specified alignment boundary. More...
static UtilExport void	aligned_free (void *ptr)
	Frees a block of memory that was allocated with aligned_malloc/aligned_realloc. More...
Static Public Attributes inherited from FPInterface
static CoreExport FPInterfaceDesc	nullInterface
Protected Member Functions inherited from FPMixinInterface
	FPMixinInterface (const FPMixinInterface &rhs)
FPMixinInterface &	operator= (const FPMixinInterface &rhs)
Protected Member Functions inherited from FPInterface
virtual FPStatus	_dispatch_fn (FunctionID fid, TimeValue t, FPValue &result, FPParams *p)
Protected Attributes inherited from FPMixinInterface
Tab< InterfaceNotifyCallback * > *	interfaceNotifyCBs

Detailed Description

This class is the published interface for Edit Poly modifiers.

You can use it to manipulate Edit Poly modifiers directly. / Implementations of all of these methods can be found in the source for the Edit Poly modifier. / usages for most of them can be found there as well.

Member Function Documentation

FN_0() [1/16]

FN_0	(	epmod_get_sel_level	,
		TYPE_ENUM	,
		GetEPolySelLevel
	)

FN_0() [2/16]

FN_0	(	epmod_get_mn_sel_level	,
		TYPE_ENUM	,
		GetMNSelLevel
	)

VFN_1() [1/12]

VFN_1	(	epmod_set_sel_level	,
		SetEPolySelLevel	,
		TYPE_ENUM
	)

FN_3() [1/10]

FN_3	(	epmod_convert_selection	,
		TYPE_INT	,
		EpModConvertSelection	,
		TYPE_ENUM	,
		TYPE_ENUM	,
		TYPE_bool
	)

FN_0() [3/16]

FN_0	(	epmod_get_operation	,
		TYPE_ENUM	,
		GetPolyOperationID
	)

VFN_1() [2/12]

VFN_1	(	epmod_set_operation	,
		EpModSetOperation	,
		TYPE_ENUM
	)

VFN_1() [3/12]

VFN_1	(	epmod_popup_dialog	,
		EpModPopupDialog	,
		TYPE_ENUM
	)

VFN_1() [4/12]

VFN_1	(	epmod_button_op	,
		EpModButtonOp	,
		TYPE_ENUM
	)

VFN_0() [1/11]

VFN_0	(	epmod_repeat_last	,
		EpModRepeatLast
	)

VFNT_0() [1/3]

VFNT_0	(	epmod_commit	,
		EpModCommit
	)

VFNT_0() [2/3]

VFNT_0	(	epmod_commit_unless_animating	,
		EpModCommitUnlessAnimating
	)

VFNT_0() [3/3]

VFNT_0	(	epmod_commit_and_repeat	,
		EpModCommitAndRepeat
	)

VFN_0() [2/11]

VFN_0	(	epmod_cancel_operation	,
		EpModCancel
	)

FN_2() [1/18]

FN_2	(	epmod_get_selection	,
		TYPE_BITARRAY	,
		EpModGetSelection	,
		TYPE_ENUM	,
		TYPE_INODE
	)

FN_3() [2/10]

FN_3	(	epmod_set_selection	,
		TYPE_bool	,
		EpModSetSelection	,
		TYPE_ENUM	,
		TYPE_BITARRAY_BR	,
		TYPE_INODE
	)

FN_5()

FN_5	(	epmod_select	,
		TYPE_bool	,
		EpModSelect	,
		TYPE_ENUM	,
		TYPE_BITARRAY_BR	,
		TYPE_bool	,
		TYPE_bool	,
		TYPE_INODE
	)

VFN_1() [5/12]

VFN_1	(	epmod_set_primary_node	,
		EpModSetPrimaryNode	,
		TYPE_INODE
	)

VFN_1() [6/12]

VFN_1	(	epmod_toggle_command_mode	,
		EpModToggleCommandMode	,
		TYPE_ENUM
	)

VFN_1() [7/12]

VFN_1	(	epmod_enter_command_mode	,
		EpModEnterCommandMode	,
		TYPE_ENUM
	)

FN_0() [4/16]

FN_0	(	epmod_get_command_mode	,
		TYPE_ENUM	,
		EpModGetCommandMode
	)

VFN_1() [8/12]

VFN_1	(	epmod_enter_pick_mode	,
		EpModEnterPickMode	,
		TYPE_ENUM
	)

FN_0() [5/16]

FN_0	(	epmod_get_pick_mode	,
		TYPE_ENUM	,
		EpModGetPickMode
	)

VFNT_4() [1/5]

VFNT_4	(	epmod_move_selection	,
		EpModMoveSelection	,
		TYPE_POINT3_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_BOOL
	)

VFNT_4() [2/5]

VFNT_4	(	epmod_rotate_selection	,
		EpModRotateSelection	,
		TYPE_QUAT_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_BOOL
	)

VFNT_4() [3/5]

VFNT_4	(	epmod_scale_selection	,
		EpModScaleSelection	,
		TYPE_POINT3_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_BOOL
	)

VFNT_3()

VFNT_3	(	epmod_move_slicer	,
		EpModMoveSlicePlane	,
		TYPE_POINT3_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_MATRIX3_BR
	)

VFNT_4() [4/5]

VFNT_4	(	epmod_rotate_slicer	,
		EpModRotateSlicePlane	,
		TYPE_QUAT_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_BOOL
	)

VFNT_4() [5/5]

VFNT_4	(	epmod_scale_slicer	,
		EpModScaleSlicePlane	,
		TYPE_POINT3_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_MATRIX3_BR	,
		TYPE_BOOL
	)

FN_0() [6/16]

FN_0	(	epmod_in_slice_mode	,
		TYPE_bool	,
		EpInSliceMode
	)

VFN_0() [3/11]

VFN_0	(	epmod_reset_slice_plane	,
		EpResetSlicePlane
	)

FNT_0()

FNT_0	(	epmod_get_slice_plane_tm	,
		TYPE_MATRIX3_BV	,
		EpGetSlicePlaneTM
	)

VFNT_2() [1/4]

VFNT_2	(	epmod_get_slice_plane	,
		EpGetSlicePlane	,
		TYPE_POINT3_BR	,
		TYPE_POINT3_BR
	)

VFNT_2() [2/4]

VFNT_2	(	epmod_set_slice_plane	,
		EpSetSlicePlane	,
		TYPE_POINT3_BR	,
		TYPE_POINT3_BR
	)

FN_2() [2/18]

FN_2	(	epmod_create_vertex	,
		TYPE_INDEX	,
		EpModCreateVertex	,
		TYPE_POINT3	,
		TYPE_INODE
	)

FN_2() [3/18]

FN_2	(	epmod_create_face	,
		TYPE_INDEX	,
		EpModCreateFace	,
		TYPE_INDEX_TAB	,
		TYPE_INODE
	)

FN_3() [3/10]

FN_3	(	epmod_create_edge	,
		TYPE_INDEX	,
		EpModCreateEdge	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

VFN_3() [1/18]

VFN_3	(	epmod_set_diagonal	,
		EpModSetDiagonal	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

VFN_5() [1/4]

VFN_5	(	epmod_cut	,
		EpModCut	,
		TYPE_ENUM	,
		TYPE_INDEX	,
		TYPE_POINT3	,
		TYPE_POINT3	,
		TYPE_INODE
	)

VFN_3() [2/18]

VFN_3	(	epmod_target_weld_vertex	,
		EpModWeldVerts	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

VFN_3() [3/18]

VFN_3	(	epmod_target_weld_edge	,
		EpModWeldEdges	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

VFNT_2() [3/4]

VFNT_2	(	epmod_attach_node	,
		EpModAttach	,
		TYPE_INODE	,
		TYPE_INODE
	)

VFNT_2() [4/4]

VFNT_2	(	epmod_attach_nodes	,
		EpModMultiAttach	,
		TYPE_INODE_TAB_BR	,
		TYPE_INODE
	)

VFNT_1() [1/2]

VFNT_1	(	epmod_detach_to_object	,
		EpModDetachToObject	,
		TYPE_TSTR_BR
	)

VFNT_1() [2/2]

VFNT_1	(	epmod_create_shape	,
		EpModCreateShape	,
		TYPE_TSTR_BR
	)

VFN_3() [4/18]

VFN_3	(	epmod_set_hinge_edge	,
		EpModSetHingeEdge	,
		TYPE_INDEX	,
		TYPE_MATRIX3	,
		TYPE_INODE
	)

FN_1() [1/7]

FN_1	(	epmod_get_hinge_edge	,
		TYPE_INDEX	,
		EpModGetHingeEdge	,
		TYPE_INODE
	)

VFN_3() [5/18]

VFN_3	(	epmod_bridge_borders	,
		EpModBridgeBorders	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

VFN_3() [6/18]

VFN_3	(	epmod_bridge_polygons	,
		EpModBridgePolygons	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_0() [7/16]

FN_0	(	epmod_get_bridge_node	,
		TYPE_INODE	,
		EpModGetBridgeNode
	)

VFN_1() [9/12]

VFN_1	(	epmod_set_bridge_node	,
		EpModSetBridgeNode	,
		TYPE_INODE
	)

FN_0() [8/16]

FN_0	(	epmod_ready_to_bridge_selected	,
		TYPE_bool	,
		EpModReadyToBridgeSelected
	)

FN_1() [2/7]

FN_1	(	epmod_get_preserve_map	,
		TYPE_bool	,
		EpModGetPreserveMap	,
		TYPE_INT
	)

VFN_2() [1/2]

VFN_2	(	epmod_set_preserve_map	,
		EpModSetPreserveMap	,
		TYPE_INT	,
		TYPE_bool
	)

VFN_3() [7/18]

VFN_3	(	epmod_turn_diagonal	,
		EpModTurnDiagonal	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_1() [3/7]

FN_1	(	epmod_get_num_vertices	,
		TYPE_INT	,
		EpMeshGetNumVertices	,
		TYPE_INODE
	)

FN_2() [4/18]

FN_2	(	epmod_get_vertex	,
		TYPE_POINT3_BV	,
		EpMeshGetVertex	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_2() [5/18]

FN_2	(	epmod_get_vertex_face_count	,
		TYPE_INT	,
		EpMeshGetVertexFaceCount	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_3() [4/10]

FN_3	(	epmod_get_vertex_face	,
		TYPE_INDEX	,
		EpMeshGetVertexFace	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_2() [6/18]

FN_2	(	epmod_get_vertex_edge_count	,
		TYPE_INT	,
		EpMeshGetVertexEdgeCount	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_3() [5/10]

FN_3	(	epmod_get_vertex_edge	,
		TYPE_INDEX	,
		EpMeshGetVertexEdge	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_1() [4/7]

FN_1	(	epmod_get_num_edges	,
		TYPE_INT	,
		EpMeshGetNumEdges	,
		TYPE_INODE
	)

FN_3() [6/10]

FN_3	(	epmod_get_edge_vertex	,
		TYPE_INDEX	,
		EpMeshGetEdgeVertex	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_3() [7/10]

FN_3	(	epmod_get_edge_face	,
		TYPE_INDEX	,
		EpMeshGetEdgeFace	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_1() [5/7]

FN_1	(	epmod_get_num_faces	,
		TYPE_INT	,
		EpMeshGetNumFaces	,
		TYPE_INODE
	)

FN_2() [7/18]

FN_2	(	epmod_get_face_degree	,
		TYPE_INT	,
		EpMeshGetFaceDegree	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_3() [8/10]

FN_3	(	epmod_get_face_vertex	,
		TYPE_INDEX	,
		EpMeshGetFaceVertex	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_3() [9/10]

FN_3	(	epmod_get_face_edge	,
		TYPE_INDEX	,
		EpMeshGetFaceEdge	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_4() [1/5]

FN_4	(	epmod_get_face_diagonal	,
		TYPE_INDEX	,
		EpMeshGetFaceDiagonal	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_2() [8/18]

FN_2	(	epmod_get_face_material	,
		TYPE_INDEX	,
		EpMeshGetFaceMaterial	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_2() [9/18]

FN_2	(	epmod_get_face_smoothing_group	,
		TYPE_DWORD	,
		EpMeshGetFaceSmoothingGroup	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_1() [6/7]

FN_1	(	epmod_get_num_map_channels	,
		TYPE_INT	,
		EpMeshGetNumMapChannels	,
		TYPE_INODE
	)

FN_2() [10/18]

FN_2	(	epmod_get_map_channel_active	,
		TYPE_bool	,
		EpMeshGetMapChannelActive	,
		TYPE_INT	,
		TYPE_INODE
	)

FN_2() [11/18]

FN_2	(	epmod_get_num_map_vertices	,
		TYPE_INT	,
		EpMeshGetNumMapVertices	,
		TYPE_INT	,
		TYPE_INODE
	)

FN_3() [10/10]

FN_3	(	epmod_get_map_vertex	,
		TYPE_POINT3_BV	,
		EpMeshGetMapVertex	,
		TYPE_INT	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_4() [2/5]

FN_4	(	epmod_get_map_face_vertex	,
		TYPE_INDEX	,
		EpMeshGetMapFaceVertex	,
		TYPE_INT	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

VFN_1() [10/12]

VFN_1	(	epmod_list_operations	,
		EpModListOperations	,
		TYPE_INODE
	)

VFN_1() [11/12]

VFN_1	(	epmod_local_data_changed	,
		EpModLocalDataChanged	,
		TYPE_DWORD
	)

VFN_0() [4/11]

VFN_0	(	epmod_refresh_screen	,
		EpModRefreshScreen
	)

FN_0() [9/16]

FN_0	(	epmod_in_slice	,
		TYPE_bool	,
		EpInSlice
	)

FN_0() [10/16]

FN_0	(	epmod_show_operation_dialog	,
		TYPE_bool	,
		EpModShowOperationDialog
	)

FN_0() [11/16]

FN_0	(	epmod_showing_operation_dialog	,
		TYPE_bool	,
		EpModShowingOperationDialog
	)

VFN_0() [5/11]

VFN_0	(	epmod_close_operation_dialog	,
		EpModCloseOperationDialog
	)

FN_0() [12/16]

FN_0	(	epmod_get_primary_node	,
		TYPE_INODE	,
		EpModGetPrimaryNode
	)

FNT_1()

FNT_1	(	epmod_get_node_tm	,
		TYPE_MATRIX3_BV	,
		EpModGetNodeTM_FPS	,
		TYPE_INODE
	)

VFN_2() [2/2]

VFN_2	(	epmod_set_cut_end	,
		EpModSetCutEnd	,
		TYPE_POINT3	,
		TYPE_INODE
	)

FN_0() [13/16]

FN_0	(	epmod_get_last_cut_end	,
		TYPE_INDEX	,
		EpModGetLastCutEnd
	)

VFN_0() [6/11]

VFN_0	(	epmod_clear_last_cut_end	,
		EpModClearLastCutEnd
	)

VFN_1() [12/12]

VFN_1	(	epmod_cut_cancel	,
		EpModCutCancel	,
		TYPE_INODE
	)

VFN_3() [8/18]

VFN_3	(	epmod_divide_edge	,
		EpModDivideEdge	,
		TYPE_INDEX	,
		TYPE_FLOAT	,
		TYPE_INODE
	)

VFN_3() [9/18]

VFN_3	(	epmod_divide_face	,
		EpModDivideFace	,
		TYPE_INDEX	,
		TYPE_FLOAT_TAB	,
		TYPE_INODE
	)

VFN_3() [10/18]

VFN_3	(	epmod_bridge_edges	,
		EpModBridgeEdges	,
		TYPE_INDEX	,
		TYPE_INDEX	,
		TYPE_INODE
	)

VFN_3() [11/18]

VFN_3	(	epmod_ring_sel	,
		EpModSetRingShift	,
		TYPE_INT	,
		TYPE_bool	,
		TYPE_bool
	)

VFN_3() [12/18]

VFN_3	(	epmod_loop_sel	,
		EpModSetLoopShift	,
		TYPE_INT	,
		TYPE_bool	,
		TYPE_bool
	)

FN_2() [12/18]

FN_2	(	epmod_convert_selection_to_border	,
		TYPE_INT	,
		EpModConvertSelectionToBorder	,
		TYPE_ENUM	,
		TYPE_ENUM
	)

VFN_0() [7/11]

VFN_0	(	epmod_paintdeform_commit	,
		EpModPaintDeformCommit
	)

VFN_0() [8/11]

VFN_0	(	epmod_paintdeform_cancel	,
		EpModPaintDeformCancel
	)

FN_2() [13/18]

FN_2	(	epmod_get_face_normal	,
		TYPE_POINT3_BV	,
		EPMeshGetFaceNormal	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_2() [14/18]

FN_2	(	epmod_get_face_center	,
		TYPE_POINT3_BV	,
		EPMeshGetFaceCenter	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_2() [15/18]

FN_2	(	epmod_get_face_area	,
		TYPE_FLOAT	,
		EPMeshGetFaceArea	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_1() [7/7]

FN_1	(	epmod_get_open_edges	,
		TYPE_BITARRAY	,
		EPMeshGetOpenEdges	,
		TYPE_INODE
	)

FN_4() [3/5]

FN_4	(	epmod_get_verts_by_flag	,
		TYPE_bool	,
		EPMeshGetVertsByFlag	,
		TYPE_BITARRAY_BR	,
		TYPE_DWORD	,
		TYPE_DWORD	,
		TYPE_INODE
	)

FN_4() [4/5]

FN_4	(	epmod_get_edges_by_flag	,
		TYPE_bool	,
		EPMeshGetEdgesByFlag	,
		TYPE_BITARRAY_BR	,
		TYPE_DWORD	,
		TYPE_DWORD	,
		TYPE_INODE
	)

FN_4() [5/5]

FN_4	(	epmod_get_faces_by_flag	,
		TYPE_bool	,
		EPMeshGetFacesByFlag	,
		TYPE_BITARRAY_BR	,
		TYPE_DWORD	,
		TYPE_DWORD	,
		TYPE_INODE
	)

VFN_5() [2/4]

VFN_5	(	epmod_set_vertex_flags	,
		EPMeshSetVertexFlags	,
		TYPE_BITARRAY_BR	,
		TYPE_DWORD	,
		TYPE_DWORD	,
		TYPE_bool	,
		TYPE_INODE
	)

VFN_5() [3/4]

VFN_5	(	epmod_set_edge_flags	,
		EPMeshSetEdgeFlags	,
		TYPE_BITARRAY_BR	,
		TYPE_DWORD	,
		TYPE_DWORD	,
		TYPE_bool	,
		TYPE_INODE
	)

VFN_5() [4/4]

VFN_5	(	epmod_set_face_flags	,
		EPMeshSetFaceFlags	,
		TYPE_BITARRAY_BR	,
		TYPE_DWORD	,
		TYPE_DWORD	,
		TYPE_bool	,
		TYPE_INODE
	)

FN_2() [16/18]

FN_2	(	epmod_get_vertex_flags	,
		TYPE_INT	,
		EPMeshGetVertexFlags	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_2() [17/18]

FN_2	(	epmod_get_edge_flags	,
		TYPE_INT	,
		EPMeshGetEdgeFlags	,
		TYPE_INDEX	,
		TYPE_INODE
	)

FN_2() [18/18]

FN_2	(	epmod_get_face_flags	,
		TYPE_INT	,
		EPMeshGetFaceFlags	,
		TYPE_INDEX	,
		TYPE_INODE
	)

VFN_3() [13/18]

VFN_3	(	epmod_get_verts_using_edge	,
		EPMeshGetVertsUsingEdge	,
		TYPE_BITARRAY_BR	,
		TYPE_BITARRAY_BR	,
		TYPE_INODE
	)

VFN_3() [14/18]

VFN_3	(	epmod_get_edges_using_vert	,
		EPMeshGetEdgesUsingVert	,
		TYPE_BITARRAY_BR	,
		TYPE_BITARRAY_BR	,
		TYPE_INODE
	)

VFN_3() [15/18]

VFN_3	(	epmod_get_faces_using_edge	,
		EPMeshGetFacesUsingEdge	,
		TYPE_BITARRAY_BR	,
		TYPE_BITARRAY_BR	,
		TYPE_INODE
	)

VFN_4()

VFN_4	(	epmod_get_elements_using_face	,
		EPMeshGetElementsUsingFace	,
		TYPE_BITARRAY_BR	,
		TYPE_BITARRAY_BR	,
		TYPE_BITARRAY_BR	,
		TYPE_INODE
	)

VFN_3() [16/18]

VFN_3	(	epmod_get_faces_using_vert	,
		EPMeshGetFacesUsingVert	,
		TYPE_BITARRAY_BR	,
		TYPE_BITARRAY_BR	,
		TYPE_INODE
	)

VFN_3() [17/18]

VFN_3	(	epmod_get_verts_using_face	,
		EPMeshGetVertsUsingFace	,
		TYPE_BITARRAY_BR	,
		TYPE_BITARRAY_BR	,
		TYPE_INODE
	)

VFN_3() [18/18]

VFN_3	(	epmod_set_vert	,
		EPMeshSetVert	,
		TYPE_BITARRAY_BR	,
		TYPE_POINT3_BR	,
		TYPE_INODE
	)

VFN_0() [9/11]

VFN_0	(	epmod_smgrp_floater	,
		SmGrpFloater
	)

FN_0() [14/16]

FN_0	(	epmod_smgrp_floatervisible	,
		TYPE_BOOL	,
		SmGrpFloaterVisible
	)

VFN_0() [10/11]

VFN_0	(	epmod_matid_floater	,
		MatIDFloater
	)

FN_0() [15/16]

FN_0	(	epmod_matid_floatervisible	,
		TYPE_BOOL	,
		MatIDFloaterVisible
	)

VFN_0() [11/11]

VFN_0	(	epmod_list_delta_ops	,
		ListDeltaOps
	)

FN_0() [16/16]

FN_0	(	epmod_get_last	,
		TYPE_INT	,
		EpModGetLast
	)

GetDesc()

FPInterfaceDesc* GetDesc ( )

virtual

For system use only - retrieves the function publishing interface description.

Implements FPInterface.

GetEPolySelLevel()

virtual int GetEPolySelLevel ( )

pure virtual

Returns the Edit Poly selection level - one of the ePolyModSelLevel enum defined above, such as EPM_SL_VERTEX.

GetMNSelLevel()

virtual int GetMNSelLevel ( )

pure virtual

Returns the MNMesh selection level - one of MNM_SL_OBJECT, MNM_SL_VERTEX, MNM_SL_EDGE, or MNM_SL_FACE.

SetEPolySelLevel()

virtual void SetEPolySelLevel ( int  sl )

pure virtual

Sets the Edit Poly selection level.

Parameters

sl	One of the ePolyModSelLevel enum defined above - such as EPM_SL_VERTEX

EpModConvertSelection()

virtual int EpModConvertSelection ( int  epSelLevelFrom, int  epSelLevelTo, bool  requireAll  )

inlinevirtual

Converts selection between two Edit Poly selection levels, by selecting adjacent subobjects, such as edges using selected vertices, or vertices used by selected faces, etc.

Parameters

epSelLevelFrom	The selection level to convert from.
epSelLevelTo	The selection level to convert to - subobjects in this selection level will have their selection set or cleared based on this algorithm.
requireAll	Indicates if subobjects in the "to" level should be selected if any subobjects in the "from" level are selected (false) or if all subobjects in the "from" level are selected (true).

Returns

The number of subobjects this method selected in the "To" level.

Example: This could be used to convert the current vertex selection to a selection of all border loops containing only selected vertices by calling EpModConvertSelection (EPM_SL_VERTEX, EPM_SL_BORDER, true);

{ return 0; }

GetPolyOperationID()

virtual int GetPolyOperationID ( )

inlinevirtual

Returns the "current" Edit Poly operation.

If there is no current operation ep_op_null is returned. (Values are from the epolyModButtonOp enum above.)

{ return ep_op_null; }

getParamBlock()

virtual IParamBlock2* getParamBlock ( )

inlinevirtual

Returns the parameter block for the Edit Poly modifier.

(Clients can use this to control the individual parameters of the modifier. Parameters are listed above in the epolyModParameters enum.)

{ return NULL; }

GetPreserveMapSettings()

virtual MapBitArray GetPreserveMapSettings ( ) const

inlinevirtual

Returns the Preserve settings for all map channels.

(Does not reflect the epm_preserve_maps parameter, however.)

{ return MapBitArray(true, false); }

SetPreserveMapSettings()

virtual void SetPreserveMapSettings ( const MapBitArray &  mapSettings )

inlinevirtual

Sets the Preserve settings for all map channels.

(Does not affect the epm_preserve_maps parameter, however.)

{ }

EpModSetPreserveMap()

virtual void EpModSetPreserveMap ( int  mapChannel, bool  preserve  )

inlinevirtual

Sets whether a particular map channel will be "preserved" in geometric operations.

(Note: This does not affect the epm_preserve_maps parameter, it just changes the setting for this particular map channel.)

{ }

EpModGetPreserveMap()

virtual bool EpModGetPreserveMap ( int  mapChannel )

inlinevirtual

Indicates whether a particular map channel is set to be "preserved" in geometric operations.

(Note: This does not indicate whether the epm_preserve_maps parameter is set to true, it only indicates the setting for this particular map channel.)

{ return (mapChannel>0); }

InvalidateDistanceCache()

virtual void InvalidateDistanceCache ( )

inlinevirtual

Invalidates the computed distances from selected vertices that are used to generate soft selections.

{ }

InvalidateSoftSelectionCache()

virtual void InvalidateSoftSelectionCache ( )

inlinevirtual

Invalidates the computed soft selections (but not the distances from selected vertices that the soft selections are based on).

{ }

EpModSetOperation()

virtual void EpModSetOperation ( int  opcode )

inlinevirtual

Sets the current operation.

Parameters

opcode

Indicates the desired operation, from the epolyModButtonOp enum above

{ }

EpModPopupDialog()

virtual void EpModPopupDialog ( int  opcode )

inlinevirtual

Sets the operation to the one given, and then pops up the operation dialog, if one exists.

{ EpModSetOperation (opcode); EpModShowOperationDialog(); }

EpModButtonOp()

virtual void EpModButtonOp ( int  opcode )

inlinevirtual

Applies the operation given, and commits to it immediately.

{ }

EpModLocalDataChanged()

virtual void EpModLocalDataChanged ( ChannelMask  channels )

inlinevirtual

Indicates to the EditPolyMod that some channels of its mesh have changed.

Forces an update of UI elements based on the mesh, such as the Number Selected display and the Smoothing Group buttons, and also notifies the Edit Poly's dependents of the change.

{ }

EpModRefreshScreen()

virtual void EpModRefreshScreen ( )

inlinevirtual

Triggers a redraw of the viewports at the current time.

{ }

EpModCommitUnlessAnimating()

virtual void EpModCommitUnlessAnimating ( TimeValue  t )

inlinevirtual

Commits to the current operation unless we're set to "animation mode" (epm_animation_mode parameter is true) and the current operation supports animation.

{ }

EpModCommit()

virtual void EpModCommit ( TimeValue  t )

inlinevirtual

Commits to the current operation, and clears any animation.

{ }

EpModCommitAndRepeat()

virtual void EpModCommitAndRepeat ( TimeValue  t )

inlinevirtual

Commits to the current operation, but maintains it as the current operation with the same settings (and any animation in those parameters).

{ }

EpModCancel()

virtual void EpModCancel ( )

inlinevirtual

Cancels the current operation.

{ }

EpModToggleCommandMode()

virtual void EpModToggleCommandMode ( int  mode )

inlinevirtual

Toggles a given command mode - if it's not currently in this mode it will enter it, otherwise it will exit it.

Parameters

mode	The command mode, from the epolyModCommandMode enum above.

{ }

EpModEnterCommandMode()

virtual void EpModEnterCommandMode ( int  mode )

inlinevirtual

Exits any previous Edit Poly command modes, and enters the command mode given.

Parameters

mode	The command mode, from the epolyModCommandMode enum above.

{ }

EpModEnterPickMode()

virtual void EpModEnterPickMode ( int  mode )

inlinevirtual

Enters the pick mode given.

Parameters

mode	The pick mode, from the epolyModPickMode enum above.

{ }

EpModGetCommandMode()

virtual int EpModGetCommandMode ( )

inlinevirtual

Retrieves the current Edit Poly command mode in use, if any.

Returns

The current command mode from the epolyModCommandMode above, or -1 if the current command mode is not any of the Edit Poly command modes.

{ return -1; }

EpModGetPickMode()

virtual int EpModGetPickMode ( )

inlinevirtual

Retrieves the current Edit Poly pick mode in use, if any.

Returns

The current pick mode (from the epolyModPickMode above), or -1 if the current pick mode is not any of the Edit Poly pick modes.

{ return -1; }

EpModGetSelection()

virtual BitArray* EpModGetSelection ( int  meshSelectionLevel, INode *  pNode = NULL  )

inlinevirtual

Returns a BitArray containing the subobject selection in the desired selection level.

Parameters

meshSelectionLevel	The MNMesh selection level, such as MNM_SL_VERTEX for vertex or MNM_SL_CURRENT for "the current level".
pNode	If this Edit Poly modifier is instanced across multiple nodes, this parameter specifies which node we're inquiring about.

Returns

A pointer to an internal BitArray containing the selection. This BitArray should not be altered! It is available for read only.

{ return NULL; }

EpModSetSelection()

virtual bool EpModSetSelection ( int  meshSelectionLevel, BitArray &  selection, INode *  pNode = NULL  )

inlinevirtual

Sets the subobject selection explicitly.

Parameters

meshSelectionLevel	The MNMesh selection level, such as MNM_SL_VERTEX for vertex or MNM_SL_CURRENT for "the current level".
selection	A BitArray containing the desired selection.
pNode	If this Edit Poly modifier is instanced across multiple nodes, this parameter specifies which node we want to set selection in.

{ return false; }

EpModSelect()

virtual bool EpModSelect ( int  meshSelectionLevel, BitArray &  selection, bool  invert = false, bool  select = true, INode *  pNode = NULL  )

inlinevirtual

Change the selection state of a subset of subobjects - select them, invert their selection, or deselect them.

Parameters

meshSelectionLevel	The MNMesh selection level, such as MNM_SL_VERTEX for vertex or MNM_SL_CURRENT for "the current level".
selection	A BitArray indicating which subobjects we want to change the selection state of.
invert	If true, the selection state of the subobjects should be inverted. Otherwise, it should be set or cleared depending on "select"
select	If true, the subobjects indicated should be selected; if false, the subobjects indicated should be deselected. Ignored if "invert" is true.
pNode	If this Edit Poly modifier is instanced across multiple nodes, this parameter specifies which node we want to set selection in.

{ return false; }

SetHitLevelOverride()

virtual void SetHitLevelOverride ( DWORD  hlo )

inlinevirtual

Force any hit-testing on the Edit Poly modifier to use the hit level given, instead of the default hit level associated with the current subobject level.

Parameters

hlo	The Hit Level - one of SUBHIT_MNVERTS, SUBHIT_MNEDGES, SUBHIT_MNFACES, or SUBHIT_MNDIAGONALS, along with SUBHIT_OPENONLY if you want to restrict hit-testing to "open" vertices or edges (ie those on borders)

Example: Edit Poly's Hinge from Edge interactive command mode uses this to hit-test on faces even though the user is in Polygon subobject level. The Cut mode uses it to hit-test on all three subobject levels, one at a time.

{ }

ClearHitLevelOverride()

virtual void ClearHitLevelOverride ( )

inlinevirtual

Clear any hit level override, and let hit-testing fall back on the normal hit level for subobject selection.

{ }

GetHitLevelOverride()

virtual DWORD GetHitLevelOverride ( )

inlinevirtual

Returns the current hit level override, or 0 if there is none.

Returns

The Hit Level - one of SUBHIT_MNVERTS, SUBHIT_MNEDGES, SUBHIT_MNFACES, or SUBHIT_MNDIAGONALS, along with SUBHIT_OPENONLY if hit-testing is restricted to "open" vertices or edges (ie those on borders)

{ return 0x0; }

CurrentHitLevel()

virtual DWORD CurrentHitLevel ( int *  selByVert = NULL )

inlinevirtual

Indicates the current hit level.

If there's a HitLevelOverride in place, that's returned; otherwise this method returns the regular hit level, which is typically the hit level for the current selection level. If "Select by vertex" is turned on, SUBHIT_MNVERTS will be returned.

Parameters

selByVert

If you specifically want to know whether "Select by vertex" is being used currently, pass a pointer to an int here. The int pointed to will be set to true if select by vertex is on, or false if not.

Returns

The Hit Level - one of SUBHIT_MNVERTS, SUBHIT_MNEDGES, SUBHIT_MNFACES, or SUBHIT_MNDIAGONALS, along with SUBHIT_OPENONLY if hit-testing is restricted to "open" vertices or edges (ie those on borders)

{ return 0x0; }

SetHitTestResult()

virtual void SetHitTestResult ( bool  ignoreNew = false )

inlinevirtual

Normally, all hit-testing on Edit Poly meshes is done on the mesh before the "current operation".

(This makes it possible to change selections underneath a Bevel or Extrude or Vertex Weld.) If you want to hit-test on the result of the current operation, you need to call this method.

Parameters

ignoreNew

Controls whether subobjects that are newly created by the current operation can be hit-tested. For instance, if the current operation is an Extrude, this controls whether or not the sides of the extrusion can generate hits.

Remarks

This is typically used in Edit Poly command modes, such as Chamfer or Extrude, after the user has entered the mode, but while the last operation might still be the "current" one, so that we can hit-test as though the current operation had already been committed. It's also used in command modes like Create Face so that we can hit-test on the freshly created vertices.

{ }

ClearHitTestResult()

virtual void ClearHitTestResult ( )

inlinevirtual

Clears any HitTestResult settings, and falls back on hit-testing before the current operation.

(See SetHitTestResult for more details.)

{ }

SetDisplayLevelOverride()

virtual void SetDisplayLevelOverride ( DWORD  dlo )

inlinevirtual

Sets the display level override, to force display of a particular type of subobject regardless of the current subobject level.

Parameters

dlo	The set of display flags to show. These are MNDISP flags, such as MNDISP_VERTTICKS, that are defined in MNMesh.h.

Example: Edit Poly's Create Face command mode uses this to show vertex ticks so that the user can see what they're clicking on.

{ }

ClearDisplayLevelOverride()

virtual void ClearDisplayLevelOverride ( )

inlinevirtual

Clear any display level override, and let hit-testing fall back on the normal display for the current selection level.

{ }

GetDisplayLevelOverride()

virtual DWORD GetDisplayLevelOverride ( )

inlinevirtual

Returns any current DisplayLevelOverride.

See SetDisplayLevelOverride for more details.

Returns

The set of display flags to show, or 0 for no override currently set. These are MNDISP flags, such as MNDISP_VERTTICKS, that are defined in MNMesh.h.

{ return 0x0; }

ForceIgnoreBackfacing()

virtual void ForceIgnoreBackfacing ( bool  force )

inlinevirtual

This method is used to temporarily force the Edit Poly to ignore backfacing subobjects when hit-testing.

Parameters

force

True to force ignoring backfacing, false to fall back on normal hit-testing.

{ }

GetForceIgnoreBackfacing()

virtual bool GetForceIgnoreBackfacing ( )

inlinevirtual

Indicates whether or not the Edit Poly is currently set to force ignoring backfacing subobjects.

See ForceIgnoreBackfacing for details.

{ return false; }

EpModMoveSelection()

virtual void EpModMoveSelection ( Point3 &  val, Matrix3 &  partm, Matrix3 &  tmAxis, BOOL  localOrigin, TimeValue  t  )

inlinevirtual

Move the current subobject selection.

This method uses the current selection and soft selection, and respects the settings for Constraints and for Preserving texture maps.

Parameters

val	The Point3 representing the move.
partm	The 'parent' transformation matrix.
tmAxis	The matrix that represents the axis system. This is the space in which the transformation is taking place.
localOrigin	This parameter is ignored
t	The time at which to move the points. This time is used to generate vertex animation keys, if appropriate, as well as to obtain the current soft selection parameters.

{ }

EpModRotateSelection()

virtual void EpModRotateSelection ( Quat &  val, Matrix3 &  partm, Matrix3 &  tmAxis, BOOL  localOrigin, TimeValue  t  )

inlinevirtual

Rotate the current subobject selection.

This method uses the current selection and soft selection, and respects the settings for Constraints and for Preserving texture maps.

Parameters

val	The Quaternion representing the rotation.
partm	The 'parent' transformation matrix.
tmAxis	The matrix that represents the axis system. This is the space in which the transformation is taking place.
localOrigin	This parameter is ignored
t	The time at which to rotate the points. This time is used to generate vertex animation keys, if appropriate, as well as to obtain the current soft selection parameters.

{ }

EpModScaleSelection()

virtual void EpModScaleSelection ( Point3 &  val, Matrix3 &  partm, Matrix3 &  tmAxis, BOOL  localOrigin, TimeValue  t  )

inlinevirtual

Scale the current subobject selection.

This method uses the current selection and soft selection, and respects the settings for Constraints and for Preserving texture maps.

Parameters

val	A Point3 representing the scale in each dimension.
partm	The 'parent' transformation matrix.
tmAxis	The matrix that represents the axis system. This is the space in which the transformation is taking place.
localOrigin	This parameter is ignored
t	The time at which to scale the points. This time is used to generate vertex animation keys, if appropriate, as well as to obtain the current soft selection parameters.

{ }

EpModMoveSlicePlane()

virtual void EpModMoveSlicePlane ( Point3 &  val, Matrix3 &  partm, Matrix3 &  tmAxis, TimeValue  t  )

inlinevirtual

Move the Slice Plane that's used in the ep_op_slice and ep_op_slice_face operations.

Parameters

val	The Point3 representing the move.
partm	The 'parent' transformation matrix.
tmAxis	The matrix that represents the axis system. This is the space in which the transformation is taking place.
t	The time at which to move the plane. This time is used to generate animation keys, if appropriate.

{ }

EpModRotateSlicePlane()

virtual void EpModRotateSlicePlane ( Quat &  val, Matrix3 &  partm, Matrix3 &  tmAxis, BOOL  localOrigin, TimeValue  t  )

inlinevirtual

Rotate the Slice Plane that's used in the ep_op_slice and ep_op_slice_face operations.

Parameters

val	The Quaternion representing the rotation.
partm	The 'parent' transformation matrix.
tmAxis	The matrix that represents the axis system. This is the space in which the transformation is taking place.
localOrigin	When TRUE the transformation is occurring about the sub-object's local origin; otherwise, the rotation occurs in object space.
t	The time at which to move the plane. This time is used to generate animation keys, if appropriate.

{ }

EpModScaleSlicePlane()

virtual void EpModScaleSlicePlane ( Point3 &  val, Matrix3 &  partm, Matrix3 &  tmAxis, BOOL  localOrigin, TimeValue  t  )

inlinevirtual

Scale the Slice Plane that's used in the ep_op_slice and ep_op_slice_face operations.

Note that scaling the slice plane with localOrigin == true has no effect on the actual slice effect; it only affects the way the slice plane is displayed.

Parameters

val	The Point3 representing the scale in each dimension.
partm	The 'parent' transformation matrix.
tmAxis	The matrix that represents the axis system. This is the space in which the transformation is taking place.
localOrigin	When TRUE the transformation is occurring about the sub-object's local origin; otherwise, the scale occurs in object space.
t	The time at which to move the plane. This time is used to generate animation keys, if appropriate.

{ }

EpResetSlicePlane()

virtual void EpResetSlicePlane ( )

inlinevirtual

Resets the slice plane used in the slice operations so that it lies in the XY plane in object space.

{ }

EpGetSlicePlaneTM()

virtual Matrix3 EpGetSlicePlaneTM ( TimeValue  t )

inlinevirtual

Returns the current transform of the slice plane.

{ return Matrix3{}; }

EpGetSlicePlane()

virtual void EpGetSlicePlane ( Point3 &  planeNormal, Point3 &  planeCenter, TimeValue  t  )

inlinevirtual

Retrieves the current slice plane, by its normal and center.

{ }

EpSetSlicePlane()

virtual void EpSetSlicePlane ( Point3 &  planeNormal, Point3 &  planeCenter, TimeValue  t  )

inlinevirtual

Sets the slice plane to use the normal and center given.

{ }

EpInSliceMode()

virtual bool EpInSliceMode ( )

inlinevirtual

Indicates if we're currently in the "Slice Plane" mode, which is not a command mode, but rather a different way of handling the regular (move, rotate, scale) command modes.

{ return false; }

EpInSlice()

virtual bool EpInSlice ( )

inlinevirtual

Indicates if we're currently in a Slice operation (ep_op_slice or ep_op_slice_face).

{ return false; }

GetModifier()

virtual Modifier* GetModifier ( )

pure virtual

Returns the Edit Poly cast as a modifier.

EpModGetIP()

virtual IObjParam* EpModGetIP ( )

inlinevirtual

Returns NULL if the Edit Poly is not currently up in the modifier panel, or the IObjParam interface pointer otherwise.

{ return NULL; }

GetDlgHandle()

virtual HWND GetDlgHandle ( int  paramPanelID )

inlinevirtual

Returns the handle of the dialog specified.

Parameters

paramPanelID

This is an int representing the ID of the dialog. This enum should be moved to this header, but currently it resides in maxsdk/samples/mesh/EditPoly/EditPoly.h. Here are the IDs: 0 - ep_animate - The dialog displaying the current operation, and controlling whether we're in model or animate mode 1 - ep_select - The subobject selection dialog 2 - ep_softsel - The soft selection dialog 3 - ep_geom - The dialog with general Edit Geometry operations, such as Create, Collapse, and Attach. 4 - ep_subobj - The subobject level specific Edit dialog, such as "Edit Vertex" or "Edit Borders", 5 - ep_surface - The face-level dialog for editing surface material surface features 6 - ep_settings - The popup dialog with settings for the current operation 7 - ep_paintdeform - the Paint Deformation dialog. 8 - ep_face_smooth - The face-level dialog for editing smoothing groups. If the dialog you're requesting is not currently displayed, NULL will be returned.

Example: The Edit Poly command modes use this method to access the buttons for their command mode, to set them to checked when entering the command mode and unchecked when leaving.

{ return NULL; }

UpdateAlignParameters()

virtual void UpdateAlignParameters ( TimeValue  t )

inlinevirtual

Updates the Align normal and offset parameters based on the current viewport and on the ep_align_type parameter.

If there's no viewport available, method does nothing.

{ }

UpdateCache()

virtual void UpdateCache ( TimeValue  t )

inlinevirtual

Makes sure that all the LocalModData used by the Edit Poly modifiers has an up to date cache.

This should be called before trying to obtain information about the mesh.

{ }

EpModShowOperationDialog()

virtual bool EpModShowOperationDialog ( )

inlinevirtual

Show the popup dialog associated with the current operation.

Does nothing if there is no current operation, or if the current operation has no associated popup dialog.

Returns

True if we succeeded in displaying a popup dialog, false if we couldn't find one to display.

{ return false; }

EpModShowingOperationDialog()

virtual bool EpModShowingOperationDialog ( )

inlinevirtual

Indicates whether or not there is currently a popup dialog being displayed with parameters for the current operation.

{ return false; }

EpModCloseOperationDialog()

virtual void EpModCloseOperationDialog ( )

inlinevirtual

Close the popup dialog which shows the current operation's parameters, if it's currently being displayed.

{ }

EpModRepeatLast()

virtual void EpModRepeatLast ( )

inlinevirtual

Repeat the last operation.

If there is a "current" operation, it will be committed and repeated, without changing any parameters or removing any animations. If there is not, the last recorded operation, if any, will be applied and committed. (In Max 7.0, unfortunately, the identity of this last operation is not exposed in the SDK. You can examine it in the Edit Poly source, maxsdk/samples/mesh/EditPoly, the EditPolyMod::mLastOperation data member.

{ }

EpModGetPrimaryNode()

virtual INode* EpModGetPrimaryNode ( )

inlinevirtual

Get the current "Primary" node, which is used by default when node-specific commands are given and the node given is NULL.

{ return NULL; }

EpModSetPrimaryNode()

virtual void EpModSetPrimaryNode ( INode *  node )

inlinevirtual

Set the current "Primary" node, which is used by default when node-specific commands are given and the node given is NULL.

{ }

EpModGetNodeTM()

virtual Matrix3 EpModGetNodeTM ( TimeValue  t, INode *  node = NULL  )

inlinevirtual

Retrieve the transform of the Edit Poly's node.

Parameters

t	The time at which to retrieve the node's TM.
node	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

If the node is given, we just return node->GetObjectTM (t). This method is more interesting when you just want to know what the TM is of the primary node, without bothering to retrive it.

{ return Matrix3{}; }

EpModGetNodeTM_FPS()

Matrix3 EpModGetNodeTM_FPS ( INode *  node = NULL, TimeValue  t = 0  )

inline

{ return EpModGetNodeTM(t,node); }

EpModCreateVertex()

virtual int EpModCreateVertex ( Point3  p, INode *  pNode = NULL  )

inlinevirtual

Create a new vertex in the mesh.

Parameters

p	The location of the vertex in object space
pNode	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Returns

The (0-based) index of the newly created vertex

{ return 0; }

EpModCreateFace()

virtual int EpModCreateFace ( Tab< int > *  vertex, INode *  pNode = NULL  )

inlinevirtual

Create a new face in the mesh.

Parameters

vertex	A table of the vertices to use as the corners of the face
pNode	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Returns

The (0-based) index of the newly created face

{ return 0; }

EpModCreateEdge()

virtual int EpModCreateEdge ( int  v1, int  v2, INode *  pNode = NULL  )

inlinevirtual

Create a new edge in the mesh.

The vertices which we're creating a new edge between must be on the same polygon, but not have an existing edge between them. The polygon is split in two by the new edge.

Parameters

v1	The start vertex of the new edge.
v2	The end vertex of the new edge.
pNode	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Returns

The (0-based) index of the newly created edge

{ return 0; }

EpModSetDiagonal()

virtual void EpModSetDiagonal ( int  v1, int  v2, INode *  pNode = NULL  )

inlinevirtual

Change the triangulation of a polygon such that there will be a diagonal between the two vertices given.

(The two vertices must obviously be used by the same polygon.)

Parameters

v1	The start vertex of the new diagonal.
v2	The end vertex of the new diagonal.
pNode	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Example: This is used in the Edit Poly "Edit Triangulation" command mode

{ }

EpModCut()

virtual void EpModCut ( int  startLevel, int  startIndex, Point3  startPoint, Point3  normal, INode *  pNode = NULL  )

inlinevirtual

Set up a Cut operation, starting at a specific subobject and at a specific point.

(Use EpModSetCutEnd to finish the cut.)

Parameters

startLevel	The starting subobject level, which should be an MNMesh level such as MNM_SL_VERTEX for vertex or MNM_SL_FACE for face.
startIndex	The index of the starting subobject. For instance, if startLevel==MNM_SL_EDGE, and startIndex==4, the Cut should start on edge 4.
startPoint	The location (in object space) of the start of the cut. The end of the cut is also initialized to this value, and can be further modified by using EpModSetCutEnd.
normal	The normal direction for the Cut. In the Cut command mode, this is generally set to the viewport direction. Cuts should occur where the plane defined by the start point, the end point, and this normal intersects the mesh.
pNode	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModSetCutEnd()

virtual void EpModSetCutEnd ( Point3  endPoint, INode *  pNode = NULL  )

inlinevirtual

Set the end point of a cut.

Parameters

endPoint	The location of the end of the Cut, in object space
pNode	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModGetLastCutEnd()

virtual int EpModGetLastCutEnd ( )

inlinevirtual

If the last Cut we made finished successfully, this method will return the index of the vertex at the end of the cut.

If there was no previous Cut or if it couldn't reach all the way to the desired end point, this method will return -1.

Example: The Cut mode uses this method to generate a series of sequential cuts, where each cut begins exactly on the vertex at the end of the last cut.

{ return -1; }

EpModClearLastCutEnd()

virtual void EpModClearLastCutEnd ( )

inlinevirtual

Resets the "last cut end" data to -1.

(See EpModGetLastCutEnd for more details.)

{ }

EpModCutCancel()

virtual void EpModCutCancel ( INode *  pNode = NULL )

inlinevirtual

Please ignore - this method was never implemented, it does nothing.

At some point in the future, it may be used to cancel out of a cut, but this probably isn't necessary since EpModCancel does that effectively.

{ }

EpModDivideEdge()

virtual void EpModDivideEdge ( int  edge, float  prop, INode *  pNode = NULL  )

inlinevirtual

Divides edge, inserting a vertex partway along its length.

Used in the Edit Poly "Insert Vertex" mode in the Edge subobject level.

Parameters

edge	The edge to divide
prop	The proportion along the edge for the location of the new vertex. This should be in the range 0-1, where 0 is on top of the edge's v1 vertex, 1 is on top of the v2 vertex, and .5 is exactly in the middle.
pNode	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModDivideFace()

virtual void EpModDivideFace ( int  face, Tab< float > *  bary, INode *  pNode = NULL  )

inlinevirtual

Divides the face, inserting a vertex in it and splitting the face up into triangles connecting the new vertex with all the face's original edges.

Parameters

face	The face to divide
bary	A set of weights for the corners of the face. This table should have Count equal to the face's degree, and its values should add up to 1. NULL is not permitted. If you want a vertex in the center of the polygon, set all values to 1.0f / (face degree).
pNode	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModWeldVerts()

virtual void EpModWeldVerts ( int  v1, int  v2, INode *  pNode = NULL  )

inlinevirtual

Weld two vertices.

In order for the operation to succeed, the vertices must either share an edge, or both be on borders. Success can be detected by checking vertex v2's MN_DEAD flag after the operation - if it's set, the weld succeeded.

Parameters

v1	index of the first vertex
v2	index of the second vertex
pNode	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModWeldEdges()

virtual void EpModWeldEdges ( int  e1, int  e2, INode *  pNode = NULL  )

inlinevirtual

Weld two edges (by welding the vertex endpoints).

In order for the operation to succeed, both edges must be on borders - their "f2" face should be empty (-1). Success can be detected by checking edge e2's MN_DEAD flag after the operation - if it's set, the weld succeeded.

Parameters

e1	index of the first edge
e2	index of the second edge
pNode	The specific node to use, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModAttach()

virtual void EpModAttach ( INode *  node, INode *  pNode = NULL, TimeValue  t = 0  )

inlinevirtual

Attach another mesh to this one.

Parameters

node	The node containing the mesh to attach. (If the object contained is not a mesh, it will be converted to a mesh.)
pNode	The specific node to attach to, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.
t	The time at which to attach it. (This is the time at which the other node is evaluated, which may be important if the other node is animated.)

Remarks

Note that this method deletes the original node which is being attached.

{ }

EpModMultiAttach()

virtual void EpModMultiAttach ( Tab< INode * > &  nodeTab, INode *  pNode = NULL, TimeValue  t = 0  )

inlinevirtual

Attach a bunch of other meshes to this one.

Parameters

nodeTab	The table of nodes containing the meshes to attach. (If the object contained is not a mesh, it will be converted to a mesh.)
pNode	The specific node to attach to, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.
t	The time at which to attach it. (This is the time at which the other nodes are evaluated, which may be important if the other nodes are animated.)

Remarks

Note that this method deletes the original nodes which are being attached.

{ }

EpModDetachToObject()

virtual void EpModDetachToObject ( MSTR &  newObjectName, TimeValue  t  )

inlinevirtual

Detaches the current selection to a new Editable Poly object.

Remarks

If this Edit Poly modifier is instanced across multiple nodes, a new Editable Poly object will be created for each node.

{ }

EpModCreateShape()

virtual void EpModCreateShape ( MSTR &  shapeObjectName, TimeValue  t  )

inlinevirtual

Creates a shape object based on the current set of selected edges.

Remarks

Note that control over whether the resulting shape is curved or linear is not currently exposed in the SDK. It's controlled by the static EditPolyMod variable "mCreateShapeType", which you can find in the Edit Poly source in maxsdk/samples/mesh/EditPoly.

{ }

EpModSetHingeEdge()

virtual void EpModSetHingeEdge ( int  edge, Matrix3  modContextTM, INode *  pNode = NULL  )

inlinevirtual

Sets the Hinge from Edge operation to use the hinge edge given.

Parameters

edge	The edge to use as a hinge
modContextTM	The mod context TM for the node containing the edge. This is important when the Edit Poly is instanced across multiple nodes, because the coordinates of the edge are used to hinge the faces in the other nodes as well. We need to get these coordinates in some common reference frame, which is what the mod context tm is used for.
pNode	The specific node which contains the hinge, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModGetHingeEdge()

virtual int EpModGetHingeEdge ( INode *  pNode )

inlinevirtual

Retrieves the current Hinge Edge, or -1 if no hinge edge is set (or if it's set on a different node).

Note that if the Edit Poly is instanced across multiple nodes, only one node should contain a hinge edge.

Parameters

pNode

The specific node which we're referring to, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ return -1; }

EpModBridgeBorders()

virtual void EpModBridgeBorders ( int  edge1, int  edge2, INode *  pNode = NULL  )

inlinevirtual

Create a Bridge between two border loops.

Parameters

edge1	An edge on the first border loop
edge2	An edge on the second border loop
pNode	The specific node which we're referring to, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModBridgePolygons()

virtual void EpModBridgePolygons ( int  face1, int  face2, INode *  pNode = NULL  )

inlinevirtual

Parameters

face1	index of the first face to bridge
face2	index of the second face to bridge
pNode	The specific node which we're referring to, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModSetBridgeNode()

virtual void EpModSetBridgeNode ( INode *  pNode )

inlinevirtual

{ }

EpModGetBridgeNode()

virtual INode* EpModGetBridgeNode ( )

inlinevirtual

{ return NULL; }

EpModReadyToBridgeSelected()

virtual bool EpModReadyToBridgeSelected ( )

inlinevirtual

{ return false; }

EpModTurnDiagonal()

virtual void EpModTurnDiagonal ( int  faceIndex, int  diagonal, INode *  pNode = NULL  )

inlinevirtual

Parameters

faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1.
diagonal	The index of the diagonal - between 0 and EpMeshGetFaceDegree(faceIndex, pNode)-4. (There are always n-3 diagonals in a polygon of degree n.)
pNode	The specific node which we're referring to, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModListOperations()

virtual void EpModListOperations ( INode *  pNode = NULL )

inlinevirtual

Lists the entire history of applied operations to the Maxscript listener window.

This is not quite adequate for recreating the Edit Poly in a script, because some information is omitted; but it'

Parameters

pNode

The specific node which we're referring to, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ }

EpModGetMesh()

virtual MNMesh* EpModGetMesh ( INode *  pNode = NULL )

inlinevirtual

Get a pointer to the Edit Poly's cached mesh.

This is the mesh after all the committed operations, but before the current operation, if any. The mesh returned from this method should not be modified!

Parameters

pNode

The specific node which we want the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ return NULL; }

EpModGetOutputMesh()

virtual MNMesh* EpModGetOutputMesh ( INode *  pNode = NULL )

inlinevirtual

Get a pointer to the Edit Poly's cached output mesh.

This is the mesh after all committed operations as well as the current operation, if any. The mesh returned from this method should not be modified!

Parameters

pNode

The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

{ return NULL; }

EpMeshGetNumVertices()

virtual int EpMeshGetNumVertices ( INode *  pNode = NULL )

inlinevirtual

Returns the number of vertices in the mesh.

Parameters

pNode

The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetVertex()

virtual Point3 EpMeshGetVertex ( int  vertIndex, INode *  pNode = NULL  )

inlinevirtual

Returns the position (in object space) of a particular vertex in the mesh.

Parameters

vertIndex	The index of the vertex - between 0 and EpMeshGetNumVertices(pNode)-1.
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return Point3(0,0,0); }

EpMeshGetVertexFaceCount()

virtual int EpMeshGetVertexFaceCount ( int  vertIndex, INode *  pNode = NULL  )

inlinevirtual

Returns the number of faces using a particular vertex.

Parameters

vertIndex	The index of the vertex - between 0 and EpMeshGetNumVertices(pNode)-1.
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetVertexFace()

virtual int EpMeshGetVertexFace ( int  vertIndex, int  whichFace, INode *  pNode = NULL  )

inlinevirtual

Returns a face that uses the vertex given.

Parameters

vertIndex	The index of the vertex - between 0 and EpMeshGetNumVertices(pNode)-1.
whichFace	The index of the face - between 0 and EpMeshGetVertexFaceCount(vertIndex, pNode)-1
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetVertexEdgeCount()

virtual int EpMeshGetVertexEdgeCount ( int  vertIndex, INode *  pNode = NULL  )

inlinevirtual

Returns the number of edges using a particualr vertex.

Parameters

vertIndex	The index of the vertex - between 0 and EpMeshGetNumVertices(pNode)-1.
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetVertexEdge()

virtual int EpMeshGetVertexEdge ( int  vertIndex, int  whichEdge, INode *  pNode = NULL  )

inlinevirtual

Returns one of the edges using the vertex given.

Parameters

vertIndex	The index of the vertex - between 0 and EpMeshGetNumVertices(pNode)-1.
whichEdge	The index of the edge - between 0 and EpMeshGetVertexEdgeCount(vertIndex, pNode)-1
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetNumEdges()

virtual int EpMeshGetNumEdges ( INode *  pNode = NULL )

inlinevirtual

Returns the number of edges in the mesh.

Parameters

pNode

The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetEdgeVertex()

virtual int EpMeshGetEdgeVertex ( int  edgeIndex, int  end, INode *  pNode = NULL  )

inlinevirtual

Returns the vertex at one end of the edge given.

Parameters

edgeIndex	The index of the edge - between 0 and EpMeshGetNumEdges(pNode)-1.
end	The end of the edge - 0 or 1
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetEdgeFace()

virtual int EpMeshGetEdgeFace ( int  edgeIndex, int  side, INode *  pNode = NULL  )

inlinevirtual

Returns the face on one side of the edge given.

Parameters

edgeIndex	The index of the edge - between 0 and EpMeshGetNumEdges(pNode)-1.
side	The side of the edge. Edges are guaranteed to have a face on side 0, but "border" edges have no face on side 1. "No face" is indicated by a return value of -1.
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetNumFaces()

virtual int EpMeshGetNumFaces ( INode *  pNode = NULL )

inlinevirtual

Returns the number of faces in the mesh.

Parameters

pNode

The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetFaceDegree()

virtual int EpMeshGetFaceDegree ( int  faceIndex, INode *  pNode = NULL  )

inlinevirtual

Returns the degree of the indicated face.

Parameters

faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1.
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetFaceVertex()

virtual int EpMeshGetFaceVertex ( int  faceIndex, int  corner, INode *  pNode = NULL  )

inlinevirtual

Returns the vertex in a particular corner of a particular face.

Parameters

faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1.
corner	The corner of the face - between 0 and EpMeshGetFaceDegree(faceIndex,pNode)-1
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any. The relationship between sides and corners of the polygon is: side i goes from corner i to corner (i+1)degree.

{ return 0; }

EpMeshGetFaceEdge()

virtual int EpMeshGetFaceEdge ( int  faceIndex, int  side, INode *  pNode = NULL  )

inlinevirtual

Returns the edge on a particular side of a particular face.

Parameters

faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1.
side	The side of the face - between 0 and EpMeshGetFaceDegree(faceIndex,pNode)-1
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any. The relationship between sides and corners of the polygon is: side i goes from corner i to corner (i+1)degree.

{ return 0; }

EpMeshGetFaceDiagonal()

virtual int EpMeshGetFaceDiagonal ( int  faceIndex, int  diagonal, int  end, INode *  pNode = NULL  )

inlinevirtual

Returns the index of the corner used at an end of a face diagonal.

Parameters

faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1.
diagonal	The index of the diagonal - between 0 and EpMeshGetFaceDegree(faceIndex, pNode)-4. (There are always n-3 diagonals in a polygon of degree n.)
end	0 for the start of the diagonal, 1 for the end.
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Returns

The index of the corner of the face. To get the index of the vertex at that corner, call EpMeshGetFaceVertex on this result.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetFaceMaterial()

virtual int EpMeshGetFaceMaterial ( int  faceIndex, INode *  pNode = NULL  )

inlinevirtual

Returns the material ID used by a particular face.

Parameters

faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1.
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetFaceSmoothingGroup()

virtual DWORD EpMeshGetFaceSmoothingGroup ( int  faceIndex, INode *  pNode = NULL  )

inlinevirtual

Returns the smoothing groups used by a particular face.

Parameters

faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1.
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetNumMapChannels()

virtual int EpMeshGetNumMapChannels ( INode *  pNode = NULL )

inlinevirtual

Returns the number of positive map channels in the mesh.

This number depends on the map channels that are active, or have been in the past. Default is 2, typically it's in the single digits, but it can range as high as MAX_MESHMAPS. (These channels need not all be active - this method just gives an upper bound on the index of active map channels.)

Parameters

pNode

The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetMapChannelActive()

virtual bool EpMeshGetMapChannelActive ( int  mapChannel, INode *  pNode = NULL  )

inlinevirtual

Indicates if the specified map channel is "active", that is, if it contains a set of map coordinates and map faces.

Parameters

mapChannel	The index of the map channel, which can range from -NUM_HIDDENMAPS to EpMeshGetNumMapChannels(pNode)-1.
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return false; }

EpMeshGetNumMapVertices()

virtual int EpMeshGetNumMapVertices ( int  mapChannel, INode *  pNode = NULL  )

inlinevirtual

Returns the number of map vertices in the specified map.

This is typically larger than the number of regular vertices in the mesh, though it can be the same or lower. Returns 0 for inactive maps.

Parameters

mapChannel	The index of the map channel, which can range from -NUM_HIDDENMAPS to EpMeshGetNumMapChannels(pNode)-1.
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpMeshGetMapVertex()

virtual UVVert EpMeshGetMapVertex ( int  mapChannel, int  vertIndex, INode *  pNode = NULL  )

inlinevirtual

Returns the UVVert map vertex position for a given map channel and map vertex index.

Parameters

mapChannel	The index of the map channel, which can range from -NUM_HIDDENMAPS to EpMeshGetNumMapChannels(pNode)-1.
vertIndex	The index of the map vertex, in the range of 0 to EpMeshGetNumMapVertices(mapChannel,pNode)-1
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return UVVert(0,0,0); }

EpMeshGetMapFaceVertex()

virtual int EpMeshGetMapFaceVertex ( int  mapChannel, int  faceIndex, int  corner, INode *  pNode = NULL  )

inlinevirtual

Returns the index of the map vertex used in a particular corner of a particular map face (in a particular map).

Parameters

mapChannel	The index of the map channel, which can range from -NUM_HIDDENMAPS to EpMeshGetNumMapChannels(pNode)-1.
faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1. (All map channels have the same number of faces as the mesh.)
corner	The corner of the face - between 0 and EpMeshGetFaceDegree(faceIndex,pNode)-1. (Each map face has the same degree as the corresponding mesh face.)
pNode	The specific node to get the mesh from, in cases where the Edit Poly is instanced across multiple nodes. If left at NULL, the Primary node is used. (See EpModSetPrimaryNode.) If no primary node has yet been established, one is picked arbitrarily. If the Edit Poly is only used by one node, you may safely leave this at NULL.

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EpModBridgeEdges()

virtual void EpModBridgeEdges ( const int  in_edge1, const int  in_edge2, INode *  in_pNode = NULL  )

inlinevirtual

Bridges individual edges, will use current parameters.

Parameters

[in]	in_edge1	The source of the bridge operation
[in]	in_edge2	The target of the bridge operation
[in]	in_pNode	The node to which the bridge is applied

{ }

EpModUpdateRingEdgeSelection()

virtual void EpModUpdateRingEdgeSelection ( int  in_val, INode *  in_pNode = NULL  )

inlinevirtual

Changea the edge selection in the ring direction.

{ }

EpModUpdateLoopEdgeSelection()

virtual void EpModUpdateLoopEdgeSelection ( int  in_val, INode *  in_pNode = NULL  )

inlinevirtual

Changes the edge selection in the loop direction.

Parameters

[in]	in_val	Specifies which way the current edge selection is changed. it can take the values : RING_UP: Moves the selection one edge up in the ring direction LOOP_UP: Moves the selection one edge up in the loop direction RING_DOWN: Moves the selection one edge down in the ring direction LOOP_DOWN: Moves the selection one edge up in the loop direction RING_UP_ADD: Adds to the selection one edge in the up ring direction LOOP_UP_ADD: Adds to the selection one edge in the up loop direction RING_DOWN_ADD: Adds to the selection one edge in the down ring direction LOOP_DOWN_ADD: Adds to the selection one edge in the down loop direction RING_UP_SUBTRACT: Subtracts to the selection one edge in the up ring direction LOOP_UP_SUBTRACT: Subtracts to the selection one edge in the up loop direction RING_DOWN_SUBTRACT: Subtracts to the selection one edge in the down ring direction LOOP_DOWN_SUBTRACT: Subtracts to the selection one edge in the down loop direction
[in]	in_pNode	The node to which the bridge is applied

{ }

EpModSetRingShift()

virtual void EpModSetRingShift ( int  in_newPos, bool  in_moveOnly, bool  in_add  )

inlinevirtual

Changes the edge selection , in the ring direction.

This method adds ( move or remove ) edges from the current selection.
n the 'positive' ( or negative ) ring direction,using the 3 existing parameters. The ring direction is vertical for a plane.
If in_newPos == -3 , in_moveOnly == false and in_add == true, it adds 3 edges from the current selection,
in the negative ring direction. this is equivalent to the MaxScript: $.setRingShift -3 false true

Parameters

[in]	in_newPos	If > 0 will change the edge selection the 'positive' ring direction, if < 0 in the 'negative' direction.
[in]	in_moveOnly	If true, edges are moved, if false, edges are added or removed from selection
[in]	in_add	If true edges are added, if false, edges are removed from current selection

{}

EpModSetLoopShift()

virtual void EpModSetLoopShift ( int  in_newPos, bool  in_moveOnly, bool  in_add  )

inlinevirtual

Changes the edge selection , in the loop direction.

This method adds ( move or remove ) edges from the current selection.
n the 'positive' ( or negative ) loop direction,using the 3 existing parameters. The loop direction is horizontal for a plane.
If in_newPos == -3 , in_moveOnly == false and in_add == true, it adds 3 edges from the current selection,
in the negative ring direction. this is equivalent to the MaxScript: $.setLoopShift -3 false true

Parameters

[in]	in_newPos	If > 0 will change the edge selection the 'positive' ring direction, if < 0 in the 'negative' direction.
[in]	in_moveOnly	If true, edges are moved, if false, edges are added or removed from selection
[in]	in_add	If true edges are added, if false, edges are removed from current selection

{}

EpModConvertSelectionToBorder()

virtual int EpModConvertSelectionToBorder ( int  in_epSelLevelFrom, int  in_epSelLevelTo  )

inlinevirtual

Converts current sub-object selection to the specified sub-object border.

It converts for instance selected faces into their border edges and selects it,
if you call EpModConvertSelectionToBorder( EPM_SL_FACE, EPM_SL_EDGE);

Parameters

[in]	in_epSelLevelFrom	Can be EPM_SL_EDGE, EPM_SL_FACE or EPM_SL_VERTEX
[in]	in_epSelLevelTo	Can be EPM_SL_EDGE, EPM_SL_FACE or EPM_SL_VERTEX

{ return 0; }

EpModPaintDeformCommit()

virtual void EpModPaintDeformCommit ( )

inlinevirtual

Commits any Paint Deformation as if pressing the Commit button.

Has no effect when the Commit button is disabled

{}

EpModPaintDeformCancel()

virtual void EpModPaintDeformCancel ( )

inlinevirtual

Reverts any Paint Deformation as if pressing the Revert button.

Has no effect when the Revert button is disabled

{}

EPMeshGetFaceNormal()

virtual Point3 EPMeshGetFaceNormal ( const int  in_faceIndex, INode *  in_pNode = NULL  )

inlinevirtual

Returns the normal of the face specified.

Parameters

[in]	in_faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1.
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return Point3(0,0,0); }

EPMeshGetFaceCenter()

virtual Point3 EPMeshGetFaceCenter ( const int  in_faceIndex, INode *  in_pNode = NULL  )

inlinevirtual

Returns the center of the face specified.

Parameters

[in]	in_faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1.
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return Point3(0,0,0); }

EPMeshGetFaceArea()

virtual float EPMeshGetFaceArea ( const int  in_faceIndex, INode *  in_pNode = NULL  )

inlinevirtual

Returns the area of the face specified.

Parameters

[in]	in_faceIndex	The index of the face - between 0 and EpMeshGetNumFaces(pNode)-1.
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0.0f; }

EPMeshGetOpenEdges()

virtual BitArray* EPMeshGetOpenEdges ( INode *  in_pNode = NULL )

inlinevirtual

Returns a list of edges that are adjacent to at least one empty face.

Parameters

[in]

in_pNode

Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return NULL; }

EPMeshGetVertsByFlag()

virtual bool EPMeshGetVertsByFlag ( BitArray &  out_vset, const DWORD  in_flags, const DWORD  in_fmask = 0x0, INode *  in_pNode = NULL  )

inlinevirtual

These methods retrieve the parts of the object that match the specified flags and mask passed in.

Retrieves the vertices specified the flag and mask, and updates the bitarray passed in

Parameters

[out]	out_vset	The BitArray passed by reference - the bits will be updated to show the specified vertices
[in]	in_flags	The flags that are to be checked for
[in]	in_fmask	The results will use the bitwise-AND of fmask and flags if it is specified
	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return false; }

EPMeshGetEdgesByFlag()

virtual bool EPMeshGetEdgesByFlag ( BitArray &  out_eset, const DWORD  in_flags, const DWORD  in_fmask = 0x0, INode *  in_pNode = NULL  )

inlinevirtual

Retrieves the edges specified the flag and mask, and updates the bitarray passed in.

Parameters

[out]	out_eset	The BitArray passed by reference - the bits will be updated to show the specified edges
[in]	in_flags	The flags that are to be checked for
[in]	in_fmask	The results will use the bitwise-AND of fmask and flags if it is specified
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return false; }

EPMeshGetFacesByFlag()

virtual bool EPMeshGetFacesByFlag ( BitArray &  out_fset, const DWORD  in_flags, const DWORD  in_fmask = 0x0, INode *  in_pNode = NULL  )

inlinevirtual

Retrieves the faces specified the flag and mask, and updates the bitarray passed in.

Parameters

[out]	out_fset	The BitArray passed by reference - the bits will be updated to show the specified faces
[in]	in_flags	The flags that are to be checked for
[in]	in_fmask	The results will use the bitwise-AND of fmask and flags if it is specified
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return false; }

EPMeshSetVertexFlags()

virtual void EPMeshSetVertexFlags ( BitArray &  in_vset, const DWORD  in_flags, DWORD  in_fmask = 0x0, const bool  in_undoable = true, INode *  in_pNode = NULL  )

inlinevirtual

These methods set the flags on the specified subobjects to match the flags and mask passed in.

Sets the specified vertices flags to the specified value

Parameters

[in]	in_vset	The list of vertices to have their flag changed
[in]	in_flags	The flags that are to be set
[in]	in_fmask	The results will use the bitwise-AND of fmask and flags if it is specified
[in]	in_undoable	Can the results of this operation be undone through the normal method
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

{ return; }

EPMeshSetEdgeFlags()

virtual void EPMeshSetEdgeFlags ( BitArray &  in_eset, const DWORD  in_flags, DWORD  in_fmask = 0x0, const bool  in_undoable = true, INode *  in_pNode = NULL  )

inlinevirtual

Sets the specified vertices flags to the specified value.

Parameters

[in]	in_eset	The list of edges to have their flag changed
[in]	in_flags	The flags that are to be set
[in]	in_fmask	The results will use the bitwise-AND of fmask and flags if it is specified
[in]	in_undoable	Can the results of this operation be undone through the normal method
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

{ return; }

EPMeshSetFaceFlags()

virtual void EPMeshSetFaceFlags ( BitArray &  in_fset, const DWORD  in_flags, DWORD  in_fmask = 0x0, const bool  in_undoable = true, INode *  in_pNode = NULL  )

inlinevirtual

Sets the specified faces flags to the specified value.

Parameters

[in]	in_fset	The list of faces to have their flag changed
[in]	in_flags	The flags that are to be set
[in]	in_fmask	The results will use the bitwise-AND of fmask and flags if it is specified
[in]	in_undoable	Can the results of this operation be undone through the normal method
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

{ return; }

EPMeshGetVertexFlags()

virtual int EPMeshGetVertexFlags ( const int  in_vertexIndex, INode *  in_pNode = NULL  )

inlinevirtual

These methods get the flags on the specified subobjects.

Retrieves the flags from the specified vertex

Parameters

[in]	in_vertexIndex	The vertex to retrieve the flags from - between 0 and EpMeshGetNumVertices - 1
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EPMeshGetEdgeFlags()

virtual int EPMeshGetEdgeFlags ( const int  in_edgeIndex, INode *  in_pNode = NULL  )

inlinevirtual

Retrieves the flags from the specified edge.

Parameters

[in]	in_edgeIndex	The edge to retrieve the flags from - between 0 and EpMeshGetNumEdges - 1
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EPMeshGetFaceFlags()

virtual int EPMeshGetFaceFlags ( const int  in_faceIndex, INode *  in_pNode = NULL  )

inlinevirtual

Retrieves the flags from the specified face.

Parameters

[in]	in_faceIndex	The face to retrieve the flags from - between 0 and EpMeshGetNumFaces - 1
[in]	in_pNode	Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return 0; }

EPMeshGetVertsUsingEdge()

virtual void EPMeshGetVertsUsingEdge ( BitArray &  out_vset, const BitArray &  in_eset, INode *  in_pNode = NULL  )

inlinevirtual

These methods retrieve all subobjects of the specified type that are connected to the second list of subobjects passed in .

Retrieves list of verts that are used by the edges specified

Parameters

[out]	out_vset	- List of vertices that will be updated with the vertices used by the edges
[in]	in_eset	- List of edges used for finding the vertices
[in]	in_pNode	- Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return; }

EPMeshGetEdgesUsingVert()

virtual void EPMeshGetEdgesUsingVert ( BitArray &  out_eset, BitArray &  in_vset, INode *  in_pNode = NULL  )

inlinevirtual

Retrieves list of edges that are used by the vertices specified.

Parameters

[out]	out_eset	- List of edges that will be updated with the edges used by the vertices
[in]	in_vset	- List of vertices used for finding the edges
[in]	in_pNode	- Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return; }

EPMeshGetFacesUsingEdge()

virtual void EPMeshGetFacesUsingEdge ( BitArray &  out_fset, BitArray &  in_eset, INode *  in_pNode = NULL  )

inlinevirtual

Retrieves list of faces that are used by the edges specified.

Parameters

[out]	out_fset	- List of faces that will be updated with the faces used by the edges
[in]	in_eset	- List of edges used for finding the faces
[in]	in_pNode	- Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return; }

EPMeshGetElementsUsingFace()

virtual void EPMeshGetElementsUsingFace ( BitArray &  out_eset, BitArray &  in_fset, BitArray &  in_fenceSet, INode *  in_pNode = NULL  )

inlinevirtual

Retrieves list of elements that are used by the faces specified.

Parameters

[out]	out_eset	- List of elements that will be updated with the elements used by the faces
[in]	in_fset	- List of faces used for finding the elements
[in]	in_fenceSet	- List for calculating elements from the face
[in]	in_pNode	- Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return; }

EPMeshGetFacesUsingVert()

virtual void EPMeshGetFacesUsingVert ( BitArray &  out_fset, BitArray &  in_vset, INode *  in_pNode = NULL  )

inlinevirtual

Retrieves list of faces that are used by the vertices specified.

Parameters

[out]	out_fset	- List of faces that will be updated with the faces used by the vertices
[in]	in_vset	- List of vertices used for finding the faces
[in]	in_pNode	- Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return; }

EPMeshGetVertsUsingFace()

virtual void EPMeshGetVertsUsingFace ( BitArray &  out_vset, BitArray &  in_fset, INode *  in_pNode = NULL  )

inlinevirtual

Retrieves list of verts that are used by the faces specified.

Parameters

[out]	out_vset	- List of vertices that will be updated with the vertices used by the faces
[in]	in_fset	- List of faces used for finding the vertices
[in]	in_pNode	- Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return; }

EPMeshSetVert()

virtual void EPMeshSetVert ( const BitArray &  in_vset, const Point3 &  in_point, INode *  in_pNode = NULL  )

inlinevirtual

Moves the specified vertices to the specified point.

Requires a commit for other functions to return the proper data

Parameters

[in]	in_vset	- List of vertices that will be moved
[in]	in_point	- Point in the current coordinate system that the vertices will be moved to
[in]	in_pNode	- Optional node to run the check on. If the node is not specified, we will use the currently selected noe

Remarks

This is based on the mesh after all committed operations, but before the current operation, if any.

{ return; }

SmGrpFloater()

virtual void SmGrpFloater ( )

pure virtual

Brings up the Smooting Group floater dialog. If it is already up it closes it

MatIDFloater()

virtual void MatIDFloater ( )

pure virtual

Brings up the Material ID floater dialog. If it is already up it closes it

MatIDFloaterVisible()

virtual BOOL MatIDFloaterVisible ( )

pure virtual

Returns whether the Material ID floater dialog is up.

SmGrpFloaterVisible()

virtual BOOL SmGrpFloaterVisible ( )

pure virtual

Returns whether the Smooting Group floater dialog is up.

CloseSmGrpFloater()

virtual void CloseSmGrpFloater ( )

inlinevirtual

Closes the Smoothing Group Floater Dialog.

{}

CloseMatIDFloater()

virtual void CloseMatIDFloater ( )

inlinevirtual

{}

MatIDFloaterHWND()

virtual HWND MatIDFloaterHWND ( )

inlinevirtual

Returns the Material ID Floater Dialog Handle.

{ return NULL; }

SmGrpFloaterHWND()

virtual HWND SmGrpFloaterHWND ( )

inlinevirtual

Returns the SmGrp Floater Dialog Handle.

{ return NULL; }

ListDeltaOps()

virtual void ListDeltaOps ( )

pure virtual

Prints the delta operations to script window.

EpModGetLast()

virtual int EpModGetLast ( )

inlinevirtual

Returns the last operation used or -1 if none.

Reimplemented in EPolyMod18.

{ return -1; }