Use the options on the Solids > Utilities menu to manipulate the solid models in the Solids window.
Scale all Models — Select this option to display the Scale all Models dialog, where you can scale all imported solid models.
Fill Holes — Select this option to fill the holes selected on the solid model. PartMaker fills the holes by removing the selected faces and then patching up the solid using either a single plane, a surface, or a number of surfaces (in that order of preference).
Measure Models — Select this option to display the Measure Solid Model dialog. You can use this dialog to measure any of the following:
- Distance between two points.
- Angle between three points.
- Length of an edge.
- Radius of the arc formed by three points.
Select All Surfaces — Selects all of the surfaces in the solid model.
Copy Models — Select this option to copy the selected surfaces or solids to the clipboard in a Autodesk-proprietary format that is accessible to Autodesk PowerShape.
Paste as Model — Select this option to paste the selected surfaces or solids from the clipboard (if stored in Autodesk-proprietary format) into the Solids window.