Sequence of programming steps - Milling (PartMaker)

Select ToolMinder > Tools to add tools.
Select ToolMinder > Cycles to add cycles.
Select File > Open Material File to open a material file.
Select Job Optimizer > Defaults to set defaults.
Select View > Setup to specify setup options, such as part boundaries.
Create geometry in CAD mode or select File > Import DXF File to import geometry created using a different CAD package.
Select Part Features > New Hole Group to add a new hole group.
Specify hole locations using one of the following icons:
Single Hole icon

Hole Patterns icon. In PartMaker/Mill, this icon displays a context menu. The Hole Pattern Icon is not displayed if the Hide Hole Patterns Icons option is selected in the Preferences dialog.

Chain Circles icon
Select Part Features > New Profile Group to add a new profile group.
Create profiles using one of the following icons:
Define Profile icon

Chain Geometry icon

Engraving icon
Repeat steps 7 through 10 to create groups of all part features required for the job.
Select Job Optimizer > Post Config File to select a post processor file.
Select Job Optimizer > Generate Process Table to generate a Process Table.
Select Job Optimizer > Generate NC Programto generate an NC program.