Configuring Electrode setup sheets

You can create a setup sheet that shows one or more configured views. An example of this is creating a configured combined setup sheet. The setup sheets are created from template drawings in the electrode_template model in the C:\Users\Public\Documents\Autodesk\Parts folder.

Configuring setup sheets enables you to:

• use additional sheets in electrode_template.
• adjust the setting for each view.
• use the orientation as defined in the view.
• change the relative workplane.
• add balloons, dimensions, or the part itself to an individual view.
• define the size of the font to use for balloons or dimensions.
• specify if the view should be resized if the part is added.
• define individual templates (apart from the GA) to be suppressed or enabled as required.
• specify if the detail sheet should be treated as a configurable sheet or fixed as before.
• use the Edit Drawing dialog to specify the positioning of electrode balloons. By default, automatically positioned electrode balloons do not overlap the view border.

The lock on the Edit View dialog locks the view direction of electrode template drawing. This is to maintain the position of the balloons in relation to the view.

If you have modified the electrode template model you must lock the views in your model to take advantage of this:

1. Open the model.
2. Display the drawings.
3. Lock the views.