Auto-Registration

The automated process for registering scans.

Auto-Registration becomes available once all files have started importing. Simply click the Register Scans button in the lower right corner of the application to begin:

Once initiated, any files yet to be imported complete and then the registration process begins.

Important: Any pre-existing registration information is lost.

Feedback is provided for both import and registration processes, with estimates for completion as well as elapsed time:

If there are multiple groups created using automatic registration, you can use manual registration to manually register the groups together.

Refining the Registration Result

Refining allows you to fix issues with registration. If results are still poor, you may need to attempt the registration again by selecting new points.

If you wish to ignore or delete/permanently exclude a single, problematic scan, or a scan at the top of the vertical group during Manual Registration, you may notice the absence of an X to delete the scan.

You can disband the group, sending the scans into the Unregistered group, where you can then delete the scan(s). You can also start a new group from the scans within the Unregistered group.

Scan groups can be created and used to merge sets of scans together. Groups can be edited and accessed through flyout menus at the top of each scan list.

If your scans have been previously registered, you can either attempt re-register through Auto-Registration, retain data and refine through Manual Registration, or skip registration altogether and go straight to indexing.

This can be done from the Import screen, where the popup appears as you hover over the Register Scans button with a subsequent warning prompt, or, if you chose to manually register and want to back out, go through the scan settings icon at the top right of the screen and hover over the Register Scans button on the next screen. The popup in either instance is the same; click Skip registration.