Modify non-standard sizes

Change a non-standard fastener size you created in Fusion.

1. On the Design workspace toolbar, click Solid > Insert > Insert Fastener .

   The Insert Fastener dialog displays.

2. In the dialog, browse to a fastener family and select the fastener you need.

3. Set the Nominal Size and/or the Nominal Length to the non-standard size you want to modify.

4. At the bottom of the Edit Fastener dialog, click the Modify Fastener button .

5. Change the values of the fastener.

6. Click Save to Hub Library .

7. In the Edit Fastener dialog, click OK.

The fastener updates to use the modified non-standard size.