Topics in this section
- XY plot enhancements
- Examine lock
- Pathlines plot
The Pathlines plot enables you to trace the path that selected fluid particles have taken, so you can gain a deeper understanding of their history. With this plot, you can answer questions such as, which gate the fluid particles entered from, how far they traveled before they froze, or the path they took through a complex geometry. - Fiber breakage results for reactive molding
A range of processes, mesh technologies, and analysis sequences now provide fiber breakage results for thermoset materials. - Weld surface 3D results
A weld surface is the representation, through the thickness of the part, of where flow fronts meet at an angle typically greater than 135o. The weld surface can now be visualized for parts analyzed using 3D technology. - Cavity weight result
The cavity weight result shows you the calculated weight of each individual cavity in a multi-cavity mold. - Viscosity result for all mesh types
The viscosity result shows the viscosity of the polymer at the time the results file was written. This result can be animated, and changes over time. - Bending curvature (Warp) result
The Bending curvature (Warp) result shows the final predicted amount of bending deformation during the warpage of the part. This result applies to Midplane models only. - Injection compression 3D - Frozen check control
Previously, for 3D injection compression models, the compression stroke was stopped if a sufficient number of surface elements were frozen. - Flow front speed result
A new Flow front speed result has been created for
Dual Domain and 
Midplane meshed models, and replaces the existing Flow front speed at center result.