pymel.core.modeling.polySplitEdge¶

polySplitEdge(*args, **kwargs)¶

Split Edges.There are two operations for this command depending on the value of the -operation flag. If -operation is set to 1 then this command will split apart faces along all selected manifold edges. If -operation is set to 0 then this command will split non-manifold edges so as to make them manifold edges. It creates the minimum number of edges that can be created to make the edge manifold. The default value for -operation is 1, operate on manifold edges. Resulting mesh may have extra vertices or edges to ensure geometry is valid.

Flags:

Long Name / Short Name		Argument Types	Properties
caching / cch		bool
	Toggle caching for all attributes so that no recomputation is needed
constructionHistory / ch		bool
	Turn the construction history on or off (where applicable). If construction history is on then the corresponding node will be inserted into the history chain for the mesh. If construction history is off then the operation will be performed directly on the object. Note:If the object already has construction history then this flag is ignored and the node will always be inserted into the history chain.
frozen / fzn		bool
name / n		unicode
	Give a name to the resulting node.
nodeState / nds		int
	Maya dependency nodes have 6 possible states. The Normal (0), HasNoEffect (1), and Blocking (2)states can be used to alter how the graph is evaluated. The Waiting-Normal (3), Waiting-HasNoEffect (4), Waiting-Blocking (5)are for internal use only. They temporarily shut off parts of the graph during interaction (e.g., manipulation). The understanding is that once the operation is done, the state will be reset appropriately, e.g. Waiting-Blockingwill reset back to Blocking. The Normaland Blockingcases apply to all nodes, while HasNoEffectis node specific; many nodes do not support this option. Plug-ins store state in the MPxNode::stateattribute. Anyone can set it or check this attribute. Additional details about each of these 3 states follow. StateDescriptionNormalThe normal node state. This is the default.HasNoEffectThe HasNoEffectoption (a.k.a. pass-through), is used in cases where there is an operation on an input producing an output of the same data type. Nearly all deformers support this state, as do a few other nodes. As stated earlier, it is not supported by all nodes. Its typical to implement support for the HasNoEffectstate in the nodes compute method and to perform appropriate operations. Plug-ins can also support HasNoEffect. The usual implementation of this state is to copy the input directly to the matching output without applying the algorithm in the node. For deformers, applying this state leaves the input geometry undeformed on the output. BlockingThis is implemented in the depend node base class and applies to all nodes. Blockingis applied during the evaluation phase to connections. An evaluation request to a blocked connection will return as failures, causing the destination plug to retain its current value. Dirty propagation is indirectly affected by this state since blocked connections are never cleaned. When a node is set to Blockingthe behavior is supposed to be the same as if all outgoing connections were broken. As long as nobody requests evaluation of the blocked node directly it wont evaluate after that. Note that a blocked node will still respond to getAttrrequests but a getAttron a downstream node will not reevaluate the blocked node. Setting the root transform of a hierarchy to Blockingwont automatically influence child transforms in the hierarchy. To do this, youd need to explicitly set all child nodes to the Blockingstate. For example, to set all child transforms to Blocking, you could use the following script. import maya.cmds as cmds def blockTree(root): nodesToBlock = [] for node in {child:1 for child in cmds.listRelatives( root, path=True, allDescendents=True )}.keys(): nodesToBlock += cmds.listConnections(node, source=True, destination=True ) for node in {source:1 for source in nodesToBlock}.keys(): cmds.setAttr( ‘%s.nodeState’ % node, 2 ) Applying this script would continue to draw objects but things would not be animated. Default:kdnNormal Flag can have multiple arguments, passed either as a tuple or a list.
operation / op		int
	0 means use a Non-Manifold method, 1 means use a Manifold method Common poly modifier operation flags

Derived from mel command maya.cmds.polySplitEdge

Example:

import pymel.core as pm

# An example taking a non-manifold edge and splitting it to
# make it manifold
pm.polyPlane( w=1, h=1, sx=10, sy=10, ax=(0, 1, 0), cuv=1, ch=1 )
pm.scale( 15, 15, 15, r=True )
pm.move( -8, 0, 6, r=True )

pm.select( 'polyPlane1', addFirst=True )
pm.setAttr( 'polyPlane1.subdivisionsWidth', 3 )
pm.setAttr( 'polyPlane1.subdivisionsHeight', 3 )
pm.select( 'pPlane1.e[12]', r=True )
pm.polyExtrudeEdge( 'pPlane1.e[12]', ch=1, kft=0, pvx=-5.5, pvy=0.0, pvz=6.0 )
polyExtrudeEdge1
pm.setAttr( 'polyExtrudeEdge1.localTranslate', 0, 0, 5.093611)
pm.select( 'pPlane1.e[12]', r=True )
pm.polySplitEdge(op=0)
polySplitEdge1

# The edge is now split..
pm.select( 'pPlane1.f[9]', r=True)
pm.move(0, 0.5, 0, r=True)


# An example which splits loops of manifold edges
pm.polyPlane(w=10, h=10, sx=4, sy=4, ch=1, name='ManifoldTest')
pm.select('ManifoldTest.e[3]', 'ManifoldTest.e[12:15]', 'ManifoldTest.e[21]', 'ManifoldTest.e[23]', 'ManifoldTest.e[29]')

pm.polySplitEdge(operation=1)

pm.select('ManifoldTest.f[1:3]', 'ManifoldTest.f[5]', 'ManifoldTest.f[9]')
pm.move(0, 0, 5, r=True)

pm.select('ManifoldTest.f[0]', 'ManifoldTest.f[4]', 'ManifoldTest.f[6:8]', 'ManifoldTest.f[10:15]')
pm.move(0, 0, -5, r=True)