LightscapeLight Class Reference

Common Photometric light. More...

#include <lslights.h>

Inheritance diagram for LightscapeLight:

Classes
class	AreaLightCustAttrib
	Area Lights sampling custom attribute. More...

Public Types
enum	LightTypes {   TYPE_BASE = 532 , TARGET_POINT_TYPE = TYPE_BASE + 0 , POINT_TYPE = TYPE_BASE + 1 , TARGET_LINEAR_TYPE = TYPE_BASE + 2 ,   LINEAR_TYPE = TYPE_BASE + 3 , TARGET_AREA_TYPE = TYPE_BASE + 4 , AREA_TYPE = TYPE_BASE + 5 , TARGET_DISC_TYPE = TYPE_BASE + 6 ,   DISC_TYPE = TYPE_BASE + 7 , TARGET_SPHERE_TYPE = TYPE_BASE + 8 , SPHERE_TYPE = TYPE_BASE + 9 , TARGET_CYLINDER_TYPE = TYPE_BASE + 10 ,   CYLINDER_TYPE = TYPE_BASE + 11 , LAST_TYPE = CYLINDER_TYPE }
	Types for the lights. More...
enum	DistTypes {   ISOTROPIC_DIST = 0 , SPOTLIGHT_DIST = 1 , DIFFUSE_DIST = 2 , WEB_DIST = 3 ,   LAST_DIST = WEB_DIST }
	Types for the distributions. More...
enum	ReferenceIDs {   REF_PARAMS = 0 , REF_SHADOW_PARAMS = 1 , REF_SPOT_PARAMS = 2 , REF_WEB_PARAMS = 3 ,   REF_SHADOWGEN = 4 , REF_EXT_PARAMS = 5 , LAST_REF = REF_EXT_PARAMS }
	IDs for the references kept by this object. More...
enum	ParameterBlockID {   PB_GENERAL = 0 , PB_SHADOW = 1 , PB_SPOT = 2 , PB_WEB = 3 ,   PB_EXT = 4 , LAST_PB = PB_EXT }
	IDs for the parameters blocks for Lightscape lights. More...
enum	ParameterIDs {   PB_DIST_TYPE = 1 , PB_USE_LIGHT = 2 , PB_CAST_SHADOWS = 3 , PB_LIGHT_COLOR = 4 ,   PB_FILTER_COLOR = 5 , PB_INTENSITY = 6 , PB_KELVIN = 8 , PB_USE_KELVIN = 10 ,   PB_INTENSITY_AT = 13 , PB_INTENSITY_TYPE = 14 , PB_FLUX = 15 , PB_ORIGINAL_INTENSITY = 16 ,   PB_ORIGINAL_FLUX = 17 , PB_USE_DIMMER = 18 , PB_DIMMER = 19 , PB_COLORSHIFT_DIMMING = 20 ,   PB_USE_FARATTENUATION = 21 , PB_SHOW_FARATTENUATION_GIZMO = 22 , PB_START_FARATTENUATION = 23 , PB_END_FARATTENUATION = 24 ,   LAST_GEN_PB = PB_END_FARATTENUATION }
	This enum is used to hold the General parameter IDs. More...
enum	ExtParamIDs {   PB_CONTRAST = 0 , PB_DIFFSOFT = 1 , PB_PROJECTOR = 2 , PB_PROJECTOR_MAP = 3 ,   PB_AFFECT_DIFFUSE = 4 , PB_AFFECT_SPECULAR = 5 , PB_AMBIENT_ONLY = 6 , PB_TDIST = 7 ,   PB_LINELIGHT_LENGTH = 11 , PB_AREALIGHT_LENGTH = 11 , PB_AREALIGHT_WIDTH = 12 , PB_DISCLIGHT_RADIUS = 13 ,   PB_SPHERELIGHT_RADIUS_OLD = 14 , PB_SPHERELIGHT_RADIUS = PB_DISCLIGHT_RADIUS , PB_CYLINDERLIGHT_RADIUS_OLD = 15 , PB_CYLINDERLIGHT_RADIUS = PB_DISCLIGHT_RADIUS ,   PB_CYLINDERLIGHT_LENGTH_OLD = 16 , PB_CYLINDERLIGHT_LENGTH = PB_LINELIGHT_LENGTH , LAST_EXT_PB = PB_CYLINDERLIGHT_LENGTH_OLD }
	This enum is used to hold the Extended parameter IDs. More...
enum	ShadowIDs {   PB_ATMOS_SHAD = 0 , PB_ATMOS_OPACITY = 1 , PB_ATMOS_COLAMT = 2 , PB_SHADMULT = 3 ,   PB_SHAD_COLMAP = 4 , PB_SHADCOLOR = 5 , PB_LIGHT_AFFECTS_SHADOW = 6 , PB_USE_GLOBAL_PARAMS = 7 ,   PB_SHAD_PROJ_MAP = 8 , LAST_SHAD_PB = PB_SHAD_PROJ_MAP }
	This enum is used to hold the Shadow parameter IDs. More...
enum	SpotlightIDs { PB_BEAM_ANGLE = 0 , PB_FIELD_ANGLE = 1 , PB_CONE_DISPLAY = 2 , LAST_SPOT_PB = PB_CONE_DISPLAY }
	This enum is used to hold the Spotlight parameter IDs. More...
enum	DistributionIDs {   PB_WEB_FILE_NAME = 0 , PB_WEB_ROTATE_X = 1 , PB_WEB_ROTATE_Y = 2 , PB_WEB_ROTATE_Z = 3 ,   LAST_WEB_PB = PB_WEB_ROTATE_Z }
	This enum is used to hold the Photometric Web parameter IDs. More...
enum	IntensityType { LUMENS = 0 , CANDELAS = 1 , LUX_AT =2 }
	This enum is used to hold the intensity types. More...
enum	MaxShadowType { NO_SHADOW_GENERATOR = -1 , BITMAP_SHADOWS = 0 , RAYTRACE_SHADOWS = 1 , OTHER_SHADOWS = 0xffff }
	Shadow types for MAX. More...
enum	PresetLightColor {   HALOGEN_WARM = 0 , HALOGEN_BASIC , HALOGEN_COOL , INCANDESCENT_FILAMENT_LAMP ,   FLUORESCENT_WARM_WHITE , FLUORESCENT_COOL_WHITE , FLUORESCENT_WHITE , FLUORESCENT_DAYLIGHT ,   FLUORESCENT_LITE_WHITE , HID_CERAMIC_METAL_HALIDE_WARM , HID_CERAMIC_METAL_HALIDE_COOL , HID_QUARTZ_METAL_HALIDE_WARM ,   HID_QUARTZ_METAL_HALIDE , HID_QUARTZ_METAL_HALIDE_COOL , HID_MERCURY , HID_PHOSPHOR_MERCURY ,   HID_XENON , HID_HIGH_PRESSURE_SODIUM , HID_LOW_PRESSURE_SODIUM , D65_ILLUMINANT_REFERENCE_WHITE ,   D50_ILLUMINANT_REFERENCE_WHITE }
	Preset light colors. More...

Public Member Functions
virtual void	SetInclude (BOOL onOff)=0
	Sets whether the Include/Exclude list should include or exclude objects. More...
virtual void	UpdateTargDistance (TimeValue t, INode *inode)=0
	Update the target distance parameter of the light to the distance between the light target and the light. More...
virtual Point3	GetCenter () const =0
	Returns the location of the center of the light. More...
virtual void	SetType (int type)=0
	Sets the light type. More...
virtual void	SetType (const MCHAR *name)=0
	Sets the light type. More...
virtual int	Type ()=0
	Returns the current light type. More...
virtual const MCHAR *	TypeName ()=0
	Returns the light type. More...
virtual void	SetDistribution (DistTypes dist)=0
	Sets the distribution of the light. More...
virtual DistTypes	GetDistribution () const =0
	Returns the distribution of the light. More...
virtual void	SetIntensityAt (float f)=0
	Sets the distance at which the light intensity is measured. More...
virtual float	GetIntensityAt ()=0
	Returns the distance at which the light intensity is measured. More...
virtual void	SetIntensityType (IntensityType t)=0
	Sets the intensity type of the light. More...
virtual IntensityType	GetIntensityType ()=0
	Returns the intensity type of the light. More...
virtual void	SetFlux (TimeValue t, float flux)=0
	Sets the flux of the light. More...
virtual float	GetFlux (TimeValue t, Interval &valid) const =0
	Returns the flux of the light. More...
float	GetFlux (TimeValue t) const
	Returns the flux of the light. More...
virtual void	SetRGBFilter (TimeValue t, Point3 &rgb)=0
	Sets the color of the light filter. More...
virtual Point3	GetRGBFilter (TimeValue t, Interval &valid)=0
	Returns the color of the light filter. More...
Point3	GetRGBFilter (TimeValue t)
	Returns the color of the light filter. More...
virtual void	SetHSVFilter (TimeValue t, Point3 &hsv)=0
	Sets the color of the light filter. More...
virtual Point3	GetHSVFilter (TimeValue t, Interval &valid)=0
	Returns the color of the light filter. More...
Point3	GetHSVFilter (TimeValue t)
	Returns the color of the light filter. More...
virtual ShadowType *	ActiveShadowType ()=0
	Returns the plug-in shadow generator. More...
virtual const MCHAR *	GetShadowGeneratorName ()=0
	Returns the plug-in shadow generator name. More...
virtual void	SetShadowGenerator (ShadowType *s) override=0
	Sets the plug-in shadow generator. More...
virtual void	SetShadowGenerator (const MCHAR *name)=0
	Sets the plug-in shadow generator. More...
virtual BOOL	SetKelvinControl (Control *kelvin)=0
	Sets the controller for the Kelvin temperature. More...
virtual BOOL	SetFilterControl (Control *filter)=0
	Sets the controller for the filter color. More...
virtual Control *	GetKelvinControl ()=0
	Returns the controller for the Kelvin temperature. More...
virtual Control *	GetFilterControl ()=0
	Returns the controller for the filter color. More...
virtual float	GetKelvin (TimeValue t, Interval &v)=0
	Returns the Kelvin temperature of the light. More...
float	GetKelvin (TimeValue t)
	Returns the Kelvin temperature of the light. More...
virtual void	SetKelvin (TimeValue t, float kelvin)=0
	Sets the Kelvin temperature of the light. More...
virtual BOOL	GetUseKelvin ()=0
	Returns whether the kelvin temperature or light color is to be used. More...
virtual void	SetUseKelvin (BOOL useKelvin)=0
	Sets whether the kelvin temperature or light color is to be used. More...
virtual MaxSDK::AssetManagement::AssetUser	GetWebFile () const =0
	Returns the web distribution file for the light as an AssetUser. More...
virtual const MCHAR *	GetFullWebFileName () const =0
	Returns the filename of the web distribution file for the light. More...
virtual void	SetWebFile (const MaxSDK::AssetManagement::AssetUser &file)=0
	Sets the web distribution file for the light. More...
virtual float	GetWebRotateX () const =0
	Returns the rotation along the X axis of the web distribution in the light. More...
virtual void	SetWebRotateX (float degrees)=0
	Sets the rotation along the X axis for the web distribution in the light. More...
virtual float	GetWebRotateY () const =0
	Returns the rotation along the Y axis of the web distribution in the light. More...
virtual void	SetWebRotateY (float degrees)=0
	Sets the rotation along the Y axis for the web distribution in the light. More...
virtual float	GetWebRotateZ () const =0
	Returns the rotation along the Z axis of the web distribution in the light. More...
virtual void	SetWebRotateZ (float degrees)=0
	Sets the rotation along the Z axis for the web distribution in the light. More...
virtual float	GetDimmerValue (TimeValue t, Interval &valid) const =0
	Returns the dimmer value for the light. More...
float	GetDimmerValue (TimeValue t) const
	Returns the dimmer value for the light. More...
virtual void	SetDimmerValue (TimeValue t, float dimmer)=0
	Sets the dimmer value for the light. More...
virtual BOOL	GetUseMultiplier () const =0
	Returns whether the dimmer is used. More...
virtual void	SetUseMultiplier (BOOL on)=0
	Sets whether the dimmer is used. More...
virtual BOOL	IsColorShiftEnabled () const =0
	Returns whether the light's intensity shifts (affects) its color. More...
virtual void	EnableColorShift (BOOL on)=0
	Sets whether the color of the light shifts when its intensity changes Note that this parameter is really activated only if GetUseMultiplier() is true. More...
virtual float	GetResultingIntensity (TimeValue t, Interval &valid) const =0
	Returns the intensity including the dimmer multiplier if it is used. More...
float	GetResultingIntensity (TimeValue t) const
	Returns the intensity including the dimmer multiplier if it is used. More...
virtual float	GetResultingFlux (TimeValue t, Interval &valid) const =0
	Returns the flux including the dimmer multiplier if it is used. More...
float	GetResultingFlux (TimeValue t) const
	Returns the flux including the dimmer multiplier if it is used. More...
virtual float	GetRadius (TimeValue t, Interval &valid) const =0
	Returns the radius of a disc, sphere, cylinder light. More...
float	GetRadius (TimeValue t) const
	Returns the radius of a disc, sphere, cylinder light. More...
virtual void	SetRadius (TimeValue t, float radius)=0
	Sets the radius of a disc, sphere, cylinder light. More...
virtual float	GetLength (TimeValue t, Interval &valid) const =0
	Returns the length of a linear, area, cylinder light. More...
float	GetLength (TimeValue t) const
	Returns the length of a linear, area, cylinder light. More...
virtual void	SetLength (TimeValue t, float length)=0
	Sets the length of a linear, area, cylinder light. More...
virtual float	GetWidth (TimeValue t, Interval &valid) const =0
	Returns the width of an area light. More...
float	GetWidth (TimeValue t) const
	Returns the width of an area light. More...
virtual void	SetWidth (TimeValue t, float width)=0
	Sets the width of an area light. More...
virtual void	SetShape (int count, const Point3 *pointsIn)=0
	Sets the coordinates of the light. More...
virtual int	GetShape (Point3 *pointsOut, int bufSize) const =0
	Returns the coordinates of the light. More...
virtual float	GetOriginalFlux () const =0
	Returns the original flux for a light. More...
virtual void	SetOriginalFlux (float flux)=0
	Sets the original flux for a light. More...
virtual float	GetOriginalIntensity () const =0
	Returns the original intensity for a light. More...
virtual void	SetOriginalIntensity (float candelas)=0
	Sets the original intensity for a light. More...
virtual PresetLightColor	GetColorPreset () const =0
	Returns the color preset of the light. More...
virtual void	SetColorPreset (PresetLightColor presetID)=0
	Sets the preset color of the light to be used. More...
Public Member Functions inherited from GenLight
virtual GenLight *	NewLight (int type)=0
virtual BOOL	IsSpot ()=0
virtual BOOL	IsDir ()=0
virtual void	SetSpotShape (int s)=0
virtual int	GetSpotShape (void)=0
virtual ObjLightDesc *	CreateLightDesc (INode *inode, BOOL forceShadowBuf=FALSE) override=0
	When the renderer goes to render the scene it asks all of the lights to create an ObjectLighDesc object. More...
virtual ObjLightDesc *	CreateLightDesc (RenderGlobalContext *rgc, INode *inode, BOOL forceShadowBuf=FALSE) override
virtual void	SetHSVColor (TimeValue t, Point3 &hsv)=0
virtual Point3	GetHSVColor (TimeValue t, Interval &valid)=0
Point3	GetHSVColor (TimeValue t)
virtual void	SetContrast (TimeValue time, float f)=0
virtual float	GetContrast (TimeValue t, Interval &valid)=0
float	GetContrast (TimeValue t)
virtual void	SetUseAttenNear (int s)=0
virtual BOOL	GetUseAttenNear (void)=0
virtual void	SetAttenNearDisplay (int s)=0
virtual BOOL	GetAttenNearDisplay (void)=0
virtual ShadowType *	GetShadowGenerator ()
virtual void	SetAtmosShadows (TimeValue t, int onOff)
virtual int	GetAtmosShadows (TimeValue t)
virtual void	SetAtmosOpacity (TimeValue t, float f)
virtual float	GetAtmosOpacity (TimeValue t, Interval &valid)
float	GetAtmosOpacity (TimeValue t)
virtual void	SetAtmosColAmt (TimeValue t, float f)
virtual float	GetAtmosColAmt (TimeValue t, Interval &valid)
float	GetAtmosColAmt (TimeValue t)
virtual void	SetUseShadowColorMap (TimeValue t, int onOff)
virtual int	GetUseShadowColorMap (TimeValue t)
virtual ExclList &	GetExclusionList ()=0
virtual void	SetExclusionList (ExclList &list)=0
virtual BOOL	SetHotSpotControl (Control *c)=0
virtual BOOL	SetFalloffControl (Control *c)=0
virtual BOOL	SetColorControl (Control *c)=0
virtual Control *	GetHotSpotControl ()=0
virtual Control *	GetFalloffControl ()=0
virtual Control *	GetColorControl ()=0
virtual void	SetAffectDiffuse (BOOL onOff)
virtual BOOL	GetAffectDiffuse ()
virtual void	SetAffectSpecular (BOOL onOff)
virtual BOOL	GetAffectSpecular ()
virtual void	SetDecayType (BOOL onOff)
virtual BOOL	GetDecayType ()
virtual void	SetDecayRadius (TimeValue time, float f)
virtual float	GetDecayRadius (TimeValue t, Interval &valid)
float	GetDecayRadius (TimeValue t)
virtual void	SetDiffuseSoft (TimeValue time, float f)
virtual float	GetDiffuseSoft (TimeValue t, Interval &valid)
float	GetDiffuseSoft (TimeValue t)
virtual void	SetShadColor (TimeValue t, Point3 &rgb)
virtual Point3	GetShadColor (TimeValue t, Interval &valid)
Point3	GetShadColor (TimeValue t)
virtual BOOL	GetLightAffectsShadow ()
virtual void	SetLightAffectsShadow (BOOL b)
virtual void	SetShadMult (TimeValue t, float m)
virtual float	GetShadMult (TimeValue t, Interval &valid)
float	GetShadMult (TimeValue t)
virtual Texmap *	GetShadowProjMap ()
virtual void	SetShadowProjMap (Texmap *pmap)
virtual void	SetAmbientOnly (BOOL onOff)
virtual BOOL	GetAmbientOnly ()
Public Member Functions inherited from LightObject
SClass_ID	SuperClassID ()
	Retrieves a constant representing the type of the plugin. More...
int	IsRenderable ()
	Indicates whether the object may be rendered. More...
virtual void	InitNodeName (MSTR &s) override
	This is the default name of the node when it is created. More...
virtual CoreExport void *	GetInterface (ULONG id) override
	Inherited from Animatable. More...
virtual CoreExport BaseInterface *	GetInterface (Interface_ID id) override
	Inherited from Animatable. More...
virtual RefResult	EvalLightState (TimeValue time, Interval &valid, LightState *ls)=0
	This method is called to update the passed LightState and validity interval of the light. More...
RefResult	EvalLightState (TimeValue time, LightState *ls)
virtual void	SetUseLight (int onOff)=0
	Sets if the light is on or off. More...
virtual BOOL	GetUseLight (void)=0
	Returns TRUE if the light is on; otherwise FALSE. More...
virtual void	SetHotspot (TimeValue time, float f)=0
	Sets the hotspot to the specified angle at the specified time. More...
virtual float	GetHotspot (TimeValue t, Interval &valid)=0
	Retrieves the hotspot angle. More...
float	GetHotspot (TimeValue t)
	Retrieves the hotspot angle. More...
virtual void	SetFallsize (TimeValue time, float f)=0
	Sets the falloff setting of the light. More...
virtual float	GetFallsize (TimeValue t, Interval &valid)=0
	Returns the falloff angle of the light in degrees. More...
float	GetFallsize (TimeValue t)
	Returns the falloff angle of the light in degrees. More...
virtual void	SetAtten (TimeValue time, int which, float f)=0
	Sets the specified attenuation range distance at the time passed. More...
virtual float	GetAtten (TimeValue t, int which, Interval &valid)=0
	Returns the specified attenuation range distance at the time passed. More...
float	GetAtten (TimeValue t, int which)
	Returns the specified attenuation range distance at the time passed. More...
virtual void	SetTDist (TimeValue time, float f)=0
	Sets the light's target distance. More...
virtual float	GetTDist (TimeValue t, Interval &valid)=0
	Retrieves the light's target distance. More...
float	GetTDist (TimeValue t)
	Retrieves the light's target distance. More...
virtual void	SetConeDisplay (int s, int notify=TRUE)=0
	Sets the light's cone display flag. More...
virtual BOOL	GetConeDisplay (void)=0
	Retrieves the light's cone display setting. More...
virtual int	GetShadowMethod ()
	Returns the type of shadows used by the light. More...
virtual void	SetRGBColor (TimeValue t, const Point3 &rgb)
	Sets the color of the light at the specified time. More...
virtual Point3	GetRGBColor (TimeValue t, Interval &valid)
	Returns the color of the light at the specified time and updates the validity interval to reflect this parameters validity interval. More...
Point3	GetRGBColor (TimeValue t)
	Returns the color of the light at the specified time. More...
virtual void	SetIntensity (TimeValue time, float f)
	Sets the intensity of the light to the value passed. More...
virtual float	GetIntensity (TimeValue t, Interval &valid)
	Retrieves the intensity of the light at the specified time and updates the validity interval passed to reflect the validity interval of this parameter. More...
float	GetIntensity (TimeValue t)
	Retrieves the intensity of the light at the specified time. More...
virtual void	SetAspect (TimeValue t, float f)
	Sets the aspect ratio of the light at the specified time. More...
virtual float	GetAspect (TimeValue t, Interval &valid)
	Retrieves the aspect ratio of the light at the specified time and updates the validity interval passed to reflect the validity interval of this parameter. More...
float	GetAspect (TimeValue t)
	Retrieves the aspect ratio of the light at the specified time. More...
virtual void	SetUseAtten (int s)
	Sets the flag to indicate if the light is attenuated. More...
virtual BOOL	GetUseAtten (void)
	Returns TRUE to indicate the light is attenuated; otherwise FALSE. More...
virtual void	SetAttenDisplay (int s)
	Sets the flag to indicate if the light attenuation ranges are displayed. More...
virtual BOOL	GetAttenDisplay (void)
	Returns TRUE if the light attenuation ranges are displayed; otherwise FALSE. More...
virtual void	Enable (int enab)
	Sets the light to enabled or disables (on or off). More...
virtual void	SetMapBias (TimeValue t, float f)
	Sets the map bias setting at the time passed. More...
virtual float	GetMapBias (TimeValue t, Interval &valid)
	Returns the map bias setting at the time passed and updates the validity interval to reflect the validity interval of this parameter. More...
float	GetMapBias (TimeValue t)
	Returns the map bias setting at the time passed. More...
virtual void	SetMapRange (TimeValue t, float f)
	Sets the map sample range setting to the value passed at the time passed. More...
virtual float	GetMapRange (TimeValue t, Interval &valid)
	Retrieves the lights map sample range setting at the specified time and updates the validity interval to reflect the validity interval of this parameter. More...
float	GetMapRange (TimeValue t)
	Retrieves the lights map sample range setting at the specified time. More...
virtual void	SetMapSize (TimeValue t, int f)
	Sets the lights map size parameter to the value passed at the time passed. More...
virtual int	GetMapSize (TimeValue t, Interval &valid)
	Returns the lights map size parameter at the specified time and updates the validity interval passed to reflect the validity interval of this parameter. More...
int	GetMapSize (TimeValue t)
	Returns the lights map size parameter at the specified time. More...
virtual void	SetRayBias (TimeValue t, float f)
	Sets the raytrace bias setting to the value passed at the specified time. More...
virtual float	GetRayBias (TimeValue t, Interval &valid)
	Returns the lights raytrace bias setting at the specified time and updates the validity interval passed to reflect the validity interval of this parameter. More...
float	GetRayBias (TimeValue t)
	Returns the lights raytrace bias setting at the specified time. More...
virtual int	GetUseGlobal ()
	Returns the Use Global Settings flag setting. More...
virtual void	SetUseGlobal (int a)
	Sets the lights Use Global Settings flag. More...
virtual int	GetShadow ()
	Returns the lights Cast Shadows flag. More...
virtual void	SetShadow (int a)
	Sets the lights Cast Shadows flag. More...
virtual int	GetShadowType ()
	Retrieves the type of shadows used by the light - mapped or raytraced. More...
virtual void	SetShadowType (int a)
	Sets the type of shadows used by the light - mapped or raytraced. More...
virtual int	GetAbsMapBias ()
	Returns the lights Absolute Map Bias setting. More...
virtual void	SetAbsMapBias (int a)
	Sets the lights Absolute Map Bias setting. More...
virtual int	GetOvershoot ()
	Returns the lights Overshoot on / off setting. More...
virtual void	SetOvershoot (int a)
	Sets the lights Overshoot on / off setting. More...
virtual int	GetProjector ()
	Returns the lights Projector on / off setting. More...
virtual void	SetProjector (int a)
	Sets the lights projector on / off setting. More...
virtual ExclList *	GetExclList ()
	Returns the list of names of items included or excluded by this light. More...
virtual BOOL	Include ()
	Returns TRUE if the light's name list is of items to be included by the light. More...
virtual Texmap *	GetProjMap ()
	Returns the map used by a projector light. More...
virtual void	SetProjMap (Texmap *pmap)
	Sets the image(s) used by the projector light. More...
Public Member Functions inherited from Object
CoreExport	Object ()
CoreExport	~Object ()
virtual BOOL	CheckObjectIntegrity ()
	This method is used for debugging only. More...
virtual BOOL	HasUVW () override
	Call this method to find out if the object has UVW coordinates. More...
virtual BOOL	HasUVW (int mapChannel) override
	Call this method to find out if the object is has UVW coordinates for the specified mapping channel. More...
virtual Object *	FindBaseObject ()
	It is called to return a pointer to the base object (an object that is not a derived object). More...
virtual BOOL	IsParamSurface ()
	There are several methods used to access a parametric position on the surface of the object. More...
virtual int	NumSurfaces (TimeValue t)
	Returns the number of parametric surfaces within the object. More...
virtual Point3	GetSurfacePoint (TimeValue t, float u, float v, Interval &iv)
	This method needs to be implemented if Object::IsParamSurface() returns TRUE. More...
virtual Point3	GetSurfacePoint (TimeValue t, int surface, float u, float v, Interval &iv)
	This method is used to retrieve a point on the specified surface of the object based on two parameters of the surface, u and v. More...
virtual void	SurfaceClosed (TimeValue t, int surface, BOOL &uClosed, BOOL &vClosed)
	This method allows the object to return flags that indicate whether the parametric surface is closed in the U and V dimensions. More...
virtual BOOL	GetExtendedProperties (TimeValue t, MSTR &prop1Label, MSTR &prop1Data, MSTR &prop2Label, MSTR &prop2Data)
	This method allows an object to return extended Properties fields. More...
CoreExport SvGraphNodeReference	SvTraverseAnimGraph (IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
CoreExport bool	SvHandleDoubleClick (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport MSTR	SvGetName (IGraphObjectManager *gom, IGraphNode *gNode, bool isBeingEdited)
CoreExport COLORREF	SvHighlightColor (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport bool	SvIsSelected (IGraphObjectManager *gom, IGraphNode *gNode)
	Returns true if the object is selected in its schematic view. More...
CoreExport MultiSelectCallback *	SvGetMultiSelectCallback (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport bool	SvCanSelect (IGraphObjectManager *gom, IGraphNode *gNode)
CoreExport void	AddXTCObject (XTCObject *pObj, int priority=0, int branchID=-1)
	This method adds an extension object into the pipeline. More...
CoreExport int	NumXTCObjects ()
	Returns the number of extension objects maintained by this Object. More...
CoreExport XTCObject *	GetXTCObject (int index)
	Returns a pointer to the specified extension object. More...
CoreExport void	RemoveXTCObject (int index)
	Removes the extension object as indicated by the index. More...
CoreExport void	SetXTCObjectPriority (int index, int priority)
	Sets the priority for the extension object whose index is passed. More...
CoreExport int	GetXTCObjectPriority (int index)
	Returns the integer priority number of the extension object whose index is passed. More...
CoreExport void	SetXTCObjectBranchID (int index, int branchID)
	Sets the branch ID of the extension object whose index is passed. More...
CoreExport int	GetXTCObjectBranchID (int index)
	Returns the integer branch ID of the extension object whose index is passed. More...
CoreExport void	MergeAdditionalChannels (Object *from, int branchID)
	This method has to be called whenever the CompoundObject updates a branch (calling Eval() on it). More...
CoreExport void	BranchDeleted (int branchID, bool reorderChannels)
	This method has to be called on the CompoundObject so it can delete the XTCObjects for the specified branch. More...
CoreExport void	CopyAdditionalChannels (Object *from, bool deleteOld=true, bool bShallowCopy=false)
	This method copies all extension objects from the "from" object into the current object. More...
CoreExport void	DeleteAllAdditionalChannels ()
	Implemented by the System. More...
virtual BOOL	UseSelectionBrackets ()
	This method allows an object to choose whether or not it will display selection brackets in shaded viewports. More...
virtual BOOL	IsManipulator ()
virtual void	ReduceDisplayCaches ()
	Should reduce any derived display data to save memory, since the node wont be drawn until the user undhides it. More...
virtual bool	NeedGWCacheRebuilt (GraphicsWindow *gw, Material *ma, int numMat)
	This returns whether the Graphics Cache for this object needs to be rebuilt. More...
virtual void	BuildGWCache (GraphicsWindow *gw, Material *ma, int numMat, BOOL threaded)
	This builds the graphics window cached mesh. More...
virtual void	StartStackEval ()
	This are called right before and after a modifier is applied to an object. More...
virtual void	EndStackEval ()
virtual int	UsesWireColor ()
	This method determines if the object color is used for display. More...
virtual int	DoOwnSelectHilite ()
	If an object wants to draw itself in the 3D viewports in its selected state in some custom manner this method should return nonzero. More...
virtual int	IntersectRay (TimeValue t, Ray &r, float &at, Point3 &norm)
	This method is called to compute the intersection point and surface normal at this intersection point of the ray passed and the object. More...
virtual BOOL	NormalAlignVector (TimeValue t, Point3 &pt, Point3 &norm)
	Objects that don't support the IntersectRay() method (such as helper objects) can implement this method to provide a default vector for use with the normal align command in 3ds Max. More...
void	LockObject ()
	Implemented by the System. More...
void	UnlockObject ()
	Implemented by the System. More...
int	IsObjectLocked ()
	Implemented by the System. More...
virtual ObjectState	Eval (TimeValue t)=0
	This method is called to evaluate the object and return the result as an ObjectState. More...
void	LockChannels (ChannelMask channels)
	Implemented by the System. More...
void	UnlockChannels (ChannelMask channels)
	Implemented by the System. More...
ChannelMask	GetChannelLocks ()
	Implemented by the System. More...
void	SetChannelLocks (ChannelMask channels)
	Implemented by the System. More...
ChannelMask	GetChannelLocks (ChannelMask m)
	Implemented by the System. More...
virtual BOOL	CanCacheObject ()
	This method determines if this object can have channels cached. More...
virtual void	WSStateInvalidate ()
	This is called by a node when the node's world space state has become invalid. More...
virtual BOOL	IsWorldSpaceObject ()
	Returns TRUE if the object as a world space object; otherwise FALSE. More...
CoreExport INode *	GetWorldSpaceObjectNode ()
	Implemented by the System. More...
virtual BOOL	IsParticleSystem ()
	Implemented by the System. More...
CoreExport void	CopyChannelLocks (Object *obj, ChannelMask needChannels)
	Implemented by the System. More...
virtual void	TopologyChanged ()
	Implemented by the System. More...
virtual int	IsDeformable ()
	Indicates whether this object is deformable. More...
virtual int	NumPoints ()
	The points of a deformable object are accessed through a virtual array interface. More...
virtual Point3	GetPoint (int i)
	The points of a deformable object are accessed through a virtual array interface. More...
virtual void	SetPoint (int i, const Point3 &p)
	The points of a deformable object are accessed through a virtual array interface. More...
virtual BOOL	IsPointSelected (int i)
	Returns TRUE if the 'i-th' point is selected; otherwise FALSE. More...
virtual float	PointSelection (int i)
	Returns a floating point weighted point selection if the object supports it. More...
virtual BOOL	HasWeights ()
	Returns TRUE if the object has weights for its points that can be set; otherwise FALSE. More...
virtual double	GetWeight (int i)
	Returns the weight of the specified point of the object. More...
virtual void	SetWeight (int i, const double w)
	Sets the weight of the specified point. More...
virtual BOOL	PolygonCount (TimeValue t, int &numFaces, int &numVerts)
	Retreives the number of faces and vertices of the polyginal mesh representation of this object. More...
virtual void	PointsWereChanged ()
	Informs the object that its points have been deformed, so it can invalidate its cache. More...
virtual CoreExport void	Deform (Deformer *defProc, int useSel=0)
	This is the method used to deform the object with a deformer. More...
virtual CoreExport void	GetDeformBBox (TimeValue t, Box3 &box, Matrix3 *tm=NULL, BOOL useSel=FALSE)
	This method computes the bounding box in the objects local coordinates or the optional space defined by tm. More...
virtual int	IsMappable ()
	This method lets you know if the ApplyUVWMap() method is available for this object. More...
virtual int	NumMapChannels ()
	Returns the maximum number of channels supported by this type of object. More...
virtual int	NumMapsUsed ()
	Returns the number of maps currently used by this object. More...
virtual void	ApplyUVWMap (int type, float utile, float vtile, float wtile, int uflip, int vflip, int wflip, int cap, const Matrix3 &tm, int channel=1)
	This method may be called to map the object with UVW mapping coordinates. More...
virtual CoreExport int	CanConvertToType (Class_ID obtype)
	Indicates whether the object can be converted to the specified type. More...
virtual CoreExport Object *	ConvertToType (TimeValue t, Class_ID obtype)
	This method converts this object to the type specified and returns a pointer it. More...
virtual Class_ID	PreferredCollapseType ()
	This method allows objects to specify the class that is the best class to convert to when the user collapses the stack. More...
virtual CoreExport void	GetCollapseTypes (Tab< Class_ID > &clist, Tab< MSTR * > &nlist)
	When the user clicks on the Edit Stack button in the modify branch a list of 'Convert To:' types is presented. More...
virtual Object *	CollapseObject ()
	This method is called on the world space cache object when the stack gets collapsed, that lets the pipeline object decide, if it wants to return a different object than itself. More...
virtual DWORD	GetSubselState ()
	For objects that have sub selection levels, this method returns the current selection level of the object. More...
virtual void	SetSubSelState (DWORD s)
	Implemented by the System. More...
CoreExport void	ReadyChannelsForMod (ChannelMask channels)
	Implemented by the System. More...
virtual CoreExport Interval	ChannelValidity (TimeValue t, int nchan)
	Retrieve the current validity interval for the nchan channel of the object. More...
virtual CoreExport void	SetChannelValidity (int nchan, Interval v)
	Sets the validity interval of the specified channel. More...
virtual CoreExport void	InvalidateChannels (ChannelMask channels)
	This method invalidates the intervals for the given channel mask. More...
virtual CoreExport Interval	ObjectValidity (TimeValue t)
	This method returns the validity interval of the object as a whole at the specified time. More...
virtual Object *	MakeShallowCopy (ChannelMask channels)
	This method must make a copy of its "shell" and then shallow copy (see below) only the specified channels. More...
virtual CoreExport void	ShallowCopy (Object *fromOb, ChannelMask channels)
	This method copies the specified channels from the fromOb to this and copies the validity intervals. More...
virtual CoreExport void	FreeChannels (ChannelMask channels)
	This method deletes the memory associated with the specified channels and set the intervals associated with the channels to invalid (empty). More...
virtual CoreExport void	NewAndCopyChannels (ChannelMask channels)
	This method replaces the locked channels with newly allocated copies. More...
virtual CoreExport void	MaybeEnlargeViewportRect (GraphicsWindow *gw, Rect &rect)
	This method allows the object to enlarge its viewport rectangle, if it wants to. More...
CoreExport bool	IsBaseClassOwnedChannel (int nchan)
	Implemented by the System. More...
CoreExport void	UpdateValidity (int nchan, Interval v)
	When a modifier is applied to an object, it needs to include its own validity interval in the interval of the object. More...
Interval	GetNoEvalInterval ()
void	SetNoEvalInterval (Interval iv)
virtual CoreExport void	ReduceCaches (TimeValue t)
	This method give the object the chance to reduce its caches. More...
virtual int	IsConstObject ()
	This is called to determine if this is a construction object or not. More...
virtual int	NumPipeBranches (bool selected=true)
	This method returns the number of pipeline branches combined by the object. More...
virtual Object *	GetPipeBranch (int i, bool selected=true)
	Retrieves sub-object branches from an object that supports branching. More...
virtual INode *	GetBranchINode (TimeValue t, INode *node, int i, bool selected=true)
	When an object has sub-object branches, it is likely that the sub-objects are transformed relative to the object. More...
virtual int	NumberOfContainedShapes ()
	Returns the number of shapes contained inside this object. More...
virtual ShapeObject *	GetContainedShape (TimeValue t, int index)
	This method returns the ShapeObject specified by the index passed at the time specified. More...
virtual void	GetContainedShapeMatrix (TimeValue t, int index, Matrix3 &mat)
	Returns the matrix associated with the shape whose index is passed. More...
virtual BitArray	ContainedShapeSelectionArray ()
	This is used by the lofter. More...
virtual BOOL	IsShapeObject ()
	Returns the number of shapes contained inside this object. More...
Public Member Functions inherited from BaseObject
virtual CoreExport unsigned long	GetObjectDisplayRequirement () const
virtual CoreExport bool	PrepareDisplay (const MaxSDK::Graphics::UpdateDisplayContext &prepareDisplayContext)
virtual CoreExport bool	UpdatePerNodeItems (const MaxSDK::Graphics::UpdateDisplayContext &updateDisplayContext, MaxSDK::Graphics::UpdateNodeContext &nodeContext, MaxSDK::Graphics::IRenderItemContainer &targetRenderItemContainer)
virtual CoreExport bool	UpdatePerViewItems (const MaxSDK::Graphics::UpdateDisplayContext &updateDisplayContext, MaxSDK::Graphics::UpdateNodeContext &nodeContext, MaxSDK::Graphics::UpdateViewContext &viewContext, MaxSDK::Graphics::IRenderItemContainer &targetRenderItemContainer)
virtual CoreExport const MaxSDK::Graphics::RenderItemHandleArray &	GetRenderItems () const
CoreExport	BaseObject ()
virtual CoreExport	~BaseObject ()
virtual BOOL	HasViewDependentBoundingBox ()
	This method return true if GetWorldBoundBox returns different boxes for different viewports. More...
virtual int	HitTest (TimeValue t, INode *inode, int type, int crossing, int flags, IPoint2 *p, ViewExp *vpt)
	This method is called to determine if the specified screen point intersects the item. More...
virtual void	SetExtendedDisplay (int flags)
	This method is used for storing mode-dependent display attributes. More...
virtual int	Display (TimeValue t, INode *inode, ViewExp *vpt, int flags)
	This is called by the system to have the item display itself (perform a quick render in viewport, using the current TM). More...
virtual void	Snap (TimeValue t, INode *inode, SnapInfo *snap, IPoint2 *p, ViewExp *vpt)
	Checks the point passed for a snap and updates the SnapInfo structure. More...
virtual void	GetWorldBoundBox (TimeValue t, INode *inode, ViewExp *vp, Box3 &box)
	This method returns the world space bounding box for Objects (see below for the Sub-object gizmo or Modifiers gizmo version). More...
virtual void	GetLocalBoundBox (TimeValue t, INode *inode, ViewExp *vp, Box3 &box)
	This is the object space bounding box, the box in the object's local coordinates. More...
virtual CreateMouseCallBack *	GetCreateMouseCallBack ()=0
	This method allows the system to retrieve a callback object used in creating an object in the 3D viewports. More...
virtual const MCHAR *	GetObjectName () MAX_SEALED
virtual const MCHAR *	GetObjectName (bool localized) const
virtual CoreExport BOOL	OKToChangeTopology (MSTR &modName)
	Implemented by the System. More...
virtual BOOL	ChangeTopology ()
	This method asks the question of an object or modifier "Do you change topology"? An object or modifier returns TRUE if it is capable of changing topology when its parameters are being edited; otherwise FALSE. More...
virtual void	ForceNotify (Interval &i)
	Notifies dependents of a change. More...
virtual IParamArray *	GetParamBlock ()
	An object or modifier should implement this method if it wishes to make its parameter block available for other plug-ins to access it. More...
virtual IParamBlock2 *	GetParamBlock (int i) override
	An object or modifier should implement this method if it wishes to make its parameter block available for other plug-ins to access it. More...
virtual int	GetParamBlockIndex (int id)
	If a plug-in makes its parameter block available (using GetParamBlock()) then it will need to provide #defines for indices into the parameter block. More...
virtual void	Move (TimeValue t, Matrix3 &partm, Matrix3 &tmAxis, Point3 &val, BOOL localOrigin=FALSE)
	When this method is called the plug-in should respond by moving its selected sub-object components. More...
virtual void	Rotate (TimeValue t, Matrix3 &partm, Matrix3 &tmAxis, Quat &val, BOOL localOrigin=FALSE)
	When this method is called the plug-in should respond by rotating its selected sub-object components. More...
virtual void	Scale (TimeValue t, Matrix3 &partm, Matrix3 &tmAxis, Point3 &val, BOOL localOrigin=FALSE)
	When this method is called the plug-in should respond by scaling its selected sub-object components. More...
virtual void	TransformStart (TimeValue t)
	This method is called before the first Move(), Rotate() or Scale() call and before a hold is in effect. More...
virtual void	TransformHoldingStart (TimeValue t)
	This method is called before the first Move(), Rotate() or Scale() call and after a hold is in effect. More...
virtual void	TransformHoldingFinish (TimeValue t)
	This method is called after the user has completed the Move(), Rotate() or Scale() operation and before the undo object has been accepted. More...
virtual void	TransformFinish (TimeValue t)
	This method is called after the user has completed the Move(), Rotate() or Scale() operation and the undo object has been accepted. More...
virtual void	TransformCancel (TimeValue t)
	This method is called when the transform operation is canceled by a right-click and the undo has been canceled. More...
virtual int	HitTest (TimeValue t, INode *inode, int type, int crossing, int flags, IPoint2 *p, ViewExp *vpt, ModContext *mc)
	This method is used in modifier gizmo hit testing. More...
virtual int	Display (TimeValue t, INode *inode, ViewExp *vpt, int flags, ModContext *mc)
	When this method is called the plug-in should respond by performing a quick render of the modifier gizmo in viewport using the current TM. More...
virtual void	GetWorldBoundBox (TimeValue t, INode *inode, ViewExp *vpt, Box3 &box, ModContext *mc)
	This method computes the world space bounding box of the modifier gizmo (or any object that when in sub-object mode has a gizmo). More...
virtual void	CloneSelSubComponents (TimeValue t)
	This method is called to make a copy of the selected sub-object components of the item. More...
virtual void	AcceptCloneSelSubComponents (TimeValue t)
	This method is called when the user mouses up after shift-cloning a sub-object selection. More...
virtual void	SelectSubComponent (HitRecord *hitRec, BOOL selected, BOOL all, BOOL invert=FALSE)
	This method is called to change the selection state of the component identified by hitRec. More...
virtual void	ClearSelection (int selLevel)
	This method is called to clear the selection for the given sub-object level. More...
virtual void	SelectAll (int selLevel)
	This method is called to select every element of the given sub-object level. More...
virtual void	InvertSelection (int selLevel)
	This method is called to invert the specified sub-object level. More...
virtual int	SubObjectIndex (HitRecord *hitRec)
	Returns the index of the sub-object element identified by the HitRecord hitRec. More...
virtual void	ActivateSubobjSel (int level, XFormModes &modes)
	When the user changes the selection of the sub-object drop down, this method is called to notify the plug-in. More...
virtual BOOL	SupportsNamedSubSels ()
	An object that supports sub-object selection can choose to support named sub object selection sets. More...
virtual void	ActivateSubSelSet (MSTR &setName)
	When the user chooses a name from the drop down list this method is called. More...
virtual void	NewSetFromCurSel (MSTR &setName)
	If the user types a new name into the named selection set drop down then this method is called. More...
virtual void	RemoveSubSelSet (MSTR &setName)
	If the user selects a set from the drop down and then chooses Remove Named Selections from the Edit menu this method is called. More...
virtual void	SetupNamedSelDropDown ()
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
virtual int	NumNamedSelSets ()
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
virtual MSTR	GetNamedSelSetName (int i)
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
virtual void	SetNamedSelSetName (int i, MSTR &newName)
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
virtual void	NewSetByOperator (MSTR &newName, Tab< int > &sets, int op)
	To support the Edit Named Selections dialog, plug-ins must implement this method. More...
virtual void	GetSubObjectCenters (SubObjAxisCallback *cb, TimeValue t, INode *node, ModContext *mc)
	When the user is in a sub-object selection level, the system needs to get the reference coordinate system definition from the current modifier being edited so that it can display the axis. More...
virtual void	GetSubObjectTMs (SubObjAxisCallback *cb, TimeValue t, INode *node, ModContext *mc)
	When the user is in a sub-object selection level, the system needs to get the reference coordinate system definition from the current modifier being edited so that it can display the axis. More...
virtual void	NotifyPreCollapse (INode *node, IDerivedObject *derObj, int index)
	This method is called before a modifier or object is collapsed. More...
virtual void	NotifyPostCollapse (INode *node, Object *obj, IDerivedObject *derObj, int index)
	This method is called after a modifier or object is collapsed. More...
virtual int	NumSubObjTypes ()
	Objects and modifiers that support subobjects have to overwrite this method - as well as GetSubObjType() - and return a class derived from ISubObjType in GetSubObjType(). More...
virtual ISubObjType *	GetSubObjType (int i)
	Returns a pointer to the sub-object type for the sub-object whose index is passed. More...
virtual CoreExport int	GetSubObjectLevel ()
	This method returns an integer which indicates the current sub-object level of the modifier or base object. More...
virtual void	SetGenUVW (BOOL sw)
	This method is called to change the state of its Generate UVW boolean. More...
virtual void	SetGenUVW (int mapChannel, BOOL sw)
	This method is called to change the state of its Generate UVW boolean for the specified mapping channel. More...
virtual void	ShowEndResultChanged (BOOL showEndResult)
	This method notifies the BaseObject that the end result display has been switched (the "Show End Result" button has been toggled). More...
Public Member Functions inherited from ReferenceTarget
virtual CoreExport void	GetClassName (MSTR &s, bool localized=true) const override
	Retrieves the name of the plugin class. More...
virtual BOOL	IsRefTarget ()
	Checks if this is a ReferenceTarget. More...
CoreExport RefResult	TestForLoop (const Interval &refInterval, RefMakerHandle hmaker)
	Tests for a cyclical reference. More...
CoreExport BOOL	HasDependents ()
	Checks if a ReferenceTarget has references. More...
CoreExport BOOL	HasRealDependents ()
	Checks if this has Real (Strong) Dependents. More...
void	BeginDependencyTest ()
	Starts Dependency Test. More...
BOOL	EndDependencyTest ()
	Ends Dependency Test. More...
virtual void	RefAdded (RefMakerHandle rm)
	Called after a reference is made to a target. More...
virtual void	RefAddedUndoRedo (RefMakerHandle rm)
	Called after a reference is made to a target because of undo or redo. More...
virtual void	RefDeleted ()
	Called after a references to this is deleted. More...
virtual void	RefDeletedUndoRedo ()
	Called after a references to this is deleted because of undo or redo. More...
CoreExport RefResult	DeleteAllRefsToMe ()
	Deletes all references to this ReferenceTarget. More...
CoreExport RefResult	TransferReferences (RefTargetHandle oldTarget, BOOL delOld=FALSE)
	Transfers all the references from oldTarget to this. More...
CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...
virtual CoreExport RefTargetHandle	Clone (RemapDir &remap)
	This method is used by 3ds Max to clone an object. More...
virtual CoreExport void	BaseClone (ReferenceTarget *from, ReferenceTarget *to, RemapDir &remap)
	This method copies base class data from an object to its clone. More...
virtual CoreExport RefResult	NotifyDependents (const Interval &changeInt, PartID partID, RefMessage message, SClass_ID sclass=NOTIFY_ALL, BOOL propagate=TRUE, RefTargetHandle hTarg=NULL, NotifyDependentsOption notifyDependentsOption=REFNOTIFY_ALLOW_OPTIMIZATIONS)
	Notify all dependent RefMakers concerned with the message. More...
void	FlagDependents (TimeValue t, PartID which=PART_PUT_IN_FG)
	This sends the REFMSG_FLAGDEPENDENTS message up the pipeline. More...
virtual void	NotifyForeground (TimeValue t)
	This method is called to flag dependents into the FG. More...
virtual void	NotifyTarget (int message, ReferenceMaker *hMaker)
	Sends messages to ReferenceTargets. More...
CoreExport	ReferenceTarget ()
	Constructor. More...
virtual CoreExport RefResult	AutoDelete ()
	Deletes the object when it has no more real dependents. More...
CoreExport RefResult	MaybeAutoDelete ()
	Deletes the object when it has no more real dependents. More...
Public Member Functions inherited from ReferenceMaker
CoreExport RefResult	ReplaceReference (int which, RefTargetHandle newtarg, BOOL delOld=TRUE)
	Used when cloning reference makers. More...
CoreExport RefResult	DeleteAllRefsFromMe ()
	Deletes all references from this ReferenceMaker. More...
CoreExport RefResult	DeleteAllRefs ()
	Deletes all references both to and from this item. More...
CoreExport RefResult	DeleteReference (int i)
	Deletes the specified reference. More...
virtual BOOL	CanTransferReference (int i)
	Tells whether this reference can be transfered. More...
CoreExport ReferenceSaveManager &	GetReferenceSaveManager ()
	Access the ReferenceSaveManager of this ReferenceMaker. More...
virtual CoreExport IOResult	Save (ISave *isave)
	Called for saving data. More...
virtual CoreExport IOResult	Load (ILoad *iload)
	Called for loading data. More...
virtual int	RemapRefOnLoad (int iref)
	Used to load old files with references. More...
virtual CoreExport void	RescaleWorldUnits (float f)
	Rescale size of all world units in reference hierarchy. More...
virtual CoreExport void	EnumAuxFiles (AssetEnumCallback &assetEnum, DWORD flags)
	Enumerate auxiliary files (e.g. bitmaps) More...
virtual CoreExport void	SaveEnum (SaveEnumProc &sep, BOOL isNodeCall=0)
	The default save enumeration. More...
virtual CoreExport bool	SpecifySaveReferences (ReferenceSaveManager &referenceSaveManager)
	Used to specify reference slot remapping during scene file save. More...
CoreExport int	DoEnumDependents (DependentEnumProc *dep)
	Begins an enumeration that searches back in the dependency network. More...
CoreExport bool	EnumRefHierarchy (RefEnumProc &proc, bool includeCustAttribs=true, bool includeIndirectRefs=true, bool includeNonPersistentRefs=true, bool preventDuplicatesViaFlag=true)
	This method provides a general purpose reference enumerator. More...
CoreExport int	FindRef (RefTargetHandle rtarg)
	Get the index of the ReferenceTarget. More...
virtual BOOL	IsRefMaker ()
	Tells whether it is a ReferenceMaker. More...
virtual BOOL	IsRealDependency (ReferenceTarget *rtarg)
	Returns whether this is a "real" (strong) dependency or not. More...
virtual BOOL	ShouldPersistWeakRef (RefTargetHandle rtarg)
	Specifies whether a weak reference is to be persisted on a partial load or save. More...
CoreExport	ReferenceMaker ()
	Constructor. More...
CoreExport void	DeleteMe ()
	Deletes an instance of this class. More...
virtual CoreExport int	NumRefs ()
	Returns the total number of references this ReferenceMaker can hold. More...
virtual CoreExport RefTargetHandle	GetReference (int i)
	Returns the 'i-th' reference. More...
Public Member Functions inherited from Animatable
virtual void	FreeCaches ()
virtual int	NumChildren ()
virtual Animatable *	ChildAnim (int i)
virtual CoreExport MSTR	NodeName ()
virtual void	EditTrack ()
virtual CoreExport BOOL	SubAnimSetKeyBufferPresent (int subNum)
	returns true if the sub-anim has a "Set Key" buffer present More...
virtual BOOL	SetKeyBufferPresent ()
	returns true if there is a "Set Key" buffer present More...
virtual CoreExport void	SubAnimCommitSetKeyBuffer (TimeValue t, int subNum)
	Commit any "Set Key" buffers on the given sub-anim. More...
virtual void	CommitSetKeyBuffer (TimeValue t)
	Commit any "Set Key" buffers. More...
virtual CoreExport void	SubAnimRevertSetKeyBuffer (int subNum)
	Revert any "Set Key" buffers on the given sub-anim. More...
virtual void	RevertSetKeyBuffer ()
	Revert any "Set Key" buffers. More...
virtual LRESULT CALLBACK	TrackViewWinProc (HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam)
	This function is obsolete. More...
virtual bool	IsParamBlockDesc2Used (ParamBlockDesc2 *desc)
	Returns true if the passed description is being used. More...
virtual bool	GetMacroRecorderName (bool used_as_rhs_value, MSTR &objectSpecifiedName)
	This method is called to access the object specified name to use for the Maxscript macrorecorder. More...
CoreExport	Animatable ()
	Constructor. More...
virtual CoreExport void	DeleteThis ()
	Deletes an instance of this class. More...
virtual void	GetClassName (MSTR &s) MAX_SEALED
MSTR	ClassName (bool localized=true) const
	Returns the name of the plugin class. More...
virtual CoreExport Class_ID	ClassID ()
	Retrieves a constant that uniquely identifies the plugin class. More...
virtual void	BeginEditParams (IObjParam *ip, ULONG flags, Animatable *prev=NULL)
virtual void	EndEditParams (IObjParam *ip, ULONG flags, Animatable *next=NULL)
virtual CoreExport void	ReleaseInterface (ULONG id, void *i)
virtual CoreExport int	SetProperty (ULONG id, void *data)
virtual CoreExport void *	GetProperty (ULONG id)
CoreExport void	AppendProperty (AnimProperty *prop)
	A function to directly add arbitrary properties to this object developers should ensure that the properties ID does not conflict with any Max-specific IDs. More...
CoreExport AnimProperty *	FindProperty (DWORD id)
	Find any property. More...
CoreExport void	AddAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid, DWORD len, void *data)
	Adds application/plugin specific (custom) data to an Animatable. More...
CoreExport AppDataChunk *	GetAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Retrieves the application/plugin specific (custom) data stored with an Animatable. More...
CoreExport BOOL	RemoveAppDataChunk (const Class_ID &cid, SClass_ID sid, DWORD sbid)
	Deletes the application/plugin specific (custom) data stored with an Animatable. More...
CoreExport void	ClearAllAppData ()
	Deletes all application/plugin specific (custom) data stored with an Animatable. More...
virtual int	NumSubs ()
virtual Animatable *	SubAnim (int i)
virtual MSTR	SubAnimName (int i) MAX_SEALED
virtual CoreExport MSTR	SubAnimName (int i, bool localized)
virtual BOOL	CanDeleteSubAnim (int i)
virtual void	DeleteSubAnim (int i)
virtual DWORD	GetSubAnimCurveColor (int subNum)
virtual int	SubNumToRefNum (int subNum)
virtual BOOL	CanCopyAnim ()
CoreExport int	HasSubElements (int type=0)
virtual int	GetSubFCurveExtents (int subNum, ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	The values max and min should be initialized before calling this function. More...
virtual ParamDimension *	GetParamDimension (int i)
virtual BOOL	SelectSubAnim (int subNum)
virtual BOOL	BypassTreeView ()
virtual BOOL	BypassTrackBar ()
virtual BOOL	BypassPropertyLevel ()
virtual BOOL	InvisibleProperty ()
virtual int	NumKeys ()
virtual TimeValue	GetKeyTime (int index)
virtual int	GetKeyIndex (TimeValue t)
virtual BOOL	GetNextKeyTime (TimeValue t, DWORD flags, TimeValue &nt)
virtual void	CopyKeysFromTime (TimeValue src, TimeValue dst, DWORD flags)
virtual void	DeleteKeyAtTime (TimeValue t)
virtual BOOL	IsKeyAtTime (TimeValue t, DWORD flags)
virtual int	GetKeyTimes (Tab< TimeValue > &times, Interval range, DWORD flags)
virtual int	GetKeySelState (BitArray &sel, Interval range, DWORD flags)
CoreExport void	OpenTreeEntry (int type, DWORD tv)
CoreExport void	CloseTreeEntry (int type, DWORD tv)
CoreExport int	IsTreeEntryOpen (int type, DWORD tv)
CoreExport BOOL	GetSelInTrackView (DWORD tv)
CoreExport void	SetSelInTrackView (DWORD tv, BOOL sel)
CoreExport BOOL	InTrackViewSelSet (int which)
CoreExport void	SetTrackViewSelSet (int which, BOOL inOut)
virtual BOOL	AssignController (Animatable *control, int subAnim)
virtual BOOL	CanAssignController (int subAnim)
	Return true if we can reassign the subanim specified. More...
virtual BOOL	CanMakeUnique ()
CoreExport int	EnumAnimTree (AnimEnum *animEnum, Animatable *client, int subNum)
virtual int	RenderBegin (TimeValue t, ULONG flags=0)
virtual int	RenderEnd (TimeValue t)
virtual CoreExport Interval	GetTimeRange (DWORD flags)
virtual void	EditTimeRange (Interval range, DWORD flags)
virtual void	DeleteTime (Interval iv, DWORD flags)
virtual void	ReverseTime (Interval iv, DWORD flags)
virtual void	ScaleTime (Interval iv, float s)
virtual void	InsertTime (TimeValue ins, TimeValue amount)
virtual BOOL	SupportTimeOperations ()
virtual CoreExport void	MapKeys (TimeMap *map, DWORD flags)
virtual void	DeleteKeys (DWORD flags)
virtual void	DeleteKeyByIndex (int index)
virtual void	SelectKeys (TrackHitTab &sel, DWORD flags)
virtual void	SelectSubKeys (int subNum, TrackHitTab &sel, DWORD flags)
virtual void	SelectSubCurve (int subNum, BOOL sel)
virtual void	SelectKeyByIndex (int i, BOOL sel)
virtual BOOL	IsKeySelected (int i)
virtual void	FlagKey (TrackHitRecord hit)
virtual int	GetFlagKeyIndex ()
virtual int	NumSelKeys ()
virtual void	CloneSelectedKeys (BOOL offset=FALSE)
virtual void	AddNewKey (TimeValue t, DWORD flags)
virtual void	MoveKeys (ParamDimensionBase *dim, float delta, DWORD flags)
virtual void	ScaleKeyValues (ParamDimensionBase *dim, float origin, float scale, DWORD flags)
virtual void	SelectCurve (BOOL sel)
virtual BOOL	IsCurveSelected ()
	Returns TRUE if the function curve is selected; otherwise returns FALSE. More...
virtual BOOL	IsSubCurveSelected (int subNum)
	Returns the selected state of the sub-curve whose index is passed. More...
virtual int	GetSelKeyCoords (TimeValue &t, float &val, DWORD flags)
virtual void	SetSelKeyCoords (TimeValue t, float val, DWORD flags)
virtual int	SetSelKeyCoordsExpr (ParamDimension *dim, const MCHAR *timeExpr, const MCHAR *valExpr, DWORD flags)
virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, int dx, int dy, DWORD flags)
virtual void	AdjustTangents (TrackHitRecord hit, ParamDimensionBase *dim, float angle, float length, DWORD flags)
virtual CoreExport BOOL	IsAnimated ()
virtual BOOL	CanCopyTrack (Interval iv, DWORD flags)
virtual BOOL	CanPasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)
virtual TrackClipObject *	CopyTrack (Interval iv, DWORD flags)
virtual void	PasteTrack (TrackClipObject *cobj, Interval iv, DWORD flags)
virtual BOOL	CanCopySubTrack (int subNum, Interval iv, DWORD flags)
virtual BOOL	CanPasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)
virtual TrackClipObject *	CopySubTrack (int subNum, Interval iv, DWORD flags)
virtual void	PasteSubTrack (int subNum, TrackClipObject *cobj, Interval iv, DWORD flags)
virtual int	GetTrackVSpace (int lineHeight)
virtual int	HitTestTrack (TrackHitTab &hits, Rect &rcHit, Rect &rcTrack, float zoom, int scroll, DWORD flags)
virtual int	PaintTrack (ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)
virtual int	PaintSubTrack (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcTrack, Rect &rcPaint, float zoom, int scroll, DWORD flags)
virtual int	PaintFCurves (ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	HitTestFCurves (ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	PaintSubFCurves (int subNum, ParamDimensionBase *dim, HDC hdc, Rect &rcGraph, Rect &rcPaint, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual int	HitTestSubFCurves (int subNum, ParamDimensionBase *dim, TrackHitTab &hits, Rect &rcHit, Rect &rcGraph, float tzoom, int tscroll, float vzoom, int vscroll, DWORD flags)
virtual void	EditTrackParams (TimeValue t, ParamDimensionBase *dim, const MCHAR *pname, HWND hParent, IObjParam *ip, DWORD flags)
virtual int	TrackParamsType ()
virtual int	GetFCurveExtents (ParamDimensionBase *dim, float &min, float &max, DWORD flags)
	This method is called to calculate the largest and smallest values of the anim. More...
CoreExport void	AddNoteTrack (NoteTrack *note)
CoreExport void	DeleteNoteTrack (NoteTrack *note, BOOL delNote=TRUE)
CoreExport BOOL	HasNoteTracks ()
CoreExport int	NumNoteTracks ()
CoreExport NoteTrack *	GetNoteTrack (int i)
virtual void	FreeAllBitmaps ()
virtual void	GetSystemNodes (INodeTab &nodes, SysNodeContext Context)
virtual BOOL	IsSubClassOf (Class_ID classID)
	returns true if the animatable has sub-classed off the given class More...
virtual CoreExport void	MouseCycleCompleted (TimeValue t)
virtual CoreExport void	MouseCycleStarted (TimeValue t)
virtual int	NumParamBlocks ()
virtual IParamBlock2 *	GetParamBlockByID (short id)
CoreExport bool	SvSaveData (ISave *isave, USHORT id)
CoreExport bool	SvLoadData (ILoad *iLoad)
CoreExport DWORD	SvGetRefIndex ()
CoreExport void	SvSetRefIndex (DWORD i)
CoreExport bool	SvDeleteRefIndex ()
CoreExport SvGraphNodeReference	SvStdTraverseAnimGraph (IGraphObjectManager *gom, Animatable *owner, int id, DWORD flags)
virtual CoreExport bool	SvCanInitiateLink (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvCanConcludeLink (IGraphObjectManager *gom, IGraphNode *gNode, IGraphNode *gNodeChild)
virtual CoreExport bool	SvCanSetName (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvSetName (IGraphObjectManager *gom, IGraphNode *gNode, const MSTR &name)
virtual CoreExport bool	SvCanRemoveThis (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvRemoveThis (IGraphObjectManager *gom, IGraphNode *gNode)
	Called when the user deletes this object in the schematic view... More...
virtual CoreExport bool	SvIsHighlighted (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport COLORREF	SvGetSwatchColor (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvIsInactive (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvLinkChild (IGraphObjectManager *gom, IGraphNode *gNodeThis, IGraphNode *gNodeChild)
virtual CoreExport bool	SvEditProperties (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetTip (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetRefTip (IGraphObjectManager *gom, IGraphNode *gNode, IGraphNode *gNodeMaker)
virtual CoreExport bool	SvCanDetach (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport bool	SvDetach (IGraphObjectManager *gom, IGraphNode *gNode)
virtual CoreExport MSTR	SvGetRelTip (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns a string to be displayed in the tip window in the schematic view for a relationship from "gNodeMaker" to "gNodeTarget"... More...
virtual CoreExport bool	SvCanDetachRel (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Returns true if this object can respond to the SvDetachRel(...) method... More...
virtual CoreExport bool	SvDetachRel (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Detach this relationship. More...
virtual CoreExport bool	SvHandleRelDoubleClick (IGraphObjectManager *gom, IGraphNode *gNodeTarget, int id, IGraphNode *gNodeMaker)
	Called when this relationship is double-clicked in the schematic view... More...
CoreExport ICustAttribContainer *	GetCustAttribContainer ()
	This method returns a pointer to the custom attributes container interface class. More...
CoreExport void	AllocCustAttribContainer ()
	This method allocates space for a custom attributes container. More...
CoreExport void	DeleteCustAttribContainer ()
	This method deletes space used by a custom attributes container. More...
void	SetAFlag (DWORD mask)
void	ClearAFlag (DWORD mask)
	Clears one or more bits in the Animatable flags. More...
bool	TestAFlag (DWORD mask) const
	Tests one or more bits in the Animatable flags. More...
void	SetAFlagEx (DWORD mask)
	Sets one or more bits in the Animatable extended flags. More...
void	ClearAFlagEx (DWORD mask)
	Clears one or more bits in the Animatable extended flags. More...
bool	TestAFlagEx (DWORD mask) const
	Tests one or more bits in the Animatable extended flags. More...
CoreExport bool	TestFlagBit (int index)
	Tests the specified flag bit. More...
CoreExport void	SetFlagBit (int index, bool newValue=true)
	Sets the specified flag bit. More...
CoreExport void	ClearFlagBit (int index)
	Clears the specified flag bit. More...
Public Member Functions inherited from InterfaceServer
virtual UtilExport	~InterfaceServer ()
	Destructor. More...
template<class InterfaceType >
InterfaceType *	GetTypedInterface ()

Static Public Member Functions
static AreaLightCustAttrib *	GetAreaLightCustAttrib (CustAttrib *attrib)
	Returns the AreaLightCustAttrib interface for a custom attribute. More...
Static Public Member Functions inherited from Animatable
static CoreExport BOOL	IsDeleted (Animatable *anim)
	Debug method to determine whether an object has been deleted. More...
static CoreExport AnimHandle	GetHandleByAnim (Animatable *anim)
	Get the unique handle for an Animatable object. More...
static CoreExport Animatable *	GetAnimByHandle (AnimHandle handle)
	Get an Animatable object from its unique handle. More...
static CoreExport AnimHandle	GetNextHandle ()
	Get the unique handle for the next Animatable object to be created. More...
static CoreExport void	EnumerateAllAnimatables (EnumAnimList &enumProcObject)
	Enumerator to enumerate across all animatables. More...
static CoreExport bool	RegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	UnRegisterAppDataLoadCallback (const Class_ID &cid, SClass_ID sid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	RegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Registers a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport bool	UnRegisterAppDataLoadCallback (DWORD sbid, APPDATALOADPROC proc)
	Unregisters a callback proc that is called when an AppDataChunk is read from a scene file. More...
static CoreExport int	RequestFlagBit ()
	Requests an unique flag bit index. More...
static CoreExport void	ReleaseFlagBit (int index)
	Releases the flag bit index. More...
static CoreExport void	ClearFlagBitInAllAnimatables (int index)
	Clears the specified flag bit in all Animatables. More...
Static Public Member Functions inherited from MaxHeapOperators
static UtilExport void *	operator new (size_t size)
	Standard new operator used to allocate objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e)
	Standard new operator used to allocate objects if there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate objects that takes the type of memory, filename and line number where the new was called If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate objects that takes the filename and line number where the new was called If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new (size_t size, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate objects that takes extra flags to specify special operations If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, int block_type, const char *filename, int line)
	New operator used to allocate arrays of objects. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, const char *filename, int line)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void *	operator new[] (size_t size, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, an exception will be thrown. More...
static UtilExport void *	operator new[] (size_t size, const std::nothrow_t &e, unsigned long flags)
	New operator used to allocate arrays of objects If there is insufficient memory, NULL will be returned. More...
static UtilExport void	operator delete (void *ptr)
	Standard delete operator used to deallocate an object If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an object If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an object that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an object that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete (void *ptr, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an object that takes extra flags to specify special operations If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e)
	Standard delete operator used to deallocate an array of objects If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, int block_type, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the type of memory, filename and line number where the delete was called If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, const char *filename, int line)
	Delete operator used to deallocate an array of objects that takes the filename and line number where the delete was called If the pointer is invalid, nothing will happen. More...
static UtilExport void	operator delete[] (void *ptr, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void	operator delete[] (void *ptr, const std::nothrow_t &e, unsigned long flags)
	Delete operator used to deallocate an array of objects that takes extra flags to specify special operations If the pointer is invalid, an exception will be thrown. More...
static UtilExport void *	operator new (size_t size, void *placement_ptr)
	Placement new operator. More...
static UtilExport void	operator delete (void *ptr, void *placement_ptr)
	Placement delete operator. More...
static UtilExport void *	aligned_malloc (size_t size, size_t alignment)
	Allocates memory on a specified alignment boundary. More...
static UtilExport void *	aligned_realloc (void *ptr, size_t size, size_t alignment)
	Reallocates memory on a specified alignment boundary. More...
static UtilExport void	aligned_free (void *ptr)
	Frees a block of memory that was allocated with aligned_malloc/aligned_realloc. More...

Additional Inherited Members
Static Public Attributes inherited from Animatable
static const AnimHandle	kInvalidAnimHandle = 0
Protected Member Functions inherited from ReferenceTarget
virtual CoreExport int	DoEnumDependentsImpl (DependentEnumProc *dep)
	Method to perform an enumeration on a ReferenceTarget. More...
virtual CoreExport	~ReferenceTarget ()=0
	Destructor. More...
Protected Member Functions inherited from ReferenceMaker
virtual RefResult	NotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID &partID, RefMessage message, BOOL propagate)=0
	Receives and responds to messages. More...
virtual CoreExport	~ReferenceMaker ()=0
	Destructor. More...
virtual CoreExport void	SetReference (int i, RefTargetHandle rtarg)
	Stores a ReferenceTarget as its 'i-th' reference`. More...
void	BlockEval ()
	Validates a given reference link between this reference maker and its reference target. More...
void	UnblockEval ()
	Validates a given reference link between this reference maker and its reference target. More...
int	Evaluating ()
	Validates a given reference link between this reference maker and its reference target. More...
CoreExport RefResult	StdNotifyRefChanged (const Interval &changeInt, RefTargetHandle hTarget, PartID partID, RefMessage message, BOOL propagate, NotifyDependentsOption notifyDependentsOption)
	Validates a given reference link between this reference maker and its reference target. More...
Protected Member Functions inherited from Animatable
virtual CoreExport	~Animatable ()=0
	Destructor. More...
Protected Member Functions inherited from Noncopyable
	Noncopyable ()
	~Noncopyable ()
Protected Attributes inherited from BaseObject
MaxSDK::Graphics::RenderItemHandleArray	mRenderItemHandles
Protected Attributes inherited from Animatable
DWORD	aflag
AnimPropertyList	aprops

Detailed Description

Common Photometric light.

LightscapeLight is the base class for all Photometric lights. You can safely cast an Animatble* to LightscapeLight* if IsSubClass(LIGHTSCAPE_LIGHT_CLASS) returns true.

Member Enumeration Documentation

LightTypes

enum LightTypes

Types for the lights.

These values are used in SetType and returned by Type.

Enumerator
TYPE_BASE
TARGET_POINT_TYPE	Target point light type.
POINT_TYPE	Free point light type.
TARGET_LINEAR_TYPE	Target linear light type.
LINEAR_TYPE	Free linear light type.
TARGET_AREA_TYPE	Target area light type.
AREA_TYPE	Free area light type.
TARGET_DISC_TYPE	Target disc light type.
DISC_TYPE	Free disc light type.
TARGET_SPHERE_TYPE	Target sphere light type.
SPHERE_TYPE	Free sphere light type.
TARGET_CYLINDER_TYPE	Target cylinder light type.
CYLINDER_TYPE	Free cylinder light type.
LAST_TYPE	Last valid type.

                    {
      TYPE_BASE                  = 532,
      TARGET_POINT_TYPE          = TYPE_BASE + 0,  
      POINT_TYPE                 = TYPE_BASE + 1,  
      TARGET_LINEAR_TYPE         = TYPE_BASE + 2,  
      LINEAR_TYPE                = TYPE_BASE + 3,  
      TARGET_AREA_TYPE           = TYPE_BASE + 4,  
      AREA_TYPE                  = TYPE_BASE + 5,  
      TARGET_DISC_TYPE           = TYPE_BASE + 6,  
      DISC_TYPE                  = TYPE_BASE + 7,  
      TARGET_SPHERE_TYPE         = TYPE_BASE + 8,  
      SPHERE_TYPE                = TYPE_BASE + 9,  
      TARGET_CYLINDER_TYPE       = TYPE_BASE + 10, 
      CYLINDER_TYPE              = TYPE_BASE + 11, 
      LAST_TYPE                  = CYLINDER_TYPE   
    };

DistTypes

enum DistTypes

Types for the distributions.

These values are used in SetDistribution and returned by GetDistribution.

Enumerator
ISOTROPIC_DIST	Isotropic distribution type.
SPOTLIGHT_DIST	Spolight distribution type.
DIFFUSE_DIST	Diffuse distribution type.
WEB_DIST	Web distribution type.
LAST_DIST	Last valid distribution type.

                   {
      ISOTROPIC_DIST             = 0,           
      SPOTLIGHT_DIST             = 1,           
      DIFFUSE_DIST               = 2,           
      WEB_DIST                   = 3,           
      LAST_DIST                  = WEB_DIST     
    };

ReferenceIDs

enum ReferenceIDs

IDs for the references kept by this object.

Enumerator
REF_PARAMS	Reference to the common parameters.
REF_SHADOW_PARAMS	Reference to the shadow parameters.
REF_SPOT_PARAMS	Reference to the spotlight distribution parameters.
REF_WEB_PARAMS	Reference to the web distribution parameters.
REF_SHADOWGEN	Reference to the shadow generator.
REF_EXT_PARAMS	Reference to the extended parameters.
LAST_REF	The last reference ID.

                      {
      REF_PARAMS                 = 0,
      REF_SHADOW_PARAMS          = 1,
      REF_SPOT_PARAMS            = 2,
      REF_WEB_PARAMS             = 3,
      REF_SHADOWGEN              = 4,
      REF_EXT_PARAMS             = 5,
      LAST_REF                   = REF_EXT_PARAMS
    };

ParameterBlockID

enum ParameterBlockID

IDs for the parameters blocks for Lightscape lights.

Enumerator
PB_GENERAL	Parameter block ID for the common parameters.
PB_SHADOW	Parameter block ID for the shadow parameters.
PB_SPOT	Parameter block ID for the spotlight distribution parameters.
PB_WEB	Parameter block ID for the web distribution parameters.
PB_EXT	Parameter block ID for the extended parameters.
LAST_PB	Last parameter block ID.

                          {
      PB_GENERAL                 = 0,
      PB_SHADOW                  = 1,
      PB_SPOT                    = 2,
      PB_WEB                     = 3,
      PB_EXT                     = 4,
      LAST_PB                    = PB_EXT
    };

ParameterIDs

enum ParameterIDs

This enum is used to hold the General parameter IDs.

Enumerator
PB_DIST_TYPE	The light distribution type.
PB_USE_LIGHT	Use the light.
PB_CAST_SHADOWS	Cast shadows.
PB_LIGHT_COLOR	Light Color.
PB_FILTER_COLOR	Filter Color.
PB_INTENSITY	Intensity.
PB_KELVIN	Light color in degrees kelvin.
PB_USE_KELVIN	Flag to use Kelvin or RGB.
PB_INTENSITY_AT	Intensity At.
PB_INTENSITY_TYPE	Intensity Type.
PB_FLUX	Flux.
PB_ORIGINAL_INTENSITY	Original Intensity.
PB_ORIGINAL_FLUX	Original Flux.
PB_USE_DIMMER	use the dimmer slider/spinner
PB_DIMMER	Dimmer/Multiplier.
PB_COLORSHIFT_DIMMING	Lamp color shift on dimming.
PB_USE_FARATTENUATION	use the far attenuation
PB_SHOW_FARATTENUATION_GIZMO	display the far attenuation when unselected
PB_START_FARATTENUATION	start far attenuation value
PB_END_FARATTENUATION	end far attenuation value
LAST_GEN_PB	Last id in list.

                      {
      PB_DIST_TYPE               = 1,
      PB_USE_LIGHT               = 2,
      PB_CAST_SHADOWS            = 3,
      PB_LIGHT_COLOR             = 4,
      PB_FILTER_COLOR            = 5,
      PB_INTENSITY               = 6,
      PB_KELVIN                  = 8,
      PB_USE_KELVIN              = 10,
      PB_INTENSITY_AT            = 13,
      PB_INTENSITY_TYPE          = 14,
      PB_FLUX                    = 15,
      PB_ORIGINAL_INTENSITY      = 16,
      PB_ORIGINAL_FLUX           = 17,
      PB_USE_DIMMER               = 18,
      PB_DIMMER                       = 19,
      PB_COLORSHIFT_DIMMING       = 20,
      PB_USE_FARATTENUATION       = 21,
      PB_SHOW_FARATTENUATION_GIZMO = 22,
      PB_START_FARATTENUATION     = 23,
      PB_END_FARATTENUATION      = 24,
      LAST_GEN_PB                = PB_END_FARATTENUATION
    };

ExtParamIDs

enum ExtParamIDs

This enum is used to hold the Extended parameter IDs.

Enumerator
PB_CONTRAST	Contrast between diffuse and ambient.
PB_DIFFSOFT	Softening between diffuse and ambient.
PB_PROJECTOR	Use projector map.
PB_PROJECTOR_MAP	The projector map.
PB_AFFECT_DIFFUSE	Affect diffuse channel.
PB_AFFECT_SPECULAR	Affect specular channel.
PB_AMBIENT_ONLY	Ambient only.
PB_TDIST	Target distance.
PB_LINELIGHT_LENGTH	Line Light length.
PB_AREALIGHT_LENGTH	Area Light length (Rectangle)
PB_AREALIGHT_WIDTH	Area light height (Rectangle)
PB_DISCLIGHT_RADIUS	Disc light radius.
PB_SPHERELIGHT_RADIUS_OLD	Sphere light radius.
PB_SPHERELIGHT_RADIUS
PB_CYLINDERLIGHT_RADIUS_OLD	Cylinder light radius.
PB_CYLINDERLIGHT_RADIUS
PB_CYLINDERLIGHT_LENGTH_OLD	Cylinder light length.
PB_CYLINDERLIGHT_LENGTH
LAST_EXT_PB	Last id in list.

                     {
      PB_CONTRAST                = 0,
      PB_DIFFSOFT                = 1,
      PB_PROJECTOR               = 2,
      PB_PROJECTOR_MAP           = 3,
      PB_AFFECT_DIFFUSE          = 4,
      PB_AFFECT_SPECULAR         = 5,
      PB_AMBIENT_ONLY            = 6,
      PB_TDIST                   = 7,
//      PB_LENGTH                       = 8,
//      PB_WIDTH                            = 9,  
//      PB_GARBAGE                      = 10,
//      WARNING:  DO NOT REDEFINE ABOVE IDs.  THIS MAY CAUSE A CRASH WHEN LOADING OLD
//                   FILES
//    Change made August 27, 2001 David Cunningham
//    for B24 of VIZ R4
        PB_LINELIGHT_LENGTH             = 11,
        PB_AREALIGHT_LENGTH             = 11,
        PB_AREALIGHT_WIDTH              = 12, 
        PB_DISCLIGHT_RADIUS             = 13,
        PB_SPHERELIGHT_RADIUS_OLD       = 14, // obsolete, use PB_SPHERELIGHT_RADIUS instead
        PB_SPHERELIGHT_RADIUS           = PB_DISCLIGHT_RADIUS,
        PB_CYLINDERLIGHT_RADIUS_OLD     = 15, // obsolete, use PB_CYLINDERLIGHT_RADIUS instead
        PB_CYLINDERLIGHT_RADIUS         = PB_DISCLIGHT_RADIUS,
        PB_CYLINDERLIGHT_LENGTH_OLD     = 16, // obsolete, use PB_CYLINDERLIGHT_LENGTH instead
        PB_CYLINDERLIGHT_LENGTH         = PB_LINELIGHT_LENGTH,
      LAST_EXT_PB                = PB_CYLINDERLIGHT_LENGTH_OLD
    };

ShadowIDs

enum ShadowIDs

This enum is used to hold the Shadow parameter IDs.

Enumerator
PB_ATMOS_SHAD	Atmospheric shadows.
PB_ATMOS_OPACITY	Atmosphere opacity.
PB_ATMOS_COLAMT	Atmosphere color influence.
PB_SHADMULT	Shadow Density.
PB_SHAD_COLMAP	Shadow Color Map Enabled.
PB_SHADCOLOR	Shadow color.
PB_LIGHT_AFFECTS_SHADOW	Light affects shadow color.
PB_USE_GLOBAL_PARAMS	Use global shadow generator.
PB_SHAD_PROJ_MAP	Shadow Projection map.
LAST_SHAD_PB	Last shadow id.

                   {
      PB_ATMOS_SHAD              = 0,
      PB_ATMOS_OPACITY           = 1,
      PB_ATMOS_COLAMT            = 2,
      PB_SHADMULT                = 3,
      PB_SHAD_COLMAP             = 4,
      PB_SHADCOLOR               = 5,
      PB_LIGHT_AFFECTS_SHADOW    = 6,
      PB_USE_GLOBAL_PARAMS       = 7,
      PB_SHAD_PROJ_MAP           = 8,
      LAST_SHAD_PB               = PB_SHAD_PROJ_MAP
    };

SpotlightIDs

enum SpotlightIDs

This enum is used to hold the Spotlight parameter IDs.

Enumerator
PB_BEAM_ANGLE	Beam angle.
PB_FIELD_ANGLE	Field angle.
PB_CONE_DISPLAY	Display the spot light cone.
LAST_SPOT_PB	Last spotlight distribution id.

                      {
      PB_BEAM_ANGLE              = 0,
      PB_FIELD_ANGLE             = 1,
      PB_CONE_DISPLAY            = 2,
      LAST_SPOT_PB               = PB_CONE_DISPLAY
    };

DistributionIDs

enum DistributionIDs

This enum is used to hold the Photometric Web parameter IDs.

Enumerator
PB_WEB_FILE_NAME	The name of the webfile.
PB_WEB_ROTATE_X	Rotate X.
PB_WEB_ROTATE_Y	Rotate Y.
PB_WEB_ROTATE_Z	Rotate Z.
LAST_WEB_PB	Last web distribution id.

                         {
      PB_WEB_FILE_NAME           = 0,
      PB_WEB_ROTATE_X            = 1,
      PB_WEB_ROTATE_Y            = 2,
      PB_WEB_ROTATE_Z            = 3,
      LAST_WEB_PB               = PB_WEB_ROTATE_Z
    };

IntensityType

enum IntensityType

This enum is used to hold the intensity types.

These are valid values for the Intensity Type parameter.

Enumerator
LUMENS	Intensity is in lumens.
CANDELAS	Intensity is in candelas.
LUX_AT	Intensity is in Lux at distance.

                       {
      LUMENS                     = 0,
      CANDELAS                   = 1,
      LUX_AT                     =2,
    };

MaxShadowType

enum MaxShadowType

Shadow types for MAX.

Enumerator
NO_SHADOW_GENERATOR	No Shadow Generator.
BITMAP_SHADOWS	Bitmap Shadows.
RAYTRACE_SHADOWS	RayTraceShadows.
OTHER_SHADOWS	Other shadow generator.

                       {
      NO_SHADOW_GENERATOR        = -1,
      BITMAP_SHADOWS             = 0,
      RAYTRACE_SHADOWS           = 1,
      OTHER_SHADOWS              = 0xffff
    };

PresetLightColor

enum PresetLightColor

Preset light colors.

Enumerator
HALOGEN_WARM	Halogen (Warm)
HALOGEN_BASIC	Halogen.
HALOGEN_COOL	Halogen (Cool)
INCANDESCENT_FILAMENT_LAMP	Incandescent filament lamp.
FLUORESCENT_WARM_WHITE	Fluorescent (Warm White)
FLUORESCENT_COOL_WHITE	Fluorescent (Cool White)
FLUORESCENT_WHITE	Fluorescent (White)
FLUORESCENT_DAYLIGHT	Fluorescent (Daylight)
FLUORESCENT_LITE_WHITE	Fluorescent (Lite White)
HID_CERAMIC_METAL_HALIDE_WARM	HID Ceramic Metal Halide (Warm)
HID_CERAMIC_METAL_HALIDE_COOL	HID Ceramic Metal Halide (Cool)
HID_QUARTZ_METAL_HALIDE_WARM	HID Quartz Metal Halide (Warm)
HID_QUARTZ_METAL_HALIDE	HID Quartz Metal Halide.
HID_QUARTZ_METAL_HALIDE_COOL	HID Quartz Metal Halide (Cool)
HID_MERCURY	HID Mercury.
HID_PHOSPHOR_MERCURY	HID Phosphor Mercury.
HID_XENON	HID Xenon.
HID_HIGH_PRESSURE_SODIUM	HID High Pressure Sodium.
HID_LOW_PRESSURE_SODIUM	HID Low Pressure Sodium.
D65_ILLUMINANT_REFERENCE_WHITE	D65 Illuminant (Reference White)
D50_ILLUMINANT_REFERENCE_WHITE	D50 Illuminant (Reference White)

    {
        HALOGEN_WARM = 0,
        HALOGEN_BASIC,
        HALOGEN_COOL,
        INCANDESCENT_FILAMENT_LAMP,
        FLUORESCENT_WARM_WHITE,
        FLUORESCENT_COOL_WHITE,
        FLUORESCENT_WHITE,
        FLUORESCENT_DAYLIGHT,
        FLUORESCENT_LITE_WHITE,
        HID_CERAMIC_METAL_HALIDE_WARM,
        HID_CERAMIC_METAL_HALIDE_COOL,
        HID_QUARTZ_METAL_HALIDE_WARM,
        HID_QUARTZ_METAL_HALIDE,
        HID_QUARTZ_METAL_HALIDE_COOL,
        HID_MERCURY,
        HID_PHOSPHOR_MERCURY,
        HID_XENON,
        HID_HIGH_PRESSURE_SODIUM,
        HID_LOW_PRESSURE_SODIUM,
        D65_ILLUMINANT_REFERENCE_WHITE,
        D50_ILLUMINANT_REFERENCE_WHITE
    };

Member Function Documentation

GetAreaLightCustAttrib()

LightscapeLight::AreaLightCustAttrib * GetAreaLightCustAttrib ( CustAttrib *  attrib )

inlinestatic

Returns the AreaLightCustAttrib interface for a custom attribute.

Precondition

attrib is non-null

Parameters

[in]

attrib

- The custom attribute whose AreaLightCustAttrib interface is desired.

Returns

The AreaLightCustAttrib interface to attrib, or NULL if attrib doesn't support the interface.

Returns NULL if the interface is not present.

{
    return attrib == NULL ? NULL
        : static_cast<LightscapeLight::AreaLightCustAttrib*>(
            attrib->GetInterface(LS_AREALIGHTCUSTATTRIB_INTERFACE_ID));
}

SetType() [1/2]

virtual void SetType ( int  type )

pure virtual

Sets the light type.

Postcondition

The light type is changed. When setting the light type to an invalid value, nothing is changed, and no error is returned.

Parameters

[in]

type

- The type id the light is to be changed to. Must be a value in the LightTypes enum

See also

LightscapeLight::LightTypes

Reimplemented from GenLight.

SetType() [2/2]

virtual void SetType ( const MCHAR *  name )

pure virtual

Sets the light type.

Parameters

[in]

name

- The type name the light is to be changed to. May not be NULL. The valid strings are: "Target_Point" "Free_Point" "Target_Linear" "Free_Linear" "Target_Area" "Free_Area" "Target_Disc" "Free_Disc" "Target_Sphere" "Free_Sphere" "Target_Cylinder" "Free_Cylinder"

Postcondition

The light type is changed or returned. When setting the light type to an invalid value, nothing is changed, and no error is returned.

Type()

virtual int Type ( )

pure virtual

Returns the current light type.

Returns

The current light type, as a value from the LightTypes enum

See also

LightscapeLight::LightTypes

Implements GenLight.

TypeName()

virtual const MCHAR* TypeName ( )

pure virtual

Returns the light type.

Returns

The current light type, as a string

SetDistribution()

virtual void SetDistribution ( DistTypes  dist )

pure virtual

Sets the distribution of the light.

Postcondition

The distribution is changed

Parameters

[in]

dist

- The ID distribution that the light is to use. Must be a value from DistTypes.

GetDistribution()

virtual DistTypes GetDistribution ( ) const

pure virtual

Returns the distribution of the light.

Returns

The distribution ID of the current distribution.

SetIntensityAt()

virtual void SetIntensityAt ( float  f )

pure virtual

Sets the distance at which the light intensity is measured.

This distance is used then the light intensity type is LUX_AT.

Postcondition

The distance is set

Parameters

[in]

f

- The distance at which the light intensity is measured in system units. Must be greater than 0.

GetIntensityAt()

virtual float GetIntensityAt ( )

pure virtual

Returns the distance at which the light intensity is measured.

This distance is used then the light intensity type is LUX_AT.

Returns

The distance is returned.

SetIntensityType()

virtual void SetIntensityType ( IntensityType  t )

pure virtual

Sets the intensity type of the light.

Postcondition

The intensity type is set

Parameters

[in]

t

- The new intensity type of the light. Must be a value from IntensityType.

See also

LightscapeLight::IntensityType.

GetIntensityType()

virtual IntensityType GetIntensityType ( )

pure virtual

Returns the intensity type of the light.

See also

LightscapeLight::IntensityType.

SetFlux()

virtual void SetFlux ( TimeValue  t, float  flux  )

pure virtual

Sets the flux of the light.

The flux of a light is a measure of how much light the light produces. It is related to the intensity by a constant factor that depends on the distribution of the light. For example the flux of an isotropic light is always 4PI times the intensity (4PI is the area of a unit sphere).

Postcondition

The flux of the light is set, which changes the intensity.

Parameters

[in]	t	- The time at which the flux is set.
[in]	flux	- The flux to be set in lumens. Must be greater than or equal to 0.

GetFlux() [1/2]

virtual float GetFlux ( TimeValue  t, Interval &  valid  ) const

pure virtual

Returns the flux of the light.

Parameters

[in]	t	- The time at which the flux is retrieved.
[in,out]	valid	- The validity of the flux is intersected with the validity in this argument.

Returns

The flux is returned in lumens.

See also

For an explanation for flux, see LightscapeLight::SetFlux()

GetFlux() [2/2]

float GetFlux ( TimeValue  t ) const

inline

Returns the flux of the light.

Parameters

[in]

t

- The time at which the flux is retrieved.

Returns

The flux is returned in lumens.

See also

For an explanation for flux, see LightscapeLight::SetFlux()

    {
        Interval valid( 0,0 );
        return GetFlux(t, valid);
    }

SetRGBFilter()

virtual void SetRGBFilter ( TimeValue  t, Point3 &  rgb  )

pure virtual

Sets the color of the light filter.

Lightscape lights use separate values for the light color and filter color. You should imagine that the light color is the color of the light bulb, and the filter color is the color of the surrounding piece of glass or plastic. The effective color of the light is the product of the filter and light colors. The color can be set in either RGB or HSV format.

Postcondition

The filter color is changed or returned.

Parameters

[in]	t	- The time at which the filter color is set.
[in]	rgb	- The RGB color to be set

GetRGBFilter() [1/2]

virtual Point3 GetRGBFilter ( TimeValue  t, Interval &  valid  )

pure virtual

Returns the color of the light filter.

Parameters

[in]	t	- The time at which the filter color is retrieved.
[in,out]	valid	- The validity of the filter color is intersected with the validity in this argument.

Returns

The filter color is returned in either RGB format.

See also

For an explanation of the light filter, see LightscapeLight::SetRBGFilter()

GetRGBFilter() [2/2]

Point3 GetRGBFilter ( TimeValue  t )

inline

Returns the color of the light filter.

Parameters

[in]

t

- The time at which the filter color is retrieved.

Returns

The filter color is returned in either RGB format.

See also

For an explanation of the light filter, see LightscapeLight::SetRBGFilter()

    {
        Interval valid(0, 0);
        return GetRGBFilter(t, valid);
    }

SetHSVFilter()

virtual void SetHSVFilter ( TimeValue  t, Point3 &  hsv  )

pure virtual

Sets the color of the light filter.

Postcondition

The filter color is changed or returned.

Parameters

[in]	t	- The time at which the filter color is set.
[in]	hsv	- The HSV color to be set

See also

For an explanation of the light filter, see LightscapeLight::SetRBGFilter()

GetHSVFilter() [1/2]

virtual Point3 GetHSVFilter ( TimeValue  t, Interval &  valid  )

pure virtual

Returns the color of the light filter.

Parameters

[in]	t	- The time at which the filter color is retrieved.
[in,out]	valid	- The validity of the filter color is intersected with the validity in this argument.

Returns

The filter color is returned in either HSV format.

See also

For an explanation of the light filter, see LightscapeLight::SetRBGFilter()

GetHSVFilter() [2/2]

Point3 GetHSVFilter ( TimeValue  t )

inline

Returns the color of the light filter.

Parameters

[in]

t

- The time at which the filter color is retrieved.

Returns

The filter color is returned in either HSV format.

See also

For an explanation of the light filter, see LightscapeLight::SetRBGFilter()

    {
        Interval valid( 0,0 );
        return GetHSVFilter(t, valid);
    }

ActiveShadowType()

virtual ShadowType* ActiveShadowType ( )

pure virtual

Returns the plug-in shadow generator.

There are two shadow generators that can be used by a light. The local shadow generator that is referenced by the light and the global shadow generator that is in the scene. The LightObject methods GetUseGlobal() and SetUseGlobal() access the parameter that determines which shadow generator is actually used. GetShadowGenerator() always returns the local shadow generator, while other methods return and set the shadow generator based on the value of the use global parameter.

Returns

The shadow generator is returned.

GetShadowGeneratorName()

virtual const MCHAR* GetShadowGeneratorName ( )

pure virtual

Returns the plug-in shadow generator name.

Returns

The local or global shadow generator name, depending on the value of the use global parameter.

See also

For an explanation of local and global shadow generators, see LightscapeLight::ActiveShadowType()

SetShadowGenerator() [1/2]

virtual void SetShadowGenerator ( ShadowType *  s )

overridepure virtual

Sets the plug-in shadow generator.

Postcondition

The shadow generator is set.

Parameters

[in]

s

- An instance of the shadow type to be set. The light establishes a reference to this object.

See also

For an explanation of local and global shadow generators, see LightscapeLight::ActiveShadowType()

Reimplemented from GenLight.

SetShadowGenerator() [2/2]

virtual void SetShadowGenerator ( const MCHAR *  name )

pure virtual

Sets the plug-in shadow generator.

Postcondition

The shadow generator is set.

Parameters

[in]

name

- The class name of the shadow type to be set.

See also

For an explanation of local and global shadow generators, see LightscapeLight::ActiveShadowType()

SetInclude()

virtual void SetInclude ( BOOL  onOff )

pure virtual

Sets whether the Include/Exclude list should include or exclude objects.

Postcondition

The flag value is set.

Parameters

[in]

onOff

- The flag value to be set. TRUE indicates that the light should include objects in the Include/Exclude list.

UpdateTargDistance()

virtual void UpdateTargDistance ( TimeValue  t, INode *  inode  )

pure virtual

Update the target distance parameter of the light to the distance between the light target and the light.

Precondition

The inode should have a target. Nothing is changed if no target is present, however, the method does not check whether this light is attached to the inode argument.

Postcondition

The distance is updated.

Parameters

[in]	t	- The time at which the distance is calculated and set.
[in]	inode	- The node to be used to calculate the target.

Reimplemented from LightObject.

SetKelvinControl()

virtual BOOL SetKelvinControl ( Control *  kelvin )

pure virtual

Sets the controller for the Kelvin temperature.

Postcondition

The controller is set.

Parameters

[in]

kelvin

- The new controller to use for kelvin temperature. NULL will remove any animation.

SetFilterControl()

virtual BOOL SetFilterControl ( Control *  filter )

pure virtual

Sets the controller for the filter color.

Postcondition

The controller is set.

Parameters

[in]

filter

- The new controller to use for filter color. NULL will remove any animation.

GetKelvinControl()

virtual Control* GetKelvinControl ( )

pure virtual

Returns the controller for the Kelvin temperature.

Returns

The controller is returned.

GetFilterControl()

virtual Control* GetFilterControl ( )

pure virtual

Returns the controller for the filter color.

Returns

The controller is returned.

GetKelvin() [1/2]

virtual float GetKelvin ( TimeValue  t, Interval &  v  )

pure virtual

Returns the Kelvin temperature of the light.

Kelvin temperature is a method for retrieving light color based on black body radiation from physics.

Parameters

[in]	t	- The time at which the color is retrieved.
[in,out]	v	- The validity of the color is intersected with this argument.

Returns

The current kelvin temperature.

GetKelvin() [2/2]

float GetKelvin ( TimeValue  t )

inline

Returns the Kelvin temperature of the light.

Kelvin temperature is a method for retrieving light color based on black body radiation from physics.

Parameters

[in]

t

- The time at which the color is retrieved.

Returns

The current kelvin temperature.

    {
        Interval v(0,0);
        return GetKelvin(t, v);
    }

SetKelvin()

virtual void SetKelvin ( TimeValue  t, float  kelvin  )

pure virtual

Sets the Kelvin temperature of the light.

Kelvin temperature is a method for specifying light color based on black body radiation from physics.

Postcondition

The kelvin temperature is changed.

Parameters

[in]	t	- The time at which the color is set.
[in]	kelvin	- The kelvin temperature in degrees Kelvin. Should be greater than or equal to 0.

GetUseKelvin()

virtual BOOL GetUseKelvin ( )

pure virtual

Returns whether the kelvin temperature or light color is to be used.

The light color can be set using either an RGB value or a kelvin temperature.

Returns

TRUE if the kelvin temperature is used, or FALSE if the RBG value is used.

SetUseKelvin()

virtual void SetUseKelvin ( BOOL  useKelvin )

pure virtual

Sets whether the kelvin temperature or light color is to be used.

The light color can be set using either an RGB value or a kelvin temperature.

Postcondition

The flag value is changed or returned.

Parameters

[in]

useKelvin

- TRUE to use the kelvin temperature, or FALSE to use the RGB value.

GetWebFile()

virtual MaxSDK::AssetManagement::AssetUser GetWebFile ( ) const

pure virtual

Returns the web distribution file for the light as an AssetUser.

Returns

The AssetUser is returned.

GetFullWebFileName()

virtual const MCHAR* GetFullWebFileName ( ) const

pure virtual

Returns the filename of the web distribution file for the light.

The full web filename is the full path to the web filename. If the file couldn't be found or the current distribution is not the web distribution, the filename stored in the light is returned.

Returns

The filename is returned.

SetWebFile()

virtual void SetWebFile ( const MaxSDK::AssetManagement::AssetUser &  file )

pure virtual

Sets the web distribution file for the light.

Postcondition

The file is set

Parameters

[in]

file

- The new file for the web distribution

GetWebRotateX()

virtual float GetWebRotateX ( ) const

pure virtual

Returns the rotation along the X axis of the web distribution in the light.

Returns

The rotation in degrees is returned.

SetWebRotateX()

virtual void SetWebRotateX ( float  degrees )

pure virtual

Sets the rotation along the X axis for the web distribution in the light.

Postcondition

The rotation is set.

Parameters

[in]

degrees

- The amount of rotation in degrees.

GetWebRotateY()

virtual float GetWebRotateY ( ) const

pure virtual

Returns the rotation along the Y axis of the web distribution in the light.

Returns

The rotation in degrees is returned.

SetWebRotateY()

virtual void SetWebRotateY ( float  degrees )

pure virtual

Sets the rotation along the Y axis for the web distribution in the light.

Postcondition

The rotation is set.

Parameters

[in]

degrees

- The amount of rotation in degrees.

GetWebRotateZ()

virtual float GetWebRotateZ ( ) const

pure virtual

Returns the rotation along the Z axis of the web distribution in the light.

Returns

The rotation in degrees is returned.

SetWebRotateZ()

virtual void SetWebRotateZ ( float  degrees )

pure virtual

Sets the rotation along the Z axis for the web distribution in the light.

Postcondition

The rotation is set.

Parameters

[in]

degrees

- The amount of rotation in degrees.

GetDimmerValue() [1/2]

virtual float GetDimmerValue ( TimeValue  t, Interval &  valid  ) const

pure virtual

Returns the dimmer value for the light.

An additional dimmer can be used to independently modify the light intensity.

Parameters

[in]	t	- The time at which the dimmer value is retrieved.
[in,out]	valid	- The validity of the dimmer is intersected with the validity in this argument.

Returns

the dimmer value is returned.

GetDimmerValue() [2/2]

float GetDimmerValue ( TimeValue  t ) const

inline

Returns the dimmer value for the light.

An additional dimmer can be used to independently modify the light intensity.

Parameters

[in]

t

- The time at which the dimmer value is retrieved.

Returns

the dimmer value is returned.

{ Interval valid( 0,0 ); return GetDimmerValue(t, valid); }

SetDimmerValue()

virtual void SetDimmerValue ( TimeValue  t, float  dimmer  )

pure virtual

Sets the dimmer value for the light.

An additional dimmer can be used to independently modify the light intensity.

Postcondition

The dimmer value is set.

Parameters

[in]	t	- The time at which the dimmer value is set.
[in]	dimmer	- The value of the dimmer. 1.0 is full-on. 0.0 if full-off.

GetUseMultiplier()

virtual BOOL GetUseMultiplier ( ) const

pure virtual

Returns whether the dimmer is used.

Returns

The value of the flag is returned.

SetUseMultiplier()

virtual void SetUseMultiplier ( BOOL  on )

pure virtual

Sets whether the dimmer is used.

Postcondition

The value of the flag is changed.

Parameters

[in]

on

- The value of the flag to be set. TRUE indicates that the dimmer is used.

IsColorShiftEnabled()

virtual BOOL IsColorShiftEnabled ( ) const

pure virtual

Returns whether the light's intensity shifts (affects) its color.

Note that this parameter is really activated only if GetUseMultiplier() is true.

Returns

The value of the flag is returned.

EnableColorShift()

virtual void EnableColorShift ( BOOL  on )

pure virtual

Sets whether the color of the light shifts when its intensity changes Note that this parameter is really activated only if GetUseMultiplier() is true.

Postcondition

The value of the flag is changed.

Parameters

[in]

on

- If true, the changes in the light's intensity will cause shifts in the light's color, otherwise the light's color will be unaffected by the intensity

GetResultingIntensity() [1/2]

virtual float GetResultingIntensity ( TimeValue  t, Interval &  valid  ) const

pure virtual

Returns the intensity including the dimmer multiplier if it is used.

This utility method returns the effective intensity of a light including the dimmer value if there is one.

Parameters

[in]	t	- The time at which to retrieve the intensity or flux.
[in,out]	valid	- The validity of the effective intensity is intersected with this argument. This includes the validity of the dimmer.

Returns

The effective intensity in candelas.

GetResultingIntensity() [2/2]

float GetResultingIntensity ( TimeValue  t ) const

inline

Returns the intensity including the dimmer multiplier if it is used.

This utility method returns the effective intensity of a light including the dimmer value if there is one.

Parameters

[in]

t

- The time at which to retrieve the intensity or flux. This includes the validity of the dimmer.

Returns

The effective intensity in candelas.

{ Interval valid( 0,0 ); return GetResultingIntensity(t, valid); }

GetResultingFlux() [1/2]

virtual float GetResultingFlux ( TimeValue  t, Interval &  valid  ) const

pure virtual

Returns the flux including the dimmer multiplier if it is used.

This utility method returns the effective flux of a light including the dimmer value if there is one.

Parameters

[in]	t	- The time at which to retrieve the intensity or flux.
[in,out]	valid	- The validity of the effective flux is intersected with this argument. This includes the validity of the dimmer.

Returns

The effective flux in lumens.

GetResultingFlux() [2/2]

float GetResultingFlux ( TimeValue  t ) const

inline

Returns the flux including the dimmer multiplier if it is used.

This utility method returns the effective flux of a light including the dimmer value if there is one.

Parameters

[in]

t

- The time at which to retrieve the intensity or flux. This includes the validity of the dimmer.

Returns

The effective flux in lumens.

{ Interval valid( 0,0 ); return GetResultingFlux(t, valid); }

GetCenter()

virtual Point3 GetCenter ( ) const

pure virtual

Returns the location of the center of the light.

This location is in the light's coordinates.

Returns

The light coordinate of the center of the light.

GetRadius() [1/2]

virtual float GetRadius ( TimeValue  t, Interval &  valid  ) const

pure virtual

Returns the radius of a disc, sphere, cylinder light.

This method allows to access the radius of a disc, sphere or cylinder light type.

Parameters

[in]	t	- The time at which the radius is retrieved.
[in,out]	valid	- The validity interval of the radius is intersected with this argument.

Returns

The radius of the light, or zero if the light is not of any of the above mentioned types.

GetRadius() [2/2]

float GetRadius ( TimeValue  t ) const

inline

Returns the radius of a disc, sphere, cylinder light.

This method allows to access the radius of a disc, sphere or cylinder light type.

Parameters

[in]

t

- The time at which the radius is retrieved.

Returns

The radius of the light, or zero if the light is not of any of the above mentioned types.

{ Interval valid(0,0); return GetRadius(t, valid); }

SetRadius()

virtual void SetRadius ( TimeValue  t, float  radius  )

pure virtual

Sets the radius of a disc, sphere, cylinder light.

This method allows to set the radius of a disc, sphere or cylinder light. If the light is not of one of the above mentioned types, the method is a no-op.

Parameters

[in]	t	- The time at which the radius is set.
[in]	radius	- The new radius value

GetLength() [1/2]

virtual float GetLength ( TimeValue  t, Interval &  valid  ) const

pure virtual

Returns the length of a linear, area, cylinder light.

This method allows to access the length of a linear, area, or cylinder light.

Parameters

[in]	t	- The time at which the length is retrieved.
[in,out]	valid	- The validity interval of the length is intersected with this argument.

Returns

The length of the light, or zero if the light is not of any of the above mentioned types.

GetLength() [2/2]

float GetLength ( TimeValue  t ) const

inline

Returns the length of a linear, area, cylinder light.

This method allows to access the length of a linear, area, or cylinder light.

Parameters

[in]

t

- The time at which the length is retrieved.

Returns

The length of the light, or zero if the light is not of any of the above mentioned types.

{ Interval valid(0,0); return GetLength(t, valid); }

SetLength()

virtual void SetLength ( TimeValue  t, float  length  )

pure virtual

Sets the length of a linear, area, cylinder light.

This method allow to set the length of a linear, area, cylinder light. If the light is not of one of the above mentioned types, the method is a no-op.

Parameters

[in]	t	- The time at which the length is set.
[in]	length	- The new length value

GetWidth() [1/2]

virtual float GetWidth ( TimeValue  t, Interval &  valid  ) const

pure virtual

Returns the width of an area light.

This method allows to access the width of an area light.

Parameters

[in]	t	- The time at which the width is retrieved.
[in,out]	valid	- The validity interval of the width is intersected with this argument.

Returns

The width of the light, or zero if the light is not of any of the above mentioned types.

GetWidth() [2/2]

float GetWidth ( TimeValue  t ) const

inline

Returns the width of an area light.

This method allows to access the width of an area light.

Parameters

[in]

t

- The time at which the width is retrieved.

Returns

The width of the light, or zero if the light is not of any of the above mentioned types.

{ Interval valid(0,0); return GetWidth(t, valid); }

SetWidth()

virtual void SetWidth ( TimeValue  t, float  width  )

pure virtual

Sets the width of an area light.

This method allows to set the width of an area light. If the light is not of one of the above mentioned types, the method is a no-op.

Parameters

[in]	t	- The time at which the width is set.
[in]	width	- The new width value

SetShape()

virtual void SetShape ( int  count, const Point3 *  pointsIn  )

pure virtual

Sets the coordinates of the light.

The use of this functions varies based on the current light type. If the light is a point light, the center is set to the center of the set of points. If the light is a linear light the light's line segment is set to the segment between the first two points. If fewer than two points are specified, no change is made. If the light is an area light, the light area is set to the triangle or quadrilateral defined by the 3 or 4 points, respectively. If fewer than 3 points is specified, no change is made. If more than 4 points is specified a quadrilateral is made from the first 4 points.

Precondition

All points are in light coordinates. Quadrilaterals must be planar.

Postcondition

The shape is changed.

Parameters

[in]	count	- Number of points of the shape.
[in]	pointsIn	- The array of points in the shape.

GetShape()

virtual int GetShape ( Point3 *  pointsOut, int  bufSize  ) const

pure virtual

Returns the coordinates of the light.

Parameters

[out]	pointsOut	- The buffer that will receive the vertices in the shape. If bufSize is 0 this can be NULL.
[in]	bufSize	- The number of points in the buffer. Only the vertices that fit in the buffer will be stored. The return value will include the count of vertices that could not be stored.

Returns

The total number of vertices in the shape. This is independent of the number of point in the receiving buffer.

See also

For further usage notes, see LightscapeLight::SetShape()

GetOriginalFlux()

virtual float GetOriginalFlux ( ) const

pure virtual

Returns the original flux for a light.

This is the original flux in the web distribution for a light.

Returns

The original flux in lumens is returned.

SetOriginalFlux()

virtual void SetOriginalFlux ( float  flux )

pure virtual

Sets the original flux for a light.

This is the original flux in the web distribution for a light. It can be used to reset a light intensity to a default value. The method can be used, but the flux will be reset if the web filename is changed.

Postcondition

The original flux is set

Parameters

[in]

flux

- The flux to be set, in lumens.

GetOriginalIntensity()

virtual float GetOriginalIntensity ( ) const

pure virtual

Returns the original intensity for a light.

This is the original intensity in the web distribution for a light.

Returns

The original intensity in candelas is returned.

SetOriginalIntensity()

virtual void SetOriginalIntensity ( float  candelas )

pure virtual

Sets the original intensity for a light.

This is the original intensity in the web distribution for a light. It can be used to reset a light intensity to a default value. The method can be used, but the intensity will be reset if the web filename is changed.

Postcondition

The original intensity is set.

Parameters

[in]

candelas

- The intensity to be set, in candelas

GetColorPreset()

virtual PresetLightColor GetColorPreset ( ) const

pure virtual

Returns the color preset of the light.

Color preset is used when Kelvin temperature is not used. See LightscapeLight::GetUseKelvin().

Returns

The current preset color.

SetColorPreset()

virtual void SetColorPreset ( PresetLightColor  presetID )

pure virtual

Sets the preset color of the light to be used.

Color preset is used when Kelvin temperature is not used. See LightscapeLight::GetUseKelvin().

Parameters

[in]

presetID

- The time at which the color is set.