Solver message 309222
Message Text
** ERROR 309222 ** Fiber mat composite orientation is not specified or wrong.
Check the data and run the analysis again.
Explanation
To run a warp analysis in Resin Transfer Molding, the software requires information about the fiber mat composite material. By default, the composite orientation is the same as the preform orientation:
Composite orientation (1st principal direction)
- dx=1
- dy=0
- dz=0
Composite orientation (2nd principal direction)
- dx=0
- dy=1
- dz=0
The values for your analysis have either been removed, or changed so that they cannot be understood by the software.
Resolution
Enter valid numbers for your fiber mat composite orientation.
- Select all the preform elements, then right-click and select Properties.
- Select the Composite Properties tab, and check the composite orientation.
- Enter the correct orientation values for your fiber mat composite, or use the default values above.