#include <MDataHandle.h>

Class Description

Data handle for information contained in a data block.

An MDataHandle is a smart pointer into a data block (MDataBlock). A data handle corresponds to the data for a particular attribute or plug. For array data (eg CVs of a curve) use an MArrayDataHandle. To get a data handle, request it from the data block.

Some simple numeric data is handled directly by the dependency graph. If the data is more complicated (eg surface geometry), then the data handle can supply a pointer that should be given to the appropriate data function set.

MDataHandle allows the manipulation and setting of generic attributes as created by the MFnGenericAttribute class. It is possible to create numeric generic attributes using two scenarios. A plug-in may request that the generic attribute support singleton types such as MFnNumericData::kFloat or kChar. Or a plug-in may request array types such as MFnNumericData::k2Float k2Double. In the singleton case, getting and setting the attribute using MDataHandle is done with the asGeneric*() or setGeneric*() methods. In the case of the array types, the MDataHandle.data() method can be used to retrieve the MObject for the attribute and to initialize the MFnNumericData function set. A call to MDataHandle::setData() on the updated attribute must be made to pass the information back to Maya. NOTE: It is not possible to distinguish the singleton generic types from one another. There is no method that can be called to return if the singleton generic attribute is a float, char etc.

MDataHandle methods cannot be assumed to be threadsafe.

Examples:: AbcBullet/MayaTransformCollectionWriter.cpp, AbcImport/AlembicNode.cpp, AbcImport/NodeIteratorVisitorHelper.cpp, AbcImport/NodeIteratorVisitorHelper.h, affectsNode/affectsNode.cpp, animCubeNode/animCubeNode.cpp, anisotropicShader/anisotropicShader.cpp, apiDirectionalLightShape/apiDirectionalLightShape.cpp, apiMeshShape/apiMeshCreator.cpp, apiMeshShape/apiMeshShape.cpp, apiMeshShape/apiMeshShape.h, arcLenNode/arcLenNode.cpp, backfillShader/backfillShader.cpp, basicBlendShape/basicBlendShape.cpp, blindDataShader/blindDataMesh.cpp, blindDataShader/blindDataShader.cpp, brickShader/brickShader.cpp, buildRotationNode/buildRotationNode.cpp, cellShader/cellShader.cpp, cgFx/cgfxShaderNode.cpp, cgFx/cgfxShaderNode.h, cgFx/cgfxVector.cpp, checkerShader/checkerShader.cpp, circleNode/circleNode.cpp, clearcoat.cpp, closestPointOnCurve/closestPointOnCurveNode.cpp, compositingShader/compositingShader.cpp, constraintEvaluator/constraintEvaluator.cpp, contrastShader/contrastShader.cpp, customImagePlane/customImagePlane.cpp, cvColorNode/cvColorNode.cpp, cvColorShader/cvColorShader.cpp, depthShader/depthShader.cpp, displacementShader/displacementShader.cpp, dx11Shader/dx11ConeAngleToHotspotConverter.cpp, dx11Shader/dx11Shader.cpp, dx11Shader/dx11Shader.h, dynExprField/dynExprField.cpp, fileTexture/fileTexture.cpp, flameShader/flameShader.cpp, fullLoftNode/fullLoftNode.cpp, gameInputDevice/gameInputDevice.cpp, gammaShader/gammaShader.cpp, genericAttributeNode/genericAttributeNode.cpp, geometrySurfaceConstraint/geometrySurfaceConstraint.cpp, geomShader/geomShader.cpp, glslShader/GLSLShader.cpp, glslShader/GLSLShader.h, gpuCache/gpuCacheShapeNode.cpp, gpuCache/gpuCacheShapeNode.h, hlslShader/hlslShader.cpp, hlslShader/hlslShader.h, hwColorPerVertexShader/hwColorPerVertexShader.cpp, hwDecalBumpShader_NV20/hwDecalBumpShader_NV20.cpp, hwPhongShader/hwPhongShader.cpp, hwPhongShader/hwPhongShader.h, hwReflectBumpShader_NV20/hwReflectBumpShader_NV20.cpp, hwRefractReflectShader_NV20/hwRefractReflectShader_NV20.cpp, hwToonShader_NV20/hwToonShader_NV20.cpp, hwUnlitShader/hwUnlitShader.cpp, interpShader/interpShader.cpp, jitterNode/jitterNode.cpp, lambertShader/lambertShader.cpp, latticeNoise/latticeNoiseNode.cpp, lavaShader/lavaShader.cpp, lightShader/lightShader.cpp, manipOverride/rockingTransform2.cpp, manipOverride/rockingTransform2.h, MayaPluginForSpreticle/spReticleLoc.cpp, MayaPluginForSpreticle/spReticleLoc.h, meshOpCmd/meshOpNode.cpp, MetadataSample/tweakMetadataNode.cpp, mixtureShader/mixtureShader.cpp, multiCurveNode/multiCurveNode.cpp, multiPlugInfoCmd/multiPlugInfoCmd.cpp, noiseShader/noiseShader.cpp, offsetNode/offsetNode.cpp, onbShader/onbShader.cpp, ownerEmitter/ownerEmitter.cpp, ownerEmitter/ownerEmitter.h, phongShader/phongShader.cpp, pnTriangles/pnTrianglesNode.cpp, pnTriangles/pnTrianglesNode.h, pointOnMeshInfo/pointOnMeshInfoNode.cpp, pointOnSubdNode/pointOnSubdNode.cpp, quadricShape/quadricShape.cpp, randomizerDevice/randomizerDevice.cpp, renderAccessNode/renderAccessNode.cpp, rockingTransform/rockingTransform.cpp, rockingTransform/rockingTransform.h, rockingTransformCheck/rockingTransform.cpp, rockingTransformCheck/rockingTransform.h, rockingTransformCheck/rockingTransformCheck.cpp, sceneAssembly/assemblyReference.cpp, sceneAssembly/assemblyReference.h, selectClosestPointLocator/selectClosestPointLocator.cpp, shadowMatteShader/shadowMatteShader.cpp, shellNode/shellNode.cpp, shiftNode/shiftNode.cpp, simpleEmitter/simpleEmitter.cpp, simpleEmitter/simpleEmitter.h, simpleEvaluationDraw/simpleEvaluationDraw.cpp, simpleEvaluationNode/simpleEvaluationNode.cpp, simpleFluidEmitter/simpleFluidEmitter.cpp, simpleLoftNode/simpleLoftNode.cpp, simpleNoiseShader/simpleNoiseShader.cpp, simpleSpring/simpleSpring.h, sineNode/sineNode.cpp, slopeShader/slopeShaderNode.cpp, solidCheckerShader/solidCheckerShader.cpp, splatDeformer/splatDeformer.cpp, splitUVCmd/splitUVNode.cpp, sseDeformer/sseDeformer.cpp, stringFormatNode/stringFormatNode.cpp, sweptEmitter/sweptEmitter.cpp, sweptEmitter/sweptEmitter.h, testNobjectNode/testNobjectNode.cpp, testNpassiveNode/testNpassiveNode.cpp, torusField/torusField.cpp, torusField/torusField.h, transCircleNode/transCircleNode.cpp, udpDevice/udpDevice.cpp, volumeShader/volumeShader.cpp, vp2BlinnShader/vp2BlinnShader.cpp, weightListNode/weightListNode.cpp, and yTwistNode/yTwistNode.cpp.

Public Member Functions
	MDataHandle ()
	Constructor for MDataHandle. More...

bool	isNumeric () const
	Returns true if this handle is for simple numeric data. More...

bool	isGeneric (bool &isNumeric, bool &isNull) const
	Returns true if this handle is for generic data. More...

MFnNumericData::Type	numericType () const
	Returns the type of data represented by this handle. More...

MFnData::Type	type () const
	Returns the type of data represented by this handle. More...

MTypeId	typeId () const
	Returns the type of data represented by this handle as a type id. More...

MStatus	acceptedTypeIds (MUintArray &) const
	This method returns an array of MTypeId ids that the data handle can accept. More...

MObject	data ()
	Returns the data object from this handle. More...

MStatus	copy (const MDataHandle &src)
	Copies the attribute from the src attribute to the attribute referenced by this handle. More...

MStatus	copyWritable (const MDataHandle &src)
	Copies the attribute from the src attribute to the attribute referenced by this handle. More...

void	setClean ()
	Marks the data that is represented by this handle as being clean. More...

bool &	asBool () const
	Returns the data represented by this handle in the data block. More...

char &	asChar () const
	Returns the data represented by this handle in the data block. More...

unsigned char &	asUChar () const
	Returns the data represented by this handle in the data block. More...

short &	asShort () const
	Returns the data represented by this handle in the data block. More...

int &	asLong () const
	This method is obsolete. More...

int &	asInt () const
	Returns the data represented by this handle in the data block. More...

MInt64 &	asInt64 () const
	Returns the data represented by this handle in the data block. More...

void *&	asAddr () const
	Returns the data represented by this handle in the data block. More...

float &	asFloat () const
	Returns the data represented by this handle in the data block. More...

double &	asDouble () const
	Returns the data represented by this handle in the data block. More...

MDistance	asDistance () const
	Returns the data represented by this handle in the data block. More...

MAngle	asAngle () const
	Returns the data represented by this handle in the data block. More...

MTime	asTime () const
	Returns the data represented by this handle in the data block. More...

short2 &	asShort2 () const
	Returns the data represented by this handle in the data block. More...

long2 &	asLong2 () const
	This method is obsolete. More...

int2 &	asInt2 () const
	Returns the data represented by this handle in the data block. More...

float2 &	asFloat2 () const
	Returns the data represented by this handle in the data block. More...

double2 &	asDouble2 () const
	Returns the data represented by this handle in the data block. More...

short3 &	asShort3 () const
	Returns the data represented by this handle in the data block. More...

long3 &	asLong3 () const
	This method is obsolete. More...

int3 &	asInt3 () const
	Returns the data represented by this handle in the data block. More...

float3 &	asFloat3 () const
	Returns the data represented by this handle in the data block. More...

double3 &	asDouble3 () const
	Returns the data represented by this handle in the data block. More...

MVector &	asVector () const
	Returns the data represented by this handle in the data block. More...

MFloatVector &	asFloatVector () const
	Returns the data represented by this handle in the data block. More...

MMatrix &	asMatrix () const
	Returns the data represented by this handle in the data block. More...

MFloatMatrix &	asFloatMatrix () const
	Returns the data represented by this handle in the data block. More...

MString &	asString () const
	Returns the data represented by this handle in the data block. More...

MObject	asNurbsCurve () const
	Returns the data represented by this handle in the data block. More...

MObject	asNurbsSurface () const
	Returns the data represented by this handle in the data block. More...

MObject	asMesh () const
	Returns the data represented by this handle in the data block. More...

MObject	asSubdSurface () const
	Returns the data represented by this handle in the data block. More...

MObject	asNurbsCurveTransformed () const
	Returns the data represented by this handle in the data block. More...

MObject	asNurbsSurfaceTransformed () const
	Returns the data represented by this handle in the data block. More...

MObject	asMeshTransformed () const
	Returns the data represented by this handle in the data block. More...

MObject	asSubdSurfaceTransformed () const
	Returns the data represented by this handle in the data block. More...

const MMatrix &	geometryTransformMatrix () const
	This method returns a reference to the local-to-world transformation matrix that can accompany a geometry data object. More...

MPxData *	asPluginData () const
	Returns the data represented by this handle in the data block. More...

void	set (bool)
	No script support. More...

void	set (char)
	No script support. More...

void	set (short)
	No script support. More...

void	set (int)
	No script support. More...

void	set (MInt64)
	No script support. More...

void	set (float)
	No script support. More...

void	set (double)
	No script support. More...

void	set (const MMatrix &)
	No script support. More...

void	set (const MFloatMatrix &)
	No script support. More...

void	set (const MVector &)
	No script support. More...

void	set (const MFloatVector &)
	No script support. More...

void	set (const MDistance &)
	No script support. More...

void	set (const MAngle &)
	No script support. More...

void	set (const MTime &)
	No script support. More...

void	set (short, short)
	No script support. More...

void	set (int, int)
	No script support. More...

void	set (float, float)
	No script support. More...

void	set (double, double)
	No script support. More...

void	set (short, short, short)
	No script support. More...

void	set (int, int, int)
	No script support. More...

void	set (float, float, float)
	No script support. More...

void	set (double, double, double)
	No script support. More...

void	set (const MString &)
	No script support. More...

MStatus	set (const MObject &data)
	No script support. More...

MStatus	set (MPxData *data)
	No script support. More...

void	setBool (bool)
	Set the data that this handle represents in the data block. More...

void	setChar (char)
	Set the data that this handle represents in the data block. More...

void	setShort (short)
	Set the data that this handle represents in the data block. More...

void	setInt (int)
	Set the data that this handle represents in the data block. More...

void	setInt64 (MInt64)
	Set the data that this handle represents in the data block. More...

void	setFloat (float)
	Set the data that this handle represents in the data block. More...

void	setDouble (double)
	Set the data that this handle represents in the data block. More...

void	setMMatrix (const MMatrix &)
	Set the data that this handle represents in the data block. More...

void	setMFloatMatrix (const MFloatMatrix &)
	Set the data that this handle represents in the data block. More...

void	setMVector (const MVector &)
	Set the data that this handle represents in the data block. More...

void	setMFloatVector (const MFloatVector &)
	Set the data that this handle represents in the data block. More...

void	setMDistance (const MDistance &)
	Set the data that this handle represents in the data block. More...

void	setMAngle (const MAngle &)
	Set the data that this handle represents in the data block. More...

void	setMTime (const MTime &)
	Set the data that this handle represents in the data block. More...

void	set2Short (short, short)
	Set the data that this handle represents in the data block. More...

void	set2Int (int, int)
	Set the data that this handle represents in the data block. More...

void	set2Float (float, float)
	Set the data that this handle represents in the data block. More...

void	set2Double (double, double)
	Set the data that this handle represents in the data block. More...

void	set3Short (short, short, short)
	Set the data that this handle represents in the data block. More...

void	set3Int (int, int, int)
	Set the data that this handle represents in the data block. More...

void	set3Float (float, float, float)
	Set the data that this handle represents in the data block. More...

void	set3Double (double, double, double)
	Set the data that this handle represents in the data block. More...

void	setString (const MString &)
	Set the data that this handle represents in the data block. More...

MStatus	setMObject (const MObject &data)
	Set the data that this handle represents in the data block. More...

MStatus	setMPxData (MPxData *data)
	Set the data that this handle represents in the data block. More...

bool	asGenericBool () const
	Returns the generic data represented by this handle in the data block. More...

unsigned char	asGenericChar () const
	Returns the generic data represented by this handle in the data block. More...

double	asGenericDouble () const
	Returns the generic data represented by this handle in the data block. More...

float	asGenericFloat () const
	Returns the generic data represented by this handle in the data block. More...

short	asGenericShort () const
	Returns the generic data represented by this handle in the data block. More...

int	asGenericInt () const
	Returns the generic data represented by this handle in the data block. More...

MInt64	asGenericInt64 () const
	Returns the generic data represented by this handle in the data block. More...

void	setGenericBool (bool value, bool force)
	Set the data that this handle represents in the data block. More...

void	setGenericChar (unsigned char value, bool force)
	Set the data that this handle represents in the data block. More...

void	setGenericDouble (double value, bool force)
	Set the data that this handle represents in the data block. More...

void	setGenericFloat (float value, bool force)
	Set the data that this handle represents in the data block. More...

void	setGenericShort (short value, bool force)
	Set the data that this handle represents in the data block. More...

void	setGenericInt (int value, bool force)
	Set the data that this handle represents in the data block. More...

void	setGenericInt64 (MInt64 value, bool force)
	Set the data that this handle represents in the data block. More...

MDataHandle	child (const MPlug &plug)
	Get a handle to a child of this handle. More...

MDataHandle	child (const MObject &attribute)
	Get a handle to a child of this handle. More...

MDataHandle &	operator= (const MDataHandle &other)
	Assignment operator. More...

	MDataHandle (const MDataHandle &)
	Copy constructor.

Static Public Member Functions
static const char *	className ()
	Returns the name of this class. More...

Friends
class	MDataBlock

class	MArrayDataBuilder

class	MArrayDataHandle

class	MItGeometry

Constructor & Destructor Documentation

MDataHandle ( )

Constructor for MDataHandle.

Typically, data handles will be obtained from the data block (MDataBlock). A user constructed MDataHandle should not be used until a valid data handle has been assigned to it (ie. using the assignment operator).

Member Function Documentation

bool isNumeric ( ) const

Returns true if this handle is for simple numeric data.

That means that the numeric data is directly accessible through the non-generic as*() and set*() methods of this handle. For example, depending on handle initialization, the asBool() may be called but the asGenericBool() should not be called.

Returns: Whether this handle points to simple numeric data

Examples:: multiPlugInfoCmd/multiPlugInfoCmd.cpp.

bool isGeneric	(	bool &	isNumeric,
		bool &	isNull
	)		const

Returns true if this handle is for generic data.

There are 2 forms of generic data. The first is for simple data and is used if the isNumeric parameter returns true. In this case, the asGeneric*() and setGeneric*() methods of this class are used to query and set values. The second form of generic data is for more complex attribute types. As a result the type of the object must be checked and an appropriate attribute function set initialized with the object.

Parameters

[out]	isNumeric	returns true if this handle is for simple generic numeric data
[out]	isNull	returns true if this handle is not set

Returns: True will be returned if this handle points to a generic attribute

Examples:: genericAttributeNode/genericAttributeNode.cpp.

MFnNumericData::Type numericType ( ) const

Returns the type of data represented by this handle.

This method is only valid for data handles of simple numeric types.

Returns: The numeric type

Examples:: multiPlugInfoCmd/multiPlugInfoCmd.cpp.

MFnData::Type type ( ) const

Returns the type of data represented by this handle.

Returns: The data type

Examples:: dx11Shader/dx11Shader.cpp, glslShader/GLSLShader.cpp, splatDeformer/splatDeformer.cpp, and sseDeformer/sseDeformer.cpp.

MTypeId typeId ( ) const

Returns the type of data represented by this handle as a type id.

A type id is a four character code that is used to identify the data type. If no data exists for this handle, the type id will be 0x0.

Returns: The data type

MStatus acceptedTypeIds ( MUintArray & typids ) const

This method returns an array of MTypeId ids that the data handle can accept.

The MTypeId can be reconstructed using the unsigned int in id.

Parameters

[out] typids an unsigned int array to copy the ids to

Returns: Status code

Status Codes:

MS::kSuccess The method was successful
MS::kFailure The method failed

MObject data ( )

Returns the data object from this handle.

The object returned should be used with the appropriate data function set. This method is not valid for simple numeric types.

Returns: The data object

MStatus copy ( const MDataHandle & src )

Copies the attribute from the src attribute to the attribute referenced by this handle.

This is the only method which can completely copy a compound attribute from one handle to another. The construct outputHandle.set (inputHandle.data()) will not work for compound or multi attributes.

Parameters

[in] src the handle to the attribute to copy

Returns: Status code

Status Codes:

MS::kSuccess The method was successful
MS::kFailure The method failed

MStatus copyWritable ( const MDataHandle & src )

Copies the attribute from the src attribute to the attribute referenced by this handle.

When the copy is made it ensures that the data in this handle is writable. That is, if the src handle has a writable copy of the data then it will be duplicated, otherwise this handle will claim the writer status for the data.

Parameters

[in] src the handle to the attribute to copy

Returns: Status code

Status Codes:

MS::kSuccess The method was successful
MS::kFailure The method failed

Examples:: splatDeformer/splatDeformer.cpp, and sseDeformer/sseDeformer.cpp.

void setClean ( )

Marks the data that is represented by this handle as being clean.

This should be done after recalculating the data from the inputs. MDataHandle::setClean() does not clean the children of array attributes. For example, it cannot clean myNode.output[0].outputAttrX. One workaround is to call MDataBlock::setClean() to clean the datablock using the plug of outputAttrX.

Examples:: anisotropicShader/anisotropicShader.cpp, apiDirectionalLightShape/apiDirectionalLightShape.cpp, apiMeshShape/apiMeshShape.cpp, backfillShader/backfillShader.cpp, blindDataShader/blindDataShader.cpp, buildRotationNode/buildRotationNode.cpp, cellShader/cellShader.cpp, cgFx/cgfxShaderNode.cpp, checkerShader/checkerShader.cpp, clearcoat.cpp, compositingShader/compositingShader.cpp, constraintEvaluator/constraintEvaluator.cpp, contrastShader/contrastShader.cpp, cvColorShader/cvColorShader.cpp, displacementShader/displacementShader.cpp, dx11Shader/dx11ConeAngleToHotspotConverter.cpp, fileTexture/fileTexture.cpp, flameShader/flameShader.cpp, gammaShader/gammaShader.cpp, genericAttributeNode/genericAttributeNode.cpp, geomShader/geomShader.cpp, hwDecalBumpShader_NV20/hwDecalBumpShader_NV20.cpp, hwPhongShader/hwPhongShader.cpp, hwReflectBumpShader_NV20/hwReflectBumpShader_NV20.cpp, hwRefractReflectShader_NV20/hwRefractReflectShader_NV20.cpp, hwToonShader_NV20/hwToonShader_NV20.cpp, hwUnlitShader/hwUnlitShader.cpp, interpShader/interpShader.cpp, lambertShader/lambertShader.cpp, lavaShader/lavaShader.cpp, lightShader/lightShader.cpp, manipOverride/rockingTransform2.cpp, meshOpCmd/meshOpNode.cpp, MetadataSample/tweakMetadataNode.cpp, mixtureShader/mixtureShader.cpp, noiseShader/noiseShader.cpp, onbShader/onbShader.cpp, phongShader/phongShader.cpp, renderAccessNode/renderAccessNode.cpp, rockingTransform/rockingTransform.cpp, rockingTransformCheck/rockingTransform.cpp, shadowMatteShader/shadowMatteShader.cpp, shiftNode/shiftNode.cpp, simpleNoiseShader/simpleNoiseShader.cpp, slopeShader/slopeShaderNode.cpp, solidCheckerShader/solidCheckerShader.cpp, splitUVCmd/splitUVNode.cpp, volumeShader/volumeShader.cpp, and vp2BlinnShader/vp2BlinnShader.cpp.

bool & asBool ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as a boolean

Examples:: anisotropicShader/anisotropicShader.cpp, apiMeshShape/apiMeshShape.cpp, backfillShader/backfillShader.cpp, cgFx/cgfxShaderNode.cpp, cgFx/cgfxVector.cpp, cvColorShader/cvColorShader.cpp, gameInputDevice/gameInputDevice.cpp, hwColorPerVertexShader/hwColorPerVertexShader.cpp, lambertShader/lambertShader.cpp, lightShader/lightShader.cpp, motionPathNode/motionPathNode.cpp, multiPlugInfoCmd/multiPlugInfoCmd.cpp, onbShader/onbShader.cpp, ownerEmitter/ownerEmitter.h, phongShader/phongShader.cpp, pnTriangles/pnTrianglesNode.cpp, pointOnMeshInfo/pointOnMeshInfoNode.cpp, pointOnSubdNode/pointOnSubdNode.cpp, shadowMatteShader/shadowMatteShader.cpp, shiftNode/shiftNode.cpp, simpleEmitter/simpleEmitter.h, splatDeformer/splatDeformer.cpp, sseDeformer/sseDeformer.cpp, sweptEmitter/sweptEmitter.h, torusField/torusField.h, and volumeShader/volumeShader.cpp.

char & asChar ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as a char

unsigned char & asUChar ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an unsigned char

short & asShort ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as a short integer

Examples:: AbcImport/AlembicNode.cpp, apiMeshShape/apiMeshCreator.cpp, buildRotationNode/buildRotationNode.cpp, dx11Shader/dx11Shader.cpp, glslShader/GLSLShader.cpp, meshOpCmd/meshOpNode.cpp, MetadataSample/tweakMetadataNode.cpp, motionPathNode/motionPathNode.cpp, multiPlugInfoCmd/multiPlugInfoCmd.cpp, phongShader/phongShader.cpp, quadricShape/quadricShape.cpp, simpleNoiseShader/simpleNoiseShader.cpp, and splitUVCmd/splitUVNode.cpp.

int & asLong ( ) const

This method is obsolete.

Deprecated:: Use MDataHandle::asInt instead.

Returns: The handle's data as a int integer

Examples:: blindDataShader/blindDataMesh.cpp, cvColorShader/cvColorShader.cpp, lavaShader/lavaShader.cpp, multiCurveNode/multiCurveNode.cpp, pointOnMeshInfo/pointOnMeshInfoNode.cpp, pointOnSubdNode/pointOnSubdNode.cpp, and splatDeformer/splatDeformer.cpp.

int & asInt ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as a int integer

Examples:: affectsNode/affectsNode.cpp, genericAttributeNode/genericAttributeNode.cpp, hwColorPerVertexShader/hwColorPerVertexShader.cpp, hwPhongShader/hwPhongShader.cpp, multiPlugInfoCmd/multiPlugInfoCmd.cpp, particleAttrNode/particleAttrNode.cpp, pnTriangles/pnTrianglesNode.cpp, selectClosestPointLocator/selectClosestPointLocator.cpp, and simpleEvaluationDraw/simpleEvaluationDraw.cpp.

MInt64 & asInt64 ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as a 64-bit integer

void *& asAddr ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an address

Examples:: cvColorShader/cvColorShader.cpp, lightShader/lightShader.cpp, and phongShader/phongShader.cpp.

float & asFloat ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as a float

Examples:: anisotropicShader/anisotropicShader.cpp, backfillShader/backfillShader.cpp, basicBlendShape/basicBlendShape.cpp, brickShader/brickShader.cpp, cellShader/cellShader.cpp, checkerShader/checkerShader.cpp, circleNode/circleNode.cpp, clearcoat.cpp, compositingShader/compositingShader.cpp, cvColorShader/cvColorShader.cpp, depthShader/depthShader.cpp, displacementShader/displacementShader.cpp, dx11Shader/dx11Shader.cpp, fileTexture/fileTexture.cpp, flameShader/flameShader.cpp, hwColorPerVertexShader/hwColorPerVertexShader.cpp, hwPhongShader/hwPhongShader.cpp, hwToonShader_NV20/hwToonShader_NV20.cpp, interpShader/interpShader.cpp, jitterNode/jitterNode.cpp, lambertShader/lambertShader.cpp, latticeNoise/latticeNoiseNode.cpp, lavaShader/lavaShader.cpp, lightShader/lightShader.cpp, multiPlugInfoCmd/multiPlugInfoCmd.cpp, noiseShader/noiseShader.cpp, offsetNode/offsetNode.cpp, onbShader/onbShader.cpp, phongShader/phongShader.cpp, renderAccessNode/renderAccessNode.cpp, shadowMatteShader/shadowMatteShader.cpp, shiftNode/shiftNode.cpp, simpleEvaluationNode/simpleEvaluationNode.cpp, simpleNoiseShader/simpleNoiseShader.cpp, sineNode/sineNode.cpp, slopeShader/slopeShaderNode.cpp, solidCheckerShader/solidCheckerShader.cpp, sseDeformer/sseDeformer.cpp, volumeShader/volumeShader.cpp, and yTwistNode/yTwistNode.cpp.

double & asDouble ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as a double

Examples:: AbcImport/AlembicNode.cpp, apiMeshShape/apiMeshCreator.cpp, apiMeshShape/apiMeshShape.cpp, basicSkinCluster/basicSkinCluster.cpp, closestPointOnCurve/closestPointOnCurveNode.cpp, customImagePlane/customImagePlane.cpp, dynExprField/dynExprField.cpp, geometrySurfaceConstraint/geometrySurfaceConstraint.cpp, manipOverride/rockingTransform2.cpp, motionPathNode/motionPathNode.cpp, multiCurveNode/multiCurveNode.cpp, multiPlugInfoCmd/multiPlugInfoCmd.cpp, ownerEmitter/ownerEmitter.h, particleAttrNode/particleAttrNode.cpp, pointOnMeshInfo/pointOnMeshInfoNode.cpp, pointOnSubdNode/pointOnSubdNode.cpp, quadricShape/quadricShape.cpp, rockingTransform/rockingTransform.cpp, rockingTransformCheck/rockingTransform.cpp, selectClosestPointLocator/selectClosestPointLocator.cpp, simpleEmitter/simpleEmitter.h, simpleSpring/simpleSpring.h, stringFormatNode/stringFormatNode.cpp, sweptEmitter/sweptEmitter.h, torusField/torusField.h, transCircleNode/transCircleNode.cpp, and yTwistNode/yTwistNode.cpp.

MDistance asDistance ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an Distance

MAngle asAngle ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an MAngle

Examples:: dx11Shader/dx11ConeAngleToHotspotConverter.cpp.

MTime asTime ( ) const

Returns the data represented by this handle in the data block.

Even though this method does not return a reference to an MTime, modifications to the MTime instance will update the contents of the handle in the data block. The method MDataHandle::setClean should be called after the data block has been modified.

Returns: The handle's data as an MTime

Examples:: AbcImport/AlembicNode.cpp, animCubeNode/animCubeNode.cpp, latticeNoise/latticeNoiseNode.cpp, ownerEmitter/ownerEmitter.h, simpleEmitter/simpleEmitter.h, simpleEvaluationDraw/simpleEvaluationDraw.cpp, simpleEvaluationNode/simpleEvaluationNode.cpp, sweptEmitter/sweptEmitter.h, testNobjectNode/testNobjectNode.cpp, testNsolverNode/testNsolverNode.cpp, and testNucleusNode/testNucleusNode.cpp.

short2 & asShort2 ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an array of two short integers

long2 & asLong2 ( ) const

This method is obsolete.

Deprecated:: Use MDataHandle::asInt2 instead.

Returns: The handle's data as an array of two int integers

int2 & asInt2 ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an array of two int integers

float2 & asFloat2 ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an array of two floats

Examples:: brickShader/brickShader.cpp, checkerShader/checkerShader.cpp, fileTexture/fileTexture.cpp, shiftNode/shiftNode.cpp, and simpleNoiseShader/simpleNoiseShader.cpp.

double2 & asDouble2 ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an array of two doubles

short3 & asShort3 ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an array of three short integers

long3 & asLong3 ( ) const

This method is obsolete.

Deprecated:: Use MDataHandle::asInt3 instead.

Returns: The handle's data as an array of three int integers

int3 & asInt3 ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an array of three int integers

float3 & asFloat3 ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an array of three float values

Examples:: cellShader/cellShader.cpp, flameShader/flameShader.cpp, hwColorPerVertexShader/hwColorPerVertexShader.cpp, hwPhongShader/hwPhongShader.cpp, lavaShader/lavaShader.cpp, noiseShader/noiseShader.cpp, and solidCheckerShader/solidCheckerShader.cpp.

double3 & asDouble3 ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as an array array of three doubles

Examples:: apiMeshShape/apiMeshShape.cpp, cgFx/cgfxVector.cpp, gameInputDevice/gameInputDevice.cpp, ownerEmitter/ownerEmitter.h, randomizerDevice/randomizerDevice.cpp, rockingTransformCheck/rockingTransformCheck.cpp, simpleEmitter/simpleEmitter.h, sweptEmitter/sweptEmitter.h, transCircleNode/transCircleNode.cpp, and udpDevice/udpDevice.cpp.

MVector & asVector ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as a vector

Examples:: buildRotationNode/buildRotationNode.cpp.

MFloatVector & asFloatVector ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as a vector

Examples:: anisotropicShader/anisotropicShader.cpp, apiDirectionalLightShape/apiDirectionalLightShape.cpp, backfillShader/backfillShader.cpp, blindDataShader/blindDataShader.cpp, brickShader/brickShader.cpp, cellShader/cellShader.cpp, cgFx/cgfxShaderNode.cpp, checkerShader/checkerShader.cpp, clearcoat.cpp, compositingShader/compositingShader.cpp, contrastShader/contrastShader.cpp, cvColorShader/cvColorShader.cpp, depthShader/depthShader.cpp, displacementShader/displacementShader.cpp, dynExprField/dynExprField.cpp, fileTexture/fileTexture.cpp, flameShader/flameShader.cpp, gammaShader/gammaShader.cpp, geomShader/geomShader.cpp, hwColorPerVertexShader/hwColorPerVertexShader.cpp, hwDecalBumpShader_NV20/hwDecalBumpShader_NV20.cpp, hwPhongShader/hwPhongShader.cpp, hwReflectBumpShader_NV20/hwReflectBumpShader_NV20.cpp, hwRefractReflectShader_NV20/hwRefractReflectShader_NV20.cpp, hwToonShader_NV20/hwToonShader_NV20.cpp, hwUnlitShader/hwUnlitShader.cpp, interpShader/interpShader.cpp, lambertShader/lambertShader.cpp, lavaShader/lavaShader.cpp, lightShader/lightShader.cpp, mixtureShader/mixtureShader.cpp, noiseShader/noiseShader.cpp, onbShader/onbShader.cpp, phongShader/phongShader.cpp, shadowMatteShader/shadowMatteShader.cpp, shiftNode/shiftNode.cpp, simpleNoiseShader/simpleNoiseShader.cpp, slopeShader/slopeShaderNode.cpp, solidCheckerShader/solidCheckerShader.cpp, volumeShader/volumeShader.cpp, and vp2BlinnShader/vp2BlinnShader.cpp.

MMatrix & asMatrix ( ) const

Returns the data represented by this handle in the data block.

This method is only valid for attributes created using the MFnMatrixAttribute function set.

Returns: The handle's data as a matrix

Examples:: AbcBullet/MayaTransformCollectionWriter.cpp, offsetNode/offsetNode.cpp, ownerEmitter/ownerEmitter.cpp, simpleEmitter/simpleEmitter.cpp, and torusField/torusField.cpp.

MFloatMatrix & asFloatMatrix ( ) const

Returns the data represented by this handle in the data block.

This method is only valid for attributes created using the MFnMatrixAttribute function set.

Returns: The handle's data as a matrix of floats

Examples:: anisotropicShader/anisotropicShader.cpp, cellShader/cellShader.cpp, flameShader/flameShader.cpp, lavaShader/lavaShader.cpp, noiseShader/noiseShader.cpp, slopeShader/slopeShaderNode.cpp, and solidCheckerShader/solidCheckerShader.cpp.

MString & asString ( ) const

Returns the data represented by this handle in the data block.

Returns: The handle's data as a string

Examples:: AbcImport/AlembicNode.cpp, cgFx/cgfxShaderNode.cpp, dx11Shader/dx11Shader.cpp, fileTexture/fileTexture.cpp, glslShader/GLSLShader.cpp, gpuCache/gpuCacheShapeNode.cpp, hlslShader/hlslShader.cpp, hwColorPerVertexShader/hwColorPerVertexShader.cpp, sceneAssembly/assemblyReference.cpp, and stringFormatNode/stringFormatNode.cpp.

MObject asNurbsCurve ( ) const

Returns the data represented by this handle in the data block.

The object returned by this call may be used directly with the nurbs curve function set and iterator. Even though this method does not return a reference to an MObject, modifications to the MObject instance will update the contents of the handle in the data block. The method MDataHandle::setClean should be called after the data block has been modified.

The curve returned by this method will be in local space even if the connection is supplying world space geometry. This occurs mostly for efficiency reasons. In the case of a world space geometry connection, the MObject returned by this method will also contain the world space transformation matrix. This means that world space operations may be performed on this object using the nurbs curve function set and iterator.

It is possible to get the matrix that defines the local to world transformation for this geometry using the MDataHandle::geometryTransformMatrix() method.

Returns: The handle's data as a nurbs curve

Examples:: closestPointOnCurve/closestPointOnCurveNode.cpp, fullLoftNode/fullLoftNode.cpp, and simpleLoftNode/simpleLoftNode.cpp.

MObject asNurbsSurface ( ) const

Returns the data represented by this handle in the data block.

The object returned by this call may be used directly with the nurbs surface function set and iterator. Even though this method does not return a reference to an MObject, modifications to the MObject instance will update the contents of the handle in the data block. The method MDataHandle::setClean should be called after the data block has been modified.

The surface returned by this method will be in local space even if the connection is supplying world space geometry. This occurs mostly for efficiency reasons. In the case of a world space geometry connection, the MObject returned by this method will also contain the world space transformation matrix. This means that world space operations may be performed on this object using the nurbs surface function set and iterator.

It is possible to get the matrix that defines the local to world transformation for this geometry using the MDataHandle::geometryTransformMatrix() method.

Returns: The handle's data as a nurbs surface

Examples:: cvColorNode/cvColorNode.cpp.

MObject asMesh ( ) const

Returns the data represented by this handle in the data block.

The object returned by this call may be used directly with the mesh function set and iterators. Even though this method does not return a reference to an MObject, modifications to the MObject instance will update the contents of the handle in the data block. The method MDataHandle::setClean should be called after the data block has been modified.

The surface returned by this method will be in local space even if the connection is supplying world space geometry. This occurs mostly for efficiency reasons. In the case of a world space geometry connection, the MObject returned by this method will also contain the world space transformation matrix. This means that world space operations may be performed on this object using the mesh function set and iterators.

It is possible to get the matrix that defines the local to world transformation for this geometry using the MDataHandle::geometryTransformMatrix() method.

Returns: The handle's data as a mesh (polygonal surface)

Examples:: geometrySurfaceConstraint/geometrySurfaceConstraint.cpp, meshOpCmd/meshOpNode.cpp, MetadataSample/tweakMetadataNode.cpp, pointOnMeshInfo/pointOnMeshInfoNode.cpp, shellNode/shellNode.cpp, splatDeformer/splatDeformer.cpp, splitUVCmd/splitUVNode.cpp, sseDeformer/sseDeformer.cpp, testNobjectNode/testNobjectNode.cpp, and testNpassiveNode/testNpassiveNode.cpp.

MObject asSubdSurface ( ) const

Returns the data represented by this handle in the data block.

The object returned by this call may be used directly with the subdivision surface function set and iterator. Even though this method does not return a reference to an MObject, modifications to the MObject instance will update the contents of the handle in the data block. The method MDataHandle::setClean should be called after the data block has been modified.

The subdivision surface returned by this method will be in local space even if the connection is supplying world space geometry. This occurs mostly for efficiency reasons. In the case of a world space geometry connection, the MObject returned by this method will also contain the world space transformation matrix. This means that world space operations may be performed on this object using the subdivision surface function set and iterator.

It is possible to get the matrix that defines the local to world transformation for this geometry using the MDataHandle::geometryTransformMatrix() method.

Returns: The handle's data as a subdivision surface

Examples:: pointOnSubdNode/pointOnSubdNode.cpp.

MObject asNurbsCurveTransformed ( ) const

Returns the data represented by this handle in the data block.

The object returned by this call may be used directly with the nurbs curve function set (MFnNurbsCurve) or the nurbs curve CV iterator (MItCurveCV).

If the incoming curve comes with world space transformation data, then it will be applied to the data that is returned. In other words, the curve that is returned will be the curve as it exists in world space.

The curve that is returned from this method should not be modified. This method is only provided to make it easier to take world space geometry as input.

Returns: The handle's data as a nurbs curve

Examples:: arcLenNode/arcLenNode.cpp, and multiCurveNode/multiCurveNode.cpp.

MObject asNurbsSurfaceTransformed ( ) const

Returns the data represented by this handle in the data block.

The object returned by this call may be used directly with the nurbs surface function set (MFnNurbsSurface) or the nurbs surface CV iterator (MItSurfaceCV).

If the incoming surface comes with world space transformation data, then it will be applied to the data that is returned. In other words, the surface that is returned will be the surface as it exists in world space.

The surface that is returned from this method should not be modified. This method is only provided to make it easier to take world space geometry as input.

Returns: The handle's data as a nurbs surface

MObject asMeshTransformed ( ) const

Returns the data represented by this handle in the data block.

The object returned by this call may be used directly with the mesh function set (MFnMesh) or any of the mesh iterators.

If the incoming mesh comes with world space transformation data, then it will be applied to the data that is returned. In other words, the mesh that is returned will be the mesh as it exists in world space.

The mesh that is returned from this method should not be modified. This method is only provided to make it easier to take world space geometry as input.

Returns: The handle's data as a mesh

Examples:: splatDeformer/splatDeformer.cpp.

MObject asSubdSurfaceTransformed ( ) const

Returns the data represented by this handle in the data block.

The object returned by this call may be used directly with the subdivision surface function set (MFnSubdSurface) or the subdivision surface iterators (MItSubdVertex, MItSubdFace, MItSubdEdge).

If the incoming surface comes with world space transformation data, then it will be applied to the data that is returned. In other words, the surface that is returned will be the surface as it exists in world space.

The surface that is returned from this method should not be modified. This method is only provided to make it easier to take world space geometry as input.

Returns: The handle's data as a subdivision surface

const MMatrix & geometryTransformMatrix ( ) const

This method returns a reference to the local-to-world transformation matrix that can accompany a geometry data object.

Only use this method on handles to geometry data (curves, surfaces, and meshes).

If no local-to-world transformation information has been provided then this will be an identity matrix.

Returns: The handle's transform data as a 4x4 matrix

MPxData * asPluginData ( ) const

Returns the data represented by this handle in the data block.

The object is returned as plugin data. This should be used to access data types defined by plugins.

Returns: The handle's data

Examples:: apiMeshShape/apiMeshShape.cpp.

void set ( bool val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setBool method instead.

Parameters

[in] val the new value

Examples:: AbcImport/AlembicNode.cpp, AbcImport/NodeIteratorVisitorHelper.cpp, affectsNode/affectsNode.cpp, animCubeNode/animCubeNode.cpp, apiMeshShape/apiMeshCreator.cpp, apiMeshShape/apiMeshShape.cpp, arcLenNode/arcLenNode.cpp, blindDataShader/blindDataMesh.cpp, buildRotationNode/buildRotationNode.cpp, cgFx/cgfxShaderNode.cpp, cgFx/cgfxVector.cpp, circleNode/circleNode.cpp, closestPointOnCurve/closestPointOnCurveNode.cpp, customImagePlane/customImagePlane.cpp, cvColorNode/cvColorNode.cpp, dx11Shader/dx11ConeAngleToHotspotConverter.cpp, dx11Shader/dx11Shader.cpp, dynExprField/dynExprField.cpp, fullLoftNode/fullLoftNode.cpp, genericAttributeNode/genericAttributeNode.cpp, glslShader/GLSLShader.cpp, hlslShader/hlslShader.cpp, hwColorPerVertexShader/hwColorPerVertexShader.cpp, hwPhongShader/hwPhongShader.cpp, jitterNode/jitterNode.cpp, latticeNoise/latticeNoiseNode.cpp, manipOverride/rockingTransform2.cpp, meshOpCmd/meshOpNode.cpp, MetadataSample/tweakMetadataNode.cpp, motionPathNode/motionPathNode.cpp, multiCurveNode/multiCurveNode.cpp, ownerEmitter/ownerEmitter.cpp, pnTriangles/pnTrianglesNode.cpp, pointOnMeshInfo/pointOnMeshInfoNode.cpp, pointOnSubdNode/pointOnSubdNode.cpp, quadricShape/quadricShape.cpp, rockingTransform/rockingTransform.cpp, rockingTransformCheck/rockingTransform.cpp, rockingTransformCheck/rockingTransformCheck.cpp, sceneAssembly/assemblyReference.cpp, shellNode/shellNode.cpp, shiftNode/shiftNode.cpp, simpleEmitter/simpleEmitter.cpp, simpleEvaluationNode/simpleEvaluationNode.cpp, simpleLoftNode/simpleLoftNode.cpp, sineNode/sineNode.cpp, splitUVCmd/splitUVNode.cpp, stringFormatNode/stringFormatNode.cpp, sweptEmitter/sweptEmitter.cpp, testNobjectNode/testNobjectNode.cpp, testNpassiveNode/testNpassiveNode.cpp, torusField/torusField.cpp, transCircleNode/transCircleNode.cpp, and weightListNode/weightListNode.cpp.

void set ( char val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setChar method instead.

Parameters

[in] val the new value

void set ( short val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setShort method instead.

Parameters

[in] val the new value

void set ( int val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setInt method instead.

Parameters

[in] val the new value

void set ( MInt64 val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setInt64 method instead.

Parameters

[in] val the new value

void set ( float val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setFloat method instead.

Parameters

[in] val the new value

void set ( double val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setDouble method instead.

Parameters

[in] val the new value

void set ( const MMatrix & val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block. This method is only valid for attributes created using the MFnMatrixAttribute function set.

Python Notes

This method is not available from Python. See setMMatrix method instead.

Parameters

[in] val the new value

void set ( const MFloatMatrix & val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setMFloatMatrix method instead.

Parameters

[in] val the new value

void set ( const MVector & val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setMVector method instead.

Parameters

[in] val the new value

void set ( const MFloatVector & val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setMFloatVector method instead.

Parameters

[in] val the new value

void set ( const MDistance & val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setMDistance method instead.

Parameters

[in] val the new value

void set ( const MAngle & val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setMAngle method instead.

Parameters

[in] val the new value

void set ( const MTime & val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setMTime method instead.

Parameters

[in] val the new value

void set	(	short	val1,
		short	val2
	)

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See set2Short method instead.

Parameters

[in]	val1	the first value in the two element array
[in]	val2	the second value in the two element array

void set	(	int	val1,
		int	val2
	)

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See set2Int method instead.

Parameters

[in]	val1	the first value in the two element array
[in]	val2	the second value in the two element array

void set	(	float	val1,
		float	val2
	)

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See set2Float method instead.

Parameters

[in]	val1	the first value in the two element array
[in]	val2	the second value in the two element array

void set	(	double	val1,
		double	val2
	)

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See set2Double method instead.

Parameters

[in]	val1	the first value in the two element array
[in]	val2	the second value in the two element array

void set	(	short	val1,
		short	val2,
		short	val3
	)

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See set3Short method instead.

Parameters

[in]	val1	the first value in the three element array
[in]	val2	the second value in the three element array
[in]	val3	the third value in the three element array

void set	(	int	val1,
		int	val2,
		int	val3
	)

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See set3Int method instead.

Parameters

[in]	val1	the first value in the three element array
[in]	val2	the second value in the three element array
[in]	val3	the third value in the three element array

void set	(	float	val1,
		float	val2,
		float	val3
	)

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See set3Float method instead.

Parameters

[in]	val1	the first value in the three element array
[in]	val2	the second value in the three element array
[in]	val3	the third value in the three element array

void set	(	double	val1,
		double	val2,
		double	val3
	)

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See set3Double method instead.

Parameters

[in]	val1	the first value in the three element array
[in]	val2	the second value in the three element array
[in]	val3	the third value in the three element array

void set ( const MString & val )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block.

Python Notes

This method is not available from Python. See setString method instead.

Parameters

[in] val the new string value

MStatus set ( const MObject & data )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block. This method assumes that the MObject is a dependency graph data object. These objects can be created using the appropriate MFn..Data function set. Note that this method cannot be used to copy compound or multi attributes from one handle to another via the construct outputHandle.set (inputHandle.data()). To copy these user defined attributes, the method MDataHandle::copy must be used.

Python Notes

This method is not available from Python. See setMObject method instead.

Parameters

[in] data the data object

Returns: Status code

Status Codes:

MS::kSuccess The method was successful
MS::kInvalidParameter Invalid object passed in

MStatus set ( MPxData * data )

No script support.

This method is not available in Python.

Set the data that this handle represents in the data block. This method takes a pointer to a user defined data object. The data block will become the new owner of the data object that you pass in. Do not delete it.

Python Notes

This method is not available from Python. See setMPxData method instead.

Parameters

[in] data the data object

Returns: Status code

Status Codes:

MS::kSuccess The method was successful
MS::kInvalidParameter Invalid data

void setBool ( bool val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setChar ( char val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setShort ( short val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setInt ( int val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setInt64 ( MInt64 val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setFloat ( float val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setDouble ( double val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setMMatrix ( const MMatrix & val )

Set the data that this handle represents in the data block.

This method is only valid for attributes created using the MFnMatrixAttribute function set.

Parameters

[in] val the new value

void setMFloatMatrix ( const MFloatMatrix & val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setMVector ( const MVector & val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setMFloatVector ( const MFloatVector & val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setMDistance ( const MDistance & val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setMAngle ( const MAngle & val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void setMTime ( const MTime & val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new value

void set2Short	(	short	val1,
		short	val2
	)

Set the data that this handle represents in the data block.

Parameters

[in]	val1	the first value in the two element array
[in]	val2	the second value in the two element array

void set2Int	(	int	val1,
		int	val2
	)

Set the data that this handle represents in the data block.

Parameters

[in]	val1	the first value in the two element array
[in]	val2	the second value in the two element array

void set2Float	(	float	val1,
		float	val2
	)

Set the data that this handle represents in the data block.

Parameters

[in]	val1	the first value in the two element array
[in]	val2	the second value in the two element array

void set2Double	(	double	val1,
		double	val2
	)

Set the data that this handle represents in the data block.

Parameters

[in]	val1	the first value in the two element array
[in]	val2	the second value in the two element array

void set3Short	(	short	val1,
		short	val2,
		short	val3
	)

Set the data that this handle represents in the data block.

Parameters

[in]	val1	the first value in the three element array
[in]	val2	the second value in the three element array
[in]	val3	the third value in the three element array

void set3Int	(	int	val1,
		int	val2,
		int	val3
	)

Set the data that this handle represents in the data block.

Parameters

[in]	val1	the first value in the three element array
[in]	val2	the second value in the three element array
[in]	val3	the third value in the three element array

void set3Float	(	float	val1,
		float	val2,
		float	val3
	)

Set the data that this handle represents in the data block.

Parameters

[in]	val1	the first value in the three element array
[in]	val2	the second value in the three element array
[in]	val3	the third value in the three element array

void set3Double	(	double	val1,
		double	val2,
		double	val3
	)

Set the data that this handle represents in the data block.

Parameters

[in]	val1	the first value in the three element array
[in]	val2	the second value in the three element array
[in]	val3	the third value in the three element array

Examples:: constraintEvaluator/constraintEvaluator.cpp.

void setString ( const MString & val )

Set the data that this handle represents in the data block.

Parameters

[in] val the new string value

Examples:: AbcImport/NodeIteratorVisitorHelper.cpp, and gpuCache/gpuCacheShapeNode.cpp.

MStatus setMObject ( const MObject & data )

Set the data that this handle represents in the data block.

This method assumes that the MObject is a dependency graph data object. These objects can be created using the appropriate MFn..Data function set. Note that this method cannot be used to copy compound or multi attributes from one handle to another via the construct outputHandle.set (inputHandle.data()). To copy these user defined attributes, the method MDataHandle::copy must be used.

Parameters

[in] data the data object

Returns: Status code

Status Codes:

MS::kSuccess The method was successful
MS::kInvalidParameter Invalid object passed in

Examples:: AbcImport/NodeIteratorVisitorHelper.cpp, geometrySurfaceConstraint/geometrySurfaceConstraint.cpp, splatDeformer/splatDeformer.cpp, and sseDeformer/sseDeformer.cpp.

MStatus setMPxData ( MPxData * data )

Set the data that this handle represents in the data block.

This method takes a pointer to a user defined data object. The data block will become the new owner of the data object that you pass in. Do not delete it.

Parameters

[in] data the data object

Returns: Status code

Status Codes:

MS::kSuccess The method was successful
MS::kInvalidParameter Invalid data

bool asGenericBool ( ) const

Returns the generic data represented by this handle in the data block.

Returns: The generic handle's data as a bool

unsigned char asGenericChar ( ) const

Returns the generic data represented by this handle in the data block.

Returns: The generic handle's data as a char

double asGenericDouble ( ) const

Returns the generic data represented by this handle in the data block.

Returns: The generic handle's data as a double

float asGenericFloat ( ) const

Returns the generic data represented by this handle in the data block.

Returns: The generic handle's data as a float

short asGenericShort ( ) const

Returns the generic data represented by this handle in the data block.

Returns: The generic handle's data as a short

int asGenericInt ( ) const

Returns the generic data represented by this handle in the data block.

Returns: The generic handle's data as a int

MInt64 asGenericInt64 ( ) const

Returns the generic data represented by this handle in the data block.

Returns: The generic handle's data as a 64-bit int

void setGenericBool	(	bool	value,
		bool	force
	)

Set the data that this handle represents in the data block.

Parameters

[in]	value	the new bool value
[in]	force	force the new type of the attribute to be bool

Examples:: AbcImport/AlembicNode.cpp, AbcImport/NodeIteratorVisitorHelper.cpp, and genericAttributeNode/genericAttributeNode.cpp.

void setGenericChar	(	unsigned char	value,
		bool	force
	)

Set the data that this handle represents in the data block.

Parameters

[in]	value	the new char value
[in]	force	force the new type of the attribute to be char

Examples:: AbcImport/NodeIteratorVisitorHelper.cpp, and genericAttributeNode/genericAttributeNode.cpp.

void setGenericDouble	(	double	value,
		bool	force
	)

Set the data that this handle represents in the data block.

Parameters

[in]	value	the new double value
[in]	force	force the new type of the attribute to be double

Examples:: AbcImport/NodeIteratorVisitorHelper.cpp, and genericAttributeNode/genericAttributeNode.cpp.

void setGenericFloat	(	float	value,
		bool	force
	)

Set the data that this handle represents in the data block.

Parameters

[in]	value	the new float value
[in]	force	force the new type of the attribute to be float

Examples:: AbcImport/NodeIteratorVisitorHelper.cpp, and genericAttributeNode/genericAttributeNode.cpp.

void setGenericShort	(	short	value,
		bool	force
	)

Set the data that this handle represents in the data block.

Parameters

[in]	value	the new short value
[in]	force	force the new type of the attribute to be short

Examples:: AbcImport/NodeIteratorVisitorHelper.cpp, and genericAttributeNode/genericAttributeNode.cpp.

void setGenericInt	(	int	value,
		bool	force
	)

Set the data that this handle represents in the data block.

Parameters

[in]	value	the new int value
[in]	force	force the new type of the attribute to be int

Examples:: AbcImport/NodeIteratorVisitorHelper.cpp, and genericAttributeNode/genericAttributeNode.cpp.

void setGenericInt64	(	MInt64	value,
		bool	force
	)

Set the data that this handle represents in the data block.

Parameters

[in]	value	the new 64-bit int value
[in]	force	force the new type of the attribute to be 64-bit int

MDataHandle child ( const MPlug & plug )

Get a handle to a child of this handle.

This is used if you have a handle to a compound attribute.

Parameters

[in] plug the plug of the child

Returns: The data handle for the child

Examples:: anisotropicShader/anisotropicShader.cpp, backfillShader/backfillShader.cpp, basicBlendShape/basicBlendShape.cpp, basicSkinCluster/basicSkinCluster.cpp, dynExprField/dynExprField.cpp, geometrySurfaceConstraint/geometrySurfaceConstraint.cpp, lambertShader/lambertShader.cpp, lightShader/lightShader.cpp, offsetNode/offsetNode.cpp, onbShader/onbShader.cpp, phongShader/phongShader.cpp, shadowMatteShader/shadowMatteShader.cpp, splatDeformer/splatDeformer.cpp, sseDeformer/sseDeformer.cpp, torusField/torusField.cpp, and weightListNode/weightListNode.cpp.

MDataHandle child ( const MObject & attribute )

Get a handle to a child of this handle.

This is used if you have a handle to a compound attribute.

Parameters

[in] attribute the attribute of the child

Returns: The data handle for the child

MDataHandle & operator= ( const MDataHandle & other )

inline

Assignment operator.

Parameters

[in] other Data handle to copy from.

const char * className ( )

static

Returns the name of this class.

Returns: Name of this class.

The documentation for this class was generated from the following files:

MDataHandle.h
MDataHandle.cpp

MDataHandle Class Reference

Class Description

Public Member Functions

Static Public Member Functions

Friends

Constructor & Destructor Documentation

Member Function Documentation