Solver message 104009

Message text

** WARNING 104009 ** The residual strain shrinkage model coefficients for the currently selected material are not compatible with the current software release and so the analysis results may be unreliable. Select a different shrinkage model and run the analysis again.

Explanation

The residual strain shrinkage model coefficients for the currently selected material were generated for a different release of the software. The results of the Warp analysis may be unreliable.

Resolution

• Select a different material.
• Select a different shrinkage model.
• Contact Autodesk Moldflow Plastics Labs for shrinkage data for the current material.