Define appropriate leads and links

The cutting moves of the toolpath created in Create the Blisk area clearance toolpath are correct, but the links have to be defined. One of possible solutions is:

1. Click Home tab > Toolpath Setup panel > Toolpath Connections to display the Toolpath connections dialog and click the Lead ins tab.
   1. In the 1st Choice list select Extended Move.
   2. Enter a Length of 10.
   3. Click Copy to Lead Out to copy these values to the Lead Outs tab.
2. Click the Links tab.
   1. Select a 1st choice of Circular arc.
   2. Click Apply constraints.
   3. Select Distance from the first drop-down list.
   4. Select from the second drop-down list.
   5. Enter 250 to be the maximum link distance.
   6. Select a 2nd choice of Skim.
3. Click the Moves and clearances tab.
   1. Select an Along of Tool Axis.
   2. Select Automatically Extend.
   3. Enter a Maximum length of 250.
4. Click Apply to apply the changes to the active toolpath.