Pressure Networks Command Reference

You can use commands to quickly access pressure network functionality. The following table lists the pressure network Autodesk Civil 3D commands and briefly describes their functionality.

Command	Description
AddAncillary	Adds an ancillary to a pressure network in plan view
AddAppurtTable	Creates a table that contains data about ancillaries from one or more pressure networks
AddAncillaryInPV	Adds an ancillary to a part-based pressure network in profile view
AddBranchFitting	Adds an appropriate branch fitting at the intersection of two pipe runs
AddFitting	Adds a fitting to a pressure network in plan view
AddFittingInPV	Adds a vertical bend to a part-based pressure network in profile view
AddFittingTable	Creates a table that contains data about fittings from one or more pressure networks
AddPipeRun	Creates an additional pipe run for a pressure network
AddPipeRunBend	Adds a bend and a point of intersection to the selected pipe run
AddPipeRunVerticalBend	Adds a vertical point of intersection and a bend to a pipe run in profile view
AddPipeRunFromObj	Creates a pipe run from an object
AddPressureNetworkLabels	Creates pressure network labels using the Add Labels dialog box
AddPressurePartPlanLabel	Creates a label for a pressure network part displayed in plan view
AddPressurePartProfLabel	Creates a label for a pressure network part displayed in profile view
AddPressurePartSecLabel	Creates a label for a pressure network part displayed in section view
AddPressurePartsToProf	Adds selected pressure network parts to a profile view
AddPressurePipeInPV	Adds a pressure pipe to a part-based pressure network in profile view
AddPressurePipeTable	Creates a table that contains data about pressure pipes from one or more pressure networks
AddPressurePlanLabels	Creates labels for a pressure network displayed in plan view
AddPressureProfLabels	Creates labels for a pressure network displayed in a profile view
AddPressureSectLabels	Creates labels for a pressure network displayed in a section view
BreakPipeRun	Breaks a pressure pipe in a pipe run into two separate pipe runs at a selected point
BreakPressurePipe	Breaks a pressure pipe in a part-based pressure network into two separate pressure pipes at a selected point
BreakPressurePipeInPV	Breaks a pressure pipe into two separate pressure pipes at a selected point in a profile view
ChangePrPipeElevation	Modifies the level of multiple selected parts of a part-based pressure network by moving them in the profile view
ChangePrPipeSlope	Modifies the slope of multiple connected pressure network parts in a part-based pressure network
ClosePressurePlanLayout	Saves the pressure network and closes the ribbon tab
ClosePressureProfileLayout	Saves the pressure network and closes the ribbon tab
ConnectPressureGravity	Connects a pressure network pipe to a gravity network structure
ConvertTo3DSolids	Converts pipe networks and pressure networks to AutoCAD solids
CreateAlignFromPressureNW	Creates an alignment from a pressure network
CreatePbPrNetworkFromObj	Creates a path-based pressure network from an AutoCAD entity or an Autodesk Civil 3D object
CreatePipeRunFromParts	Creates a path-based pipe run from parts in an existing pressure network
CreatePressureFromIndModel	Converts industry model data to an Autodesk Civil 3D pressure network
CreatePressureNetwork	Creates a part-based pressure network using the Pressure Network Plan Layout tools
CreatePressureNetworkfromObj	Creates a part-based pressure network from an AutoCAD entity or an Autodesk Civil 3D object
CreatePressureNetworkRef	Creates a reference to a pressure network data shortcut
CreatePressurePartList	Creates a set of pressure network parts to be used when creating and editing pressure networks
CreatePressurePartListFull	Creates a parts list that contains all of the part types and associated sizes that exist in the currently selected part catalogue
CreatePRNetworkByPath	Creates a path-based pressure network using the Pressure Network Layout Tools
CurvePipeInPV	Converts a straight pressure pipe segment to a curved segment in profile view
DetachPipeRun	Detaches the pipe run parts from the underlying pipe run alignment
DeletePartsInPV	Deletes selected pressure network parts from the pressure network
DisconnectPressureGravity	Disconnects a pressure network pipe from a gravity network structure
EditAncillaryStyle	Edits the style of an ancillary in a pressure network
EditAncillaryProps	Edits the properties of an ancillary in a pressure network
EditFittingProps	Edits the properties of a fitting in a pressure network
EditFittingStyle	Edits the style of a fitting in a pressure network
EditPipeRunProfile	Creates and edits a profile for a pipe run
EditPressureNetwork	Edits a pressure network in plan view using the Pressure Network Plan Layout tools
EditPressureNetworkInPV	Edits a pressure network in profile view using the Pressure Network Profile Layout tools
EditPressureNetworkProps	Edits the properties of a pressure network
EditPressurePartProps	Edits the properties of a pressure network part. Parts include pressure pipes, fittings and ancillary
EditPressurePipePartList	Edits the current pressure network parts list
EditPressurePipeProps	Edits the properties of a pipe in a pressure network
EditPressurePipeStyle	Edits the style of a pressure pipe in a pressure network
EditSectionPrNetworkProps	Edits properties of the selected pressure network section
FollowSurfaceInPV	Modifies pressure network parts so that they follow the level of the reference surface
MergePipeRuns	Merges two connected pipe runs into a single pipe run
MergePressureNetworks	Merges a pressure network into another pressure network
MovePressureParts	Repositions selected pressure network parts to a new location in the drawing
PressurePipesAndBends	Creates pressure network pipe segments in plan view and inserts bends at directional changes
PressurePipesAndBendsInPV	Creates part-based pressure network pipe segments in profile view and inserts vertical bends at directional changes
PressurePipeToPipe	Creates pressure network pipe segments in plan view and inserts deflected pipes at directional changes
RegenPressureSolid	Regenerates missing 3D solids for fittings and ancillaries
RelinkPipeRun	Relinks the pipe run parts with the underlying pipe run alignment if they have become detached
RemovePipeRunPI	Removes a point of intersection (PI) and its associated part from a pipe run in plan view
RemovePipeRunPVI	Removes a vertical point of intersection and its associated part from a pipe run in profile view
RunDepthCheck	Identifies pressure network parts that violate minimum and maximum depths
RunDesignCheck	Identifies open connections and pressure network parts that violate allowable parameters
SetPressureNetworkCatalogue	Specifies the pressure network catalogue, which is the source for the components that are used to create the parts list
ShowPressurePanorama	Opens the pressure network panorama to view and edit pressure network properties
ShowTabPressureNoSel	Displays the Pressure Network contextual tab
SlidePressureParts	Moves a group of parts along another pressure pipe
SwapPressureNetworkParts	Changes the type, family and/or size of selected parts in a pressure network