| E5130
|
FATAL ERROR: E5130
|
NO MILLING PATH FOUND IN DESIGN OPTIMIZATION REGION
|
|
|
Cause:
|
In a topological design optimization solution with 3-axis or 5-axis milling manufacturing constraints, there were no milling paths found. This typically is the result of a milling path alignment issue, or a non-design region being in front of the milling path.
|
|
|
Action:
|
One or more of the following should be investigated and corrected if needed:
- Check the
TOPVAR Bulk Data entry for a misaligned manufacturing constraint coordinate system.
- Check for a non-design region blocking the milling path.
|
|
|
Remarks:
|
See the
Autodesk Nastran Solver Reference Guide, Section 4,
Bulk Data for entry format.
|
