E5088

E5087	WARNING: E5088	MAXIMUM STATIC LOAD REACHED USING NONLINEAR MATERIAL SPECIFIED
	Cause:	A nonlinear static analysis was performed with one or more of the following nonlinear materials: CONCRETE, NITINOL, CREEP, or PLASTIC (field 4 MATS1 Bulk Data entry). The user applied load exceeded the material capability and the analysis terminated.
	Action:	Investigate the model for the following issues: Check that the nonlinear material parameters specified on the CONCRETE, NITINOL, CREEP, or MATS1 Bulk Data entry(s) and any associated TABLES1 entries referenced are valid and reasonable. Check that the model loading is reasonable and lower if necessary. Check the element quality in areas where the nonlinear material is active. Note that if results are desired at the point of termination, field 9 of the NLPARM Bulk Data entry must be set to ALL.
	Remarks:	See Autodesk Nastran Reference Guide, Section 4, Bulk Data, for entry format.