| E5085
|
WARNING: E5085
|
NO CONVERGENCE IN MAXIMUM NUMBER OF ITERATIONS PERMITTED
|
|
|
Cause:
|
The convergence tolerance (default 1.0E-5) for a sparse iterative solution could not be achieved in the maximum number of iterations permitted (default ten times the number of unconstrained degrees of freedom).
|
|
|
Action:
|
Change one or both of the following model parameters:
- Set the maximum number of iterations permitted, PARAM,
MAXSPARSEITER, to a larger value. A value of zero will cause the solver to iterate until convergence is reached.
- Set the convergence tolerance, PARAM,
SPARSEITERTOL, to a larger value.
|
|
|
Remarks:
|
See Autodesk Nastran Reference Guide, Section 5,
Parameters, for parameter format.
|
