Base class for user defined dependency nodes. More...

#include <MPxNode.h>

Inheritance diagram for MPxNode:

Public Types
enum	Type { kDependNode, kLocatorNode, kDeformerNode, kManipContainer, kSurfaceShape, kFieldNode, kEmitterNode, kSpringNode, kIkSolverNode, kHardwareShader, kHwShaderNode, kTransformNode, kObjectSet, kFluidEmitterNode, kImagePlaneNode, kParticleAttributeMapperNode, kCameraSetNode, kConstraintNode, kManipulatorNode, kMotionPathNode, kClientDeviceNode, kThreadedDeviceNode, kAssembly, kSkinCluster, kGeometryFilter, kBlendShape, kLast }
	Defines the type of node. More...

enum	SchedulingType { kParallel, kSerial, kGloballySerial, kUntrusted , kDefaultScheduling = kSerial, kSerialize = kSerial, kGloballySerialize = kGloballySerial }
	Defines the degree of parallelism of a node. More...

Public Member Functions
	MPxNode ()
	Constructor. More...

virtual	~MPxNode ()
	Destructor.

virtual void	postConstructor ()
	Post constructor. More...

virtual MStatus	compute (const MPlug &, MDataBlock &)
	This method should be overridden in user defined nodes. More...

virtual bool	getInternalValue (const MPlug &, MDataHandle &)
	This method is overridden by nodes that store attribute data in some internal format. More...

virtual bool	setInternalValue (const MPlug &, const MDataHandle &)
	This method is overridden by nodes that store attribute data in some internal format. More...

virtual int	internalArrayCount (const MPlug &) const
	This method is overridden by nodes that have internal array attributes which are not stored in Maya's datablock. More...

virtual void	copyInternalData (MPxNode *)
	This method is overridden by nodes that store attribute data in some internal format. More...

virtual MStatus	legalConnection (const MPlug &, const MPlug &, bool asSrc, bool &isLegal) const
	This method allows you to check for legal connections being made to attributes of this node. More...

virtual MStatus	legalDisconnection (const MPlug &, const MPlug &, bool asSrc, bool &isLegal) const
	This method allows you to check for legal disconnections being made to attributes of this node. More...

virtual MStatus	setDependentsDirty (const MPlug &plug, MPlugArray &plugArray)
	This method can be overridden in user defined nodes to specify which plugs should be set dirty based upon an input plug {plugBeingDirtied} which Maya is marking dirty. More...

virtual MStatus	preEvaluation (const MDGContext &context, const MEvaluationNode &evaluationNode)
	Prepare a node's internal state for threaded evaluation. More...

virtual MStatus	postEvaluation (const MDGContext &context, const MEvaluationNode &evaluationNode, PostEvaluationType evalType)
	Clean up node's internal state after threaded evaluation. More...

virtual SchedulingType	schedulingType () const
	When overridden this method controls the degree of parallelism supported by the node during threaded evaluation. More...

virtual void	getCacheSetup (const MEvaluationNode &, MNodeCacheDisablingInfo &, MNodeCacheSetupInfo &, MObjectArray &) const
	Provide node-specific setup info for the Cached Playback system. More...

virtual void	configCache (const MEvaluationNode &, MCacheSchema &) const
	Defines the node's behavior when participating in Cached Playback. More...

virtual MTimeRange	transformInvalidationRange (const MPlug &source, const MTimeRange &input) const
	Override this method to register this node as an Invalidation-Range-Transformation kernel (IRT kernel) An IRT kernel node will change the invalidation time range for its downstream nodes For example, Dynamics-solver will transform invalidation time range [a,b] to [a,+inf) And Clip-Time-Editor will send out the invalidation range for each of the clip [a,b] to ( [t0+a,t0+b] U [t1+a,t1+b] U [t2+a,t2+b] U ... More...

bool	hasInvalidationRangeTransformation () const
	Checks if this MPxNode derived node overrides the MPxNode::transformInvalidationRange method.

virtual MStatus	connectionMade (const MPlug &, const MPlug &, bool asSrc)
	This method gets called when connections are made to attributes of this node. More...

virtual MStatus	connectionBroken (const MPlug &, const MPlug &, bool asSrc)
	This method gets called when connections are broken with attributes of this node. More...

virtual MStatus	dependsOn (const MPlug &, const MPlug &, bool &depends) const
	This method may be overridden by the user defined node. More...

virtual bool	isPassiveOutput (const MPlug &) const
	This method may be overridden by the user defined node if it wants to provide output attributes which do not prevent value modifications to the destination attribute. More...

virtual MStatus	shouldSave (const MPlug &, bool &isSaving)
	This method may be overridden by the user defined node. More...

virtual MPlug	passThroughToOne (const MPlug &) const
	This method may be overridden by nodes that have a one-to-one relationship between an input attribute and a corresponding output attribute. More...

virtual bool	passThroughToMany (const MPlug &, MPlugArray &) const
	This method is overridden by nodes that want to control the traversal behavior of some Maya search algorithms which traverse the history/future of shape nodes looking for directly related nodes. More...

virtual Type	type () const
	Returns the type of node that this is. More...

virtual bool	isAbstractClass () const
	Override this class to return true if this node is an abstract node. More...

virtual bool	isTrackingTopology () const
	Override this class to return true if this node wants to track topology. More...

virtual MStringArray	getFilesToArchive (bool shortName=false, bool unresolvedName=false, bool markCouldBeImageSequence=false) const
	Use this method to return all external files used by this node. More...

virtual void	getExternalContent (MExternalContentInfoTable &table) const
	Returns the external content (files) that this node depends on. More...

bool	addExternalContentForFileAttr (MExternalContentInfoTable &, const MObject &attr) const
	Adds content info to the specified table from a file path attribute. More...

bool	setExternalContentForFileAttr (const MObject &attr, const MExternalContentLocationTable &)
	Sets content info in the specified attribute from the table. More...

virtual void	setExternalContent (const MExternalContentLocationTable &)
	Changes the location of external content in batch. More...

virtual MTypeId	typeId () const
	Returns the TYPEID of this node. More...

virtual MString	typeName () const
	Returns the type name of this node. More...

virtual MString	name () const
	Returns the name of this particular instance of this class. More...

virtual MObject	thisMObject () const
	Returns the MObject associated with this user defined node. More...

virtual MStatus	setExistWithoutInConnections (bool flag)
	This method specifies whether or not the node can exist without input connections. More...

virtual bool	existWithoutInConnections (MStatus *ReturnStatus=NULL) const
	Determines whether or not this node can exist without input connections. More...

virtual MStatus	setExistWithoutOutConnections (bool flag)
	This method specifies whether or not the node can exist without output connections. More...

virtual bool	existWithoutOutConnections (MStatus *ReturnStatus=NULL) const
	Determines whether or not this node can exist without output connections. More...

void	_setMPSafe (bool isMPSafe)
	This method is obsolete. More...

MDataBlock	_forceCache (const MDGContext &)
	This method is obsolete. More...

virtual bool	getInternalValueInContext (const MPlug &, MDataHandle &, MDGContext &)
	This method is obsolete. More...

virtual bool	setInternalValueInContext (const MPlug &, const MDataHandle &, MDGContext &)
	This method is obsolete. More...

virtual int	internalArrayCount (const MPlug &, const MDGContext &) const
	This method is obsolete. More...

Static Public Member Functions
static MStatus	addAttribute (const MObject &attr)
	This method adds a new attribute to a user defined node type during the type's initialization. More...

static MStatus	inheritAttributesFrom (const MString &parentClassName)
	This method allows a class of plugin node to inherit all of the attributes of a second class of plugin node. More...

static MStatus	attributeAffects (const MObject &whenChanges, const MObject &isAffected)
	This method specifies that a particular input attribute affects a specific output attribute. More...

static MStatus	attributeAffects (const MObject &whenChanges, const MObject &isAffected, bool affectsTopology)
	This method is an extension to the other version of the attributeAffects method. More...

static const char *	className ()
	Returns the name of this class. More...

Static Public Attributes
static MObject	message
	message attribute

static MObject	isHistoricallyInteresting
	is historically interesting attribute

static MObject	caching
	caching attribute

static MObject	state
	state attribute

static MObject	frozen
	frozen attribute

Protected Member Functions
virtual MDataBlock	forceCache ()
	USE _forceCache() IN SCRIPT. More...

virtual MStatus	setDoNotWrite (bool flag)
	USE _setDoNotWrite() IN SCRIPT. More...

virtual bool	doNotWrite (MStatus *ReturnStatus=NULL) const
	USE _doNotWrite() IN SCRIPT. More...

virtual void	setMPSafe (bool isMPSafe)
	This method is obsolete. More...

virtual MDataBlock	forceCache (const MDGContext &)
	This method is obsolete. More...

Detailed Description

Base class for user defined dependency nodes.

MPxNode is the the parent class for user defined dependency nodes. A dependency node is an object that resides in the dependency graph. It computes output attributes based on a set of input attributes. When an input changes, the compute method is called for each dependent output.

The dependency graph is made up of nodes that have connections between their attributes. When an attribute changes, recomputation propagates through the graph until all affected values have been updated.

When writing a dependency node, there is a very basic rule that should be observed. The outputs should be calculated only using the values of the inputs. All information about the world outside the node should come from input attributes. If this rule is not observed, then the results may be unpredictable.

Developers must decide whether to support the HasNoEffect setting of the state attribute. {HasNoEffect} means that a node should pass through all data without performing computations on it. For example, a deformer node will pass geometry through unmodified when state is set to HasNoEffect. It is up the the plug-in writer to observe the HasNoEffect mode if it is relevant to the type of node.

Examples:: AbcImport/AlembicNode.h, affectsNode/affectsNode.cpp, animCubeNode/animCubeNode.cpp, anisotropicShader/anisotropicShader.cpp, apiMeshShape/apiMeshCreator.h, arcLenNode/arcLenNode.cpp, backfillShader/backfillShader.cpp, blindDataShader/blindDataMesh.h, brickShader/brickShader.cpp, buildRotationNode/buildRotationNode.cpp, cellShader/cellShader.cpp, cgFx/cgfxShaderNode.cpp, cgFx/cgfxShaderNode.h, cgFx/cgfxVector.h, checkerShader/checkerShader.cpp, circleNode/circleNode.cpp, clearcoat.cpp, closestPointOnCurve/closestPointOnCurveNode.h, compositingShader/compositingShader.cpp, contrastShader/contrastShader.cpp, customComponentTagNode/customComponentTagNode.cpp, depthShader/depthShader.cpp, displacementShader/displacementShader.cpp, dx11Shader/dx11ConeAngleToHotspotConverter.h, dx11Shader/dx11Shader.cpp, dx11Shader/dx11Shader.h, exampleFalloff/smoothFalloffNode.cpp, exampleFalloff/smoothFalloffNode.h, exampleRampAttribute/exampleMRampAttribute.cpp, fileTexture/fileTexture.cpp, flameShader/flameShader.cpp, footPrintNode_AnimatedMaterial/footPrintNode_GeometryOverride_AnimatedMaterial.cpp, footPrintNode_GeometryOverride/footPrintNode_GeometryOverride.cpp, fullLoftNode/fullLoftNode.cpp, gammaShader/gammaShader.cpp, genericAttributeNode/genericAttributeNode.cpp, geometrytools.cpp, geomShader/geomShader.cpp, gpuCache/gpuCacheCmd.cpp, gpuCache/gpuCacheShapeNode.cpp, gpuCache/gpuCacheShapeNode.h, hlslShader/hlslShader.cpp, hlslShader/hlslShader.h, interpShader/interpShader.cpp, jitterNode/jitterNode.cpp, lambertShader/lambertShader.cpp, latticeNoise/latticeNoise.h, lavaShader/lavaShader.cpp, lightShader/lightShader.cpp, meshOpCmd/polyModifierNode.h, MetadataSample/tweakMetadataNode.h, mixtureShader/mixtureShader.cpp, multiCurveNode/multiCurveNode.cpp, noiseShader/noiseShader.cpp, onbShader/onbShader.cpp, phongShader/phongShader.cpp, pointOnMeshInfo/pointOnMeshInfoNode.h, pointOnSubdNode/pointOnSubdNode.h, renderAccessNode/renderAccessNode.cpp, sceneAssembly/adskPrepareRenderGlobals.h, sceneAssembly/assemblyReference.cpp, sceneAssembly/assemblyReference.h, shadowMatteShader/shadowMatteShader.cpp, shellNode/shellNode.cpp, shiftNode/shiftNode.cpp, simpleEvaluationNode/simpleEvaluationNode.cpp, simpleLoftNode/simpleLoftNode.cpp, simpleNoiseShader/simpleNoiseShader.cpp, simplePhysicsEngine/simplePhysicsEngine.cpp, simpleSimulationNode/simpleSimulationNode.cpp, simpleSkipNode/simpleSkipNode.cpp, sineNode/sineNode.cpp, slopeShader/slopeShaderNode.h, solidCheckerShader/solidCheckerShader.cpp, splitUVCmd/polyModifierNode.h, stringFormatNode/stringFormatNode.cpp, testMTopologyEvaluator/testMTopologyEvaluator.h, testNobjectNode/testNobjectNode.h, testNpassiveNode/testNpassiveNode.h, testNsolverNode/testNsolverNode.h, testNucleusNode/testNucleusNode.h, topologyTrackingNode/topologyTrackingNode.cpp, transCircleNode/transCircleNode.cpp, volumeShader/volumeShader.cpp, and weightListNode/weightListNode.cpp.

Member Enumeration Documentation

enum Type

Defines the type of node.

Enumerator
kDependNode	Custom node derived from MPxNode.
kLocatorNode	Custom locator derived from MPxLocatorNode.
kDeformerNode	Custom deformer derived from MPxDeformerNode.
kManipContainer	Custom container derived from MPxManipContainer.
kSurfaceShape	Custom shape derived from MPxSurfaceShape.
kFieldNode	Custom field derived from MPxFieldNode.
kEmitterNode	Custom emitter derived from MPxEmitterNode.
kSpringNode	Custom spring derived from MPxSpringNode.
kIkSolverNode	Custom IK solver derived from MPxIkSolverNode.
kHardwareShader	Custom shader derived from MPxHardwareShader.
kHwShaderNode	Custom shader derived from MPxHwShaderNode.
kTransformNode	Custom transform derived from MPxTransform.
kObjectSet	Custom set derived from MPxObjectSet.
kFluidEmitterNode	Custom fluid emitter derived from MpxFluidEmitterNode.
kImagePlaneNode	Custom image plane derived from MPxImagePlane.
kParticleAttributeMapperNode	Custom particle attribute mapper derived from MPxParticleAttributeMapperNode.
kCameraSetNode	Custom director derived from MPxCameraSet.
kConstraintNode	Custom constraint derived from MPxConstraint.
kManipulatorNode	Custom manipulator derived from MPxManipulatorNode.
kMotionPathNode	Custom motionPath derived from MPxMotionPathNode.
kClientDeviceNode	Custom threaded device derived from MPxThreadedDeviceNode.
kThreadedDeviceNode	Custom threaded device node.
kAssembly	Custom assembly derived from MPxAssembly.
kSkinCluster	Custom deformer derived from MPxSkinCluster.
kGeometryFilter	Custom deformer derived from MPxGeometryFilter.
kBlendShape	Custom deformer derived from MPxBlendShape.
kLast	Last value, used for counting.

enum SchedulingType

Defines the degree of parallelism of a node.

Enumerator
kParallel	This schedulingType indicates that the node can be evaluated concurrently to any other nodes without restrictions.
kSerial	Groups are formed for nodes having this ShedulingType when they are directly connected to each other. Within a same group nodes are guaranteed to not to be concurrently evaluated. However nodes in distinct groups can still be concurently be evaluated.
kGloballySerial	Nodes having the kGloballySerial SchedulingType are guaranteed not to be evaluated concurrently to any other node having the same schedulingType.
kUntrusted	Untrusted nodes are guaranteed not to be evaluately concurrently to any other node. Last value, used for counting
kDefaultScheduling	This method is obsolete. as of Maya2017, use kSerial
kSerialize	This method is obsolete. as of Maya2017, use kSerial
kGloballySerialize	This method is obsolete. as of Maya2017, use kGloballySerial

Constructor & Destructor Documentation

MPxNode ( )

Constructor.

The constructor should never call any methods from MPxNode or make any calls that require the existence of the MObject associated with the user defined node. The postConstructor method should be used to do any initialization of this kind.

Member Function Documentation

void postConstructor ( )

virtual

Post constructor.

Internally maya creates two objects when a user defined node is created, the internal MObject and the user derived object. The association between the these two objects is not made until after the MPxNode constructor is called. This implies that no MPxNode member function can be called from the MPxNode constructor. The postConstructor will get called immediately after the constructor when it is safe to call any MPxNode member function.

Reimplemented in MPxTransform, and MPxPolyTrg.

Examples:: anisotropicShader/anisotropicShader.cpp, apiMeshShape/apiMeshShape.h, backfillShader/backfillShader.cpp, cgFx/cgfxShaderNode.h, dx11Shader/dx11ConeAngleToHotspotConverter.h, exampleRampAttribute/exampleMRampAttribute.cpp, gameInputDevice/gameInputDevice.cpp, geometryOverrideExample1/geometryOverrideExample1.h, geometryOverrideExample2/geometryOverrideExample2.h, geometrySurfaceConstraint/geometrySurfaceConstraint.h, hlslShader/hlslShader.h, ik2Bsolver/ik2Bsolver.cpp, lineManip/lineManip.h, lineManipContainer/lineManipContainer.h, MayaPluginForSpreticle/spReticleLoc.h, pointManip/pointManip.h, randomizerDevice/randomizerDevice.cpp, renderAccessNode/renderAccessNode.cpp, sceneAssembly/assemblyDefinition.h, squareScaleManip/squareScaleManip.h, squareScaleManipContext/squareScaleManipContext.h, and udpDevice/udpDevice.cpp.

MStatus compute	(	const MPlug &	plug,
		MDataBlock &	block
	)

virtual

This method should be overridden in user defined nodes.

Recompute the given output based on the nodes inputs. The plug represents the data value that needs to be recomputed, and the data block holds the storage for all of the node's attributes.

The MDataBlock will provide smart handles for reading and writing this node's attribute values. Only these values should be used when performing computations.

When evaluating the dependency graph, Maya will first call the compute method for this node. If the plug that is provided to the compute indicates that the attribute was defined by the Maya parent node, the compute method should return MS::kUnknownParameter. When this occurs, Maya will call the internal Maya node from which the user-defined node is derived to compute the plug's value.

This means that a user defined node does not need to be concerned with computing inherited output attributes. However, if desired, these can be safely recomputed by this method to change the behaviour of the node.

Parameters

[in]	plug	plug representing the attribute that needs to be recomputed
[in]	block	data block containing storage for the node's attributes

Returns: Status code

Status Codes:

MS::kSuccess Compute was successful
MS::kFailure Compute failed

Reimplemented in MPxTransform, MPxPolyTrg, MPxEmitterNode, MPxFieldNode, MPxFluidEmitterNode, and MPxParticleAttributeMapperNode.

Examples:: AbcImport/AlembicNode.h, affectsNode/affectsNode.cpp, animCubeNode/animCubeNode.cpp, anisotropicShader/anisotropicShader.cpp, apiDirectionalLightShape/apiDirectionalLightShape.h, apiMeshShape/apiMeshCreator.h, apiMeshShape/apiMeshShape.h, arcLenNode/arcLenNode.cpp, backfillShader/backfillShader.cpp, blindDataShader/blindDataMesh.h, blindDataShader/blindDataShader.h, brickShader/brickShader.cpp, buildRotationNode/buildRotationNode.cpp, cellShader/cellShader.cpp, cgFx/cgfxShaderNode.h, cgFx/cgfxVector.h, checkerShader/checkerShader.cpp, circleNode/circleNode.cpp, clearcoat.cpp, closestPointOnCurve/closestPointOnCurveNode.h, compositingShader/compositingShader.cpp, contrastShader/contrastShader.cpp, customComponentTagNode/customComponentTagNode.cpp, cvColorNode/cvColorNode.cpp, depthShader/depthShader.cpp, displacementShader/displacementShader.cpp, dx11Shader/dx11ConeAngleToHotspotConverter.h, exampleFalloff/smoothFalloffNode.h, exampleRampAttribute/exampleMRampAttribute.cpp, fileTexture/fileTexture.cpp, flameShader/flameShader.cpp, footPrintManip/footPrintManip.cpp, footPrintNode/footPrintNode.cpp, footPrintNode_AnimatedMaterial/footPrintNode_GeometryOverride_AnimatedMaterial.cpp, footPrintNode_GeometryOverride/footPrintNode_GeometryOverride.cpp, footPrintNode_SubSceneOverride/footPrintNode_SubSceneOverride.cpp, fullLoftNode/fullLoftNode.cpp, gameInputDevice/gameInputDevice.cpp, gammaShader/gammaShader.cpp, genericAttributeNode/genericAttributeNode.cpp, geometrySurfaceConstraint/geometrySurfaceConstraint.h, geometrytools.cpp, geomShader/geomShader.cpp, hwPhongShader/hwPhongShader.h, interpShader/interpShader.cpp, jitterNode/jitterNode.cpp, lambertShader/lambertShader.cpp, latticeNoise/latticeNoise.h, lavaShader/lavaShader.cpp, lightShader/lightShader.cpp, MetadataSample/tweakMetadataNode.h, mixtureShader/mixtureShader.cpp, motionPathNode/motionPathNode.cpp, multiCurveNode/multiCurveNode.cpp, noiseShader/noiseShader.cpp, onbShader/onbShader.cpp, phongShader/phongShader.cpp, pointOnMeshInfo/pointOnMeshInfoNode.h, pointOnSubdNode/pointOnSubdNode.h, randomizerDevice/randomizerDevice.cpp, renderAccessNode/renderAccessNode.cpp, shadowMatteShader/shadowMatteShader.cpp, shellNode/shellNode.cpp, shiftNode/shiftNode.cpp, simpleEvaluationNode/simpleEvaluationNode.cpp, simpleLoftNode/simpleLoftNode.cpp, simpleNoiseShader/simpleNoiseShader.cpp, simplePhysicsEngine/simplePhysicsEngine.cpp, simpleSimulationNode/simpleSimulationNode.cpp, simpleSkipNode/simpleSkipNode.cpp, simpleSpring/simpleSpring.h, sineNode/sineNode.cpp, slopeShader/slopeShaderNode.h, solidCheckerShader/solidCheckerShader.cpp, splatDeformer/splatDeformer.cpp, squaresNode_noDepthTest/squaresNode_noDepthTest.cpp, sseDeformer/sseDeformer.cpp, stringFormatNode/stringFormatNode.cpp, swissArmyManip/swissArmyManip.cpp, testMTopologyEvaluator/testMTopologyEvaluator.h, testNobjectNode/testNobjectNode.h, testNpassiveNode/testNpassiveNode.h, testNsolverNode/testNsolverNode.h, testNucleusNode/testNucleusNode.h, topologyTrackingNode/topologyTrackingNode.cpp, transCircleNode/transCircleNode.cpp, udpDevice/udpDevice.cpp, volumeShader/volumeShader.cpp, vp2BlinnShader/vp2BlinnShader.h, and weightListNode/weightListNode.cpp.

bool getInternalValue	(	const MPlug &	plug,
		MDataHandle &	dataHandle
	)

virtual

This method is overridden by nodes that store attribute data in some internal format.

The internal state of attributes can be set or queried using the setInternal and internal methods of MFnAttribute.

When internal attribute values are queried via getAttr or MPlug::getValue this method is called.

Warning: Do not call getInternalValueInContext(const MPlug& , MDataHandle& , MDGContext& ) inside your override.

Note: All internal data should respect the current context, which may be obtained from MDGContext::current().

Parameters

[in]	plug	the attribute that is being queried
[out]	dataHandle	the dataHandle to store the attribute value

Returns

true the attribute was placed in the datablock
false could not handle the specified attribute, pass this request to the default handler

Examples:: apiMeshShape/apiMeshShape.cpp, apiMeshShape/apiMeshShape.h, cgFx/cgfxShaderNode.cpp, cgFx/cgfxShaderNode.h, customImagePlane/customImagePlane.cpp, dx11Shader/dx11Shader.cpp, dx11Shader/dx11Shader.h, glslShader/GLSLShader.cpp, glslShader/GLSLShader.h, gpuCache/gpuCacheShapeNode.cpp, hlslShader/hlslShader.cpp, hlslShader/hlslShader.h, hwPhongShader/hwPhongShader.h, and testMTopologyEvaluator/testMTopologyEvaluator.h.

bool setInternalValue	(	const MPlug &	plug,
		const MDataHandle &	dataHandle
	)

virtual

This method is overridden by nodes that store attribute data in some internal format.

The internal state of attributes can be set or queried using the setInternal and internal methods of MFnAttribute.

When internal attribute values are set via setAttr or MPlug::setValue this method is called.

Another use for this method is to impose attribute limits.

Warning: Do not call setInternalValueInContext(const MPlug& , const MDataHandle& , MDGContext& ) inside your override.

Note: All internal data should respect the current context, which may be obtained from MDGContext::current().

Parameters

[in]	plug	the attribute that is being set
[in]	dataHandle	the dataHandle containing the value to set

Examples:: apiMeshShape/apiMeshShape.cpp, apiMeshShape/apiMeshShape.h, cgFx/cgfxShaderNode.cpp, cgFx/cgfxShaderNode.h, customImagePlane/customImagePlane.cpp, dx11Shader/dx11Shader.cpp, dx11Shader/dx11Shader.h, glslShader/GLSLShader.cpp, glslShader/GLSLShader.h, gpuCache/gpuCacheShapeNode.cpp, hlslShader/hlslShader.cpp, hlslShader/hlslShader.h, hwPhongShader/hwPhongShader.h, MayaPluginForSpreticle/spReticleLoc.h, and testMTopologyEvaluator/testMTopologyEvaluator.h.

int internalArrayCount ( const MPlug & plug ) const

virtual

This method is overridden by nodes that have internal array attributes which are not stored in Maya's datablock.

This method is used by Maya to determine the non-sparse count of array elements during file io. If the internal array is stored sparsely, you should return the maximum index of the array plus one. If the internal array is non-sparse then return the length of the array.

This method does not need to be implemented for attributes that are stored in the datablock since Maya will use the datablock size.

If this method is overridden, it should return -1 for attributes which it does not handle. Maya will use the datablock size to determine the array length when -1 is returned.

Note: All internal data should respect the current context, which may be obtained from MDGContext::current().

Parameters

[in] plug the array plug

void copyInternalData ( MPxNode * node )

virtual

This method is overridden by nodes that store attribute data in some internal format.

On duplication this method is called on the duplicated node with the node being duplicated passed as the parameter. Overriding this method gives your node a chance to duplicate any internal data you've been storing and manipulating outside of normal attribute data.

Parameters

[in] node the node that is being duplicated

Reimplemented in MPxTransform.

Examples:: cgFx/cgfxShaderNode.h, dx11Shader/dx11Shader.cpp, dx11Shader/dx11Shader.h, and hlslShader/hlslShader.h.

MStatus legalConnection	(	const MPlug &	plug,
		const MPlug &	otherPlug,
		bool	asSrc,
		bool &	isLegal
	)		const

virtual

This method allows you to check for legal connections being made to attributes of this node.

You should return kUnknownParameter to specify that maya should handle this connection if you are unable to determine if it is legal.

Parameters

[in]	plug	attribute on this node
[in]	otherPlug	attribute on other node
[in]	asSrc	is this plug a source of the connection
[in]	isLegal	set this to true if the connection is legal, false otherwise

Returns: Status code

Status Codes:

MS::kSuccess Operation successful
MS::kUnknownParameter Unknown attribute

MStatus legalDisconnection	(	const MPlug &	plug,
		const MPlug &	otherPlug,
		bool	asSrc,
		bool &	isLegal
	)		const

virtual

This method allows you to check for legal disconnections being made to attributes of this node.

You should return kUnknownParameter to specify that maya should handle this disconnection if you are unable to determine if it is legal.

Parameters

[in]	plug	attribute on this node
[in]	otherPlug	attribute on other node
[in]	asSrc	is this plug a source of the connection
[out]	isLegal	set this to true if the disconnection is legal, false otherwise

Returns: Status code

Status Codes:

MS::kSuccess Operation successful
MS::kUnknownParameter Unknown attribute

MStatus setDependentsDirty	(	const MPlug &	plugBeingDirtied,
		MPlugArray &	affectedPlugs
	)

virtual

This method can be overridden in user defined nodes to specify which plugs should be set dirty based upon an input plug {plugBeingDirtied} which Maya is marking dirty.

The list of plugs for Maya to mark dirty is returned by the plug array {affectedPlugs}. This method handles both dynamic as well as non-dynamic plugs and is useful in the following ways:

Allows attributeAffects-style relationships to be handled for dynamically-added attributes. Since MPxNode::attributeAffects can only be used with non-dynamic attributes, use of this method allows a way for all attributes of a node to affect one another, both dynamic and non-dynamic.

Provides more flexible relationships than what is available with MPxNode::attributeAffects. For example, you may wish to not dirty plugs when the current frame is one. However, as the routine is called during dirty propagation, there are restrictions on what can be done within the routine, most importantly you must not cause any dependency graph computation. For details, see the IMPORTANT NOTE below.

This method is designed to work harmoniously with MPxNode::attributeAffects on the same node. Alternately, you can do all affects relationships within a yourNode::setDependentsDirty() implementation.

The body of a user-implemented setDependentsDirty() implementation might look like the following example, which causes the plug called "B" to be set dirty whenever plug "A" is changed, i.e. A affects B.

const   MString exampleNode::A( "A" );  // Dynamic attribute "A"
MObject exampleNode::attrB;     // Non-dynamic attribute "B"
MStatus exampleNode::setDependentsDirty(
        const MPlug &plugBeingDirtied,
        MPlugArray &affectedPlugs )
{
    // This example shows a dynamic attribute (A) affecting a
    // non-dynamic attribute (B). For an example of a dynamic
    // affecting a dynamic, please the the developer's toolkit
    // example plug-in, affectsNode.cpp.
    //
    if ( plugBeingDirtied.partialName() == A ) {
        // "A" is being dirtied. We want "A" to affect "B", so we
        // add "B" to the list of plugs for Maya to dirty. Once again,
        // please see the IMPORTANT NOTE about what you can and
        // cannot do within a setDependentsDirty() routine.
        //
        MObject thisNode = thisMObject();
        MPlug pB( thisNode, exampleNode::attrB );
        affectedPlugs.append( pB );
    }
    return( MS::kSuccess );
}

In the above example, whenever plugBeingDirtied is A, we add B to affectedPlugs so that Maya will dirty B and also any plugs which depend upon B.

For cases where multi compound attributes are dirtied, it is the programmer's responsibility to define ALL affects relationships. Dirtying the parent plug of a multi does not imply that all of its children will be marked dirty. Likewise, dirtying a child attribute does not imply the parent of the multi is dirty. This must be explicitly defined using the affected plug array. The following example demonstrates how one would dirty both the element affected and the parent plug.

MObject exampleNode::inputAttr;     // Non-dynamic multi-input attribute.
MObject exampleNode::outputAttr;    // Non-dynamic multi-output attribute.
MStatus exampleNode::setDependentsDirty(MPlug const & inPlug,
                                        MPlugArray  & affectedPlugs)
{
    if ( inPlug.attribute() != inputAttr ) {
        return MS::kSuccess;
    }
    MPlug outArrayPlug(thisMObject(),outputAttr);
    if (inPlug.isElement()) {
        // First dirty the output output element first.
        // Of course, dirty output element itself
        MPlug elemPlug = outArrayPlug.elementByLogicalIndex(
                                            inPlug.logicalIndex());
        affectedPlugs.append(elemPlug);
        // We also need to dirty the parent.
        //
        affectedPlugs.append(outArrayPlug);
    } else {
        // Mark the parent output plug as dirty.
        //
        affectedPlugs.append(outArrayPlug);
        // Also visit each element.
        //
        unsigned int i,n = outArrayPlug.numElements();
        for (i = 0; i < n; i++) {
            MPlug elemPlug = outArrayPlug.elementByPhysicalIndex(i);
            affectedPlugs.append(elemPlug);
        }
    }
    return MS::kSuccess;
}

IMPORTANT NOTE: since the setDependentsDirty() method is called during dirty propagation, you must be careful not to perform any dependency graph computations from within the routine. Instead, if you want to know the value of a plug, use MDataBlock::outputValue() because it will not result in computation (and thus recursion). In general, the majority of {setDependentsDirty()} methods which users will implement should involve only fixed relationships. In the rare occurrence where you need to look at plug values, please heed the warning with {MDataBlock::outputValue()} and use plugs which contain values which you know to be up to date prior to the start of dirty propagation.

Parameters

[in]	plugBeingDirtied	plug which is being set dirty by Maya
[in]	affectedPlugs	the programmer should add any plugs which they want to set dirty to this list.

Returns: Status code

Status Codes:

MS::kSuccess Dirtying was successful
MS::kFailure Dirtying failed

Examples:: AbcImport/AlembicNode.cpp, AbcImport/AlembicNode.h, affectsNode/affectsNode.cpp, apiMeshShape/apiMeshShape.h, dx11Shader/dx11Shader.cpp, dx11Shader/dx11Shader.h, fileTexture/fileTexture.cpp, footPrintNode_AnimatedMaterial/footPrintNode_GeometryOverride_AnimatedMaterial.cpp, footPrintNode_GeometryOverride/footPrintNode_GeometryOverride.cpp, glslShader/GLSLShader.cpp, glslShader/GLSLShader.h, simpleEvaluationNode/simpleEvaluationNode.cpp, and testMTopologyEvaluator/testMTopologyEvaluator.h.

MStatus preEvaluation	(	const MDGContext &	context,
		const MEvaluationNode &	evaluationNode
	)

virtual

Prepare a node's internal state for threaded evaluation.

During the evaluation graph execution each node gets a chance to reset its internal states just before being evaluated.

This code has to be thread safe, non-blocking and work only on data owned by the node.

The timing of this callback is at the discretion of evaluation graph dependencies and individual evaluators. This means, it should be used purely to prepare this node for evaluation and no particular order should be assumed.

This call will most likely happen from a worker thread.

When using Evaluation Caching or VP2 Custom Caching, preEvaluation() is called as part of the evaluation process. This function is not called as part of the cache restore process because no evaluation takes place in that case.

Parameters

[in]	context	Context in which the evaluation is happening. This should be respected and only internal state information pertaining to it should be modified.
[in]	evaluationNode	Evaluation node which contains information about the dirty plugs that are about to be evaluated for the context. Should be only used to query information.

Examples:: apiMeshShape/apiMeshShape.h, footPrintNode/footPrintNode.cpp, simpleEvaluationNode/simpleEvaluationNode.cpp, simpleSkipNode/simpleSkipNode.cpp, and testMTopologyEvaluator/testMTopologyEvaluator.h.

MStatus postEvaluation	(	const MDGContext &	context,
		const MEvaluationNode &	evaluationNode,
		PostEvaluationType	evalType
	)

virtual

Clean up node's internal state after threaded evaluation.

After the evaluation graph execution, each node gets a chance to update its internal states. For example, resetting draw state.

This code has to be thread safe, non-blocking and work only on data owned by the node.

This call will most likely happen from a worker thread.

When using Evaluation Caching or VP2 Custom Caching, postEvaluation() will be called as part of the evaluation process. In addition to its role in regular EM evaluation, it can also be used to notify VP2 to ensure correctness of VP2 cached buffers, and perform pull evaluation to ensure any internal secondary data is up to date after evaluation. Similar to preEvaluation() this function is not called as part of the cache restore process.

Parameters

[in]	context	Context in which the evaluation happened. This should be respected and only internal state information pertaining to it should be modified.
[in]	evaluationNode	Evaluation node which contains information about the dirty plugs that were evaluated for this context.
[in]	evalType	kEvaluatedIndirectly: The node's compute function handled evaluation. kEvaluatedDirectly: Evaluation was performed externally and the results injected back into the node. This would happen in situations such as extracting values from an external cache. The node needs to update any additional internal state based on the new values. kLeaveDirty: Evaluation was performed without updating this node. Internal state should be updated to reflect that the node is dirty.

Examples:: apiMeshShape/apiMeshShape.h, footPrintNode_AnimatedMaterial/footPrintNode_GeometryOverride_AnimatedMaterial.cpp, and footPrintNode_GeometryOverride/footPrintNode_GeometryOverride.cpp.

MPxNode::SchedulingType schedulingType ( ) const

virtual

When overridden this method controls the degree of parallelism supported by the node during threaded evaluation.

Returns: The scheduling type to be used for this node. Defaults to kDefaultScheduling

Examples:: AbcImport/AlembicNode.h, anisotropicShader/anisotropicShader.cpp, backfillShader/backfillShader.cpp, brickShader/brickShader.cpp, cellShader/cellShader.cpp, checkerShader/checkerShader.cpp, clearcoat.cpp, compositingShader/compositingShader.cpp, contrastShader/contrastShader.cpp, depthShader/depthShader.cpp, displacementShader/displacementShader.cpp, fileTexture/fileTexture.cpp, flameShader/flameShader.cpp, gammaShader/gammaShader.cpp, geometrytools.cpp, geomShader/geomShader.cpp, hwPhongShader/hwPhongShader.h, interpShader/interpShader.cpp, lambertShader/lambertShader.cpp, lavaShader/lavaShader.cpp, lightShader/lightShader.cpp, mixtureShader/mixtureShader.cpp, noiseShader/noiseShader.cpp, onbShader/onbShader.cpp, phongShader/phongShader.cpp, shadowMatteShader/shadowMatteShader.cpp, simpleNoiseShader/simpleNoiseShader.cpp, slopeShader/slopeShaderNode.h, solidCheckerShader/solidCheckerShader.cpp, testMTopologyEvaluator/testMTopologyEvaluator.h, and volumeShader/volumeShader.cpp.

void getCacheSetup	(	const MEvaluationNode &	evalNode,
		MNodeCacheDisablingInfo &	disablingInfo,
		MNodeCacheSetupInfo &	cacheSetupInfo,
		MObjectArray &	monitoredAttributes
	)		const

virtual

Provide node-specific setup info for the Cached Playback system.

This method will be called at EM partitioning time. It works in one of two ways.

It can state that the node supports Cached Playback and background evaluation. In this case it can use the cacheSetupInfo to configure preferences and requirements
It can state that this node cannot work with Cached Playback enabled and will therefore cause Cached Playback to be disabled. In this case it can use the disablingInfo to provide additional info about why Cached Playback is disabled.

In case the answer depends on the value of attributes (for example, a node can have multiple modes, some of them working with caching and some of them not), the node can add the attributes to the monitored attribute list so they can be monitored in case the value changes.

By default, this method states that Cached Playback is supported, but does not request to be cached by default.

Note that regardless of the preferences expressed by a node, Caching Rules can always override the preferences from this method. Caching Rules always have the last world. This method simply indicates the built-in Evaluation Cache rule used by Maya's default Caching Modes that this node is to be cached. Other rules can ignore or override this behavior.

Parameters

[in]	evalNode	This node's evaluation node, contains animated plug information
[out]	disablingInfo	Information about why the node disables Cached Playback to be reported to the user
[out]	cacheSetupInfo	Preferences and requirements this node has for Cached Playback
[out]	monitoredAttributes	Attributes impacting the behavior of this method that will be monitored for change

Reimplemented in MPxLocatorNode.

Examples:: apiMeshShape/apiMeshShape.cpp, apiMeshShape/apiMeshShape.h, simplePhysicsEngine/simplePhysicsEngine.cpp, simpleSimulationNode/simpleSimulationNode.cpp, and testMTopologyEvaluator/testMTopologyEvaluator.h.

void configCache	(	const MEvaluationNode &	evalNode,
		MCacheSchema &	schema
	)		const

virtual

Defines the node's behavior when participating in Cached Playback.

This method will be called at EM partitioning time, after rules evaluation.

Parameters

[in]	evalNode	This node's evaluation node, contains animated plug information
[in,out]	schema	Specification about what attributes to cache

Examples:: simplePhysicsEngine/simplePhysicsEngine.cpp.

MTimeRange transformInvalidationRange	(	const MPlug &	source,
		const MTimeRange &	input
	)		const

virtual

Override this method to register this node as an Invalidation-Range-Transformation kernel (IRT kernel) An IRT kernel node will change the invalidation time range for its downstream nodes For example, Dynamics-solver will transform invalidation time range [a,b] to [a,+inf) And Clip-Time-Editor will send out the invalidation range for each of the clip [a,b] to ( [t0+a,t0+b] U [t1+a,t1+b] U [t2+a,t2+b] U ...

)

Parameters

[in]	source	The source plug in this node where the dirty propagation comes from
[in]	input	The incoming invalidation range

Returns: The output invalidation range for all the dependents of plug 'source'

Warning: You cannot do any evaluation in this function, because it can be called in dirty-propagation; Do *not* call MPxNode::transformInvalidationRange from your override method

Note: If a plugin node have invalidation-range-transformation *conditionally* Only transform the invalidation range when attribute 'enableIRT' is set The plugin should call MPxNode::transformInvalidationRange to signal it does not perform any IRT

Examples:: simplePhysicsEngine/simplePhysicsEngine.cpp, and simpleSimulationNode/simpleSimulationNode.cpp.

MStatus connectionMade	(	const MPlug &	plug,
		const MPlug &	otherPlug,
		bool	asSrc
	)

virtual

This method gets called when connections are made to attributes of this node.

You should return kUnknownParameter to specify that maya should handle this connection or if you want maya to process the connection as well.

Only in very exceptional circumstances would you want to bypass maya's internal processing so when overriding this method the safest thing to do is to return the result from the base class as shown below.

MyChildNode::connectionMade(...)
{
    if( MyChildNode understands the attribute )
        doChildThing();
    return MyParentNode::connectionMade(...);
}
MyParentNode::connectionMade(...)
{
    if( MyParentNode understands the attribute )
        doParentThing();
    return MPxDeformerNode::connectionMade(...);
}

Parameters

[in]	plug	attribute on this node
[in]	otherPlug	attribute on other node
[in]	asSrc	is this plug a source of the connection

Returns: Status code

Status Codes:

MS::kSuccess Operation successful
MS::kUnknownParameter Unknown attribute

Examples:: apiMeshShape/apiMeshShape.cpp, apiMeshShape/apiMeshShape.h, and dx11Shader/dx11Shader.h.

MStatus connectionBroken	(	const MPlug &	plug,
		const MPlug &	otherPlug,
		bool	asSrc
	)

virtual

This method gets called when connections are broken with attributes of this node.

You should return kUnknownParameter to specify that maya should handle this connection or if you want maya to process the connection as well.

Only in very exceptional circumstances would you want to bypass maya's internal processing so when overriding this method the safest thing to do is to return the result from the base class as shown below.

MyChildNode::connectionBroken(...)
{
    if( MyChildNode understands the attribute )
        doChildThing();
    return MyParentNode::connectionBroken(...);
}
MyParentNode::connectionBroken(...)
{
    if( MyParentNode understands the attribute )
        doParentThing();
    return MPxDeformerNode::connectionBroken(...);
}

Parameters

[in]	plug	attribute on this node
[in]	otherPlug	attribute on other node
[in]	asSrc	is this plug a source of the connection

Returns: Status code

Status Codes:

MS::kSuccess Operation successful
MS::kUnknownParameter Unknown attribute

Examples:: apiMeshShape/apiMeshShape.cpp, and apiMeshShape/apiMeshShape.h.

MStatus dependsOn	(	const MPlug &	plug,
		const MPlug &	otherPlug,
		bool &	depends
	)		const

virtual

This method may be overridden by the user defined node.

It should only be required to override this on rare occasions.

This method determines whether a specific attribute depends on another attribute.

You should return kUnknownParameter to specify that Maya should determines the dependency (default).

This is mainly to define dependency of dynamic attributes, since attributeAffects does not work with dynamic attributes.

Parameters

[in]	plug	plug representing the attribute
[in]	otherPlug	plug representing the attribute to check for dependency
[out]	depends	boolean telling whether there is a dependency between the two attributes

Returns: Status code

Status Codes:

MS::kSuccess Operation successful
MS::kUnknownParameter Unknown attribute

Examples:: dx11Shader/dx11Shader.h, and glslShader/GLSLShader.h.

bool isPassiveOutput ( const MPlug & plug ) const

virtual

This method may be overridden by the user defined node if it wants to provide output attributes which do not prevent value modifications to the destination attribute.

For example, output plugs on animation curve nodes are passive. This allows the attributes driven by the animation curves to be set to new values by the user.

Parameters

[in] plug plug representing output in question

Returns: true indicates passive

Examples:: AbcImport/AlembicNode.cpp, and AbcImport/AlembicNode.h.

MStatus shouldSave	(	const MPlug &	plug,
		bool &	isSaving
	)

virtual

This method may be overridden by the user defined node.

It should only be required to override this on rare occasions.

This method determines whether a specific attribute of this node should be written out during a file save. The default behavior is to only write the value if it differs from the default and is not being supplied by a connection. This behavior should be sufficient in most cases. This method is not called for ramp attributes since they should always be written.

Parameters

[in]	plug	plug representing the attribute to be saved
[in]	isSaving	boolean telling whether to save or not

Returns: Status code

Status Codes:

MS::kSuccess Operation successful
MS::kUnknownParameter Unknown attribute

Examples:: apiMeshShape/apiMeshShape.cpp, apiMeshShape/apiMeshShape.h, cgFx/cgfxShaderNode.cpp, cgFx/cgfxShaderNode.h, and exampleRampAttribute/exampleMRampAttribute.cpp.

MPlug passThroughToOne ( const MPlug & plug ) const

virtual

This method may be overridden by nodes that have a one-to-one relationship between an input attribute and a corresponding output attribute.

This method is used by Maya to perform the following capabilities:

When this node is deleted, the delete command will rewire the source of the input attribute to the destination of the output attribute if the source and destination are connected to nodes that are not deleted.
History traversal algorithms such as the bakePartialHistory command use this method to direct its traversal through a shape's construction history.
The base class Maya implementation of passThroughToAll will call this method if passThroughToAll returns false.

Parameters

[in] plug the plug

Returns: The corresponding plug, or an empty plug if no corresponding plug exists

Examples:: customComponentTagNode/customComponentTagNode.cpp.

bool passThroughToMany	(	const MPlug &	plug,
		MPlugArray &	plugArray
	)		const

virtual

This method is overridden by nodes that want to control the traversal behavior of some Maya search algorithms which traverse the history/future of shape nodes looking for directly related nodes.

In particular, the Artisan paint code uses this method when searching for paintable nodes, and the disk cache code uses this method when searching for upstream cacheFile nodes.

If this method is not implemented or returns false, the base class Maya implementation of this method calls passThroughToOne and returns the results of that call.

Parameters

[in]	plug	the plug
[in]	plugArray	the corresponding plugs

Returns: true if plug was handled, false to invoke base class implementation

MPxNode::Type type ( ) const

virtual

Returns the type of node that this is.

This is used to differentiate user defined nodes that are derived off different MPx base classes.

It is not necessary to override this method.

Returns: Type of the node

Reimplemented in MPxAssembly, MPxGeometryFilter, MPxManipContainer, MPxHwShaderNode, MPxTransform, MPxThreadedDeviceNode, MPxHardwareShader, MPxMotionPathNode, MPxIkSolverNode, MPxClientDeviceNode, MPxSurfaceShape, MPxEmitterNode, MPxSpringNode, MPxLocatorNode, MPxImagePlane, MPxObjectSet, MPxFieldNode, MPxBlendShape, MPxDeformerNode, MPxFluidEmitterNode, MPxSkinCluster, MPxCameraSet, and MPxParticleAttributeMapperNode.

bool isAbstractClass ( ) const

virtual

Override this class to return true if this node is an abstract node.

An abstract node can only be used as a base class. It cannot be created using the 'createNode' command.

It is not necessary to override this method.

Returns: true if the node is abstract.

Reimplemented in MPxPolyTrg.

bool isTrackingTopology ( ) const

virtual

Override this class to return true if this node wants to track topology.

This is necessary to enable certain optimizations done when geometry created by this node does not alter topology.

It is not necessary to override this method.

Returns: true if the node wants to track topology.

Examples:: topologyTrackingNode/topologyTrackingNode.cpp.

MStatus addAttribute ( const MObject & attr )

static

This method adds a new attribute to a user defined node type during the type's initialization.

This method will only work during the static initialization method of the user defined node class. The initialization method is the one that is passed into MFnPlugin::registerNode. The attributes must first be created using one of the MFnAttribute classes, and can then be added using this method.

For compound attributes, the proper way to use this method is by calling it with the parent attribute. If a compound attribute is passed, this method will add all of its children. NOTE: A failure will occur if you attempt to call addAttribute() on the children of a compound attribute.

Parameters

[in] attr new attribute to add

Returns: Status code

Status Codes:

MS::kSuccess Operation successful
MS::kInvalidParameter Attribute is invalid or already added or child of a compound attribute is being added before the parent
MS::kFailure Method was not called during the node's initialize routine

Examples:: exampleFalloff/smoothFalloffNode.cpp, geometryReplicator/geometryReplicator.cpp, gpuCache/gpuCacheShapeNode.cpp, sceneAssembly/adskPrepareRenderGlobals.cpp, sceneAssembly/assemblyDefinition.cpp, sceneAssembly/assemblyReference.cpp, simpleEvaluationDraw/simpleEvaluationDraw.cpp, transformDrawNode/transformDrawNode.cpp, and uiDrawManager/uiDrawManager.cpp.

MStatus inheritAttributesFrom ( const MString & parentClassName )

static

This method allows a class of plugin node to inherit all of the attributes of a second class of plugin node.

This method will only work during the static initialization method of the user defined node class and must be called before any other attributes have been added. The initialization method is the one that is passed into MFnPlugin::registerNode.

A plugin node may only inherit attributes from one other class of plugin node. Attempting to call this method multiple times within a node's initialization method will result in an error.

Both node classes must be registered using the same MPxNode::Type.

Parameters

[in] parentClassName class of node to inherit attributes from

Returns: Status code

Status Codes:

MS::kSuccess Operation successful
MS::kInvalidParameter Class name is invalid or was registered with a different MPxNode::Type.
MS::kFailure Method was called outside of the node's initialize routine, or was called multiple times, or was called after attributes had already been added.

MStatus attributeAffects	(	const MObject &	whenChanges,
		const MObject &	isAffected
	)

static

This method specifies that a particular input attribute affects a specific output attribute.

This is required to make evaluation efficient. When an input changes, only the affected outputs will be computed. Output attributes cannot be keyable - if they are keyable, this method will fail.

This method must be called for every attribute dependency when initializing the node's attributes. The attributes must first be added using the MPxNode::addAttribute method. Failing to call this method will cause the node not to update when its inputs change. If there are no calls to this method in a node's initialization, then the compute method will never be called.

This method will only work during the static initialization method of the user defined node class. The initialization method is the one that is passed into MFnPlugin::registerNode. As a result, it does not work with dynamic attributes. For an alternate solution which handles dynamic as well as non-dynamic attributes refer to MPxNode::setDependentsDirty.

Parameters

[in]	whenChanges	input attribute - MObject that points to an input attribute that has already been added
[in]	isAffected	affected output attribute - MObject that points to an output attribute that has already been added

Returns: Status code

Status Codes:

MS::kSuccess Operation successful
MS::kInvalidParameter At least one of the attributes is invalid or has not been added to this node using the addAttribute routine
MS::kFailure Method was not called during the node's initialize routine

MStatus attributeAffects	(	const MObject &	whenChanges,
		const MObject &	isAffected,
		bool	affectsTopology
	)

static

This method is an extension to the other version of the attributeAffects method.

It allows specifying where the input attribute can affect the topology of the output attribute through this relationship.

Calling this method with the affectsTopology parameter set to true is the same as calling the 2-parameter version of this method. Calling it with false can enable certain optimizations done when geometry created by this node does not alter topology.

Parameters

[in]	whenChanges	input attribute - MObject that points to an input attribute that has already been added
[in]	isAffected	affected output attribute - MObject that points to an output attribute that has already been added
[in]	affectsTopology	whether this relationship affects topology or not

Returns: Status code

Status Codes:

MS::kSuccess Operation successful
MS::kInvalidParameter At least one of the attributes is invalid or has not been added to this node using the addAttribute routine
MS::kFailure Method was not called during the node's initialize routine

MStringArray getFilesToArchive	(	bool	shortName = `false`,
		bool	unresolvedName = `false`,
		bool	markCouldBeImageSequence = `false`
	)		const

virtual

Use this method to return all external files used by this node.

This file list will be used by the File > Archive zip feature, maya.exe -archive and the `file -q -list` mel command.

Only include files that exist.

If shortName is true, return just the filename portion of the path (can be obtained with MString::baseName()). Otherwise, return a full path.

If unresolvedName is true, return the path before any resolution has been done (i.e leave it as a relative path, include unexpanded environment variables, tildes, ".."s etc). Otherwise, resolve the file path and return an absolute path (to resolve with standard Maya path resolution, use MFileObject::resolvedFullName()).

Parameters

[in]	shortName	If true, only add the filename of the path
[in]	unresolvedName	If true, add paths before any resolution, rather than absolute paths.
[in]	markCouldBeImageSequence	If true, append an asterisk after any file path that could be an image sequence (note: only used by maya.exe -archive)

Returns: Array of file paths

Examples:: AbcImport/AlembicNode.h.

void getExternalContent ( MExternalContentInfoTable & table ) const

virtual

Returns the external content (files) that this node depends on.

The table populated by this method must include the location of all the content (files) used by this node, including those that do not exist. See MExternalContentInfoTable for details.

Keys used to add items to this table will be the same that get passed to setExternalContent through its MExternalContentLocationTable parameter to perform a batched change of content location.

When implementing getExternalContent, you are responsible for forwarding the call to the base class when it makes sense to do so, so that base classes can also add their external content to the table.

The default implementation does nothing.

Parameters

[out] table Content information table that this method must populate.

Examples:: AbcImport/AlembicNode.cpp, AbcImport/AlembicNode.h, dx11Shader/dx11Shader.cpp, dx11Shader/dx11Shader.h, glslShader/GLSLShader.cpp, glslShader/GLSLShader.h, gpuCache/gpuCacheShapeNode.cpp, and sceneAssembly/assemblyDefinition.h.

bool addExternalContentForFileAttr	(	MExternalContentInfoTable &	table,
		const MObject &	attr
	)		const

Adds content info to the specified table from a file path attribute.

This method is a helper for derived clases implementing getExternalContent(). It augments the external content info table passed in with an entry describing external content whose location is described by the specified attribute.

The method will not overwrite existing items, i.e. items with the same key. (attribute name). In this context, overwriting an item means the caller has called this function twice with the same attribute, or that two separate but identically named attributes were used. If replacing an entry is the desired effect, it is the caller's responsibility to erase the previous item first.

Parameters

[out]	table	The table in which the new entry will be added.
[in]	attr	The attribute for which the plug value will be queried for a location.

Returns: true if an item was sucessfully added to the table. false if the attribute does not describe a non-empty location, or an item with the same key was already present in the table.

bool setExternalContentForFileAttr	(	const MObject &	attr,
		const MExternalContentLocationTable &	table
	)

Sets content info in the specified attribute from the table.

This method is a helper for derived clases implementing setExternalContent(). It assigns a value to a plug with the one from the table whose key is the same as the passed in attribute name.

The method will not write to the plug if the attribute is not found in the table.

Parameters

[in]	attr	The attribute of the plug we want to write to.
[in]	table	A table which may hold or not the value for a given plug.

Returns: true if the plug was successfully written to. false if no entry in the table was named after the attribute or if no plug was found.

void setExternalContent ( const MExternalContentLocationTable & table )

virtual

Changes the location of external content in batch.

This is useful in the context of content relocation. This will be called while the scene is being loaded to apply path changes performed externally. Consequently, interaction with the rest of the scene must be kept to a minimum. It is however valid to call this method outside of scene loading contexts.

The keys in the map must be the same as the ones provided by the node in getExternalContent. The values are the new locations.

When implementing setExternalContent, you are responsible for forwarding the call to the base class when it makes sense to do so, so that base classes can also set their external content.

The default implementation does nothing.

Parameters

[in] table Key->location table with new content locations.

Examples:: AbcImport/AlembicNode.cpp, AbcImport/AlembicNode.h, dx11Shader/dx11Shader.cpp, dx11Shader/dx11Shader.h, glslShader/GLSLShader.cpp, glslShader/GLSLShader.h, gpuCache/gpuCacheShapeNode.cpp, and sceneAssembly/assemblyDefinition.h.

const char * className ( )

static

Returns the name of this class.

Returns: The name of this class.

MTypeId typeId ( ) const

virtual

Returns the TYPEID of this node.

The TYPEID is a four byte identifier that uniquely identifies this type of node to the binary file format.

It is not necessary to override this method.

Returns: Type id of the node

Reimplemented in MPxAssembly.

Examples:: dx11Shader/dx11ConeAngleToHotspotConverter.h, dx11Shader/dx11Shader.h, and gpuCache/gpuCacheShapeNode.cpp.

MString typeName ( ) const

virtual

Returns the type name of this node.

The type name identifies the node type to the ASCII file format. It may also be used with the MEL command "createNode" to create a new node of this type.

It is not necessary to override this method.

Returns: Type name of the node

Reimplemented in MPxAssembly.

Examples:: exampleFalloff/smoothFalloffNode.h, and sceneAssembly/adskPrepareRenderGlobals.h.

MString name ( ) const

virtual

Returns the name of this particular instance of this class.

Each object in the dependency graph has a name. This name will be used by the UI and by MEL.

It is not necessary to override this method.

Returns: Name of the node

Reimplemented in MPxAssembly.

Examples:: topologyTrackingNode/topologyTrackingNode.cpp.

MObject thisMObject ( ) const

virtual

Returns the MObject associated with this user defined node.

This makes it possible to use MFnDependencyNode or to construct plugs to this node's attributes.

It is not necessary to override this method.

Returns: MObject handle for this node

Reimplemented in MPxAssembly, and MPxManipContainer.

MStatus setExistWithoutInConnections ( bool flag )

virtual

This method specifies whether or not the node can exist without input connections.

If a node connected to this node is deleted resulting in no more input connections and if this flag is false, then this node will be deleted.

Parameters

[in] flag true if this node can exist without input connections, false otherwise

Status Codes:

MS::kSuccess operation successful
MS::kFailure this MPxNode has not been initialized properly. Make sure this method is not being called from the constructor.

Reimplemented in MPxAssembly.

bool existWithoutInConnections ( MStatus * ReturnStatus = NULL ) const

virtual

Determines whether or not this node can exist without input connections.

If a node connected to this node is deleted resulting in no more input connections and if this flag is false, then this node will be deleted.

Parameters

[out] ReturnStatus Status code.

Returns: true is this node can exist without input connections, false otherwise

Status Codes:

MS::kSuccess operation successful
MS::kFailure this MPxNode has not been initialized properly. Make sure this method is not being called from the constructor.

Reimplemented in MPxAssembly.

MStatus setExistWithoutOutConnections ( bool flag )

virtual

This method specifies whether or not the node can exist without output connections.

If a node connected to this node is deleted resulting in no more output connections and if this flag is false, then this node will be deleted.

Parameters

[in] flag true if this node can exist without output connections, false otherwise

Status Codes:

MS::kSuccess operation successful
MS::kFailure this MPxNode has not been initialized properly. Make sure this method is not being called from the constructor.

Reimplemented in MPxAssembly.

bool existWithoutOutConnections ( MStatus * ReturnStatus = NULL ) const

virtual

Determines whether or not this node can exist without output connections.

If a node connected to this node is deleted resulting in no more output connections and if this flag is false, then this node will be deleted.

Parameters

[out] ReturnStatus Status code.

Returns: true is this node can exist without output connections, false otherwise

Status Codes:

MS::kSuccess operation successful
MS::kFailure this MPxNode has not been initialized properly. Make sure this method is not being called from the constructor.

Reimplemented in MPxAssembly.

MDataBlock forceCache ( )

protectedvirtual

USE _forceCache() IN SCRIPT.

Get the datablock for this node at the current evaluation context.

If there is no datablock then one will be created.

Note: This should be used only in places where fast access to the datablock outside of a compute is critical such as the transformUsing method of MPxSurfaceShape.

Warning: Do not override this method.

Returns: The datablock

Reimplemented in MPxAssembly.

MStatus setDoNotWrite ( bool flag )

protectedvirtual

USE _setDoNotWrite() IN SCRIPT.

Use this method to mark the "do not write" state of this proxy node.

If set, this node will not be saved when the Maya model is written out.

NOTES: 1. Plug-in "requires" information will be written out with the model when saved. But a subsequent reload and resave of the file will cause these to go away. 2. If this node is a DAG and has a parent or children, the "do not write" flag of the parent or children will not be set. It is the developerﾒs responsibility to ensure that the resulting scene file is capable of being read in without errors due to unwritten nodes.

Parameters

[in] flag True if the user node should not be saved.

Reimplemented in MPxAssembly.

bool doNotWrite ( MStatus * ReturnStatus = NULL ) const

protectedvirtual

USE _doNotWrite() IN SCRIPT.

Use this method to query the "do not write" state of this proxy node.

True is returned if this node will not be saved when the Maya model is written out.

Parameters

[out] ReturnStatus

Reimplemented in MPxAssembly.

void setMPSafe ( bool flag )

protectedvirtual

This method is obsolete.

Set a flag to specify if a user defined shading node is safe for multi-processor rendering.

[as of Maya 2019]

Deprecated:: Override schedulingType() to set thread safety instead.

For a shading node to be MP safe, it cannot access any shared global data and should only use attributes in the datablock to get input data and store output data.

NOTE: This should be called from the postConstructor() method for shading node plug-ins only. If a shading node is non-safe, then it will only be useful during single processor rendering.

Parameters

[in] flag True if user node is safe, false if non-safe.

Reimplemented in MPxAssembly.

MDataBlock forceCache ( const MDGContext & context )

protectedvirtual

This method is obsolete.

If you are going to use the datablock for evaluation then you should make sure you have set your current context accordingly.

[as of Maya 2018]

Deprecated:: Use the method forceCache() instead. If needed, use MDGContextGuardto switch the context.

For example,

{ MDGContextGuard contextGuard( MDGContext( 3.0 ) ); MDataBlock timeBlock = myNode.forceCache(); do_some_time_stuff( timeBlock ); Context is automatically restored when Guard is destroyed }

Note: All other API methods accepting a context will make that context current for the duration of the call. This method is different in that it presumes you intend to further interact with the datablock, requiring a persistent change in context.

Warning: Do not override this method.

Parameters

[in] context

Returns: The datablock in given context

void _setMPSafe ( bool flag )

This method is obsolete.

Set a flag to specify if a user defined shading node is safe for multi-processor rendering.

[as of Maya 2019]

Deprecated:: Override schedulingType() to set thread safety instead.

For a shading node to be MP safe, it cannot access any shared global data and should only use attributes in the datablock to get input data and store output data.

NOTE: This should be called from the postConstructor() method for shading node plug-ins only. If a shading node is non-safe, then it will only be useful during single processor rendering.

Parameters

[in] flag True if user node is safe, false if non-safe.

MDataBlock _forceCache ( const MDGContext & context )

This method is obsolete.

Script use only, same as forceCache(const MDGContext& )

[as of Maya 2018]

Deprecated:: Use the method _forceCache() instead. If needed, use MDGContextGuard to switch the context.

bool getInternalValueInContext	(	const MPlug &	plug,
		MDataHandle &	dataHandle,
		MDGContext &	ctx
	)

virtual

This method is obsolete.

[as of Maya 2018]

Deprecated:: Use the method getInternalValue(const MPlug&, MDataHandle&) instead. If needed, use MDGContext::current() to get the context.

Warning: This method's default behavior has changed from MAYA 2017 to MAYA 2018.
The default behaviour is to call the virtual method MPxNode::getInternalValue( const MPlug&, MDataHandle& ) for any context ( ~~only for normal context~~ ).

Parameters

[in]	plug	the attribute that is being queried
[out]	dataHandle	the dataHandle to store the attribute value
[in]	ctx	the context the method is being evaluated in

Returns

true the attribute was placed in the datablock
false could not handle the specified attribute, pass this request to the default handler

bool setInternalValueInContext	(	const MPlug &	plug,
		const MDataHandle &	dataHandle,
		MDGContext &	ctx
	)

virtual

This method is obsolete.

[as of Maya 2018]

Deprecated:: Use the method setInternalValue(const MPlug&, const MDataHandle&) instead. If needed, use MDGContext::current() to get the context.

Warning: This method's default behavior has changed from MAYA 2017 to MAYA 2018.
The default behaviour is to call the virtual method MPxNode::setInternalValue( const MPlug&, const MDataHandle& ) for any context ( ~~only for normal context~~ ).

Parameters

[in]	plug	the attribute that is being set
[in]	dataHandle	the dataHandle containing the value to set
[in]	ctx	the context the method is being evaluated in

Returns

true the attribute was set
false could not handle the specified attribute, pass this request to the default handler

int internalArrayCount	(	const MPlug &	plug,
		const MDGContext &	ctx
	)		const

virtual

This method is obsolete.

[as of Maya 2018]

Deprecated:: Use the method internalArrayCount(const MPlug&) instead.

Parameters

[in]	plug
[in]	ctx

The documentation for this class was generated from the following files:

MPxNode.h
MPxNode.cpp

Public Types

Public Member Functions

Static Public Member Functions

Static Public Attributes

Protected Member Functions

Detailed Description

Member Enumeration Documentation

Constructor & Destructor Documentation

Member Function Documentation