Example of along X direction one-way in Y (model machining)

This example shows you how to create an area clearance toolpath with a toolpath order of along X, one-way in Y. This uses the 3D_Pockets.dgk model in the Examples folder.

1. Calculate the block and create a 10 mm Ball Nose tool.
2. Click Home tab > Toolpath Setup panel > Toolpath Connections to display the Toolpath connections dialog.
3. On the Toolpath connections dialog:
   1. Select the Start and end point tab.
   2. For the Start point select a Use of Absolute.
   3. Enter Coordinates of 0, 0, 10.
   4. Click Accept.
4. Click Home tab > Create Toolpaths panel > Toolpaths to display the Strategy Selector dialog.
5. From the 3D Area Clearance category, select the Model Area Clearance strategy and click OK.
6. On the Order page, select Level from the Order By list , and:
   1. Change the Sorting method to .
   2. Change the Name to Offset AC _ Along X _ 1 Way Y.
   3. Click Calculate.
      
      

      The link moves show the effect of the sorting option.

      Looking at the isometric view: